Submittal Transmittal

Transcription

1 Submittal Transmittal Standard St. Joe's - Sonntag Pavillion St. Joseph s Hospital 350 W. Thomas Road Phoenix, AZ 8503 Date: 8/28/20 To: Tracy Lee Orcutt Winslow 3003 N Central Ave Phoenix, AZ 8502 Tel: (602) Fax: (602) Project # 5690A Tel: Fax: Kitchell Contractors Inc of AZ Reference Number: 0079 From: David Brown Kitchell Contractors Inc of AZ 707 E Highland Ave, Suite 90 Phoenix, AZ 8506 Tel: (602) Fax: (602) Transmitted For Delivered Via Approval Tracking Number Submittal Package No Qty Due Date Package Action Sheetrock Gypsum Product Data 9/2/20 Items Qty Item Action 2 3 Joint Compound Product Data Sheetrock Glass-Mat Product Data Sheetrock Gypsum Panel Product Data Cc: Contact Name Company Name Copies Remarks Please review the attached Sheetrock Gypsum Product Data Submittal. This does not appear to be a submittal from a sub-contractor. It is an incomplete submittal. " liner board is not a substitute for densglas. Sheetrock is an approved manufacturer, please submit all of the gypsum products that are specified, not just two (one of which is incorrect). Digitally signed by David Br own Date: :46:2507'00' REJECTED Corrections or comments made on the shop drawings during this review do not relieve contractor from compliance with requirements of the drawings and specifications. This check is only for review of the general conformance with the design concept of the project and general compliance with the information given in the contract documents. The contractor is responsible for: Confirming and correlating all quantities and techniques of construction, coordinating his or her work with that of all other trades and performing all work in a safe and satisfactory manner. Tracy Lee :27:48-07'00' Signature Prolog Manager Printed on: 8/28/20 KCI_Production_Standardized Signed Date Page of

2

3

4 Submittal Sheet ( ) Sheetrock Glass-Mat Liner Panels High-performance glass-mat panels with moisture and mold resistance for use in: Sheetrock brand cavity shaft wall systems and Sheetrock brand area separation wall systems Direct substitute for Sheetrock brand gypsum liner panels and Sheetrock brand Mold Tough gypsum liner panels when prolonged weather exposure is anticipated UL Classified as to fire resistance, surface burning characteristics and noncombustibility Comprehensive product and system testing ensures long-term performance and safety Advantages Limitations Product Data Sheetrock brand glass-mat liner panels have a noncombustible, moisture- and mold-resistant gypsum core that is encased in a moisture- and mold-resistant glass mat. The panels are UL Classified as to fire resistance (Type SLX) and feature double-beveled edges for easy installation. Panel may be substituted for Sheetrock gypsum liner panels and Sheetrock Mold Tough gypsum liner panels in all Sheetrock shaft wall and area separation wall systems. Note: These Sheetrock glass-mat liner panels have been tested for fire resistance, structural performance and sound control only when used with Sheetrock shaft wall and area separation wall framing components. All Sheetrock shaft wall and area separation wall system components must be used together to ensure superior system performance and safety. Substitutions of any components are not recommended and are not endorsed by the United States Gypsum Company. Mold Resistant High resistance to mold and mildew. Resists Water Glass-mat sheathing facer on both sides sheds water. Quick, Dry Installation Quick score-and-snap, no sawing or special tools. Exposure Can be exposed to weather for up to 2 months after application. Warrantied Performance Sheetrock glass-mat liner panel is guaranteed for five years against manufacturing defects and has a 2-month limited-exposure warranty.. Avoid exposure to sustained temperatures exceeding 25 F (52 C). 2. Sheetrock glass-mat liner panels offer resistance to normal weather conditions but are not intended for constant exposure to water. Protect this and all similar materials from immersion in water and the eroding effects of cascading water. 3. Non-load-bearing. 4. Please reference Sheetrock brand glass-mat liner panels warranty sheet (WB2484) for full list of limitations. 5. Not for use in unlined air-supply ducts. Size Panels are " (25.4 mm) thick x 24" (609.6 mm) wide and available in 8', 0' and 2' standard lengths; other lengths available by special order. Weight Approx. 4.0 lbs/sf (4000 lbs/msf) Labeling Each panel bears the Underwriters Laboratories, Inc. mark as evidence of UL Classifications as to fire resistance, surface burning characteristics and noncombustibility. Flexural Strength Parallel 82 lbf., per ASTM test method C473 Perpendicular 230 lbf., per ASTM test method C473 R Value 0.65, per ASTM test method C58 Test Data Moisture and Sheetrock glass-mat liner panels comply with ASTM C77 section for water resistance. Mold Resistance In independent lab tests conducted on " Sheetrock glass-mat liner panels at the time of manufacture per ASTM D3273, Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber, the panel score was 0. This ASTM lab test may not accurately represent the mold performance of building materials in actual use. Given unsuitable project conditions during storage, installation or after completion, any building material can be overwhelmed by mold. To manage the growth of mold, the best and most cost-effective strategy is to protect building products from water exposure during storage and installation and after completion of the building. This can be accomplished by using good design and construction practices.

5 Compliance Sheetrock glass-mat gypsum liner panels comply with ASTM C658, C396. Per ASTM E36, noncombustible gypsum core. Surface Burning Characteristics: Class A, as defined in IBC Section 803., flame spread is 20, smoke developed is 0, when tested in accordance with ASTM E84. Submittal Approvals Job Name Contractor Date Product Information See usg.com for the most up-to-date product information. Trademarks The following trademarks used herein are owned by USG Corporation or its subsidiaries: Sheetrock, Mold Tough, the fluorescent green color, USG. Notice We shall not be liable for incidental and consequential damages, directly or indirectly sustained, nor for any loss caused by application of these goods not in accordance with current printed instructions or for other than the intended use. Our liability is expressly limited to replacement of defective goods. Any claim shall be deemed waived unless made in writing to us within thirty (30) days from date it was or reasonably should have been discovered. Safety First! Follow good safety/industrial hygiene practices during installation. Wear appropriate personal protective equipment. Read MSDS and literature before specification and installation. Manufactured by United States Gypsum Company 550 West Adams Street Chicago, IL USG-4YOU ( ) usg.com WB2483/ , United States Gypsum Company Printed in U.S.A.

6 Submittal Sheet Sheetrock Gypsum Panels Regular and Firecode Cores Quality interior wall and ceiling panels at low cost Fire-resistant dry construction Quick installation and decoration Score and snap easily Resist cracking and warping Specialized types for all systems Sheetrock brand gypsum panels are factory-fabricated, composed of a fire-resistant gypsum core encased in heavy natural-finish face paper and strong liner paper on the back side. The face paper is folded around the long edges to reinforce and protect the core, and the ends are square-cut and finished smooth. Long edges of panels are tapered, allowing joints to be reinforced and concealed with a USG joint treatment system. Sheetrock gypsum panels are available with three core types for standard construction uses. Regular core With a regular core, available in three thicknesses for specific purposes. /2 Panels Recommended for single-layer application in residential construction. 3/8 Panels Lightweight, applied principally in the double-wall system over wood framing, and in repair and remodeling. /4 Panels Lightweight, low-cost, utility gypsum panels, used as base layer for improving sound control in doublelayer steel and wood-stud partitions, and for use over old wall and ceiling surfaces. Also for forming curved surfaces with short radii. Firecode Core Firecode C Core 5/8 Type X Gypsum Panels Provide additional fire resistance over regular panels. /2 and 5/8 Type C Gypsum Panels Specially formulated mineral core provides fire resistance superior to that offered by Firecode Core gypsum panels. Limitations Finishing and Decorating. Avoid exposure to sustained temperatures exceeding 25 F (52 C). 2. Avoid exposure to excessive, repetitive or continuous moisture before, during and after installation. Eliminate sources of moisture immediately. 3. Non-loadbearing. 4. Fire-resistance ratings achieved when assembled in accordance with UL designs. For high-quality finishing results, USG recommends the following products: Sheetrock ready-mixed joint compounds Sheetrock setting-type joint compounds Sheetrock joint tape Sheetrock First Coat primer Sheetrock paper-faced metal bead and trim Sheetrock Tuff-Hide primer-surfacer Painting products and systems should be used which comply with recommendations and requirements in Appendixes of ASTM C840. For priming and decorating with paint, texture or wall covering, follow manufacturer s directions for materials used. All surfaces, including applied joint compound, must be thoroughly dry, dust-free, and not glossy. Prime with Sheetrock First Coat primer or with an undiluted, interior latex flat paint with high-solids content. Allow to dry before decorating. To improve fastener concealment, where gypsum panel walls and ceilings will be subjected to severe artificial or natural side lighting and be decorated with a gloss paint (egg shell, semi-gloss or gloss), the gypsum panel

7 surface should be skim coated with joint compound. This equalizes suction and texture differences between the drywall face paper and the finished joint compound before painting. As an alternative to skim coating, or when a Level 5 finish is required, use Sheetrock Tuff Hide primer-surfacer. Product Data Size: /4, 3/8, /2 and 5/8 x 48 wide; 8 4 long. /2 and 5/8 also available in 54 wide. Weight: /4.2 lbs/sf; 3/8.4 lbs/sf; /2.6 lbs/sf; 5/8 2.2 lbs/sf. Thermal Resistance R : For /2 thickness: 0.45 F x ft. 2 x h/btu (0.08 K x m 2 /W). Thermal Coefficient of Expansion: Unrestrained: F (4-38 C): 9.0 x 0 6 in./in./ F (6.2 x 0 6 mm/mm/ C) (6.2 µm/m/ C). Hygrometric Coefficient of Expansion: Unrestrained: 5-90% r.h. 7.2 x 0 6 in./in./% r.h. (7.2 x 0 6 mm/mm/% r.h.) (7.2 µm/m/% r.h.). Packaging: 2 panels per bundle. Test Data Surface Burning Characteristics: Flame spread 5, smoke developed 0. Maximum Frame Spacing Direct Application Panel thickness () Location Application method (2) Max. frame spacing o.c. Drywall Construction in. mm in. mm Compliance Meets ASTM C396. Single-Layer 3/8 9.5 ceilings (3) perpendicular (4) parallel (4) /2 2.7 ceilings perpendicular 24 (5)(6) 60 parallel (4) sidewalls parallel or perpendicular parallel (4) /8 5.9 ceilings (6) perpendicular sidewalls parallel or perpendicular Double-Layer 3/8 9.5 ceilings (7) perpendicular sidewalls perpendicular or parallel 24 (8) 60 /2 and 5/8 2.7 and 5.9 ceilings perpendicular or parallel 24 (8) 60 sidewalls perpendicular 24 (8) 60 () 5/8 thickness is recommended for the finest single-layer construction, providing increased resistance to fire and transmission of sound; /2 for single-layer application in new residential construction and remodeling; and 3/8 for repair and remodeling over existing surfaces. (2) Long edge position relative to framing. (3) Not recommended below unheated spaces. (4) Not recommended if water-based texturing material is to be applied. (5) Max. spacing 6 if water-based texturing material is to be applied. (6) If /2 Sheetrock interior ceiling board is used in place of gypsum panels, max. spacing is 249 o.c. for perpendicular application with weight of unsupported insulation not exceeding.3 psf., 6 o.c. with weight of unsupported insulation not exceeding 2.2 psf. (7) Adhesive must be used to laminate 3/8 board for double-layer ceilings. (8) Max spacing 6 o.c. if fire rating required. Submittal Approvals: Job Name Contractor Date Trademarks The following trademarks used herein are owned by United States Gypsum Company or a related company: Durabond, Easy Sand, Firecode, Sheetrock, Tuff Hide. Note Products described here may not be available in all geographic markets. Consult your U.S. Gypsum Company sales office or representative for information. Notice We shall not be liable for incidental and consequential damages, directly or indirectly sustained, nor for any loss caused by application of these goods not in accordance with current printed instructions or for other than the intended use. Our liability is expressly limited to replacement of defective goods. Any claim shall be deemed waived unless made in writing to us within thirty (30) days from date it was or reasonably should have been discovered. Safety First! Follow good safety and industrial hygiene practices during handling and installation of all products and systems. Take necessary precautions and wear the appropriate personal protective equipment as needed. Read material safety data sheets and related literature on products before specification and/or installation. Manufactured by United States Gypsum Company 550 West Adams Street Chicago, IL USG.4YOU ( ) usg.com WB473/rev , United States Gypsum Company Printed in U.S.A.