ABSTRACT SHEET Name of Work : Main Building Proposed Construction of RSETI Building On Plot No. 7/1 & 9 At-Babupeth, Chandrapur

Transcription

1 ABSTRACT SHEET Name of Work : Main Building Proposed Construction of RSETI Building On Plot No. 7/1 & 9 At-Babupeth, Chandrapur Sr.No. Particulars Unit Qty. Rate Amount 1 Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking or spreading as directed, preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting as necessary Rate as per C.S.R. Item No. 1 BDA -1/P.N.1 A) i. Lift upto 1.5 m. Cum ii. Lift above 1.5 m to 3.00 m.depth Cum Filling in plinth and floors with contractors approved material / Sand / stone dust in 15cm. to 20cm. layers including watering and compaction Rate as per C.S.R. Item No.8 BDA 11/P.N.4 Cum Providing and laying in situ, cement concrete in 1:4:8 of trap/ granite/quartzite/gneiss metal for foundation and bedding including bailing out water, plywood/steel formwork, compacting, finishing uneven and honeycombed surface curing etc. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) Rate as per C.S.R. Item No. 2 BDE -1C/P.N.9 Cum 67.16

2 4 Providing and casting situ cement concrete M20 of trap / granite /quartzite/ gnriss metal for R.C.C. Footing like raft, grillages, strip foundation & footing of RCC columns & steel stanction including bailing out water, plywood/steel formwork, compaction, vuring & roughening the surface if sepcile finish is to be provided finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface etc. (Excluding reinforcement & structural steel including cover block). The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) etc. Rate as per C.S.R. Item No. 2 BDF -3/P.N.13 Cum Filling in plinth and floors with approved excavated materials in 15 cm. to 20 cm. layers including watering and compaction CSR. No. : 7 BDA. 10/Page No. 3 Cum Providing and casting in situ cement concrete M20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed design and drawings or as directed, including steel centering, plywood/steel formwork, compaction, finishing roughening the surface if special finish is to be provided and curing etc. Including use of plastisizer wherever necessary as directed by Engineer (Excluding reinforcement, including cover block). The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) Rate as per C.S.R. Item No. 3 BDF -5/P.N.14 Cum 43.31

3 7 Providing and casting in situ cement concrete M20 of trap / granite /quartzite /gneiss metal for R.C.C. beams and lintels as per detailed design and drawings or as directed,including steel centering, plywood/steel formwork steel props, compaction, finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. Including use of plastisizer wherever necessary as directed by Engineer-In-charge (Excluding reinforcement, including cover block). The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) Rate as per C.S.R. Item No. 5 BDF -6A/P.N.15 Cum Providing and casting in situ cement concrete M20 of trap / quartzite / granite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, plywood/steel formwork, steel props, compaction finishing roughening the surface if special finish is to be provided and curing etc.(excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) Rate as per C.S.R. Item No. 5 BDF -6A/P.N.15 Cum Providing and casting in situ cement concrete of required grade of trap / quartzite /granite /gneiss metal for R.C.C. canopy as per detailed design and drawings including steel centering, Rate as per C.S.R. Item No.7 BDF 10A/P.N.18 Cum 4.31

4 10 Providing and casting in situ cement concrete M20 of trap / granite /quartzite /gneiss metal for R.C.C slabs and landings as per detailed design and drawings including steel centering, plywood /steel formwork, steel props, compaction, finishing roughening the surface if special finish is to be provided with fan hook box of 2 mm thick M.S.Sheet rectangular size 180 mm x 100 mm with required depth, with holes or notches, as required, bottom and top lids of 1.6 mm thick M.S.Sheet Rate as per C.S.R. Item No. 11 BDF -8A/P.N.18 Cum Providing and casting in situ cement concrete of required grade of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. (Excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed) a) For C.C.M-20 Rate as per C.S.R. Item No. 13 BDF -13A/P.N.20 Cum Providing and casting in situ cement concrete of required grade of trap / granite / gneiss / quartzite metal for R.C.C. pardi 75 mm thick including steel centering, plywood /steel formwork, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening them if special finish is to be provided and curing etc.(excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.( Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed) Rate as per C.S.R. Item No. 18 BDF -11A/P.N.22 Cum 4.95

5 13 Providing and fixing in position mild steel/hysd bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed. Rate as per C.S.R. Item No.20 BDF 17/P.N.23 MT Providing Burnt Brick masonry cement mortar 1:6 in foundations and plinth of inner walls/in plinth of external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering Rate as per C.S.R. Item No. 2 BDG -1/P.N.24 Cum Providing Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in super structure including striking joints, racking out joints wateringand scaffolding Rate as per C.S.R. Item No. 4 BDG -5/P.N.24 Cum Providing Burnt Brick masonry type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm. diameter/2 hoop iron strips 25 mm x 1.6 mm placed at every third course, properly bent and bounded at ends scaffolding, racking out joints and watering Rate as per C.S.R. Item No.6 BDG -7/P.N.25 Sqm Providing and fixing factory made precast door/window frames of C.C. M-40 grade of section 100 mm x 60 mm including Rate as per C.S.R. Item no.20bdt /P.N.106 Rmt Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing.providing groove at joint of B.B.Masonry and concrete members Rate as per C.S.R. Item No.3 BDL -1/P.N.39 Sqm

6 19 Providing internal cement plaster 12mm thick in a single coat in cement mortar 1:5 without neeru finish to concrete or brick surface in all positions including scaffolding and curing.providing groove at joint of B.B.Masonry and concrete members Rate as per C.S.R. Item No.3 BDL -2/P.N.39 Sqm Providing sand faced plaster for external portion in cement mortar using Kharsalia / Kasaba or similar type of sand, in all positions including base coat of 15 mm. Thick in C.M. 1:4 using water proofing compound at 1 kg per cement bag, curing the same for not less than 3 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains, making grooves and curing for fourteen days scaffolding etc. Rate as per C.S.R. Item No.11 BDL -7/P.N.41 Sqm Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. Rate as per C.S.R. Item No. 14 BDL 10 /P.N.41 Sqm Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, a) For 35 mm thick Sqm b) For 32 mm thick Sqm Providing and fixing mild steel grill work for windows, ventilators, etc. required 20 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting Rate as per C.S.R. Item No. 1 BDU 1A/P.N.124 Sqm a)providing and fixing steel windows of various sizes as per detailed drawings with welded square bars 12 mm at 10cm centre to centre without hot dip Zinc coating without/with ventilator including fabrication, glazing with non-acetinic / plain /obscured glass panels of approved type and quality, all fixtures and fastenings without teak wood boxing, and architraves and finishing with one coat of primer (Sample to be got approved from Ex. Engineer before use) Rate as per PWD., C.S.R. Item No.31 BDT 53-A/P.N.110 Sqm 24.30

7 25 Providing and laying cement concrete flooring 50 mm thick with 1:2:4 cement concrete laid to proper level and slope in alternate bays, including compacting, PVC/ Glass/Aluminum strips at joints, marking lines to give appearance of tiles of 30 cm x 30 cm or other size laid diagonally/square etc. finishing smooth (with extra cement) in any colour as directed and curing Rate as per PWD., C.S.R. Item No.5 BDM 6-A/P.N.54 Sqm Providing and fixing plain cement tiles of size 25 cm x 25 cm and 20 mm thick for dado and skirting in required position after making the wall portion to required level with C.M.1:4 and fixing tiles with ready made adhesive including filling joints with neat cement slurry, curing, rubbing, polishing and cleaning Rate as per PWD., C.S.R. Item No.7 BDM 9/P.N.54 Sqm Providing and Laying ceramic tiles of approved quality, required size and 5.5.mm thickness for flooring in required position laid on bed of C.M.1:4 including cement float, filling joint with white / colour cement slurry, cleaning, curing, Rate as per C.S.R. Item No.20 BDM /P.N.57 Sqm Providing and fixing ceramic tiles of approved quality, required size and 5.5.mm thickness for dado and skirting in required position with ready made adhesive mortar of approved quality in required position after making the wall portion in level in plaster of C.M. 1:4 including joint filling with white/colour cement slurry cleaning curing Rate as per C.S.R. Item No.21 BDM /P.N.57 Sqm Providing and laying polished Kota Stone slabs 20mm to 25 mm thick for treads and risers of steps and staircases, with rounded nosing and groove at edge for the treads, on a bed of C.M. 1:4 including cement float filling joints with neat cement slurry, curing, polishing and cleaning Rate as per C.S.R. Item No.35 BDM -226/P.N.57 Sqm 49.20

8 30 Providing and applying putty to old / new plastered surfaces in two coats to receive approved paint in all positions including all materials,labour scaffolding and curing etc. Rate as per C.S.R., Item No.15 BDP/ P.N.76 Sqm Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces (excluding the primer coat) Rate as per C.S.R. Item No.11 BDP 5A/P.N.78, Sqm Providing and applying washable Acrylic emulsion paint of approved colour and shade to existing surface in two coats including scaffolding, preparing the surface to receive paint including primer coat etc. Rate as per C.S.R. Item No.13 BDP 7E/P.N.76, Sqm Providing and casting in situ cement concrete M20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed design and drawings or as directed, including steel centering, plywood/steel formwork, compaction, finishing roughening the surface if special finish is to be provided and curing etc. Including use of plastisizer wherever necessary as directed by Engineer (Excluding reinforcement, including cover block). The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) Rate as per C.S.R. Item No. 3 BDF -5/P.N.14 Cum 1.61

9 34 Providing and casting in situ cement concrete M20 of trap / granite /quartzite /gneiss metal for R.C.C. beams and lintels as per detailed design and drawings or as directed,including steel centering, plywood/steel formwork steel props, compaction, finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. Including use of plastisizer wherever necessary as directed by Engineer-In-charge (Excluding reinforcement, including cover block). The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) Rate as per C.S.R. Item No. 5 BDF -6A/P.N Providing and casting in situ cement concrete M20 of trap / quartzite / granite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, plywood/steel formwork, steel props, compaction finishing roughening the surface if special finish is to be provided and curing etc.(excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) Rate as per C.S.R. Item No. 5 BDF -6A/P.N Providing and casting in situ cement concrete M20 of trap / granite /quartzite /gneiss metal for R.C.C slabs and landings as per detailed design and drawings including steel centering, plywood /steel formwork, steel props, compaction, finishing roughening the surface if special finish is to be provided with fan hook box of 2 mm thick M.S.Sheet rectangular size 180 mm x 100 mm with required depth, with holes or notches, as required, bottom and top lids of 1.6 mm thick M.S.Sheet Rate as per C.S.R. Item No. 11 BDF -8A/P.N

10 37 Providing and fixing in position mild steel/hysd bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed. Rate as per C.S.R. Item No.20 BDF 17/P.N.23 MT Providing Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in super structure including striking joints, racking out joints wateringand scaffolding Rate as per C.S.R. Item No. 4 BDG -5/P.N.24 Cum Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing.providing groove at joint of B.B.Masonry and concrete members Rate as per C.S.R. Item No.3 BDL -1/P.N.39 Sqm Providing internal cement plaster 12mm thick in a single coat in cement mortar 1:5 without neeru finish to concrete or brick surface in all positions including scaffolding and curing.providing groove at joint of B.B.Masonry and concrete members Rate as per C.S.R. Item No.3 BDL -2/P.N.39 Sqm Providing sand faced plaster for external portion in cement mortar using Kharsalia / Kasaba or similar type of sand, in all positions including base coat of 15 mm. Thick in C.M. 1:4 using water proofing compound at 1 kg per cement bag, curing the same for not less than 3 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains, making grooves and curing for fourteen days scaffolding etc. Rate as per C.S.R. Item No.11 BDL -7/P.N.41 Sqm Providing and applying washable Acrylic emulsion paint of approved colour and shade to existing surface in two coats including scaffolding, preparing the surface to receive paint including primer coat etc. Rate as per C.S.R. Item No.13 BDP 7E/P.N.76, Sqm

11 43 Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days (Sample and brand is to be got approved from Ex. Engineer before use) Rate as per C.S.R. Item No.23 BDO 8A/P.N.71 Sqm Net Qty 0.00