Document: Collection: Technical Data sheets Modified: 24/06/2016 Created: 24/06/2016

Transcription

1 PPX System Detail Drawings 1 of 14 Document: Collection: Technical Data sheets Modified: 24/06/2016 Created: 24/06/2016 Armourcoat Ltd Morewood Close Sevenoaks Kent TN13 2HU T: +44(0) F: +44(0) UK Company VAT Reg: Substrate Build-Up Existing substrate (Brick, Concrete, Block Cement, Firbre Board etc) Armourcoat PPX adhesive 4-6mm (Notched Trowel) CN8 mechanical anchor fixing (thickness to provide adequate U Value) (4-6mm) Armourcoat approved alkali resistent reinforcing Mesh R160 in two layers to match the approved sample Armourcoat Sealer 56

2 PPX System Detail Drawings 2 of 14 Fixing Arrangement 300 max Fixings at a maximum of 300mm centres at building corner 200 min 200 min Staggered insulation board joints at building corner. 300 max 300 max 300 max AC approved insulation fixings one in each corner of the board set 50mm in each direction and one in the centre of each board Centre fixing required when a board spans over 800mm 300 max Fixings at a maximum of 300mm centres around all openings. 1200mmx600mm AC approved insulation board. Staggered insulation board joints at building corner minimum 200 x 300mm glass fibre reinforcing mesh scrim bedded in adhesive to all window/door corners on top of main reinforcing coat. substitute for formal advice. Armourcoat Ltd, its employees and agents will not be liable for any loss or damage, of any kind, arising out of or in connection with the use of this document. Please refer to the company disclaimer for further details.

3 PPX System Detail Drawings 3 of 14 Base Bead Detail Fungicidal wash to be applied if required Armourcoat Primer to applied as specified adhesive to be applied with a notched trowel, grain size and colour to client s approval Armourcoat PPX adhesive Basecoat 4-6mm, reinforced with alkali resistant mesh R160 Sealer 56 Wemico PVC base profile clip with mesh 150 Wemico 9 series system starter track mechanically fixed at 300mm centres Existing substrate Ground level may vary, Base bead to be kept at least150mm above ground level. NB: DPC must not be bridged

4 PPX System Detail Drawings 4 of 14 Window Sill Window Sloped window cill 30 Silicone sealant Fungicidal wash to be applied if required Armourcoat primer to be applied as specified adhesive to be applied with a notched trowel Armourcoat PPX adhesive Basecoat 4-6mm, reinforced with alkali resistant Mesh R160 Existing substrate

5 PPX System Detail Drawings 5 of 14 Window/Door Head Detail (1) Fungicidal wash to be applied if required Armourcoat Primer to be applied as specified adhesive to be applied with a notched trowel Existing substrate adhesive 4-6mm, reinforced with alkali resistant Mesh R160 Wemico 3707 corner bead, bedded into PPX Basecoat adhesive with Mesh R160 Window Wemico Frameseal bead

6 PPX System Detail Drawings 6 of 14 Window/Door Head Detail (2) Fungicidal wash to be applied if required Armourcoat primer to be applied as specified adhesive to be applied with a notched trowel + Mesh R160 Existing substrate adhesive 4-6mm, reinforced with alkali resistant Mesh R160 Wemico 3707 corner bead, bedded into PPX basecoat adhesive with Mesh R160 Window Wemico Frameseal bead substitute for formal advice. Armourcoat Ltd, its employees and agents will not be liable for any loss or damage, of any kind, arising out of or in connection with the use of this document. Please refer to the company disclaimer for further details.

7 PPX System Detail Drawings 7 of 14 Building External Corner Staggered insulation joints at building corner Wemico 3707 corner bead, bedded into PPX Basecoat adhesive with Mesh R160 Existing Substrate adhesive 4-6mm, reinforced with alkali resistant Mesh R160 adhesive to be applied with a notched trowel Armourcoat Primer to be applied as specified Fungicidal wash to be applied if required

8 PPX System Detail Drawings 8 of 14 Building Internal Corner Fungicidal wash to be applied if required Armourcoat Primer to be applied as specified adhesive to be applied with a notched trowel adhesive 4-6mm, reinforced with alkali resistant Mesh R160 Existing substrate Wemico 3707 corner bead, bedded into PPX Basecoat adhesive with Mesh R160 Staggered insulation joints at building corner

9 PPX System Detail Drawings 9 of 14 Movement Joint 1. Fungicidal wash to be applied if required 2. Armourcoat Primer to be applied as specified 3. adhesive to be applied with a notched trowel 4. adhesive 4-6mm, reinforced with alkali resistant Mesh R Existing substrate Fir Tree fixings at minimum 300mm centres 11. Wemico PVC movement bead

10 PPX System Detail Drawings 10 of 14 Roof Abutment Silicone sealant Fungicidal wash to be applied if required Armourcoat primer to be applied as specified adhesive to be applied with a notched trowel adhesive 4-6mm, reinforced with alkali resistant Mesh R160 Existing Substrate

11 PPX System Detail Drawings 11 of 14 Verge (1) Weather/fascia board Silicone sealant Weather/fascia board Armourcoat fungicidal wash to be applied if required Armourcoat Primer to be applied as specified adhesive 4-6mm, reinforced with alkali resistant Mesh R160 adhesive to be applied with a notched trowel Existing Substrate

12 PPX System Detail Drawings 12 of 14 Verge (2) Silicone sealant Weather/fascia board Armourcoat fungicidal wash to be applied if required Armourcoat Primer to be applied as specified adhesive to be applied with a notched trowel adhesive 4-6 mm, reinforced with alkali resistant Mesh R160 Existing Substrate

13 PPX System Detail Drawings 13 of 14 Party Wall (1) 1. Armourcoat fungicidal wash to be applied if required 2. Armourcoat primer to be applied as specified 3. adhesive to be applied with a notched trowel 4. Armourcoat PPX basecoat adhesive 4-6mm, reinforced with alkali resistant mesh Existing substrate Wemico 9245 full depth stop bead fixed at 300mm centres 11. Silicone sealant

14 PPX System Detail Drawings 14 of 14 Party Wall (2) 1. Fungicidal wash to be applied if required 2. Armourcoat Primer to be applied as specified 3. adhesive to be applied with a notched trowel 4. adhesive 4-6mm, reinforced with alkali resistant Mesh R Existing substrate Wemico 9245 full depth stop bead fixed at 300mm centres 11. Silicone sealant