EMBLETON. Corella façade. Mackay façade

Transcription

1 EMBLETON ArcherBarrine façade façade Corella façade Mackay façade All façade images are artist's impressions only. These images may contain internal or external upgrade items such as feature renders and timber look garage doors. Images contain items not supplied by Burbank, which include furniture, landscaping, fencing and external lighting. See your New Home Consultant for full specifications.

2 bring the outdoors in alfresco option walk-in-robes for everyone LIVING 3960x5870 LIVING 3960x BED x BED x3800 KITCHEN MEALS 4000x3260 KITCHEN MEALS 4000x3260 BED x3690 BED x3690 WC WC pantry envy BATH BATH WIP L'DRY WIP P'DR L'DRY P'DR RUMPUS 3430x2900 STUDY 2760x2690 RUMPUS 3430x2900 STUDY 2760x2690 space to work, rest and play GARAGE 6000x5510 GARAGE 6000x5510 VOID VOID ENS ENS ENTRY ENTRY BED x3830 BED x3830 PORCH PORCH ground floor first floor say hello a welcoming hallway FLOORPLAN OPTIONS Want to put a personal touch on your home? Speak to your New Home Consultant about the exciting range of ready-to-go design options for this floorplan. Popular design options include: Kitchen option uite upgrade under stairs Gas log fireplace in living Master suite retreat option option home width 8.03m home length 19.19m residence sqm 21.26sq porch 4.73sqm 0.51sq garage 36.22sqm 3.90sq total sqm 25.67sq Listed details based on Streeton façade floorplan (illustrated)

3 Kitchen OPTION K1 Provide 16mm laminated full height end panel to bench and refrigerator space laminated open shelf above. Upgrade 600mm under-bench oven and hot plate to 900mm upright oven and canopy rangehood. Add 800mm overhead cupboards and MDF bulheads to either side of rangehood. Add 32mm to island bench to accommodate microwave space and pot drawer to replace 600mm cupboard. OPTION ENS1 Provide uite upgrade by relocating the opening and providing 800mm wide opening bulkhead above in lieu of 720mm flush panel hinged door. Provide 1200mm x 900mm tiled shower base in lieu of 900mm x 900mm tiled shower base, 1027mm x 850mm window in lieu of 1027mm x 1450mm window and relocated toilet. Living 3580x5260OPTION LD1 Kitchen IP2 Create room plaster OPTION IP1 Provide boxed out site built plaster lined fire place bulkhead over and 2no. 500mm shelves. Heat & Glo SL 550 balanced flue Gas log fire. OPTION EP1 Living 3580x5260 IP2 Create room plaster Provide under dwelling roof line Increases area by 19.05m2. Increases width by 3000mm. ns OPTION IP2 IP2 Create room plaster lined walls beneath staircase panel hinged door and additional Create room plaster light point to IP2 suit. Create Move up 75,000 room plaster 3000 x 6350 Living Increases Call 13 length EP1 BURBANK by 3000mm. Visit burbank.com.au 3000 x 6350 including *Copyright additional conditions. structural All photos and illustrations are representative only. Floor 3000 plans and x 6350 specifications may be varied by Burbank out notice, the dimensions are diagrammatic only and a Building concrete Contract floor and 2no. final drawings brick piers will to display correct dimensions and detail. All designs are Living the property of Burbank and must not be used, reproduced, copied or varied, wholly or in part out written permission rear Living from an room. authorised Burbank representative. Copyright Burbank Australia (NSW) Pty Ltd. ABN NSW BL C. ACT BL

4 OPTION G1 Provide extension to Garage to create additional area. Increases area by 4.58m2. Increases width G1by 850mm. Provide extension to Garage to create additional area. Increases area by 4.58m². Increases width by 850mm. OPTION G2 Provide extension to Garage to create Workshop area G2 including additional window Provide to extension suit. Rear to Garage garage to gable, create fascia Workshop area including additional & barge to be replaced fascia & window to suit. Rear garage gable, fascia gutter & barge to pitched be replaced roof re-design fascia & to suit so as gutter not to interfere pitched roof G2 re-design ensuite to suit window so as not to interfere ensuite window and enable pitched roof construction. and enable Provide pitched extension roof construction. to Garage to create Increases Workshop area width by by area 13.51m². 2400mm. including additional Increases window width area to by suit m². 2400mm. Rear garage gable, fascia G3 OPTION G3 G1 Provide extension to Garage to create additional area. Increases area by 4.58m². Increases width by 850mm. & barge to be replaced fascia & gutter pitched roof re-design to suit so as not to interfere ensuite window and enable pitched roof construction. Increases width by 2400mm. Increases area by 13.51m². Provide triple car Garage including additional roller door to front. Rear Provide triple car Garage including garage gable, fascia & barge to be additional replaced roller fascia door & to gutter front. Rear garage pitched gable, roof re-design fascia & to barge suit roof to be replaced over rear garage fascia door G3 & alcove gutter so as not to Provide interfere triple ensuite car Garage window including pitched & rumpus roof additional window re-design roller and door enable to suit to front. roof Rear over pitched rear garage roof construction. gable, door fascia alcove Increases & barge so to asbe not to area interfere by replaced 23.61m². Increases fascia & ensuite width gutter window by 3600mm. pitched roof re-design to suit roof & rumpus over window rear garage and door enable alcove so as pitched roof not to construction. interfere ensuite window & rumpus window and enable Increases area by 23.61m². Increases width by 3600mm. pitched roof construction. Increases area by 23.61m². Increases width by 3600mm. IP3 concrete floor and Workshop brick veneer walls to side of x 1810mm 5150 aluminium x 2400window to Family in and 2no. 2057mm x 850mm aluminium windows to Family. Workshop Increases width by 3120mm. Increases area 5150 by 20.93m². x 2400 Increases lot width to 12.5m in lieu of 10m. Garage 6000 x 3510 Garage 6000 x 3510 IP4 window. Increase vanity to 1282mm in lieu of lieu of standard 900mm x 900mm tiled shower base and delete 820mm flush panel hinged door to uite. Relocate and provide 4no. 720mm flush panel hinged doors, delete openings to /uite. OPTION IP3 concrete floor and brick veneer walls to side of Passage/Entrance. Relocate IP3 1no. 2057mm x 1810mm aluminium window to Family in and 2no. 2057mm x 850mm aluminium IP3 windows to Family. Increases area by 31.93m2. Increases width windows by 3120mm. to Family. Increases lot width Increases to 12.5m width in by lieu 3120mm. of 10m. concrete floor and brick veneer walls to side of x 1810mm aluminium window to Family in 2057mm Provide x 1810mm Family aluminium under dwelling window roof line and 2no. including 2057mm additional x 850mm structural aluminium concrete floor and brick veneer walls to side of Increases x 1810mm area by aluminium 20.93m². window to Family in Increases lieu lot of Passage width to 12.5m and provide in lieu 1no. of 10m. additional and 2no. 2057mm x 850mm aluminium windows to Family. Increases width by 3120mm. Increases area by 20.93m². Increases lot width to 12.5m in lieu of 10m. IP4 Bed x3830 Family 6230x3120 window. Increase vanity IP4 to 1282mm in lieu of lieu of Provide standard Master 900mm suite/ x 900mm Retreat tiled option. shower Extend Bed base and 1 by delete 1200mm 820mm to 4890mm flush panel in lieu hinged of 3690mm. door to uite. Relocate Relocate and extend and uite provide by 4no. deleting Rumpus 720mm room flush and panel 1no. hinged 1027mm doors, x 1450mm delete aluminium standard window. 1no. 820mm Increase flush vanity panel to 1282mm hinged door, in lieu of site built standard plaster 982mm, lined stud 1220mm walls to tiled create shower Retreat base in area and lieu provide of standard additional 900mm 2no. x 900mm 1000mmtiled shower openings base to and /uite. delete 820mm flush panel hinged door to uite. Relocate and provide 4no. 720mm Bath flush panel hinged doors, delete openings to /uite. Study 2850x2690 Retreat 2700x2040

5 OPTION IP3 window. Increase vanity to 1282mm in lieu of lieu of standard 900mm x 900mm tiled shower base and delete 820mm flush panel hinged door to uite. Relocate and provide 4no. 720mm flush panel hinged doors, delete openings to /uite. Bath Study 2850x2690 Bed x3830 Retreat 2700x2040