Glass-Reinforced Plastics Composite Poles

Transcription

1 Glass-Reinforced Plastics Composite Poles

2 Why COMPILLAR columns? colour Masts are formed in a selected colored resin, characterized by high and long-term UV resistance. COMPILLAR columns, depending on type, may be finished matt or high gloss. resistance COMPILLAR columns do not corrode. Survive wood, aluminum, steel or concrete under the same conditions. COMPILLAR columns do not change their properties in the salty,acidic and humid environment, they are chemically resistant and environmentally friendly. strength Specific laminate strength is higher than steel. COMPILLAR poles are designed to withstand heavy wind loads. electrical insulation COMPILLAR columns are non-conductive, eliminate risk of electric shock. weight Weight of glass-fibre reinforced composite is a 4-times lower than the weight of steel. Due to the low mass COMPILLAR poles help to minimize costs of transportation and installation. antigraffiti - surface of gelcoat is resistant to chemical solvents (eg. acetone). Cleaning of graffiti paint using above solvent does not affect the layer of gelcoat surface and colour. passive safety - composite poles break as a result of vehicle impact, eliminating danger to passengers.

3 1. ROUND-TAPERED COMPOSITE LIGHT POLES GRP composite poles can be buried in the ground due to their corrosion-resistant properties. This installation method is easy and cost-effective, as no concrete works are required. Light poles are shaped conically in heights of up to 9m in standard length. Compillar s composite light poles can also be assembled by bolts. This tapered round profile features a fully corrosion-resistant composite base. The company s products are low in weight; for instance, an 8m column is 40kg. 1A) ROUND-TAPERED LIGHT POLES BOLTED ASSEMBLY (TYPE SSDPF) Material: GRP Profile: tapered, oval Luminaire assembly diameter: 48//76mm Hatch dimensions: 300x85mm, 350x90 mm Bolts distance: 200x200mm, 250x250mm, 300x300mm Pole H[mm] ST[mm] SP[mm] 3m m m m m m m

4 1B) ROUND-TAPERED LIGHT POLES DIRECT BURIAL (TYPE SSW) Material: GRP Profile: tapered, oval Luminaire assembly diameter: 48//76mm Hatch dimensions: 300x85mm, 350x90 mm Cable inlet dimensions: 150x50mm Pole H[mm] ST[mm] SP[mm] HW[mm] 3m m m m m m m

5 2. DECORATIVE LIGHT POLES Compillar creates decorative poles in composite material, which can be specially designed for specific locations. The company offers architectural styling for historical, modern and contemporary buildings such as progressive urban areas and new shopping centres. Compillar s accessories can be designed on request. Material: GRP Profile: tapered, oval Luminaire assembly diameter: 48//76mm Hatch dimensions: 300x85mm, 350x90 mm Bolts distance: 250x250mm Pole H[mm] ST[mm] 3m 4m 5m 6m 7m

6 3. SQUARE PROFILE COMPOSITE LIGHTING POLES Compillar has developed new composite lighting poles with a squareshaped column for modern spaces. These poles can measure up to 6m in height. Material: GRP Profile: square Hatch dimensions: 350x90 mm Cable inlet dimensions: 50x150mm Pole H[mm] ST=SP[mm] HW[mm] 3m m m m

7 4. GRP POLES FOR TELECOMMUNICATION AND POWER TRANSMISSION LINES APPLICATION GRP composite poles are an ideal replacement for wooden telecommunication poles. When compared to wooden poles, composite columns have a longer service-life ( years), weigh less and are insect-resistant. Compillar s composite poles for power transmission lines currently extend up to 10m in height. They are designed to withstand 500kg of load-resistance on top. Poles are easily installed in challenging and inaccessible environments. 5. COMPOSITE POLES FOR CCTV MONITORING SYSTEM Measuring up to 10m in height, Compillar CCTV composite poles are lightweight, corrosion-resistant and colour-adjusted according to their environment. Material: GRP Profile: tapered, oval Upper diameter: to be adjusted Material: GRP Profile: tapered, oval Pole H[mm] ST[mm] SP[mm] HW[mm] 6m m m m

8 6. LIGHT POLE ACCESSORIES TRASH BIN Compillar offers custom-designed trash bins as a light pole accessory, making them suitable for car parking applications. The trash bin is attachable using a stainless- steel clamp. It features a lock and key and can be coloured to match the tint of the light pole. Material: composite nonflammable Capacity: 56L Weight: 5kg Pole diameter: mm Contents: set includes assembly steel clamp, lock and key FLOWERPOTS Material: GRP composite

9 LUMINAIRE JIBS Material: aluminium Colour: powder coated acc. to RAL palette Weight: 2-10kg Aluminium jibs type WALS 1-4 arm jib L[mm] D[mm] d[mm] WALS1500 WALS1 500 /80 /80 WALS /80 Aluminium jibs type WALG WALS2 /80 1-arm jib L[mm] H[mm] d[mm] D[mm] WALS /80 WALG0/ 0 WALS3 /80 WALS /80 WALS4 /80

10 FOUNDATIONS Prefabricated concrete foundation Foundation A[mm] B[mm] C[mm] D[mm] Pole H[m] F80V M18x45 3-5m F120E M24x 3-7m F100V M24x 3-7m F120V M24x 7-9m ELECTRICAL CONNECTIONS IZK Cable connectors are intended for installation in recess of lighting column. Insulating connector Fuse IZK-4-01 Insulating connector phase IZK-4-02 Insulating connector zero IZK-4-03

11 Passive safety BS EN Compillar performed calculations and simulations for composite pole for compliance with the passive safety standard. The contractor since 1993, has conducted in France about 100 tests for traffic safety devices annually, performs crash tests involving passenger cars, buses and trucks with weights from 900kg to 30kg, which represents a full range of vehicles as defined in the standards EN 1317 and EN The parameters for calculation Type of pole - 9m tapered composite pole, circular section, direct burial assembly. Calculation method - FEM finite element method - Program BarrLier - tests EN1317 and EN12767 Car model - BMW weighing 1500kg ASI 2010 (BW) 0,25 0,2 0,15 0,1 0,05 COM/01/2013 Initial speed of 50 km/h, final speed 42 km/h. 0 The simulation result is NE (does not absorb energy) Time [s] column B COMPILLAR lightpoles received CERTIFICATE OF CONFORMITY No CPR issued by Technical and Test Institute Prague. Compillar lightpoles meet the criteria of the standard EN 40-7: 2002

12 Compillar specialises in fibreglass-reinforced composite pole fabrication for a wide range of industries, including transport, chemical, power, security and telecommunications. Glass-reinforced plastic (GRP) composite poles are an alternative to metal and concrete lighting columns, and have a maintenance-free operating life. The design of GRP laminate is resilient in humid, salty and windy conditions, allowing Compillar to supply lighting poles to chemical environment plants, and high-corrosion and high-voltage areas with no risk of injury. Comparing strength to weight ratio, GRP composite material is stronger and four times lighter in comparison to steel. This enables reduced transport and on-site installation costs. Masts are available in a wide array of coloured surfaces, have high and long-term UV-resistance, and are environmentally sustainable. Irysowa 3/1 street, Gdansk, Poland tel.: , fax: info@compillar.pl