SUBMITTAL. Spec No Item Submitted Comments Pages DUCTILE PIPE US PIPE AND FOUNDRY 2 12" PVC PIPE DIAMOND PLASTICS 2 SAND COLLARS GPK PRODUCTS 2

Size: px

Start display at page:

Download "SUBMITTAL. Spec No Item Submitted Comments Pages DUCTILE PIPE US PIPE AND FOUNDRY 2 12" PVC PIPE DIAMOND PLASTICS 2 SAND COLLARS GPK PRODUCTS 2"

Amie Williams
5 years ago
Views:

B329413 SUBMITTAL Date: To Project Information Company: Northwest Cascade Project: Woodford Ave North Drainage Improvements Contact: Brandon Owner: City Of Kent Phone: (253) 848-2371 Contractor:

1 B SUBMITTAL Date: To Project Information Company: Northwest Cascade Project: Woodford Ave North Drainage Improvements Contact: Brandon Owner: City Of Kent Phone: (253) Contractor: Northwest Cascade Fax: (253) Engineer: Submittal Information Contact Information Submittal Type: New Prepared By: BEN PIMENTEL Revision: Salesman: JEFF WORKMAN Subject: (253) Spec Section: The following items are submitted: Spec No Item Submitted Comments Pages BID ITEM #3000 BID ITEM #4015 BID ITEM #4015 BID ITEM #4025 BID ITEM #4025 BID ITEM #4120 BID ITEM #4141 BID ITEM #4172 BID ITEM #4181 BID ITEM #VII DUCTILE PIPE US PIPE AND FOUNDRY 2 12" PVC PIPE DIAMOND PLASTICS 2 SAND COLLARS GPK PRODUCTS 2 18" PVC PIPE DIAMOND PLASTICS 2 SAND COLLARS GPK PRODUCTS 2 CASTING OLYMPIC FOUNDRY 1 ROMAC END CAP ROMAC INDUSTRIES 1 CATCH BASIN AND RISERS SHOPE CONCRETE 2 CATCH BASIN SHOPE CONCRETE 1 CB SOCKS ACF WEST 1

3 BID ITEM #3000 DUCTILE PIPE 2 PAGES HD Fowler Company Submittal - IP521GTJ TYTON JDlNT PIPE Each of the following is a nationally recognized standards organization; I American National Standards Institute (ANSI) American Water Works Association (A\IANA) American Society for Testing and Materials (ASTM) Underwriters Laboratories (UL) National Fire Protection Association (NFPA) National Sanitation Foundation (NSF) Factory Mutual (FM) ANSIAWWA C151A2l.5, Ductile Iron Pipe, Centrifugally Cast for Water. Ductile Iron TYTON JOINT Pipe is centrifugally cast in metal molds in accordance with ANSIAWWA C151A21.5. The asphaltic outside coating is in accordance with ANSIAWWA C151A TYTON JOINT is U.S. Pipe s trademark for pipe with a push-on type connection. Simplicity, sturdiness and watertightness are built into the system by design. Convincing proof of its worldwide acceptance is shown by the fact that more than 95% of the pipe now sold by U.S. Pipe is TYTON JOINT Pipe. As specified in ANSIAWWA C151A21.51, pipe weights have been calculated using standard barrel weights and weights of bells being produced. TYTON JOINT Pipe is available in sizes 3" through 64". Sizes 3" through 42" are available in nominal 18-foot laying lengths. 4 through 30 sizes, along with sizes 48" through 64", are available in nominal 20-foot laying lengths. ANSIAWWA C104A21.4, Cement-Mortar Lining For Ductile-Iron Pipe and Fittings For Water. TYTON JOINT Pipe in sizes 4 through 36" are UL Listed, and sizes 4" through 16" are FM Approved. When TYTON JOINT Pipe is used for bridge crossings or other above-ground installations, each length of pipe must be supported in a manner to restrict both vertical and horizontal movement. A TYTON Gasket is the only accessory required when installing TYTON JOINT Pipe. It is a circular rubber gasket that has a modified bulb shape in cross section. Gaskets are furnished in accordance with ANSIAWWA C111A21.1. Composition and dimensions of the gasket have been carefully engineered to ensure a watertight and lasting seal. The standard TYTON Gasket is manufactured of SBR styrene butadiene rubber. Gaskets of special elastomers may be ordered for special applications. The gasket contour and bell socket contour ensure that the gasket will remain seated during proper assembly of the pipe. When joint restraint is required for push-on joint pipe, two options are available from U.S. Pipe. For joint restraint of 4" through 24", FIELD LOK 350 Gaskets may be used. FIELD LOK 350 Gaskets are rated for 350 psi in sizes 4" through 24". In addition, for 4" through 36" sizes, TR FLEX Pipe and Fittings may be used, and for 30" through 64" sizes, HP LOK Pipe and Fittings may be used. TR FLEX Pipe and Fittings are rated for working pressures for 350 psi in 4" through 24" sizes, 250 psi in sizes 30 through 36". For HP LOK Pipe and Fittings, the working pressure is 350 psi for 30" through 64". For higher pressure applications contact your U.S. Pipe representative. Complete details on FIELD LOK 350 Gaskets, TR FLEX Pipe and Fittings, and HP LOK Pipe and Fittings can be found on our website, The cement-mortar lining and inside coating are in accordance with ANSIAWWA C104 A21I. Special linings andor coatings can be furnished for specific conditions. ANSIAWWA C111A2l.ll, Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings. TYTON Gaskets are furnished in accordance with ANSIAWWA C111A ANSIAWWA C105A21.5, Polyethylene Encasement for Ductile Iron Pipe Systems. If specifiers and users believe that corrosive soils will be encountered where our products are to be installed, please refer to ANSIAWWA C105A21.5, for proper external protection procedures. NOTE; U. S. Pipe qualifies for Federal Procurement under Public Law No , Section 6002, known as the Resource Recovery Act of 1976, since, due to modern technology, recycled iron and steel scrap are used to a large degree in our Ductile Iron Pipe production. ASTM A746-D3 "Standard specification for Ductile Iron Gravity Sewer Pipe." The plain end of the pipe is furnished beveled or with a quarter ellipse on the edge to allow assembly. More than 40 years of successful experience have proved its sealing capabilities. Hydrostatic tests have shown that the system will withstand pressures far in excess of rated pressures. ASTM A716-D8 "Standard Specification for Ductile Iron Culvert Pipe." TYTON, TYTON l0lnt, TR FLFX, HP LOK and FIELD LOK 350 are Registered Trademarks of U.S. Pipe and Foundry Company LLC. ASTM A536 "Standard Specification for Ductile Iron Castings." REVISED 41816

4 HD Fowler Company Submittal - IP521GTJ PRESSURE CLASS THICKNESSES, DIMENSIONS AND WEIGHT 18-FOOT LAYING LENGTH 20-FOOT LAYING LENGTH SIZE THICKNESS CLASS THICKNESS. >CD (:1(:1 (:1 00Q0 \l-i> CDO0O O -DO -io'jo'jo'j 3 3 XXXXX LTILTILTILTILTILTI 00 \D O3U"l -I> \ OUTSIDE DIAMETER* BARREL WEIGHT PER FOOT Pounds WEIGHT PER LENGTHt Pounds WEIGHT PER LENGTHT Pounds NOTE: Thicknesses and dimensions of 3" through 64 " ductile iron pipe conform to ANSIWIllA C Weights may vary from the standard because of differences in bei weights. *Toerance of 0.D. of spigot end; 3-12 in., in., in., in., in.; in., in., in., in., in., in. T Including bei; calculated weight of pipe rounded off to nearest 5 lbs. Table continued on next page. H Powered by TCPDF ( Powered by TCPDF ( e.15

6 HD Fowler Company Submittal Sec. 5: Ln 4 Vendor: SANI-21 PVC SEWER PIPE SPECIFICATION DATA D3034 & F679 SEWER SPECIFICATION DATA RIEBER JOINT ILLUSTRATION Diamond gravity sewer pipe 4 inches through 60 inches shall be made of compounds conforming to material requirements of ASTM D3034 and ASTM F679 in accordance with ASTM D1784. Diamond PVC Sewer Pipe meets all the dimensional, chemical, and physical requirements as outlined in ASTM D3034 and ASTM F679. A listing to CSA B182.2 is available for most of these sizes. A complete listing by manufacturing plant is available upon request. A D B C t The pipe sizes 4 inches through 60 inches are made with an integral bell watertight joint that meets the requirements of ASTM D3212 and that utilizes a Rieber gasket system for sealing that meets the requirements of ASTM F477. Each male end shall be beveled to facilitate joining and referencing marked for proper insertion depth. Diamond furnished lubricant is to be used in the joining process. SANI-21 PHYSICAL PROPERTIES OF ASTM D3034 & F679 Property ASTM TEST Minimum PIPE MATERIALS: PIPE SHALL BE MADE OF PVC PLASTIC HAVING A MINIMUM CELL CLASSIFICATION OF OR AS DEFINED IN SPECIFICATION D1784. Specific Gravity D Tensile Strength, psi D638 7,0006,000 Tensile Modulus, psi D ,000500,000 IZOD Impact Strength, D256.65ft., lb.in. SHORT FORM Specification for Diamond PVC Solid-Wall Sewer Pipe SDR 26 or SDR 35 or PS 46 or PS 115 All PVC Solid-Wall Sewer PIpe shall be made of compounds conforming to ASTM D1784 manufactured in accordance with the material requirements of ASTM D3034 or ASTM F679. All PVC Sewer Pipe must meet dimensional, chemical, and physical requirements as outlined in ASTM D3034 orastm F679. Joints shall meet the requirements of ASTM D3212 and shall be formed using Rieber Technology. PVC Sewer Pipe shall be installed according to the requirements of ASTM D2321, Uni-Bell s Uni-Pub 6 and the manufacturer s recommendations. 15 dpcpipe.com PVC-PIPE

7 Powered by TCPDF ( Powered by TCPDF ( HD Fowler Company Submittal Sec. 5: Ln 4 Vendor: SANI-21 D3034 & F679 SEWER SPECIFICATION DATA Nominal Pipe Size in. (mm) A Outside Diameter B Bell Socket Diameter C Socket Depth D-3034 PIPE DIMENSIONS D Insert Mark * t Min. Wall Thickness SDR26PS115 4 (100) (150) (200) (250) (300) (375) F-679 PIPE DIMENSIONS 18 (450) (525) (600) (675) ciod (750) ciod (900) ciod (1050) ciod (1200) ciod (1350) ciod (1500) t Min. Wall Thickness SDR35PS46 SANI-21 LOADING ASTM D3034 & F679 LOADING CHART (SDR35 PS46) Nominal Pipe Size in. (mm) Outside Diameter Bundle Quantity SDR35PS46 *Feet Per Truckload (100) ,184 24,288 6 (150) ,080 11,264 8 (200) (250) (300) (375) (450) (525) (600) (675) (750) (900) (1050) (1200) (1350) (1500) Prices are subject to a firm policy of Price in effect at time of shipment on regular purchases Possession of this page does not constitute an offer of sale *Tolerance of allowed dpcpipe.com PVC-PIPE 16

8 HD Fowler Company Submittal Sec. 5: Ln 6 Vendor: BID ITEM #4015 SAND COLLARS 2 PAGES

9 HD Fowler Company Submittal Sec. 5: Ln 6 Vendor: Powered by TCPDF ( Powered by TCPDF (

11 HD Fowler Company Submittal - PP3034L SANI-21 PVC SEWER PIPE SPECIFICATION DATA D3034 & F679 SEWER SPECIFICATION DATA RIEBER JOINT ILLUSTRATION Diamond gravity sewer pipe 4 inches through 60 inches shall be made of compounds conforming to material requirements of ASTM D3034 and ASTM F679 in accordance with ASTM D1784. Diamond PVC Sewer Pipe meets all the dimensional, chemical, and physical requirements as outlined in ASTM D3034 and ASTM F679. A listing to CSA B182.2 is available for most of these sizes. A complete listing by manufacturing plant is available upon request. A D B C t The pipe sizes 4 inches through 60 inches are made with an integral bell watertight joint that meets the requirements of ASTM D3212 and that utilizes a Rieber gasket system for sealing that meets the requirements of ASTM F477. Each male end shall be beveled to facilitate joining and referencing marked for proper insertion depth. Diamond furnished lubricant is to be used in the joining process. SANI-21 PHYSICAL PROPERTIES OF ASTM D3034 & F679 Property ASTM TEST Minimum PIPE MATERIALS: PIPE SHALL BE MADE OF PVC PLASTIC HAVING A MINIMUM CELL CLASSIFICATION OF OR AS DEFINED IN SPECIFICATION D1784. Specific Gravity D Tensile Strength, psi D638 7,0006,000 Tensile Modulus, psi D ,000500,000 IZOD Impact Strength, D256.65ft., lb.in. SHORT FORM Specification for Diamond PVC Solid-Wall Sewer Pipe SDR 26 or SDR 35 or PS 46 or PS 115 All PVC Solid-Wall Sewer PIpe shall be made of compounds conforming to ASTM D1784 manufactured in accordance with the material requirements of ASTM D3034 or ASTM F679. All PVC Sewer Pipe must meet dimensional, chemical, and physical requirements as outlined in ASTM D3034 orastm F679. Joints shall meet the requirements of ASTM D3212 and shall be formed using Rieber Technology. PVC Sewer Pipe shall be installed according to the requirements of ASTM D2321, Uni-Bell s Uni-Pub 6 and the manufacturer s recommendations. 15 dpcpipe.com PVC-PIPE

12 Powered by TCPDF ( Powered by TCPDF ( HD Fowler Company Submittal - PP3034L SANI-21 D3034 & F679 SEWER SPECIFICATION DATA Nominal Pipe Size in. (mm) A Outside Diameter B Bell Socket Diameter C Socket Depth D-3034 PIPE DIMENSIONS D Insert Mark * t Min. Wall Thickness SDR26PS115 4 (100) (150) (200) (250) (300) (375) F-679 PIPE DIMENSIONS 18 (450) (525) (600) (675) ciod (750) ciod (900) ciod (1050) ciod (1200) ciod (1350) ciod (1500) SANI-21 LOADING ASTM D3034 & F679 LOADING CHART (SDR35 PS46) Nominal Pipe Size in. (mm) Outside Diameter Bundle Quantity SDR35PS46 *Feet Per Truckload (100) ,184 24,288 6 (150) ,080 11,264 8 (200) (250) (300) (375) (450) (525) (600) (675) (750) (900) (1050) (1200) (1350) (1500) Prices are subject to a firm policy of Price in effect at time of shipment on regular purchases Possession of this page does not constitute an offer of sale *Tolerance of allowed t Min. Wall Thickness SDR35PS46 dpcpipe.com PVC-PIPE 16

13 HD Fowler Company Submittal Sec. 5: Ln 6 Vendor: BID ITEM #4025 SAND COLLARS 2 PAGES

14 HD Fowler Company Submittal Sec. 5: Ln 6 Vendor: Powered by TCPDF ( Powered by TCPDF (

16 Powered by TCPDF ( Powered by TCPDF ( HD Fowler Company Submittal Sec. 15: Ln 10 Vendor: 79700

EC501 END CAP COUPLING SUBMITTAL INFORMATION STANDARD Romac RC501 couplings meet the specifications set forth in the AWWA Standard C219 coupling spec.

GASKETS Gaskets are made from virgin Styrene Butadiene Rubber (SBR) compounded for water and sewer service in accordance with ASTM D 2000 MBA 710.

18 EC501 END CAP COUPLING SUBMITTAL INFORMATION STANDARD Romac RC501 couplings meet the specifications set forth in the AWWA Standard C219 coupling spec. MATERIALS CASTINGS The end rings and center rings are cast from ductile (nodular) iron, meeting or exceeding ASTM A 536. END CAP End caps are furnished with 2" IPT female threads with plug. GASKETS Gaskets are made from virgin Styrene Butadiene Rubber (SBR) compounded for water and sewer service in accordance with ASTM D 2000 MBA 710. Other compounds available for petroleum, chemical, or high temperature service. BOLTS AND NUTS 58 inch, High strength low alloy steel trackhead bolts. National coarse rolled thread and heavy hex nuts. Steel meets AWWA C111 composition specifications. Stainless steel bolts and nuts available on request. COATINGS Shop coat applied to cast parts for corrosion protection in transit. Fusion bonded epoxy, liquid epoxy and other coatings available on request. PRESSURE When properly installed on a pipe that is within the correct outside diameter range, couplings in the Romac Style 501 line can be used at working pressures up to 260 psi. Higher working pressures available for specific applications. Document # SIZES & RANGES See catalog. This information is based on the best data available at the date printed above. Please check with Romac for any updates or changes th Avenue SE Suite 100 Bothell, WA Phone (425) Fax (425)

23 Powered by TCPDF ( Powered by TCPDF ( HD Fowler Company Submittal - HICB Catch Basin Type 1 catch basin products Reinforcing ASTM I WSDOT requirements All components #3 grade 60 reinforcing 6 Inch Riser 300lbs.." 20" 22".." 12 Inch Riser 600 lb. 0" Precast Base Base unit has four-way knock outs provided for pipe entry 2150lbs Confonnity Standerds Washington State APWA I WSDOT Standard Specifications WSDOTB-1,,.. " 20",c; 0,,, y, I '" 22".." 12"." 20" r 20".." 20" 0,,,, ",,, Y I I, I '. 0 22" 0,, ~, "'" 'r.. " I I I Note: drawings not to scal. Shope Enterprises, Inc East MaIn Avenue Puyallup, WA (2S3) Fax Una 1 (253) 845-Q292 Fax Une2 (253) [Toll Free - WA only] har... tu.com

downstream supplies. The STORM SENTINEL traps these pollutants, reducing and controlling the entrance of contaminants into our water systems.

The entire unit is under the grate, no excess fabric extends above the grate, creating a safer environment for pedestrians. No trimming required.

The first step to comply with the stringent EPA standards. U.S.

diameter. The single fabric sheet is 4 x5. The depth varies, depending on the size of the drain and how deep the fabric hangs down.

A new unit can handle approximately 300 gallons of water per minute. Proper maintenance is mandatory to maintain maximum water flow.

25 Powered by TCPDF ( Powered by TCPDF ( HD Fowler Company Submittal - HIDIRTRAPS STORM SENTINEL Adjustable Catch Basin Insert Storm water runoff carries with it dirt and hydrocarbons that pollute our downstream supplies. The STORM SENTINEL traps these pollutants, reducing and controlling the entrance of contaminants into our water systems. The STORM SENTINEL is a simple sheet of geotextile fabric supported by a wire frame. Rectangular or round models adjust to fit a variety of drain sizes. The entire unit is under the grate, no excess fabric extends above the grate, creating a safer environment for pedestrians. No trimming required. The STORM SENTINEL is an inexpensive, easy to use Best Management Practice (BMP), a vital part of any Storm Water Pollution Prevention Plan. The first step to comply with the stringent EPA standards. U.S. Patent No 7,201,843 Size: Material: Flow Rate: Removes: Disposal: Weight: Specifications: Adjusts to Rectangular Drains; smallest 16 X20 ; largest 28 X36 Round adjust from 27 to 29 diameter. The single fabric sheet is 4 x5. The depth varies, depending on the size of the drain and how deep the fabric hangs down. 8 oz Polypropylene, Non-Woven Geotextile Fabric Maximum overflow rate varies depending on the level of soil that has accumulated with the fabric. A new unit can handle approximately 300 gallons of water per minute. Proper maintenance is mandatory to maintain maximum water flow. The STORM SENTINEL has four overflow outlets, one on each side, to allow excessive water during heavy rain showers to bypass the system, reducing the chance of flooding or ponding. The catch basin insert will handle normal to peak flow rates, but could possibly back up during flood events. Oil, Grease, Sediment, Litter, Debris Disposal is dependent on the nature of pollutants being collected. Disposal should be in accordance with local, state and federal regulations. Empty = STORM SENTINEL units are approx. 2 lbs. Full = Weight of empty unit plus weight of sediment and water trapped in unit. Dry sediment could weigh pounds. Fully loaded, wet units can weigh approximately pounds.