PINNACLE 600/650 HIGH PERFORMANCE CURTAIN WALL apexfacades.com. apexfacades.com 1.2 Pinnacle Pg- 1. Printed on 12/12/17

Transcription

1 apexfacades.com PINNACLE 600/650 apexfacades.com 1.2 Pinnacle Pg- 1 HIGH PERFORMANCE CURTAIN WALL

2 THIS PAGE INTENTIONALY LEFT BLANK apexfacades.com 1.2 Pinnacle Pg- 2

3 Series Curtain Wall is a thermally broken contemporary stick built curtain wall system that is suitable for low to high rise applications that require a high performance glazing system. The versatile installation methods of Pinnacle ensure compatibility with a wide variety of project applications. Pinnacle 650 series Curtain wall system features a split-mullion design for simplified field installation, without compromising performance. This captured, two side and four sided SSG system is available in array of back section dimensions to meet your project specific requirements. Finish options include anodized, powder, paint and split finishes. FEATURES Great value with simplified fabrication and installations methods that lead to cost savings Industry leading thermal and structural performance Structural Silicone Glazed (SSG) or Capped Options Industry standard and custom caps available Versatile Accommodates captured, two sided SSG or four-sided SSG Corner and Splayed Applications Shear block and screw spline design FINISHES Available in 7 standard anodized finishes Painted finishes in standard and custom colors Split finish option Multipurpose sleeve double as reinforcement Multiple mullion depths for various applications and spans Accommodates a variety of glass infills including Single, Double and Triple Glass chairs offer superior glazing support and allow for larger glazing units TECHNICAL SERVICES Wind Load Charts Thermal performance charts Design assistance and support OPTIONAL FEATURES Steel reinforcement Integrated entrance framing systems Compatible with Apex Vents and Doors apexfacades.com 1.2 Pinnacle Pg- 3

4 ARCHITECTURAL DETAILS apexfacades.com 1.2 Pinnacle Pg- 4

5 Reinforcing Options 3"x1" STL. BAR 34, 9 [1 3/8"] ,3 [2 31/32"] 63 [2 15/32"] 25,4 [1"] TYP. 127 [5"] 152,4 [6"] 101,6 [4"] 6"x1" STL. BAR 63,5 [2 1/2"] "x1" STL. BAR 63,5 [2 1/2"] 87,6 [3 7/16"] 5"x1" STL. BAR 63,5 [2 1/2"] ,8 [1 3/4"] 100,1 [3 15/16"] 63,5 [2 1/2"] 177,8 [7"] 63,5 2 1/2" 63,5 2 1/2" apexfacades.com 1.2 Pinnacle Pg- 5

6 Reinforcing Options 3"x1" STL. BAR "x1" STL. BAR 127 [5"] 152,4 [6"] 63,5 [2 1/2"] 63,5 [2 1/2"] 177,8 [7"] 79,3 [3 1/8"] 92,1 [3 5/8"] 53,6 [2 3/32"] 66,4 [2 5/8"] 101,6 [4"] 63,5 [2 1/2"] 4"x1" STL. BAR "x1" STL. BAR ,5 [2 1/2" apexfacades.com 1.2 Pinnacle Pg- 6

7 30 [1 3/16"] 63,5 [2 1/2"] REINFORCING, IF NECESSARY V1 H1 34,9 [1 3/8"] 63,5 [2 1/2"] 25,4 [1"] 152,4 [6"] 101,6 [4"] H A V1 TYPICAL TRANSOM TO MULLION CONNECTION 25,4 [1"] 152,4 [6"] 101,6 [4"] apexfacades.com 1.2 Pinnacle Pg- 7

8 ,5 [2 1/2"] REINFORCING, IF NECESSARY H2 101,6 [4"] 152,4 [6"] 25,4 [1"] H ,5 [2 1/2"] ,6 [4"] 152,4 [6"] H3 25,4 [1"] 12,7 [1/2"] 12,7 [1/2"] H3 apexfacades.com 1.2 Pinnacle Pg- 8

9 [1 3/16"] 63,5 [2 1/2"] V4 H4 12,7 [1/2"] 63,5 [2 1/2"] 101,6 [4"] 25,4 [1"] 152,4 [6"] H H ,4 [5 1/4"] A V4 TYPICAL TRANSOM TO MULLION CONNECTION 25,4 [1"] 152,4 [6"] 101,6 [4"] apexfacades.com 1.2 Pinnacle Pg- 9

10 [1 3/16"] 63,5 [2 1/2"] V5 H5 12,7 [1/2"] 63,5 [2 1/2"] 25,4 [1"] 101,6 [4"] 133,4 [5 1/4"] 15,8 [5/8"] BITE 12,7 [1/2"] H A V5 4-SIDE STRUCTURAL GLAZING ISOMETRIC VIEW 25,4 [1"] 101,6 [4"] 133,4 [5 1/4"] apexfacades.com 1.2 Pinnacle Pg- 10

11 63,5 [2 1/2"] 52,3 [2 1/16"] V6 152,4 [6"] VENT 63,5 [2 1/2"] H6 VENT 63,5 52,3 [2 1/2"] [2 1/16"] 25,4 63,5 29 [1"] [2 1/2"] [1 1/8"] H6 V6 12,7 [1/2"] 152,4 [6"] apexfacades.com 1.2 Pinnacle Pg- 11

12 ,4 [1"] 15,9 [5/8"] ,2 [1/8"] 25,4 [1"] 63,5 [2 1/2"] 98,4 [3 7/8"] 25,4 [1"] 152,4 [6"] 101,6 [4"] H7 MULLION - DOOR ADAPTOR 3,2 [1/8"] 50,8 [2"] 39,2 [1 17/32"] V7 TRANSOM - DOOR ADAPTOR 15,9 [5/8"] DOOR ADAPTOR ISOMETRIC VIEW apexfacades.com 1.2 Pinnacle Pg- 12

13 TYPICAL TRANSOM TO MULLION CONNECTION 6 3,5 [2 1 / 2"] 25,4 [1"] 91,5 [3 19/32"] 153,2 [6 1/32"] 101,6 [4"] 45 6,3 [1/4"] 91,5 [3 19/32"] H9 H9 90 CORNER MULLION 6" O.A. SYSTEM DEPTH apexfacades.com 1.2 Pinnacle Pg- 13

14 25,4 [1"] 177,8 [7"] 127 [5"] ,8 [7"] 127 [5"] 45 25,4 [1"] H10 90 CORNER MULLION 7" O.A. SYSTEM DEPTH apexfacades.com 1.2 Pinnacle Pg- 14

15 18 [23/32"] 158,8 [6 1/4"] 127 [5"] 45 15,9 [5/8"] 25,4 [1"] 25,4 [1"] [5"] 158,8 [6 1/4"] 6 3,5 [2 1 / 2"] R12,7 [R1/ 2" ] H11-90 CORNER MULLION 6 1/4" O.A. SYSTEM DEPTH ,5 [7 / 8 "] 19 [3/4"] 25,9 [1 1/32"] MAX. BITE H12 90 CORNER MULLION 6 1/4" O.A. SYSTEM DEPTH apexfacades.com 1.2 Pinnacle Pg- 15

16 13 5 N O M IN AL ( ) ,4 [1"] 158,8 [6 1/4"] 127 [5"] 2 3,5 [1/ 5 16"] H13 9,5 [3/8"] 135 CORNER MULLION 6 1/4" O.A. SYSTEM DEPTH 15,9 [5/8"] MAX. BITE apexfacades.com 1.2 Pinnacle Pg- 16

17 Pinnacle 650 3"x3/8" STL BAR, IF NECESSARY, E.G ,2 [1 3/16"] 63,5 [2 1/2"] 30,2 [1 3/16"] REINFORCING, IF NECESSARY V8 H14 101,6 [4"] 54,2 [2 1/8"] 34,9 [1 3/8"] 63,5 [2 1/2"] 25,4 [1"] 152,4 [6"] H16 SPLIT-MULLION V8 25,4 [1"] 63,5 [2 1/2"] ISOMETRIC VIEW 25,4 [1"] 153,3 [6 1/32"] 101,6 [4"] apexfacades.com 1.2 Pinnacle Pg- 17

18 Pinnacle V9 H15 V10 V9 63,5 [2 1/2"] 9,5 [3/8"] 38,1 [1 1/2"] GALV. STL BACKPAN WITH MINERAL WOOL INSULATION 6,4 [ 1/4"] ,4 [1/4"] SPANDREL DRAINAGE 8 4 [5/32"] [ 5/16"] V H SPANDREL DRAINAGE 25,4 [1"] 153,3 [6 1/32"] 101,6 [4"] apexfacades.com 1.2 Pinnacle Pg- 18

19 3"x3/8" STL BAR, IF NECESSARY, E.G ,2 [1 3/16"] 63,5 [2 1/2"] 30,2 [1 3/16"] REINFORCING, IF NECESSARY Pinnacle 650 V11 H16 101,6 [4"] 19,1 [3/4"] 12,6 [1/2"] BITE, TYP. 25,4 [1"] 152,4 [6"] SPLIT-MULLION, 2SSG H16 OPTION - VERTICAL CAPS SILICONE & BACKER ROD ISOMETRIC VIEW 25,4 [1"] V11 152,4 [6"] 101,6 [4"] TRANSOM, 2SSG OPTION - VERTICAL CAPS apexfacades.com 1.2 Pinnacle Pg- 19

20 Pinnacle ,5 [2 1/2"] V12 H17 152,4 [6"] 19,1 [3/4"] 12,6 [1/2"] BITE, TYP. H17 SPLIT-MULLION, 2SSG OPTION - HORIZONTAL CAPS ISOMETRIC VIEW 25,4 [1"] V12 101,6 [4"] 133,4 [5 1/4"] TRANSOM, 2SSG OPTION - HORIZONTAL CAPS apexfacades.com 1.2 Pinnacle Pg- 20

21 ,5 [2 1/2"] Pinnacle H18 V13 PA 6.6 THERMAL SPACER WEATHER SEAL GASKET 19,1 [3/4"] 12,6 [1/2"] SPANDREL DRAINAGE H18 SPLIT-MULLION, 4SSG OPTION - HORIZONTAL CAPS [ 5/16"] 19,1 [3/4"] , 4 [ 1/ 4"] ISOMETRIC VIEW 25,4 [1"] V13 101,6 [4"] 133,4 [5 1/4"] TRANSOM, 4SSG OPTION - HORIZONTAL CAPS apexfacades.com 1.2 Pinnacle Pg- 21

22 FABRICATION DETAILS apexfacades.com 1.2 Pinnacle Pg- 22

23 Fabrication Details 88,9 [3 1/2"] 88,9 [3 1/2"] 89, A 30,2 [1 3/16"] 12,2±0,3 [15/32±0"] 12,2±0,3 [15/32±0"] 58 [2 9/32"] 58 [2 9/32"] 22,2 [7/8"] 114,3 [4 1/2"] 30,2 [1 3/16"] R2 [R3/32"] 89,0 30,2 [1 3/16"] 12,7±0,3 [1/2±0"] 58 [2 9/32"] 22,2 [7/8"] 12,2±0,3 [15/32±0"] 30,2 [1 3/16"] 114,3 [4 1/2"] A 58 [2 9/32"] R2 [R3/32"] apexfacades.com 1.2 Pinnacle Pg- 23

24 139,7 [5 1/2"] 89,0 30,2 [1 3/16"] 12,2±0,3 [15/32±0"] 12,2±0,3 [15/32±0"] 30,2 [1 3/16"] 139,7 [5 1/2"] A 58 [2 9/32"] 58 [2 9/32"] 22,2 [7/8"] R2 [R3/32"] 46, A R6 [R1/4"] R2,5 [R3/32"] 30,2 [1 3/16"] 139,1 [5 15/32"] 38,1 [1 1/2"] 38,1 [1 1/2"] [ 0 48,5-0,5 0" 1 29/32-1/ 32"] 23,6 [15/16"] apexfacades.com 1.2 Pinnacle Pg- 24

25 165,1 [6 1/2"] 89,0 30,2 [1 3/16"] 12,2±0,3 [15/32±0"] 58 [2 9/32"] 22,2 [7/8"] 12,2±0,3 [15/32±0"] 30,2 [1 3/16"] 165,1 [6 1/2"] A 58 [2 9/32"] R2 [R3/32"] apexfacades.com 1.2 Pinnacle Pg- 25

26 (4) Ø5 [Ø3/ 16"] ,5 [2 1/2"] 20,6 [13/16"] 22,2 [7/8"] 63,5 [2 1/2"] 22,2 [7/8"] 63,5 [2 1/2"] [ +0,5 12,7-0 1/2 +1/32" -0" ] LENGTH [ +0,5 12,7-0 1/2 +1/32" -0" ] 101,6 [4"] 116,6 [4 19/32"] (4) Ø5 [Ø3/ 16"] 63,5 [2 1/2"] [ +0,5 12,7-0 1/2 +1/32" -0" ] 20,6 [13/16"] LENGTH [ +0,5 12,7-0 1/2 +1/32" -0" ] 101,6 [4"] apexfacades.com 1.2 Pinnacle Pg- 26

27 15 [19/32"] 31,8 [1 1/4"] 45 (4) Ø 5 [Ø 3/ 1 6"] LENGTH LENGTH +0,5 12,7-0 [ 1/2 +1/32" -0" ] 20,6 [13/16"] 22,2 [7/8"] 116,6 [4 19/32"] 63,5 [2 1/2"] 101,6 [4"] 116,6 [4 19/32"] apexfacades.com 1.2 Pinnacle Pg- 27

28 Series Curtain Wall Thermal Chart NFRC THERMAL SIMULATION CHART PINNACLE 600 CURTAIN WALL SIMULATION METHOD: ANSI/NFRC 100, Procedure for Determining Fenestration Product U-Factors (2014) ANSI/NFRC 200, Procedure for Determining Fenestration Product Solar Heat Gain Coefficients at Normal Incidence (2014) NFRC 500, Procedure for Determining Fenestration Product Condensation Resistance Values (2014) Technical Interpretation Manual (2010) SIMULATION SIZE: 2000mm x 2000mm (79in in x 79in) apexfacades.com 1.2 Pinnacle Pg- 28

29 Windload & Deadload Charts WINDLOAD CHARTS PINNACLE CHARTS WINDLOAD CHARTS PINNACLE CHARTS 1) Single Span Chart 1) Single Span Chart 2) Single Span + Sleeve Chart 3) Single Span + Sleeve + Steel Reinforcing Chart 2) Single Span + Sleeve Chart 3) Single Span + Sleeve + Steel Reinforcing Chart 4) Single Span + Steel Reinforcing Chart 5) Double Span 4) Single Span + Steel Reinforcing Chart 5) Double Span 6) Double Span + Sleeve Chart 7) Double Span + Sleeve & Steel Reinforcing Chart 6) Double Span + Sleeve Chart 7) Double Span + Sleeve & Steel Reinforcing Chart WINDLOAD & DEADLOAD CHARTS TABLE OF CONTENTS 8) Double Span + Steel Reinforcing Chart WINDLOAD CHARTS PINNACLE CHARTS 8) Double Span + Steel Reinforcing Chart WINDLOAD CHARTS PINNACLE CHARTS 1) Single Span Chart 1) Single Span Chart 2) Single Span + Sleeve Chart 3) Single Span + Sleeve + Steel Reinforcing Chart 2) Single Span + Sleeve Chart 3) Single Span + Sleeve + Steel Reinforcing Chart 4) Single Span + Steel Reinforcing Chart 5) Double Span 4) Single Span + Steel Reinforcing Chart 5) Double Span 6) Double Span + Sleeve Chart 7) Double Span + Sleeve & Steel Reinforcing Chart 6) Double Span + Sleeve Chart 7) Double Span + Sleeve & Steel Reinforcing Chart 8) Double Span + Steel Reinforcing Chart 8) Double Span + Steel Reinforcing Chart apexfacades.com 1.2 Pinnacle Pg- 29

30 Windload & Deadload Charts WINDLOAD CHARTS PINNACLE CHARTS WINDLOAD CHARTS PINNACLE CHARTS 1) Single Span Chart 1) Single Span Chart 2) Single Span + Sleeve Chart 3) Single Span + Sleeve + Steel Reinforcing Chart 2) Single Span + Sleeve Chart 3) Single Span + Sleeve + Steel Reinforcing Chart 4) Single Span + Steel Reinforcing Chart 5) Double Span 4) Single Span + Steel Reinforcing Chart 5) Double Span 6) Double Span + Sleeve Chart 7) Double Span + Sleeve & Steel Reinforcing Chart 6) Double Span + Sleeve Chart 7) Double Span + Sleeve & Steel Reinforcing Chart 8) Double Span + Steel Reinforcing Chart 8) Double Span + Steel Reinforcing Chart WINDLOAD CHARTS PINNACLE CHARTS WINDLOAD CHARTS PINNACLE CHARTS PINNACLE DEADLOAD CHARTS 1) Single Span Chart 1) Single Span Chart 1) Dead Load Chart 2) Single Span + Sleeve Chart 3) Single Span + Sleeve + Steel Reinforcing Chart 4) Single Span + Steel Reinforcing Chart 5) Double Span 2) Single Span + Sleeve Chart 3) Single Span + Sleeve + Steel Reinforcing Chart 4) Single Span + Steel Reinforcing Chart 5) Double Span 2) Dead Load Chart 3) Dead Load Chart 4) Dead Load Chart 5) Dead Load Span 6) Dead Load Chart 7) Dead Load Chart 6) Double Span + Sleeve Chart 7) Double Span + Sleeve & Steel Reinforcing Chart 6) Double Span + Sleeve Chart 7) Double Span + Sleeve & Steel Reinforcing Chart 8) Dead Load Chart 9) Dead Load Chart 8) Double Span + Steel Reinforcing Chart 8) Double Span + Steel Reinforcing Chart apexfacades.com 1.2 Pinnacle Pg- 30

31 Windload Charts GENERAL NOTES WINDLOAD Pages CHARTS 1. Assume horizontal members (if any) provide lateral support for seismic loads. 2. Steel reinforcing inertia value expressed in aluminum for total inertia value ( i.e. steel value is factored by ratio of steel/aluminum modules values). 4. Mullion freely supported at ends. 5. Value of mullion includes back section and nosing 6. All reinforcing shown in these charts considered that it is mechanically fastened to the aluminum extrusion. Fastening requirements to be reviewed and approved by Engineer. DEADLOAD Pages CHARTS 1. Deflection requirements comply with S157-05/S and AAMA TIR-A Deflection Limit - 1/8". 2. Transom freely supported at ends with setting blocks at 1/4 or 1/8 of transom length or 6". 3. Glass unit - 6mm / 6 mm. 3. Deflection requirements comply with S157-05/S and AAMA TIR-A Deflection Limit - L/175. (Note: to convert to L/ /4" deflection limit when H> 13.5 ft., multiply mullion spacing by k = /H, where H - mullion height in ft.) *Charts are based on deflection analysis only and considered for estimation purposes only. Designer has to take necessary steps to make appropriate engineering calculations as per applicable Building Codes and regulations for complete design, i.e. stress, slenderness, local buckling SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 31

32 Windload Charts SINGLE SPAN +SLEEVE WINDLOAD CHART SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 32

33 Windload Charts SINGLE SPAN +SLEEVE REINFORCING WINDLOAD CHART DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 33

34 Windload Charts DOUBLE SPAN +SLEEVE WINDLOAD CHART DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 34

35 Windload Charts DOUBLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 35

36 Windload Charts SINGLE SPAN +SLEEVE WINDLOAD CHART SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 36

37 Windload Charts SINGLE SPAN WITH STEEL REINFORCING WINDLOAD CHART DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 37

38 Windload Charts DOUBLE SPAN +SLEEVE WINDLOAD CHART DOUBLE SPAN + SLEEVE + STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 38

39 Windload Charts DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 39

40 Windload Charts SINGLE SPAN +SLEEVE WINDLOAD CHART SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 40

41 Windload Charts SINGLE SPAN WITH STEEL REINFORCING WINDLOAD CHART DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 41

42 Windload Charts DOUBLE SPAN + SLEEVE WINDLOAD CHART DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 42

43 Windload Charts DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 43

44 Windload Charts SINGLE SPAN +SLEEVE WINDLOAD CHART SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 44

45 Windload Charts SINGLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 45

46 Windload Charts DOUBLE SPAN +SLEEVE WINDLOAD CHART DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 46

47 Windload Charts DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 47

48 Windload Charts SINGLE SPAN +SLEEVE WINDLOAD CHART SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 48

49 Windload Charts DOUBLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 49

50 Windload Charts DOUBLE SPAN +SLEEVE WINDLOAD CHART SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 50

51 Windload Charts DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 51

52 Windload Charts SINGLE SPAN +SLEEVE WINDLOAD CHART SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 52

53 Windload Charts SINGLE SPAN WITH STEEL REINFORCING WINDLOAD CHART DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 53

54 Windload Charts DOUBLE SPAN +SLEEVE WINDLOAD CHART DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 54

55 Windload Charts DOUBLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 55

56 Windload Charts SINGLE SPAN +SLEEVE WINDLOAD CHART SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 56

57 Windload Charts SINGLE SPAN WITH STEEL REINFORCING WINDLOAD CHART DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 57

58 Windload Charts DOUBLE SPAN +SLEEVE WINDLOAD CHART DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 58

59 Windload Charts DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 59

60 Windload Charts SINGLE SPAN +SLEEVE WINDLOAD CHART SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 60

61 Windload Charts SINGLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 61

62 Windload Charts DOUBLE SPAN +SLEEVE WINDLOAD CHART DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 62

63 Windload Charts DOUBLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART DOUBLE SPAN DEADLOAD CHART DEADLOAD CHARTS PINNACLE 600 apexfacades.com 1.2 Pinnacle Pg- 63

64 Deadload Charts DEADLOAD CHART DEADLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 64

65 Deadload Charts DEADLOAD CHART DEADLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 65

66 Deadload Charts DEADLOAD CHART DEADLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 66

67 Deadload Charts DEADLOAD CHART DEADLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 67

68 apexfacades.com 1.2 Pinnacle Pg- 68

69 PARTS LIST apexfacades.com 1.2 Pinnacle Pg- 69

70 Parts List PART # CROSS SECTION DESCRIPTION NOTES " x 4" (63mm X 102mm) Mullion (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 1,831,300) Iyy in4: (mm4: 649,737) " x 5" (63mm X 127mm) Mullion (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 3,080,162) Iyy in4: (mm4: 767,945) " x 6" (63mm X 152mm) Mullion (8" [203mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 4,732,260) Iyy in4: (mm4: 886,153) apexfacades.com 1.2 Pinnacle Pg- 70

71 Parts List PART # CROSS SECTION DESCRIPTION NOTES " x 7" (63mm X 178mm) Mullion (9" [229mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 6,828,650) Iyy in4: (mm4: 1,004,361) " x 7" (63mm X 178mm) Mullion SSG (8.25" [209mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 5,893,427) Iyy in4: (mm4: 1,004,203) apexfacades.com 1.2 Pinnacle Pg- 71

72 Parts List PART # CROSS SECTION DESCRIPTION NOTES " x 4" (63mm X 102mm) Mullion SSG (5.25" [133mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 1,504,009) Iyy in4: (mm4: 649,579) " x 5" (63mm X 127mm) Mullion SSG (6.25" [159mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 2,585,628) Iyy in4: (mm4: 767,787) " x 6" (63mm X 152mm) Mullion SSG (7.25" [184mm] O.A. System Depth Standard Length 289" (7341mm) Ixx in4: (mm4: 4,035,107) Iyy in4: (mm4: 885,995) apexfacades.com 1.2 Pinnacle Pg- 72

73 Parts List PART # CROSS SECTION DESCRIPTION NOTES Corner Mullion 2.5"x7" (63mm X mm) (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 5,466,786) Iyy in4: (mm4: 911,873) Corner Mullion 2.5" x 8.5" (63mm X mm) (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 8,994,954) Iyy in4: (mm4: 1,079,046) apexfacades.com 1.2 Pinnacle Pg- 73

74 Parts List PART # CROSS SECTION DESCRIPTION NOTES Outside Corner Mullion 2.5" x 8" (63mm X 203mm) SSG (6.25" [159mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 6,984,677) Iyy in4: (mm4: 1,038,738) Inside Corner Mullion 2.5" x 8" (63mm X 203mm) SSG 90 (6.25" [159mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 5,894,930) Iyy in4: (mm4: 994,907) apexfacades.com 1.2 Pinnacle Pg- 74

75 Parts List PART # CROSS SECTION DESCRIPTION NOTES Mullion 2.5" x 7" (63mm X 178mm) 135 SSG (6.25" [159mm] O.A. System Depth) Standard Length 289" (7341mm) Range of 125 degree to 145 degree can be achieved Ixx in4: (mm4: 3,295,408) Iyy in4: (mm4: 809,622) " x 2.5" (63mm X 63mm) Mullion (4.5" [114mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 624,148) Iyy in4: (mm4: 472,425) " x 1" (63mm X 25mm) Mullion (Veneer) (3" [76mm] O.A. System Depth) Ixx in4: (mm4: 189,530) Iyy in4: (mm4: 70,925) Standard Length 289" (7341mm) " x 1" (63mm X 25mm) Open Back Mullion (Veneer) (3" [76mm] O.A. System Depth) Ixx in4: (mm4: 199,624) Iyy in 4: (mm4: 47,024) Standard Length 289" (7341mm) apexfacades.com 1.2 Pinnacle Pg- 75

76 Parts List Pinnacle 650 PART # CROSS SECTION DESCRIPTION NOTES " x 4" (63mm X 102mm) Split-Mullion, Male. (6" [152mm] O.A. System Depth for Captured Glazing) (5.25" [133mm] O.A. System Depth for SSG) Standard Length 289" (7341mm) Ixx in4: (mm4: 663,347) Iyy in4: (mm4: 40,853) " x 4" (63mm X 102mm) Split-Mullion, Female for Captured Glazing (6" [152mm] O.A. System Depth) Standard Length 189" (7341mm) Ixx in4: (mm4: 1,097,480) Iyy in4: (mm4: 108,541) " x 4" (63mm X102mm) Split-Mullion, Female for SSG (5.25" [133mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 867,345) Iyy in4: (mm4: 90,563) apexfacades.com 1.2 Pinnacle Pg- 76

77 Parts List Pinnacle 650 PART # CROSS SECTION DESCRIPTION NOTES " x 5" (63mm X 127mm) Split-Mullion, Male. (7" [178mm] O.A. System Depth Captured Glazing) (6.25" [159mm] O.A. System Depth SSG) Standard Length 289" (7341mm) Ixx in4: (mm4: 1,158,305) Iyy in4: (mm4: 43,467) " x 5" (63mm X 127mm) Split-Mullion, Female for Captured Glazing (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 1,835,785) Iyy in4: (mm4: 119,387) " x 5" (63mm X 127mm) Split-Mullion, Female for SSG (6.25" [159mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: (mm4: 1,491,296) Iyy in4: (mm4: 97,709) apexfacades.com 1.2 Pinnacle Pg- 77

78 Parts List PART # CROSS SECTION DESCRIPTION NOTES " (89mm) Reinforcing Sleeve for 4" (102mm) Mullion (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) Mill Finish " (114mm) Reinforcing Sleeve for 5" (127mm) Mullion (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) Mill Finish " (140mm) Reinforcing Sleeve for 6" (152mm) Mullion (8" [203mm] O.A. System Depth) Standard Length 289" (7341mm) Mill Finish apexfacades.com 1.2 Pinnacle Pg- 78

79 Parts List PART # CROSS SECTION DESCRIPTION NOTES " (165mm) Reinforcing Sleeve for 7" (178mm) Mullion (9" [229mm] O.A. System Depth) Standard Length 289" (7341mm) Mill Finish Alignment Sleeve for 4" (102mm) Split-Mullion (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) Mill Finish Alignment Sleeve for 6" (152mm) Split-Mullion (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) Mill Finish apexfacades.com 1.2 Pinnacle Pg- 79

80 Parts List PART # CROSS SECTION DESCRIPTION NOTES Thermally Broken Door Adaptor, Regular Ixx in4: (mm4: 938,990) Iyy in4: (mm4: 128,921) Standard Length 262" (6655mm) Adaptor for use with Pinnacle 600/650 and Keystome 500/550 Curtainwall. Available in split finish See Detail page Thermally Broken Door Adaptor, Wide Ixx in4: (mm4: 1,111,855) Iyy in4: (mm4: 261,230) Standard length 262" (6655mm) Integrates door into Pinnacle 600/650 and Keystone 500/550 curtain wall, with 1" IGU glazing. Recommended for use with electric strikes. Available in split finish Slimline Door Adaptor Standard Length 262" (6655mm) Slimline Door Adaptor Cap Standard Length 262" (6655mm) apexfacades.com 1.2 Pinnacle Pg- 80

81 Parts List PART # CROSS SECTION DESCRIPTION NOTES " (63mm) Pressure Plate - Regular Duty Standard Length 289" (7341mm) Mill Finish Prepunched with 0.275" (7mm) holes at 8" (203mm) on center " (63mm) Standard Cap.625" (16mm) Height Standard Length 289" (7341mm) " (63mm) Corner Cap.625" (16mm) Height Standard Length 289" (7341mm) " (63mm) Transom Cap.5" (12mm) Height, (Optional) Standard Length 289" (7341mm) apexfacades.com 1.2 Pinnacle Pg- 81

82 Parts List PART # CROSS SECTION DESCRIPTION NOTES " (63mm) Raised Profile Cap.875" (22mm) Height (Optional) Standard Length 289" (7341mm) Optional Jamb Adaptor for 1" (25mm) IG Unit Standard Length 289" (7341mm) Optional High Performance application. For use with pvc Jamb Adaptor part number Glazing Adaptor for 0.25" (6mm) Glazing Standard Length 289" (7341mm) Perimeter Flange Adaptor Standard Length 289" (7341mm) Thermally Improved profile Windload Bracket - Lineal Standard Length 144" (3658mm) Mill Finish 2.5" (63mm) sightline system apexfacades.com 1.2 Pinnacle Pg- 82

83 Parts List PART # CROSS SECTION DESCRIPTION NOTES " (6mm) Serrated Washer - Lineal Fabricated and punched to Customer Requirements Mill Finish Dead Load Bracket - Lineal Standard Length 144" (3658mm) Mill Finish A 3.5" (89mm) Shear Block for 4" (102mm) Mullion (6" [152mm] O.A. System Depth) Standard Length 1.18" (30mm) Mill Finish Transom-to-mullion connection Fabricated with installation holes A 4.5" (114mm) Shear Block for 5" (127mm) Mullion (7" [178mm] O.A. System Depth) Standard Length 1.18" (30mm) Mill Finish Transom-to-mullion connection Fabricated with installation holes apexfacades.com 1.2 Pinnacle Pg- 83

84 Parts List PART # CROSS SECTION DESCRIPTION NOTES A 5.5" (140mm) Shear Block for 6" (152mm) Mullion (8" [203mm] O.A. System Depth) Standard Length 1.18" (30mm) Mill Finish Transom-to-mullion connection Fabricated with installation holes A 6.5" (165mm) Shear Block for 7" (178mm) Mullion (9" [229mm] O.A. System Depth) Standard Length 1.18" (30mm) Mill Finish Transom-to-mullion connection Fabricated with installation holes A Shear Block For Corner Mullions Standard Length " (40mm) Mill Finish For Transom-to-corner mullion connections Fabricated with installation holes See Architectural Details in this section A 1.65" (20mm) Corner Key Mill Finish. For Thermally Broken Door Adaptor, Regular corner connection part number pc. per connection apexfacades.com 1.2 Pinnacle Pg- 84

85 Parts List PART # CROSS SECTION DESCRIPTION NOTES B 1.65" (42mm) Corner Key Mill Finish. For Thermally Broken Door Adaptor, Wide corner connection part number pcs. per connection A 1.77" (45mm) Corner Key Mill Finish. For Thermally Broken Door Adaptor, Regular corner connection part number pc. per connection A Setting Block Chair for 1.75" (44mm) Triple IG Glazing Captured Standard Length 4" (102mm) Mill Finish 0.5" (12mm) Bite A Setting Block Chair for 1.75" (44mm) Triple IG Glazing SSG Standard Length 4" (102mm) Mill Finish 0.875" (22mm) Bite A Setting Block Chair for 1" (25mm) Double IG Glazing Captured Standard Length 4" (102mm) Mill Finish 0.5" (12mm) Bite apexfacades.com 1.2 Pinnacle Pg- 85

86 Parts List PART # CROSS SECTION DESCRIPTION NOTES A Setting Block Chair for 1" (25mm) Double IG Glazing SSG Standard Length 4" (102mm) Mill Finish 0.875" (22mm) glazing bite, 0.75" (19mm) silicone weather bead A Setting Block Chair for 1" (25mm) Double IG Glazing SSG Standard Length 4" (102mm) Mill Finish 1" (25mm) glazing bite, 0.5" (12mm) weather bead A Sheer Block - Veneer Standard Length 1.18" (30mm) Mill Finish Fabricated with 2 fastening holes For use with 2.5"X2.5" (63mmX- 63mm) Mullion part number , 2.5" X 1" (63mm X 25mm) Mullion (Veneer) part number and 2.5" X 1" (63mm X 25mm) Open Back Mullion (Veneer) part number Efficiency Plus Thermal Break for 1" (25mm) Double Glazing Efficiency Plus 3 Thermal Break for 1.75" (44mm) Triple Glazing Jamb Adaptor Thermal Break for 1.75" (44mm) Triple Glazing Standard Length 288" (7315mm) Black Polyamide Standard Length 288" (7315mm) Black Polyamide Standard Length 288" (7315mm) Black PVC For use with Optional Jamb Adaptor part number apexfacades.com 1.2 Pinnacle Pg- 86

87 Parts List PART # CROSS SECTION DESCRIPTION NOTES #10-1 1/2" Pan Head Zinc Plated Self-Tapping Screw, Robertson Drive #10-1/2" SS (18-8) Pan Head Self- Tapping Screw, Robertson Drive #10-5/8" SS (18-8) Pan Head Self- Tapping Screw, Robertson Drive Ø1/4-20 X 1 1/2" Long SS (18-8) Robertson Drive Screw - Self Tap tip Ø1/4-20 X 2.25" LONG SS (18-8) Robertson Drive Screw - Self Tap tip #10-7/8" PAN Head Zinc-Plated Self-Drilling Screw, Shear block-to-mullion, mullion-to-transom attachment Unit: 100 piece Attachment of Door Stop Base part number to Mullion Attachment of Transom to Mullion via Shear Block Unit: 100 piece Attachment of Transom to Mullion Unit: 100 piece Attachment of Pressure Plate 1" (25mm) IG Unit Unit: piece Attachment of Pressure Plate 1 3/4" (44mm) IG Unit Unit: piece Attachment of vent frame into the curtain wall Captured Glazing Interior Gasket Material/Duro: EPDM/70 Color: Black Unit: Roll 200 Feet (61M) or 4 Sided SSG Glazing Gasket Material/Duro: Silicone/70 Color: Black Unit: Roll 250 Feet (76M) High Performance 3-in-1 Exterior Glazing Gasket Standard Pressure Plate Gasket at Edges Standard Pressure Plate Gasket at Center Material/Duro: EPDM/70 Color: Black Unit: Reel 100 Feet (30M) For use with 2.5" (63mm) pressure plate Material/Duro: EDPM/70 Color: Black Unit: Roll 200 Feet (61M) For use Pressure Plate at edges Material/Duro: EDPM/70 Color: Black Unit: Roll 200 Feet (61M) For use Pressure Plate at center apexfacades.com 1.2 Pinnacle Pg- 87

88 Parts List Main Seal Gasket Split Mullion Material/Duro: Silicone EDPM/70 Color: Black/Lubricated Unit: Roll 150 Feet (46M) Weather Seal Gasket, SSG Material/Duro: Silicone EDPM/70 Color: Black Unit: Roll 150 Feet (46M) /4" x 1 1/4" (6mm X 32mm) Setting Block, 4" (102mm) Long, SSG Glazing Material/Duro: Silicone/80 Color: Black Unit: pc /8" X 1 1/4" (3mm X 32mm) Setting Block, 4" (102mm) Long, Captured Glazing Pile Weatherstripping, 5/16" (8mm) Height High Performance Threshold Bulb Seal /4" X 1 3/4" (6mm X 44mm) Setting Block, 4" (102mm) Long /4" X 1 3/4" (3mm X 44mm) Setting Block, 4" (102mm) Long Material/Duro: Silicone/80 Color: Black Unit: pc. for use with captured glazing with 1/2" (12mm) bite in Keystone 500/550 and /650 Material: Fiber Pile with Fin Color: Grey Unit: Reel 1000 Feet (305M) For use with Standard Door Stops Material/Duro: TPE Color: Black Unit: Reel 500 Feet (152M) For use at Latch Threshold Material/Duro: Silicone/85 Color: Black Unit: pc. For use with 1.750" (44mm) Triple Glazing SSG Material/Duro: Silicone/85 Color: Black Unit: pc. For use with 1.750" (44mm) Triple Glazing Captured apexfacades.com 1.2 Pinnacle Pg- 88