SECTION COMPOSITE CLADDING. Display hidden notes to specifier. (Don't know how? Click Here)

Transcription

1 SECTION COMPOSITE CLADDING Display hidden notes to specifier. (Don't know how? Click Here) Copyright ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Composite cladding. B. Composite hybrid cladding. 1.2 RELATED SECTIONS A. Section Rough Carpentry. B. Section Sheathing. 1.3 REFERENCES A. Architectural Testing, Inc: 1. AA- 676: Third party testing. 2. Manufacturer's Code Compliance Research Reports: a. CCRR b. CCRR c. CCRR B. ASTM International (ASTM): 1. ASTM D635 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position. 2. ASTM D Standard Test Method for Determining Ignition Temperature of Plastics. 3. ASTM D Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics. 4. ASTM D Standard Specification for Establishing Performance Ratings for Wood- Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails. 5. ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials. 6. ASTM E330 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure. C. American Architectural Manufacturers Association (AAMA): 1. AAMA Voluntary Test and Classification Method of Drained and Back Ventilated Rain Screen Wall Cladding Systems

2 D. Florida Building Code and Miami Dade County Approval. E. International Code Council Evaluation Services (ICC-ES): 1. AC 10 - Acceptance Criteria for Quality Documentation. 2. AC 174 -Acceptance Criteria for Deck Board Span Ratings and Guardrail. F. JIS International (Japanese Industrial Standards): 1. JIS A Plastic Floor Parts. 2. JIS A Dressed Particleboards. 3. JIS K Plastics - Methods of Determining the Density and Relative Density of Non-Cellular Plastics. 4. JIS K Plastics - Determination of Temperature of Deflection Under Load. 5. JIS K Testing Method for Linear Thermal Expansion Coefficient of Plastics by Thermomechanical Analysis. 1.4 SUBMITTALS A. Submit under provisions of Section B. Product Data: Manufacturer's data sheets on each product to be used, including: 1. Manufacturer's printed installation instructions, showing required preparation and installation procedures. 2. Storage and handling requirements and recommendations. 3. Installation methods including anchorage details. 4. Cleaning and maintenance instructions. C. Shop Drawings: Provide shop drawings indicating details of construction, anchorage and installation. Include statement that anchorage methods comply with applicable building codes and loadings for the type of framing and condition of the supporting construction and details. D. Verification Samples: For each product specified, two samples 6 inches in length, representing materials, colors, patterns, textures, and finishes to be installed. 1. Closeout Submittals: Documentation of manufacturer's warranty. 1.5 QUALITY ASSURANCE A. Installer: Minimum 2 years experience with similar drainage mat/rainscreen materials. B. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship. 1. Finish areas designated by Architect. 2. Do not proceed with remaining work until workmanship and appearance are approved by Architect. 3. Subject to approval by Architect, mock-up may be retained as part of finish work. C. Pre-Installation Meetings: Conduct pre-installation meetings to verify project requirements, substrate conditions, construction documents, details and manufacturer's warranty requirements. 1.6 DELIVERY, STORAGE, AND HANDLING A. Delivery: Deliver materials in manufacturer's original, unopened, undamaged rolls/pallets with identification labels intact. B. Storage and Protection: Store materials protected from exposure to harmful environmental conditions and at temperature and humidity conditions recommended by the manufacturer.

3 1.7 PROJECT CONDITIONS A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits. 1.8 WARRANTY A. Manufacturer's Warranty: Manufacturer's standard limited 10 year warranty. PART 2 PRODUCTS 2.1 MANUFACTURERS A. Acceptable Manufacturer: Geolam, which is located at: 9 Shorncliffe Ave.;; Toronto, ON, Canada M4V 1S9;; Toll Free Tel: ;; Tel: ;; Fax: ;; request info (info@geolaminc.com);; Web: B. Substitutions: Not permitted. C. Requests for substitutions will be considered in accordance with provisions of Section COMPOSITE CLADDING A. Basis of Design: VERTIGO Composite Cladding as manufactured by Geolam. 1. Extruded recycled polypropylene composite bonded with recycled wood under zero moisture conditions. 2. Standards Compliance: a. ASTM D635. b. ASTM D c. ASTM D d. ASTM E 84. e. ASTM E330. f. AAMA 509. g. Florida Building Code and Miami Dade Approval. 3. Physical Properties: e. Linear Expansion Value: Zero per 4. Dimensions: a. Thickness: 5/8 in (14.5 mm). b. Width: 6-1/2 in (165 mm). c. Length: 12 ft (3.66 m). 5. Surfacing: Two brushed sides. 6. Fasteners: Stainless steel Vertigo clips. 7. Color: Teak. 8. Color: Rosewood. 9. Color: Ebony. 10. Color: Moleskin. B. Basis of Design: BORDA S BOARDS as manufactured by Geolam.

4 1. Extruded recycled polypropylene composite which is bonded with recycled wood under zero moisture conditions. 2. Standards Compliance: a. ASTM D635. b. ASTM D c. ASTM D d. ASTM E 84. e. ASTM E330. f. AAMA 509. g. Florida Building Code and Miami Dade Approval. 3. Physical Properties: e. Linear Expansion Value: Zero per 4. Dimensions: a. Thickness: 5/8 in (14.5 mm). b. Width: 6-1/2 in (165 mm). c. Length: 12 ft (3.66 m). 5. Surfacing: Two brushed sides. 6. Fasteners: See manufacturers recommendations. 7. Color: Teak. 8. Color: Rosewood. 9. Color: Ebony. 10. Color: Moleskin. 2.3 COMPOSITE HYBRID CLADDING A. Basis of Design: Vertigo 5010 Wood Hybrid Cladding as manufactured by Geolam. 1. Hot co-extrusion of aluminum and wood composite. 2. Physical Properties: e. Linear Expansion Value: Zero per g. Core in Anodized Aluminum Alloy: A60635S-T5. 3. Width: 7-1/4 in (184 mm). Exposure: 6-1/2 (165 mm). 4. Depth: 1/2 in (13 mm). 5. Length: 12 ft (3658 mm). 6. Length (ft / mm):. 7. Weight: lbs per ft. 8. Color: Teak. 9. Color: Rosewood. 10. Color: Ebony. 11. Color: Moleskin. a. b. Moisture Absorption Value 24 hours at 65 degrees F (20 degrees C): 0.2 per

5 c. Linear Expansion Value: Zero per d. Aging Test Value: 5 percent per JIS Dimensions: a. Width: 8 in (203 mm). b. Depth: 1-3/8 in (35 mm). c. Length: 9 ft 10 in (3000 mm) d. Length (ft / mm):. 13. Color: Teak. 14. Color: Rosewood. 15. Color: Ebony. 16. Color: Moleskin. B. Protect installed work from damage due to subsequent construction activity on the site. C. Clean using materials recommended by the manufacturer to remove stains, dirt and debris prior to final acceptance. END OF SECTION