Product Data Catalog

Transcription

1 Reusable Modular Wall System for Construction Containment & Critical Care Isolation Product Data Catalog

2 Introduction The STARC modular containment system utilizes a number of interchangeable components to create a safe, secure, dustless separation wall for many uses including construction renovation, critical care isolation or temporary isolation applications. Developed in the healthcare construction environment, the STARC System has been engineered to be used for years without maintenance. The all metal reusable modules are designed for maximum durabilty, ruggedness, ease of use and resistance to cleaning agents. A full compliment of wall panels, doors, wall interfaces and anchoring brackets provides a complete toolkit to handle any containment scenario. Features and Benefits: Ÿ Ÿ Ÿ Fast - Install 100 ft of wall in 1 hr! Clean and Green - Dustless containment with no disposal waste. Quiet - Reduce workplace sound intrusion; allows contractors to work during normal hours. Ÿ Cost Effective - Payback in 3-5 uses replacing temporary plastic or drywall barriers. Ÿ Infection Control - All surfaces are easily and readily disinfected; Controls dust migration from the dirty side. Hallway Barrier Example Sample Configurations: System Components Installation 18 Panel 24 Panel 32 Panel 42 Panel Wall Interface Flex Corner Door Air Panel 8 Hall Barrier HD 4 8 x 10 Ante Room HD Wall Barrier HD 32 9 MACU Room HD 24 9 Grid Clips pds-0002 rev 1.0

3 Wall Panels Clean white exterior for finished appearance; durable galvanized steel interior surface Standard widths of 18, 24, 32 and 42 Panels extend seamlessly from 6-10 to 10-4 Unique connection system between all modules - no tools or brackets One tool setup to adjust height Fully gasketed - air tight system Dustless installation and removal Sound attenuating - reduces airborne noise Rugged and durable all metal construction - many years of service Complete GREEN solution - No disposal waste Performance Specifications: The modular system is engineered to meet or exceed all required standards for temporary partitions for interior applications. Our system performs to the following criteria: Interior non-load bearing applications only Humidity: Up to 90% RH non-condensing Max pressure differential:.05 w.c. Max floor pitch: 1/8 per foot Max floor roughness < 1/8 variance Chemical compatibility: May be cleaned or disinfected with all common water and solvent based cleaners and disinfectants System E-84 certified for Class A flame spread and smoke generation. (ETL C#: ) Panel Width System elements Patent Pending One Wrench does it all! Part Number 18 S1-WM S1-WM S1-WM S1-WM-42 No Tool Connection Between Modules - Just Lift and Drop Custom Sizes available - Contact sales pds-0100 rev 1.0

4 Negative Air Panels Standard STARC modular panel with integrated air exhaust register and pressure monitor ports Panels extend seamlessly from 6-10 to 10-4 Standard duct collar - 12 dia; 8 & 10 Available upon request Integrated air pressure ports - one each side Configured to integrate optional recording differential pressure monitor Supports all common data recorders Internal passage for power cords - front to back Rugged and durable all metal construction Complete GREEN solution - No disposal waste Digital Pressure Monitor Ready (Monitor Optional) System elements Patent Pending Panel Width Part Number 18 S1-AIR S1-AIR S1-AIR S1-AIR-42 Integrated pressure ports Connects to any monitor 12 Exhaust Duct standard Ÿ 8 and 10 available Sealed port for air monitor power cable pds-0101 rev 1.0

5 Corners Corners follow module interface standard - simple and quick connection Air Tight seal against air / dust intrusion Seamless telescoping from 6-10 to 10-4 Flexible corner provides deg angle, flips over for inside or outside use Rugged all metal construction - fireproof deg Flexible Corner Single Assembly for Inside or Outside Corner degree angle Telescopes to 10-4 Module Flexible Corner Part Number S1-FC pds-0103 rev 1.0

6 Wall Interfaces Corners follow module interface standard - simple and quick connection Sealed for air / dust intrusion Seamless telescoping from 6-10 to 10-4 Use the Filler Panel module to create a narrow width panel or to cope against wall details (handrails etc) Wall Interfaces allow 1-3/4 adjustment to fill gaps and will allow fit to non-plumb walls or over wall plates, etc. Right Wall Interface Extend to fill small gaps or to nonplumb wall with foam gasket on right side Left Wall Interface Extend to fill small gaps or to nonplumb wall with foam gasket on left side Filler Panel Adapter Use a full height 5/8 drywall piece to make up odd panel sizes or fit against wall details Module Right Wall Interface Left Wall Interface Filler Panel Part No. S1-RWI S1-LWI S1-FP pds-0104 rev 1.0

7 Doors Prehung Doors with Standard Module Interface Frames Available in 36 and 48 clear openings Height Adjustable from 6-10 to 10-4 ; with integrated telescoping Over the Door Panel Kit Full gasketing and brushes for air / dust seal Swing Doors easily changed to swing in/out Deadhook set and ICU latch standard on Sliding door Commercial Quality Schlage Lockset and Yale closer standard for Hinged Doors Crash Bar Operator for Hinged Door Option Tempered Glass Vision Kits available Mechanical and electronic lockset options Interchangeable Core Options (BEST / SFIC, FSIC) Swing Door Shown with Integrated Over the Door Panel Kit - Swings In or Out - Sliding Door (ICU and Deadlatch Standard) Module Part Number Clear Opening 42 Swing Door S1-HD-42H 36 x Swing Door S1-HD-54H 48 x Sliding Door S1-SD x Sliding Door S1-SD x 78 pds-0105 rev 1.1

8 Door Options Mechanical Electronic (Hinged Doors) Electronic (Sliding Door) Keypad Options Hinged and Sliding Door - All Key Override Swing Door Crash Bar Operator Vision Kit 4 x 25 - Standard Crash Bar Handle Set Standard Key Cylinder included Module Part Number Example 42 Swing Door-CB S1-HD-42CB 54 Swing Door-CB S1-HD-54CB Mechanical Keypad Use M suffix (S1-HD-42M) Electronic Keypad Use E suffix (S1-SD-54E) Vision Kit S1-VK pds-0105 rev 1.0

9 Optional Accessories Ceiling Grip Clip: Secure panels to the ceiling grid; accomodates 9/16 or 15/16 grids; connect at any angle Ceiling Grip Clip - Ultraline: Secure panels to the ceiling grid; accommodates Ultraline grids; connect at any angle Floor / Wall Bracket: Angle bracket to anchor panels to walls or floors; Panel Top Bracket: Mount this bracket to the tops of panels allowing a drywall to be constructed to reach the deck Quad Joiner Plate: Lock adjacent panels together Module Grid Clip - 9/16-15/16 Grid Clip - Ultraline Floor / Wall Bracket Quad Joiner Plate Drywall Interface - Panel Top Part Number S1-FGC S1-FGC-U S1-FWB S1-JP S1-PTB pds-0106 rev 1.0

10 Transport Carts Securely transport panels and accessories, minimizing potential for damage. Panel Cart carries 8 panels Fits through a standard 36 door opening (32 overall) Great for storage between projects Panels secured with supplied ratchet straps; shipped with 5 non-marking swivel casters Optional 8 non-marking casters provide handling across ramps and into trucks Accessory Cart holds 6 panels and up to 6 corners, wall interfaces or other accessories, plus has a parts tray on top Trays hold up to 9 accessories plus hardware Panel Cart Engineered for fork lift handling Cart Part Number Capacity Panel Cart S1-MC 8 panels Accessory Cart S1-AC 6 panels + 9 acc. Upgrade to 8 casters S1-MC-C8 Accessory Cart pds-0102 rev 1.0