RG-59, RG-59+2DC, UTP CAT6, SFTP CAT6

Transcription

1 FLAT ELEVATOR CABLE RG59, RG59+2DC, UTP CAT6, SFTP CAT6 COPPER SERIES MAIN FEATURES ASTEL RG59 Lift Monitor cablescopper Series are designed and manufactured to Ultra flexibility demand of CCTV Cameras in Elevator applications. ASTEL FEC UTP CAT6 BC models are Dual jacket CAT6 cables featuring stranded copper conductors and twisted to form 4Pairs. It features Inner jacket and outer jacket for excellent network performance parameters ASTEL FEC SFTP CAT6 BC features Dual jacket with dual shielding. It can be used in highly electromagnetic noise environments for IP Cameras and networking applications. Outer jacket is made of highly flexible PVC which provides extra tensile strength for longer runs in Elevator. Page 1 FEC059V

2 FLAT ELEVATOR CABLE CC5995CBV CT5995CBV FEC CU5995CBV2DC10+2S FECSFTPCAT6BC FECUTPCAT6BCB FECCU5995CBV+2S FECUTPCAT6BCA Page 2 FECUTPCAT6BCB FECUTPCAT6BCB

3 FLAT ELEVATOR CABLE UTP CAT6 Model: FEC UTP CAT6 BC (Dual Jacket) FECUTPCAT6BCA FECUTPCAT6BCA FECUTPCAT6BCB Product Introduction: ASTEL Flat Elevator Cables are designed and manufactured to Ultra flexibility demand of CCTV Cameras in Elevator applications. ASTEL FEC UTP CAT6 BC has Stranded Copper as a center conductor with HDPE Insulation and Dual jacket. It has two GI Steel Strength members on either side of the center conductor. All the cores are protected with Ultra Flexible PVC Jacket for repeated bending and traveling of elevators. Applications: Elevator traveling cable for indoor and panoramic elevators IPC Cameras in Elevators Video Monitoring in Cranes Support All CAT6/Class E applications (10BaseT, 100BaseT, 1000BaseT, ISDN Maximum channel length 65m (transceiver to receiver) Page 9.com

4 Technical Specifications: Model Product Cable Description Conductor Conductor Structure Conductor Cross Section Area Insulation thickness 1st Jacket Dia 1st Jacket Thickness Overall Jacket Overall Jacket Size Minimum Jacket thickness (in ends) Maximum Jacket thickness (in center) Overall Jacket Color Power Cable Conductor Conductor Structure Conductor Size mm2 Strength Wires Material Construction Conductor Size Electric Specifications Pair to Pair Pair to Outer Jacket Conductor Resistance (max) Impedance Capacitance Flame Propagation Mechanical Specifications Free Suspension length Lifting Height (tied with cable ties at specified intervals) Operating Temp Sheath Tensile Strength before aging Sheath Elongation before aging Packing1 Packing2 Packing2 FEC UTP CAT6 BCA+2S FEC UTP CAT6 B A +2DC10+2S FEC UTP CAT6 BCB+2S Flat Flexible Elevator Cable UTP CAT6 Design A 15.5x7.90mm 6.3 mm 7.9 mm EN Max 45 meter 15 C to+70 C 10.0 N/mm Kg 25.0 kg 300m 38.5 Flat Flexible Elevator Cable UTP CAT6 with Power Design A 17.3 x 7.9 mm 6.3 mm 7.9 mm Bare Copper 2x32x mm 2 EN Max 45 meter 15 C to+70 C 10.0N/mm 2 Flat Flexible Elevator Cable UTP CAT6 Design B 13.3 x 7.90 mm 5.9 mm 7.2 mm kg kg kg 25.0 kg 300m NA 50.5 kg NA EN Max 35 meter 15 C to+70 C 7.0N/mm 2 Page 10

5 Installation Notes: All Models Flexible cable should be tied with the cable rope by using high tensile cable ties at a gap of every 10 cm. When fixing the connectors, please give five loops of cable atleast with 20 cms diameter and then fix the metal shielded RJ45 Connector. Metal Shielded connector should be with Boot and can be directly plugged in the IPC. Technical Notes All Models DC resistance changes at the rate of 0.393% /ºC. Sequential meter marking on all cables. Higher core sizes cables also available. Disclaimer 1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice. 2. All pictures are for illustrative purposes only. Actual product may be different in color and size, which may appear in product specifications. 3. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not responsible for any loss, directly or indirectly caused by any error in publishing. 4. E&OE (Errors and Omissions are excepted) Page 11