Moisture Content Meter for Wood and Building Material MC-160SA

Transcription

1 Moisture Content Meter for Wood and Building Material -160SA APPLICATINS & FEATURES The New -160SA is a microprocessor controlled hand-held moisture meter. It is reliable and simple to use and intended for rapid and non-destructive evaluation of the moisture content of wood and building materials, The -160SA can be used in production, inspection control and detection of water damages. In many cases, Relative Humidity (RH) is a more appropriate term. For this reason, the -160SA is programmed to calculate the RH value from the moisture content value for building material. Direct read out of Moisture Content in percent water or in RH% Non Penetrating Auto power ff Selectable Alarm Threshold Audio Alarm Hold Function -160SA SPECIFICATIN Woodworkers, Cabinet and furniture makers Flooring installers, Contractors and quality assurance INTENDED USERS inspectors. Anyone who needs a professional quality tool to inspect wood and building materials for accurate moisture content or relative humidity. NEW! Ytong, Bricks, Wall tiles, Plaster, Eternit slab, Floor tiles, Sand, PVC/Linoleum on concrete, Concrete, concrete slab, Clinker. 230 different species of wood MEASURING RANGE - MISTURE CNTENT MEASURING RANGE - RELATIVE HUMIDITY Capacitance type Detection of dielectric changes due to variation of Moisture Content in the material using a High Frequency signal. Building material: 0-98% RH Wood: 0-85% RH Building material: 0-16% H 2 MEASURING ACCURACY Approximately ± 1 % MEASURING GRUPS 12 SCANNING DEPTH (FIXED) 0-50 mm AUTMATIC SHUT DWN BATTERY WARNING WRKING RANGE -10 C/+60 C LCD digital RESLUTIN 0,1 % CASING ABS Plastic SENSR Chrome Plated steel BATTERY 9 V alkaline CASE Artificial Leather 132 x 62 x 30 mm WEIGHT (INCL. BATTERY) 150 g % H 2 Complete with following accessories: 9 Volt battery and Carrying Case

2 Moisture Content Meter for Wood and Building Material -380XCA Dual Scanning Range 10/100 mm APPLICATINS & FEATURES The New -380XCA is a microprocessor controlled handheld moisture meter. It is reliable and simple to use and intended for rapid and non-destructive evaluation of the moisture content of wood and building materials, The - 380XCA can be used in production, inspection control and detection of water damages. In many cases, Relative Humidity (RH) is a more appropriate term. For this reason, the -380CXA is programmed to calculate the RH value from the moisture content value for building material. It also has two selectable scanning depths: 10 mm and 100 mm. Direct read out of Moisture Content in percent water or in Relative Air Humidity (RH%) Dual scanning Depths (10 mm and 100 mm) Non Invasive measurement Extended Material Selection groups. Selectable Alarm Threshold Audio Alarm Hold Function Density selection of wood Groups Scanning Depth 10 mm - Measures only the Wooden Floor Scanning Depth 100 mm - Scans the complete Concrete slab. Scanning Depth 100 mm, - Can detect moisture within an entire support Beam.

3 SPECIFICA- TIN INTENDED USERS WD BUILDING MEASURING RANGE - CNCRETE MEASURING RANGE - MISTURE CNTENT MEASURING ACCURACY MEASURING GRUPS (DENSITY RANGE) SCANNING DEPTH (SELECTABLE) AUTMATIC SHUT DWN BATTERY WARNING WRKING RANGE -380XCA Woodworkers, Cabinet and furniture makers Floor-ing installers, Contractors and quality assurance inspectors. Anyone who needs a professional quality tool to inspect wood and building materials for accurate moisture content or relative humidity. 230 different species of wood or user defined by density. Ytong, Bricks, Wall tiles, Plaster, Eternit slab, Floor tiles, Sand, Sand stone, Lime stonepvc/linoleum on concrete, Concrete, concrete slab, Clinker. Capacitance type, non intrusive. Detection of dielectric changes due to variation of Moisture Content in the material using a High Frequency signal. Building material: 0-98% Relative air Humidity (RH) Wood (@ 200 kg/m 3 ): 0-85% H 2 Building material: 0-11% H 2 The Maximum value differs depending of the density of the material. Approximately ± 1 % 50 Wood Groups. ( kg/m 3 ) 19 Building Materials Groups. ( kg/m 3 ) Internal sensor: Maximum 10 mm. 15 mm at high density materials. Measuring Springs: Maximum 100 mm, 30 Seconds 0 C/+60 C LCD digital 3 ½ Digits RESLUTIN 0,1 % CASING SENSRS BATTERY CASE WEIGHT (INCL. BATTERY) ABS Plastic Stainless Feather Steel Springs Built in. 9 V alkaline, L6R22 Artificial Leather 150 x 71 x 25 mm 165 gram Delivered complete with following accessories: Battery and Carrying Case Manual in English, German and Swedish. Technical modifications reserved

4 Moisture Content Meter for Paper and Carton -60CPA APPLICATINS & FEATURES NEW! The New -60CPA is a microprocessor controlled hand-held moisture meter. It is reliable and simple to use and intended for rapid and non-destructive evaluation of the moisture content of paper, tissue carton and card board. The -60CPA can be used in production, inspection control and further treatment of paper materials. Direct read out of Moisture Content in percent water. Non Penetrating Auto power ff Selectable Alarm Threshold Audio Alarm Hold Function SPECIFICATIN INTENDED USER MEASURING RANGE -PAPER -60CPA Quality inspectors in production of Paper and Fiber Boards, Packing Industry, Publishers Print shops and Libraries Carton, Cardboard, Paper, Tissue Filter Paper, Crepe paper, Package paper, fluting paper, Kraft paper, ffset paper, Corrugated Fiberboard Capacitance type Detection of dielectric changes due to variation of Moisture Content in the material using a High Frequency signal. Paper: 0-33% H 2 Cardboard: 0%-175 % H 2 MEASURING ACCURACY Approximately ± 2 % MEASURING GRUPS 12 SCANNING DEPTH (FIXED) 0-50 mm AUTMATIC SHUT DWN BATTERY WARNING WRKING RANGE -10 C/+60 C LCD digital RESLUTIN 0,1 % CASING ABS Plastic SENSR Chrome Plated steel BATTERY 9 V alkaline CASE Artificial Leather 132 x 62 x 30 mm WEIGHT (INCL. BATTERY) 150 g Complete with following accessories: - 9 Volt battery - Carrying Case % H 2

5 Professional Mouisture Content Meter for Wood -400 A/B APPLICATINS & FEATURES The -400 measures the moisture content level in sawn timber. It displays the moisture content level in % H 2. The instruments has an average adjustment for European wood based on a wood temperature of 20 ºC. -400A is delivered with S-10 Probe -400B is delivered with S-30 Probe, Sliding hammer. High Measuring Range 3-100% H 2 Large LCD Display Replaceable Electrodes 240 Woodgroups SPECIFICATIN INTENDED USER -400 Woodworkers, cabinet and furniture makers, drying kiln personell and quality assurance inspectors. Anyone who needs a quality tool to inspect wood or wood products for accurate moisture content MEASURING RANGE Wood ( 240 Species) Resistance type Detection of resistance changes due to variation of Moisture Content in the material using a DC signal. Wood: % H 2 MEASURING ACCURACY Approximative. ± 1.0% MEASURING GRUPS MEASURING DEPTH (FIXED) WRKING RANGE (Temp) 4 (240 species) 8 mm -10 C/+100 C Accessories: S-10 Probe, S-30 Sliding hammer probe Surface Electrodes Connection Cable 2 m. Calibration Block Calibration Block Spruce, Fir WRKING RANGE (Humidity) 0-85 % Non condensing LCD RESLUTIN 0,1 % SENSR Pin-type / Electrodes S-10 Standard Probe S-30 Sliding hammer Prope. BATTERY 9 V Alcaline battery CASE WEIGHT (INCL. BATTERY) Soft carrying case 145 x 80 x 40 mm 240 g S-30 S-10 Teflon Insulated electrodes Total Length Measuring depth 45 mm 30 mm 60 mm 45 mm Steel Electrodes Total Length Measuring depth 15 mm 12 mm 22 mm 19 mm 30 mm 27 mm Complete with following accessories: The -400 is delivered with batteries, External -probe and Hard case. % H 2 Steel electrodes Teflon insulated electrodes

6 MISTURE INDICATR FR WD AND BUILDING BDD Mini APPLICATINS & FEATURES The BDD mini pin- moisture meter used by Constructors, House Inspectors, Woodworkers, and Homeowners for rapid detection of moisture content in wood- and construction materials. The BDD mini is very easy to use and powerful to detect, track and locate moisture levels, moisture related problems, dampness and leaks in walls, floors and roofs. Applications: Detect dampness and related moisture problems Check surface moisture before painting, varnishing and other surface treatments Locate/track source for leaks and dampness Classify construction materials as wet/dry Check moisture level in wood materials, cement, concrete, mortar, plaster, asbestos boards and bricks Use measuring result from a dry area as reference value SPECIFICATIN MEASURING RANGE BDD-Mini Wood- Building Materials Resistance type Wood: 6-60 % H 2 Building material: 6 60% H 2 ACCURACY Wood 6-60 % ± 1.5 % BATTERY WARNING LCD 3 ½ digits RESLUTIN 0.1 % BATTERY 12 V Alkaline, 8LR23, 1 pce 75 x 38 x 15 mm WEIGHT (INCL BATTERY) 35 g The BDD Mini is delivered with battery ready to use.

7 Mouisture Meter for Wood and Building Material -411 APPLICATINS & FEATURES The -411 is used to measure the moisture level in sawn timber (also cardboard, paper) and buliding materials (plaster, concrete and mortar). Immediate display of the moisture level in the material. NEW! Auto Power n /ff Built in Calibration Test for Wood and buliding material Automatic Battery Warning Replaceable Electrodes SPECIFICATIN MEASURING RANGE MEASURING GRUPS MEASURING DEPTH (FIXED) AUTMATIC SHUT DWN BATTERY WARNING RESLUTIN Wood ( 150 Species) Resistance type -411 Wood: 6-44 % H 2 Building Material: % H 2 2 (Wood/ Building Materials) 8 mm After 15 Minutes LCD digital BAR-graph Wood 1 % Material: 0.2% Ambient temperature: 0-40 C Ambient Relative humidity: 0 85 %RH BATTERIES 3 Cr 2032, replaceable 130 x 40 x 32 mm WEIGHT (INCL. BATTERY) 100 g The -410 is delivered with batteries. % H 2

8 Moisture Indicator for Concrete, Gypsum & Wood -420 APPLICATINS & FEATURES The New -420 indicates the moisture content level in Gypsum, Concrete. and Wood. It displays the moisture content level digits. The Pin less Moisture Meter is an electronic dampness indicator with a measuring process working on the principle of high frequency measurement. The instrument is used for non-destructively tracing dampness in building materials of all kinds as well as for detecting damp distribution in walls, ceilings and floors. It is particularly suitable for pretesting the readiness of building materials for covering prior to Relative Humidity (RH) or CM measurements. NEW! Quickly indicate the moisture content of materials such as Concrete and Wood Depth of penetration about mm. Low battery indication Auto Power ff MAX/MIN Function Measure and HLD Function White Backlit LCD Display SPECIFICATIN INTENDED USER MEASURING RANGE MEASURING DEPTH (FIXED) AUTMATIC SHUT DWN BATTERY WARNING SENSR BATTERY WEIGHT (INCL. BATTERY) -420 Flooring installers, Painters, contractors and quality assurance inspectors. Anyone who needs a quality tool to detect moisture and water damages Gypsum Concrete Wood Hi frequency method. Detection of capacitance changes due to variation of Moisture Content in the material digits mm LCD digital Metal spheroid 9 V 180 x 45 x 35 mm 180 gram % H 2

9 Professional Moisture Content Meter for Wood -460 S-10/S-30 APPLICATINS & FEATURES The new -460 is an enhanced version of the well proven moisture meter It measures the moisture content level in sawn timber. With its unique polarisation feature quick and stable readings is obtained even at high Moisture Content levels. The -460 displays the moisture content level in % H 2. The instrument has an average adjustment for European wood based on a wood temperature of 20 ºC can be delivered with a S-10 Probe or a S-30 Probe, Sliding hammer. High Measuring Range 3-140% H 2 Fast and accurate measurement at high moisture content levels with the new Polarisation feature. Large LCD Display Replaceable Electrodes 240 Woodgroups NEW! SPECIFICATIN INTENDED USER MEASURING RANGE -400 Woodworkers, cabinet and furniture makers, drying kiln personell and quality assurance inspectors. Anyone who needs a quality tool to inspect wood or wood products for accurate moisture content Wood ( 240 Species) Resistance type Detection of resistance changes due to variation of Moisture Content in the material using an electrical signal. Wood: % H 2 MEASURING ACCURACY Approximative. ± 0.5% MEASURING GRUPS MEASURING DEPTH WRKING RANGE (Temp) WRKING RANGE (Humidity) 6 (240 species) 8-60 mm depending on Electrodes -10 C/+100 C 0-85 % Non condensing LCD RESLUTIN 0,1 % SENSR Pin-type / Electrodes S-10 Standard Probe S-30 Sliding hammer Prope. BATTERY 9 V Alcaline battery 6LR21 CASE WEIGHT (INCL. BATTERY) Hard case 134 x 72 x 25 mm 160 g Complete with following accessories: The -400 is delivered with batteries, External -probe and Hard case. % H 2

10 Accessories: S-10 Probe, S-30 Sliding hammer probe Surface Electrodes Long Connection Cable, 2 m. Calibration Block Teflon Insulated electrodes Total Length Measuring depth 45 mm 30 mm 60 mm 45 mm Facts When measuring with an electrical resistance meter a current is flowing into the wood piece. This current is actual ionizing the material that the wood contains of ( Cell membrane, water etc.) As an result the resistance fluctuates giving a fluctuation and drift of Moisture Content readout. n higher Moisture Content levels the accuracy of the measurement depends on how well the user is to make an estimate of average the varying value. With the new polarization feature the ionizing is avoided so that the -460 provides fast and stable measurements to the User. Steel Electrodes Total Length Measuring depth 15 mm 12 mm 22 mm 19 mm 30 mm 27 mm S-10 Steel electrodes Teflon insulated electrodes S-30

11 Moisture Indicator for Wood and Building Materials -500 APPLICATINS & FEATURES The -500 allows moisture detections in wood down to a depth of approximately 40 mm. It is designed for quick-response detection of moisture content in wood and building materials as well as locating wet areas in floors, roofs and walls made of homogeneous material. It is even able to detect moisture behind ceramic tiles or behind and under various floor or wall coverings. Simply place device on top of the surface to be examined no injection into the object required! -500 can be used for: Detection of moisture in wood and other building materials Detection of leakage Finding electrical cables and reinforcement bars Pin-less & non-destructive: Capacitance measurement using a high frequency dielectric field Used on different materials such as wood, concrete, cement wash floor, brick, plaster, gypsum board, clinker and clay floor tiles, sandstone, marble, etc. Quickly indicates the moisture content of materials Moisture detection down to a depth of Approximate.. 40 mm Low battery indication Impact resistant ABS housing Complete with 9 V battery SPECIFICATIN -500 Measuring range: 0 30 % moisture content Field penetration depth: mm Depending om material density Working conditions, temp / RH: 0 to +50 C / 0 to 80 % (non condensing) Storage temperature: -20 to +70 C Display: 3 ½- digit, 13 mm high LCD-display Resolution: 0,1% Power supply: 9 V alkali battery (type IEC 6F22) Power consumption: 5 ma Low battery warning: Automatic warning BAT if battery is low. Housing material: Impact resistant ABS housing Dimensions: 106 x 67 x 30 mm Weight approximate.: 150 g. incl. battery Warranty: 1 year The -500 is delivered with battery ready to use. % H 2

12 Moisture Indicator for Boats and Caravans -550 APPLICATINS & FEATURES To buy a Boat or a Caravan is a major investment! Mistakes could be quite costly. With -550 moisture detector it is easy to detect hidden faults. Identify presence of osmosis (surface blistering) in fiberglass/polyester boat hulls (GRP) Identify if wooden boats are dry before painting or varnishing For detection and tracing of leaks Find electrical cables and metal bars Ideal for: Boat and caravan buyers Boat and caravan owners Marinas Inspectors Easy to use. The moisture content of materials is quickly indicated Pin-less & non-destructive: Capacitance measurement using a high frequency dielectric field Measuring depth approximate. 40 mm Low battery indication Impact resistant ABS housing SPECIFICATIN -550 Measuring range: 0 30 % moisture content Field penetration depth: 40 mm Working conditions, temp / RH: 0 to +50 C / 0 to 80 % (non condensing) Storage temperature: -20 to +70 C Display: 3 ½- digit, 13 mm high LCD-display Resolution: 0,1% Power supply: 9 V alkali battery (type IEC 6F22) Power consumption: Approximate. 5 ma Low battery warning: Automatic warning BAT if battery is low. Housing material: Impact resistant ABS housing Dimensions: 106 x 67 x 30 mm Weight approximate.: 150 g. incl. battery Carrying case: Soft, artificial leather Warranty: 1 year The -550 is delivered with battery ready to use. % H 2