MEVA FormSet. System-independent accessories

Transcription

1 MEVA FormSet System-independent accessories

2 Box out solutions made simple Box out corner Easier working, lower labour costs MEVA's box out solutions offer the unbeatable advantages of easy handling coupled with high speed and precision during formwork assembly and stripping. In next to no time, four box out corners can be fitted as a box out set. Different plywood lengths allow flexible use. The attachment of chamfer strips to the formwork is recommended for the best possible results. The entire box out is opened and closed by operating the four box out corners with the captive MEVA wedges already a familiar feature of the assembly locks. The box out corners are screwed to the plywood pieces and locked in place by the integral wedges to ensure that nothing is lost. Boxing out in next to no time The complete box out set with plywood is fitted to the formwork along with the chamfer strips. The door spindles serve to resist the fresh concrete pressure. The formwork is closed and filled with concrete. The remaining operations take no time at all: the formwork and door spindles are released, wedges opened and the plywood pieces removed.

3 i Simply smart Æ Æ Fast and straightforward Reusable Saves time, money and materials Formwork assembly and stripping in next to no time Incorrect measurements impossible, foolproof assembly Easy to use Products Fast and flexible MEVA box out corners can accommodate everything from small door spindles to large EuMax props. The box out lengths and widths are a function of the plywood lengths. Standard wall thicknesses of 20, 24, 25 and 30 cm are available other wall thicknesses can be supplied upon request. Even the use of alkus all-plastic form facings is possible. Panel Ref. no. thickness Box out corner WT mm Box out corner WT mm Box out corner WT mm Box out corner WT mm Box out corner WT mm Box out corner WT mm Box out corner WT mm Box out corner WT mm Box out corner WT mm Box out corner WT mm Door spindle MFS Door spindle MFS

4 Smart anchoring Anchor solutions MEVA's intelligent and wide-ranging anchor solutions for single- and double-sided assemblies ensure fast, straightforward and reliable attachment of panels, tie rods and MEVA stop-ends. These anchor solutions offer easy handling and versatile use, among other things, for the following applications: Ground slabs where support frames are used (single and double anchors plus anchor supports) Attachment of panels (spiral anchors) Attachment of brace brackets (double-headed soil nail 25/480) Extension of cast-in anchoring (coupling nut) Determination of anchor tensile forces (load cells/pressure gauges) i Simply smart Easy handling Versatile use Anchor supports DW 15 - DW 26.5 The anchor support, which is bent at an angle of 45, is used for attaching to the top reinforcement and secured by means of integral adjusting screws. It takes tie rods DW 15, DW 20 and DW 26.5 that are attached by an integral adjusting screw. Anchor supports are particularly suitable for use in conjunction with MEVA support frames.

5 Nailable connector Made from red plastic, the nailable connector for fair-faced concrete DW 15 is used to attach anchor sleeves DW 15 to the facing. Fair-faced concrete plug The fair-faced concrete plug DW 15 is used to seal the nailable connector for fair-faced concrete. It is glued in with concrete glue A + B. Remover for soil nail Products Ref. no. Single anchor DW Single anchor DW Single anchor DW Double anchor DW Double anchor DW Spiral anchor DW 15/ Anchor sleeve DW Anchor sleeve DW Nailable connector DW Plug Plug Plug Fix anchor DW Fix anchor DW Fix anchor DW Planing cap DW Coupling nut DW Coupling nut DW Coupling nut DW Fair-faced concrete plug DW Nailable connector for fair-faced concrete DW 15 Concrete glue A + B Pressure gauge 250 kn Pressure gauge 400 kn Double-headed soil nail 25/ Extractor for soil nail Water stop DW Water stop DW Anchor support DW 15 - DW Adjustable wrench Wrench MFS

6 Smart anchoring Quick anchor DW 15 Reliable, durable, reusable The quick anchor DW 15 is suitable for both ground and suspended slabs. It is ideal for installing safe anchorings with the flange screw 18 or tie rod DW 15 for braces, shoes for safety mesh, single-sided propping and a wide range of other uses. The quick anchor DW 15 (SW 17) can be extracted together with the anchor plate by means of a power screwdriver or ratchet and reused for the next concrete pour. As the spiral spring remains in the concrete, all that is required for the next operation is simply to place a new spiral spring on the anchor. Option 1 The quick anchor is simply pressed into the fresh concrete. The required concrete cover is achieved through adjustment of the anchor plate. Option 2 Prior to casting the ground or slab, the quick anchor is attached to the reinforcement with the quick-anchor holder. This allows exact positioning of the quick anchor. Anchor plate for quick anchoring Spiral spring for quick anchoring, untreated, left in place in concrete The anchor can be extracted by means of a power screwdriver, ratchet or open-end spanner (size 17). The versatile quick anchor can be used for a diversity of attachments as here, for example, with brace frames.

7 i Quick anchor DW 15, without quick-anchor holder Simply smart Reusable No screw anchors needed 20 Diagonal pull anchor Quick-anchor holder allows exact positioning of anchor and attachment to reinforcement 30 Products Ref. no. Quick anchor Spiral spring Quick anchor DW 15 anchor plate Quick anchor fixture DW Spiral anchor DW 15/ Tensile force N perm [kn] Transverse force Vperm [kn] Minimum concrete strength fck [N/mm²]

8 No waiting times lower costs Tie rod fixture Always in the right place The MEVA tie rod fixture allows the reliable attachment of two tie rods DW with articulated flange nuts, XT tie rods DW 20 or XT taper ties 20 to wall formwork panels so that they are in exactly the right place and ready for use whenever they are needed. The tie rod fixture attaches easily and conveniently to the multi-function profile. When moving formwork, there are no waiting times for accessories or small parts boxes. Permanently reusable for all MEVA wall formwork systems: AluFix EcoAs AluStar StarTec Mammut 350 Mammut XT

9 The integral pin allows fast, straightforward attachment of the tie rod fixture to the multi-function profile of the horizontal or vertical wall formwork unit. An automatic anti-disengagement device ensures that the tie rods always remain in the correct position, even when the formwork is moved. i Simply smart Shorter delays while gathering together components Less back-and-forward transportation on site Two tie rods accommodated Fast, straightforward attachment to multi-function profile without tools Product Ref. no. Tie rod fixture

10 Impressive in detail Stop-end systems MEVA offers intelligent stop-end solutions for all slab edge and slab cantilever details encountered on site. Brace brackets safe even on sloped slabs The easy-to-use brace brackets are available in two sizes. The brace bracket SK 80 allows the formation of stop-ends up to a height of 80 cm. The brace bracket SK 150 is used for ground slab stop-ends with a thickness of up to 150 cm. Both models allow continuous adjustment for inclinations of up to 15, making them suitable for use on sloped slabs. The brackets can be folded up for space-efficient storage and easy transportation.

11 i Simply smart All-in-one solution Convenient accessories Easy handling Absolute reliability Stop-end bracket and stop-end rail combinable with guard-railing post and safety mesh Safe and easy-to-use Stop-end bracket for slab cantilevers Stop-end brackets simplify and speed up the construction of cantilever slabs up to 40 cm thick with a cantilever length of 50 cm. The brackets allow continuous height adjustment to ensure reliable positioning of the stop-end form. The slab edges are then formed with MEVA formwork panels, 3S plywood, alkus facings (see above) or planks. Stop-end rail for vertical slab edge stop-end formwork The stop-end rail (with anchor sleeve and anchor DW 15) offers a fast and cost-effective solution for forming the edges of all suspended slabs up to 60 cm thick. It can be used in conjunction with guard-railing posts, safety mesh or both, which simply push-fit into the rail. Products Ref. no. Stop-end rail MFS Stop-end bracket MFS Slab edge bracket Stop-end spindle MFS DW Trestle for beams 40/ Brace bracket SK Brace bracket

12 Safety first Tilting support Efficient, lightweight fall protection MEVA's robust tilting supports allow cost-effective mounting of fall protection safeguards on the opposite formwork in cases where working scaffolds are only installed on a single formwork side. For crane installation and to widen access for concreting, the guard railing can be tilted outwards by up to 15. The tilting supports can be attached to horizontal and vertical wall formwork panels and are easily locked in position with the integral horizontal wedge. Safe and stable The permissible span of the safety mesh is 2.50 m under EN 13374, Class A (q = 0.6 kn/m²). More space needed for pours? No problem: by adjusting the wedge, the tilting support can be inclined by up to 15.

13 i Simply smart Stable construction Captive components Fast and easy to install with a long service life Practical: the tilting supports are attached to the formwork profile with the captive wedge. The reliable socket system for all MEVA guard-railing posts, e.g. the MEVA safety mesh, is tested to EN 13374, Class A. Tilting support 23 The tilting support 23 is specially designed for the AluFix and EcoAs systems. In conjunction with the MEVA guard- railing posts and safety mesh, it provides a fall protection safeguard tested to EN 13374, Class A. Products Ref. no. Tilting bracket 40/ Tilting bracket Safety mesh 1100/ Safety mesh 600/ For use in conjunction with all MEVA guardrailing posts Guard-railing post Guard-railing post Guard-railing post 48/120 (UK) Guard-railing post 48/ MEVA guard-railing posts with toe-board supports offer the ideal mounting for all types of safety mesh.

14 Rock-solid reliability Shoe universal MFS A sound foundation As fall protection systems are only ever as good as their supporting construction, a sound base connection is essential. In conjunction with the MEVA guarding-rail posts and safety mesh, the shoe universal MFS ensures dependable all-round fall protection. A secure construction is achieved through use of the tried and tested spiral anchor DW 15/100 or the quick anchor DW 15, attached with a flange screw 12. i Simply smart Stable construction to EN Safer and quicker to install than timber assemblies No tools needed Lower material costs Durable hot-dip galvanised steel assembly Products Ref. no. Shoe universal MFS Flange screw Safety mesh 1100/ For use in conjunction with all MEVA guard-railing posts Guard-railing post Guard-railing post Guard-railing post 48/ (UK) Guard-railing post 48/

15 Flexible and economical 3S plywood Dimensionally stable The adhesive-bonded, 21 or 27 mm thick three-ply facing is melamine-coated with all edges sealed. 21 mm panel: 10.0 kg/m² Flexural rigidity: 40 N/mm² 27 mm panel: 12.5 kg/m² Flexural rigidity: 35 N/mm² No chipping on long edges Edges with water-repellent seal and coating Melamine coating: 130 g/m² Elastic modulus (mean): 10,000 N/mm² Robust and impregnated H20 beams High load capacity The H20 beams can be flexibly used as longitudinal or transverse members. Thanks to their 3S solid webs, they can be cut to any size and supported as required. They have a selfweight of only 4.6 kg/m. Plastic caps for impact protection 3-ply solid timber to EN 13353, face and core layers made from bonded strips with largely vertical annual rings Wood moisture content: 12 % +/- 3 % Strength-graded, Class S10 to DIN 4074 Web-milling on the opposing side of the core (left-sided chord surface) Impregnated with waterproof colour glaze Intelligent accessories: The connector clip H20 ensures a fast, reliable, material-efficient connection for H20 beams without nails. Forked prop head H20 Products Ref. no. Forked prop head H Beam clamp H Connector clip H Beam clamp H20

16 Strong and sturdy EuMax props Extension lengths of 98 cm 550 cm EuMax is the high-performance, all-round, all-purpose prop range. Provided with a high-grade galvanised finish, the props offer a combination of high flexibility and type-tested safety, with production certified to DIN ISO The permissible load capacity is 20 kn for Class D props at all extensions and 30 kn for Class E props. The two prop classes (D and E) are easily distinguishable in the stacking racks by means of their differently shaped base plates. Props Class D Extension length [cm] Max. load capacity up to extension* Ref. no. 20/ kn / 200 cm / kn / 340 cm / kn / 450 cm Props Class E Extension length [cm] Max. load capacity up to extension* Ref. no. 30/ kn / 150 cm / kn / 250 cm / kn / 290 cm / kn / 420 cm * According to type-tested structural design

17 i Simply smart Hand injury protection as internal tube still projects by 10 cm in retracted position Self-cleaning external thread Large range for fine adjustment Cast-iron setting ring (nut) Internal tube protected from sliding out Products Ref. no. Tripod Tripod The tripod is used to stabilise props. The rotating legs allow the tripod to be positioned in open spaces, directly along walls and in corners.

18 Pioneer and trendsetter More with MEVA Formwork. Simple. Smart. A lot of things that are now considered to be standard in the formwork industry were developed by MEVA in Haiterbach. As a trendsetter for the entire industry, we work day in and day out with great élan to make formwork even safer, more efficient and easier to use for the end user. For us, the excellent quality of our products and technology is a matter of course. We are independent, family-run and committed to the values of a medium-sized company in everything we do. That is why our customers may rightly expect not only technologically superior products but also comprehensive, personal commitment to projects all around the world. Complex special formwork or economical standard formwork: Our experience and wide range of products make us a service partner with strong consulting skills, even for the sophisticated challenges construction professionals have to master nowadays.

19

20 You can rely on us wherever you are. With 40 offices on 5 continents, we are on the spot wherever you need us. Headquarters (Germany) MEVA Schalungs-Systeme GmbH Industriestrasse 5 D Haiterbach Tel Fax info@meva.net Berlin Tel Dresden Tel München Tel Nord Tel Rhein/Ruhr Tel Rhld-Pfalz/Saar Tel Stuttgart Tel Subsidiaries/international bases A-Pfaffstätten, Tel AUS-Adelaide, Tel Benelux, Gouda, Tel BH-Riffa, Tel CDN-Toronto, Tel CH Seon, Tel CO-Bogotá, Tel DK-Køge, Tel F Sarreguemines, Tel GB Tamworth, Tel H Budapest, Tel IND-Mumbai, Tel MA-Casablanca, Tel MAL-Perak, Tel N-Oslo, Tel PA-Panama City, Tel PH-Manila, Tel QA-Doha, Tel SA-Dammam, Tel SGP-Singapore, Tel UAE Dubai, Tel USA Springfield, Tel MEVA Schalungs-Systeme GmbH Industriestrasse Haiterbach Germany Tel Fax info@meva.net GB 6/18 PoD, Printed in Germany