INLINE TIMBER PRODUCT GUIDE. p13

Transcription

1 PRODUCT GUIDE p13

2 FINISHED PRODUCT The Inline Timber pre-formed shower base has been developed specifically to allow the installation of a wetroom on a timber floor. Available in a range of sizes, the former has a built-in gradient ensuring that water from the shower is directed towards the integral linear drain, giving a sleek and stylish finish. The key feature of the Inline Timber is its two way fall which allows the tiling to be laid without diagonal cuts, therefore making it ideal for use with large format tiles. The integrated linear drain is available with one or two traps and a choice of stylish grill finishes. KEY FEATURES Designed for timber floors Two way fall - suited to large format tiles 9 pre-formed sizes Trimmable 10 year guarantee Stylish linear drain Variable waste position Flow rate up to 40 L/min Height adjustable grill p1

3 FORMER TRAP The Inline Timber floor former is manufactured using a highdensity XPS foam with a mineral coating on both sides, making them both lightweight and easy to handle, whilst maintaining good thermal properties and compressive strength. The former has a pre-formed 12mm fall, providing a consistent two way gradient every time. The clever design allows for far higher flow rates than a more traditional four-way fall former whilst the linear drain makes it ideal for the installation of large format tiles Each Inline Timber former is supplied with a stainless steel trim for detailing the difference in tile heights where the former meets the remainder of the bathroom floor - see image for details. FORMER AND STAINLESS STEEL TRIM Designed for timber floors Two way fall - suited to large format tiles Easily trimmed 10 year guarantee Variable trap position 22mm depth STAINLESS STEEL TRIM FLAT WETROOM FLOOR STAINLESS STEEL TRIM The trap has an adjustable ball joint and comes with removable dip-tube. For ease of installation, it can be fitted anywhere within the central section of the trough, making it simple to avoid joists and other such obstructions. NO. OF TRAPS Multi-directional outlet Variable position 50mm water seal 50mm outlet, supplied with 50mm-42mm reducer BS1455/1566 Easy to maintain TRAP SHOWER AREA A single trapped Inline Timber has a flow rate of up to 25 L/ min*. The trap can be fitted anywhere within the trough. ONE TRAP TWO TRAPS SIZES The Inline Timber is available in 9 sizes: 40 A B mm x mm - drain mm x mm - drain mm x mm - drain mm x mm - drain 1500mm x mm - drain 1500mm x mm - drain 1800mm x mm - drain 1800mm x mm - drain mm x mm - drain When a higher flow rate is required a double trap version is available, allowing up to 40 L/min*. * See flow rate chart for full details FLOW RATES No. of wastes No. of traps ST1 MG1 p2 p3

4 GRILL FINISH The grill is available in two different finishes. Both are manufactured in 316 marine grade stainless steel, ensuring a stunning high quality finish. Type MG1 - Oblong slots: Rows of oblong slots in a grained stainless steel finish. Type ST1 - Stone-infill: Allows a section of tile to be inserted to provide a sleek continuous look. Suitable for 10-12mm stone / porcelain tiles. Bespoke depths available to order. MG1 ST1 PRODUCT DETAILS DRAIN IMAGE DESCRIPTION SIZE POSITION Single trap Inline Timber, supplied with solid grill as standard. Maximum flow rate 25 L/min. mm x mm mm x mm mm x mm mm x mm 1500mm x mm 1500mm x mm 1800mm x mm 1800mm x mm mm x mm HEIGHT ADJUSTMENT The grill is height adjustable in 1mm increments to suit tile thicknesses of 6mm to 20mm. Additional spacers are available upon request for tiles thicker than 20mm. ADJUSTMENT Double trap Inline Timber, supplied with solid grill as standard. Maximum flow rate 40 L/min. mm x mm mm x mm mm x mm mm x mm 1500mm x mm 1500mm x mm 1800mm x mm 1800mm x mm mm x mm HOW TO SPECIFY To specify your Inline Timber, first select the required number of traps (depending on the required flow rate), followed by the grill length and finally the grill finish. Membrane It is essential that the floor is waterproofed or tanked using one of the Majestic Floor and Wall Membranes. For timber floors we would recommend the Majestic Floor Membrane is applied to the entire wetroom floor. Majestic Wall Membrane should then be applied to the walls of the shower area and overlapped onto the Reinforcing Tape. p4 p5

5 IN DETAIL WATERPROOFING FLOOR BUILD UP IMAGE DESCRIPTION Majestic Floor Membrane A superior waterproof membrane designed for use in wetrooms, prior to the application of ceramic tiles and natural stone. Self-adhesive Quick and easy to install 10 year guarantee Majestic Wall Membrane A liquid membrane designed for waterproofing walls, fully compatible with Majestic Floor Membrane. Self-adhesive Quick and easy to install TRAP p6 p7

6 x mm x mm 1800 x mm 1800 x mm x mm x mm x mm x mm 1500 x mm p8 p9

7 Majestic Shower Company Ltd Harlow Office Two North Place Edinburgh Way Harlow, Essex CM20 2SL Telephone: +44 (0) Facsimile: +44 (0) Barnsley Office Unit C, Shortwood Court Shortwood Business Park Barnsley, South Yorkshire S74 9NW Telephone: +44 (0) Facsimile: +44 (0)