isonaturelle %98 is composed of natural elements Provides heat, fire and noise insulation Prevents moisture and must formation Ease of application

Transcription

1

2 isonaturelle isonaturelle is a multipurpose insulation plaster %98 is composed of natural elements Provides heat, fire and noise insulation Prevents moisture and must formation Ease of application Against Cold Against Heat Against Fire Against Must Against Water

3 isonaturelle Classification Conventional Insulation Materials New Generation ThermaI Insulation Plasters EPS Expanded Silicone XPS Rockwool Perlite Based Glasswool Polyurethane Pumice Based

4 isonaturelle Composition Expanded Silicone + White Cement + isonaturelle Polymer + Fibres

5 Benefits Insulation against cold Very easy application Insulation against heat Increases the comfort Fire resistant Environmentally Friendly Composed of natural elements Ultralight Water resistant Crush resistant Insulation against noise Economical

6 Composed of Natural Elements isonaturelle, is a natural and complementary part of the main constructional component; the Wall. Its components are manufactured through the use of high tech. processes and meet the thermal insulation values defined by norms/standards.

7 Enhances Comfort in the Living Space Ensures uninterrupted & continuous thermal insulation, thus it prevents moisture and must formation as well as eliminating sweating created by the condensation inside the building. isonaturelle adds on the comfort in the living spaces. Thermal conductivity of the product remains stable over time.

8 Prevents Must and Moisture isonaturelle is water resistant thus it does not allow water and moisture to form in itself which lets the product maintain its stability over time. When applied on the interior walls, it prevents must and moisture formation.

9 Provides Thermal Insulation isonaturelle has excellent thermal insulation properties providing insulation against both cold and heat. It eliminates thermal loss by forming a complete layer of protection, that does not allow thermal bridges to occur. It reduces the heat loss by upto 50% in buildings applied.

10 Environmentally Friendly An overwhelming majority of its ingredients are natural elements. isonaturelle, does not include any radioactive or carciogenics. It can be recyled. It is harmless to human health.

11 Fireproof, Does not Burn isonaturelle is classified as Class A material since it provides resistance until 600 C against fire according to DIN It is used as a fire barrier in addition to its already existing heat insulation property. It does not emit or radiate poisonous gas or smoke that leads to choking, in the event of fire. It can be used as a fire insulation material through direct application on steel profiles in buildings that rely on steel structure.

12 Enhances Noise Insulation isonaturelle, by means of its spherical structure & porosity, demonstrates superior noise absorbtion properties which provides noise insulation, as well as acoustic comfort in spaces applied.

13 Crush Resistant isonaturelle can be applied as screed/alum on the surface under the roof, or as the alum on the floor, as it has a high compressive strength (28-33 kg/cm). It is highly resistant against crush. The product does not allow cracks to form or shrink or expand after application that stems from sudden changes in the temperature.

14 Ultralight isonaturelle is 6 times lighter than the conventional plaster. It stands as a major advantage, especially because it lowers the dead wieght of the building. It also improves the seismic performance of the building.

15 Easily Painted The finished exterior application becomes ready for painting in under 72 hours at 20 C. Fast finishing characteristic is a major advantage for construction projects that run against time. isonaturelle can be used as it is without any extra protective coating need or paint.

16 Saves Money With isonaturelle, interior and exterior plaster applications are much easier, that generates a higher surface area completion in terms of labour as well as the material used, as the product is applied directly to the surface. Therefore, savings are achieved through the elimination of unnecessary steps both for plaster and for the labor time.

17 Ease of Application isonaturelle can directly be applied to almost all wall materials: Brick BIMS Blocks ( made of pumice ) Ready mix concrete Gas concrete Ceramic Steel. Homogeneous chemistry of the product allows the user easier operational control during application. Labour mistakes can easily be mend. Extra savings from time and labour is possible through machine applications.

18 isonaturelle Product Portfolio

19 Exterior Lightweight Thermal Insulation Plaster Application Temperature Test +5 o C Density EN ± 30 kg/m 3 Compressive Strength EN kg/cm 2 (CS II) Adhesive Strength EN ,5 N/mm 2 Water Absorption EN ,5 kg/m 2 min. 0,5 Vapour Diffusion EN µ Thermal Conductivity EN T1 Incombustibility EN 1745,4,2,2 Class A Value Consumption EN cm 1m 2 3,6 kg ± 8% Packaging 9 kg kraft bag Appearance White powder Shelf Life 12 Months ( Clean & Dry conditions ) Application Procedure Entire bag is poured into a clean container. The powder is blended with 6-7 litres of clean water by using a hand-held blender. The prepared mixture must be applied in 2 hours via steel trowel or plastering machine.

20 Exterior Satin Plaster Application Temperature Test +5 o C Density EN ,100 ± 100 kg/m 3 Compressive Strength EN kg/cm 2 Adhesive Strength EN ,1 N/mm 2 Value Water Absorption EN ,9 kg/m 2 min. 0,5 Vapour Diffusion EN µ Thermal Conductivity EN T2 Incombustibility EN 1745,4,2,2 Class A Consumption EN mm 1m 2 1,1 kg ± 9% Packaging 20 kg kraft bag Appearance White powder Shelf Life 12 Months ( Clean & Dry conditions ) Application Procedure Entire bag is poured into a clean container. The powder is blended with litres of clean water by using a hand-held blender. The prepared mixture must be applied via steel trowel.

21 Interior Lightweight Thermal Insulation Plaster Application Temperature Test +5 o C Density EN ± 30 kg/m 3 Compressive Strength EN kg/cm 2 (CS II) Adhesive Strength EN ,2 N/mm 2 Water Absorption EN ,5 kg/m 2 min. 0,5 Vapour Diffusion EN µ Thermal Conductivity EN T1 Incombustibility EN 1745,4,2,2 Class A Value Consumption EN cm 1m 2 3,6 kg ± 8% Packaging 9 kg kraft bag Appearance White powder Shelf Life 12 Months ( Clean & Dry conditions ) Application Procedure Entire bag is poured into a clean container. The powder is blended with 6-7 litres of clean water by using a hand-held blender. The prepared mixture must be applied in 2 hours via steel trowel or plastering machine.

22 Interior Satin Plaster Application Temperature Test +5 o C Density EN ,100 ± 100 kg/m 3 Compressive Strength EN kg/cm 2 Adhesive Strength EN ,1 N/mm 2 Vapour Diffusion EN µ Thermal Conductivity EN T2 Incombustibility EN 1745,4,2,2 Class A Value Consumption EN mm 1m 2 1,1 kg ± 9% Packaging 20 kg kraft bag Appearance White powder Shelf Life 12 Months ( Clean & Dry conditions ) Application Procedure Entire bag is poured into a clean container. The powder is blended with litres of clean water by using a hand-held blender. The prepared mixture must be applied via steel trowel.

23 Lightweight Alum I Application Temperature LIGHTWEIGHT ALUM I Test +5 o C Density EN kg/m 3 ± %10 Compressive Strength EN N/mm 2 ( CS I ) Flexural Strength EN ,5 N/mm 2 Water Absorption EN ,2 kg/m 2 min. 0,5 Vapour Diffusion EN µ Thermal Conductivity EN T2 Incombustibility EN 1745,4,2,2 Class A Consumption EN cm 1m 2 6 kg ± %10 Value Packaging 100 lt, 1 m 3 bag Appearance White powder Shelf Life 12 Months ( Clean & Dry conditions ) Application surface is cleaned from dust. Application Procedure Separators are placed on the surface and the prepared mixture is applied. The procedure is completed after flattening via thickness gauge

24 Lightweight Alum II Application Temperature LIGHTWEIGHT ALUM II Test +5 o C Density EN ,000 kg/m 3 ± %10 Compressive Strength EN N/mm 2 ( CS II ) Flexural Strength EN N/mm 2 Water Absorption EN ,4 kg/m 2 min. 0,5 Vapour Diffusion EN µ Thermal Conductivity EN T2 Incombustibility EN 1745,4,2,2 Class A Consumption EN cm 1m 2 10 kg ± %10 Value Packaging 100 lt, 1 m 3 bag Appearance Creamy White powder Shelf Life 12 Months ( Clean & Dry conditions ) Application surface is cleaned from dust. Application Procedure Separators are placed on the surface and the prepared mixture ispoured. The procedure is completed after flattening via thickness gauge

25 Areas of Application External Wall Insulation Polystyrene EPS XPS Rockwool isonaturelle Lightweight Exterior Thermal Insulation Plaster

26 Areas of Application Internal Wall Insulation Gyps Plaster Conventional Plaster isonaturelle Lightweight Interior Thermal Insulation Plaster

27 Exterior Comparison

28 Polystyrene burns emits poisonous gas isonaturelle Incombustible does not emit poisonous gas isonaturelle XPS

29 isonaturelle is breathable

30 Thermal Conductivity & Thermal Resistance Values Thickness Thermal Conductivity cm λ R Value 1 0,06 0,17 2 0,06 0,33 3 0,06 0,50 4 0,06 0,67 5 0,06 0,83 6 0,06 1,00 7 0,06 1,17 8 0,06 1,33

31 Sound Absorption Values isonaturelle Sound Absorption 500 Hz Thickness cm 7 1,5 11 2,0 15 3,0 17 4,0

32 Interior Comparison

33 Interior - Comparison Gyps Plaster isonaturelle Consumption ( for 1 m 2 & 1 cm thickness ) kg 3,6 kg Thermal Insulation No Yes Water Repellency No Yes Must, Moisture Prevention No Yes Sound Insulation No Yes Protection against Fire No Yes Application on Concrete Application on Cellular Concrete Requires Adhesive Direct Application Requires Adhesive Direct Application Application via machine Yes Yes Average Surface of Application Man/Day 20 m2 35 m2

34 Application

35 Application Guide isonaturelle is packed in 9 kg kraft bags Approximately 3,6 kg isonaturelle, is used to complete 1 m 2 surface with a thickness of 1 cm Can be applied upto 3 cm on almost all surfaces in a single time Proper lathes are placed in acoordance with the target thickness level Entire pack is emptied in a usually plastic bowl 6-7 litres of water is poured and stirred with a hand held/manually operated mixer for 2-3 minutes Application is done via steel trowel, manually

36 Application Guide No other substance should be added isonaturelle can be applied in all weather conditions under which conventional plaster is applied isonaturelle can also be applied by the use of plaster/gyps pumps. In exterior applications, the surface becomes ready for paint 4-5 days after application

37 Application isonaturelle can be applied by PFT-4 - PFT-5 Plaster /Gyps Pumps or machines specifically made for lightweight plasters m2 /day can be completed by 4 workers

38 Sample Projects

39 İstanbul Taksim Radisson Blu Hotel

40 Muğla Bodrum Mandalin Villas

41 MOLDOVA

42 Spine Tower Maslak, Istanbul

43 Çanakkale 18 Mart University - Dormitories

44 Certificates The product features and quality standarts of isonaturelle are certificated by Istanbul Technical University reports, Iso certificates, CE Documents and GOST-R Certificates