Salita Estate - Masterplan. Retaining wall. Stage 4. Stage 1. 2m Estate boundary wall Feature fencing by developer BAL Rating (Refer to detail)

Transcription

1 N Salita Estate - Masterplan VERIS (08) Stage 1 Stage 4 Retaining wall OUR REF: August 2017 All dimensions and areas are subject to survey. The particulars on this brochure are supplied for information only and should not be taken as a representation in any respect on the part of the vendor or its agent. Stage 2 Stage 3 salitaestate.com.au Existing residential 2m Estate boundary wall Feature fencing by developer BAL Rating (Refer to detail)

2 Salita Estate - Stage 1 Lots for sale Existing residential Future residential Retaining wall 2m Estate boundary wall Feature fencing by developer BAL Rating (Refer to detail) salitaestate.com.au N VERIS (08) OUR REF: August 2017 All dimensions and areas are subject to survey. The particulars on this brochure are supplied for information only and should not be taken as a representation in any respect on the part of the vendor or its agent.

3 Salita Estate - Stage 2 Lots for sale Existing residential Future residential Retaining wall 2m Estate boundary wall Feature fencing by developer BAL Rating (Refer to detail) salitaestate.com.au N VERIS (08) OUR REF: August 2017 All dimensions and areas are subject to survey. The particulars on this brochure are supplied for information only and should not be taken as a representation in any respect on the part of the vendor or its agent.

4 0 SALITA ESTATE DESIGN GUIDELINES 2017

5 Salita Estate Design Guidelines 2017 Salita Estate takes great pride in the overall design and streetscape outcomes for the benefit of all residents. These Design Guidelines give residents confidence in knowing that there is a quality for all homes and landscaping in the estate that aims to ensure the standards of Salita Estate are achieved. This is a protection of personal investment and community outcomes for all through delivery of high quality design outcomes. How to use this document Before designing your home and choosing your colour schemes, please read through this design guideline document with your chosen designer or builder to ensure the design, materials and colour requirements are achieved in your final house design. Bold text in these guidelines indicates a definition has been provided, refer to page 6 Where definitions are not provided in this document the definition in the current Residential Design Codes will apply. Further provisions of the Residential Design Codes or other Statutory Planning Document may apply in addition to these requirements. All are subject to the interpretation and approval of relevant statutory authorities. Application Process 1. Read through the Salita Estate Design Guidelines 2. Discuss your home design with your builder 3. Select your home design and colours as per Design Guidelines 6. Submit your approved plans to City of Wanneroo and obtain building approval 5. Obtain Developer approval 4. Submit your building plans and Colours & Materials Schedule for Developer approval 7. Build your home in accordance with the approved designs 1 SALITA ESTATE DESIGN GUIDELINES 2017

6 Elevations On Primary Street elevations, all the following will apply: Provide a minimum of 450mm of wall and corresponding roof articulation excluding any garage/store. Provide a minimum of three separate wall colours / materials (minimum 10% for each) combining a minimum of two different materials (e.g. two different painted render colours plus a feature material such as timber cladding, feature brick, wall tiling, or stone cladding). Excluding the garage or store, a greater portion of the overhanging eaves shall be at a minimum course height of 28c. Overhanging verges to gables in lieu of eaves are acceptable (excludes gambrels). To create interest and shadow lines, where provided eaves and verges shall have a minimum wall overhang of 300mm. On Public Open Space elevations, all the following will apply: Provide a minimum of 450mm of wall and corresponding roof articulation excluding any garage/store. For front elevations provide a minimum of three separate wall colours / materials (minimum 10% for each) combining a minimum of two different materials (e.g. two different painted render colours plus a feature material such as timber cladding, feature brick, wall tiling, stone cladding). For side or rear elevations provide a minimum of two separate wall materials (minimum 20% for each). A portion of the overhanging eaves shall be at a minimum course height of 28c. Overhanging verges to gables in lieu of eaves are acceptable (excludes gambrels). To create interest and shadow lines, where provided eaves and verges shall have a minimum wall overhang of 300mm. For Corner Lots, the following will apply: At least two of the colours / materials from the front elevation must return on secondary street elevations a minimum of 1.5m or to the wing fence location, whichever is greater. Provide at least one major window opening that has a clear view of the secondary street setback area, i.e. forward of any return fencing. 2 SALITA ESTATE DESIGN GUIDELINES 2017

7 Salita Approved Examples Salita Rejected Example 3 SALITA ESTATE DESIGN GUIDELINES 2017

8 Colours and Materials There are no specified wall and roof colour palettes for homes in Salita Estate, however bright or primary colours are not permitted. The Colours and Materials Schedule for submission can be found on page 7. Roof Form For the roof, all the following will apply: Pitched roofs are to be a minimum of 25. Skillion roofs are to be at a minimum of 8 and, in all cases, have a minimum 300mm wall overhang. Small areas of flat roof are permitted where concealed from public view by a parapet wall or similar. Vehicle Parking and Storage Areas For garaging, stores and the like on primary and secondary streets, the following will apply: Garage street setback to be a minimum of 0.5m behind a street front habitable room wall containing a window. Excluding lots: 9, 59 and 60 (front loaded), 69 and 70 (rear loaded). Garages to be fully enclosed on all sides visible from the street frontage(s). Garages to match the construction and materials of the associated dwelling. Garages/stores and the like to have stepped front walls and roof (approx. 1.0m) where the overall width (piers and door) exceeds 6.5m i.e. triple garages, garages with storerooms. Lots 8, 9, 10, 56, 59, 60, 71, 81, 82 and 83 have Designated Garage locations as shown on the Individual Lot Plans in the Land Sales Contract. A dedicated refuse bin storage area must be provided concealed from street view. This can be within the garage provided that the minimum internal garage dimension required is maintained. 4 SALITA ESTATE DESIGN GUIDELINES 2017

9 Fencing For fencing on primary streets, all the following will apply: No fencing to the primary street boundary line or truncation where applicable, unless installed by the developer. Dividing boundary fencing if required may extend forward from the wing fence up to a line 3m back from the front boundary at a maximum height of 0.9m. Where front fencing has been installed by the developer, the dividing fencing may join with the front fencing. Wing fencing to be set behind the nearest corner of the dwelling by a minimum of 1.5m and at a maximum height of 1.8m. Wing fencing greater than 4m wide to be constructed of materials to compliment the house with 50% visually permeable infills 0.9m above ground level to a maximum height of 1.8m above ground level. For fencing on secondary streets, all the following will apply: No fencing to the secondary street boundary forward of the wing fence, unless installed by the developer. Fencing to a maximum height of 1.8m for the remainder of the secondary street boundary can be installed. Wing fencing to be set behind the nearest front corner of the dwelling by a minimum of 1.5m and at a maximum height of 1.8m. 5 SALITA ESTATE DESIGN GUIDELINES 2017

10 Definitions Corner Lot A lot with more than one intersecting street or P.O.S. boundary. Course Height A height measured in standard 1c bricks above internal general slab datum level of 0c and not any sunken areas. Designated Garage The location of the garage for selected lots is pre-determined based on streetscape, sightlines and adjoining lots. Dividing Boundary Fence The fence on a cadastral boundary between two adjoining lots. Eaves A roof overhang that provides shading to a wall face. Elevation An external wall of any part of a dwelling facing a lot boundary. Flat Roof Any roof less than an 8 pitch. Gable A vertical wall, triangular in form, extending to the ridge of a roof. Gablet or Gambrel A small gable set on top of a roof not connected to a wall below. Habitable Room All living rooms, kitchens, bedrooms, activity rooms and studies. Lot Truncation One or more portions of a street front boundary at the intersection of two streets or P.O.S./street alignments. Opinion of the Developer Entirely at their discretion, the considered opinion of the developer or their appointed agents. Primary Street (for the purposes of these design guidelines) A frontage containing the designated pedestrian access point to the dwelling or a frontage containing both the vehicular access and pedestrian access point to the dwelling. Public Open Space Frontage Either a front or side lot boundary directly adjoining public open space. Secondary Street A street not providing the pedestrian access point to the dwelling. Street Setback A horizontal distance between the street alignment and a building, measured at right angles to the street alignment. 25 A roof pitch of 24 degrees 43 minutes or greater. Verge A roof overhand to a gable or wall. Wing fence A fence connecting the side of a dwelling to either side boundary, boundary structure or boundary fence. 6 SALITA ESTATE DESIGN GUIDELINES 2017

11 Salita Estate Colours and Materials Schedule Lot No: Owner: Street: Builder: Roof Supplier/Type Required Colour Colorbond N/A Tiles Elevations Material 1 Material 2 Material 3 Other Material (if applicable) Garage NOTE: This Schedule is required to be completed in full and ed with your building plans for Developer Approval assessment to admin@salitaestate.com.au 7 SALITA ESTATE DESIGN GUIDELINES 2017