2002 Bachelor of Science, Civil & Environmental Engineering University of Michigan

Size: px
Start display at page:

Download "2002 Bachelor of Science, Civil & Environmental Engineering University of Michigan"

Transcription

1 ENGINEER: STRUCTURAL, CIVIL AARON J.M. GILL, P.E. Engineering Design & Testing Corp. Post Office Box 320 Windsor, Connecticut Telephone: (860) EDUCATION: 2002 Bachelor of Science, Civil & Environmental Engineering University of Michigan EXPERIENCE: August 2008 to Present Engineering Design & Testing Corp. Windsor, Connecticut Consulting Engineer. Study, interpretation, and resolution of civil engineering-related incidents, including damage assessment, scope evaluation and root cause of incidents involving residential, commercial, industrial and institutional buildings. Origin and cause of collapsed structures; wind, flood, fire, hail and settlement evaluation; construction related accidents; repair or replace cost estimation. December 2007 to July 2008 Silverback Properties, LLC Property Management Specialist. Engineering and economic analysis of proposed residential and commercial development projects to determine project feasibility. Facilitated development meetings with city, county and state officials pertaining to building and construction codes. Managed existing properties to maintain site quality and customer satisfaction. Structural evaluation of existing, vacant structures proposed for reuse. July 2002 to November 2006 Fishbeck, Thompson, Carr, & Huber, Inc. Civil & Environmental Engineer. Designed and managed the construction of a variety of civil engineering projects, including forcemain, stormsewer, detention basins, pedestrian pathway, sanitary sewer, and site plan. Developed storm water discharge compliance program, including training, testing and reporting to meet state and federal requirements. Reviewed development site plans for municipality ordinance compliance. Assured construction quality including location, material and quantity as on-site field inspector.

2 CURRICULUM VITAE: AARON J.M. GILL, P.E. PAGE 2 OF 6 May 2001 to September 2001 Fishbeck, Thompson, Carr, & Huber, Inc. Field Inspector. Assured construction quality of all material placed by onsite contractors. Documented, with field measurements, location of all material placed. Acted as liaison between design engineers and on-site construction personnel. Maintained progress reports for contractor payments and schedule adherence. Handled all issues pertaining to residents affected by construction activities. May 2000 to September 2000 Fishbeck, Thompson, Carr, & Huber, Inc. Field Inspector. Assured construction quality of all material placed by onsite contractors. Documented, with field measurements, location of all material placed. Acted as liaison between design engineers and on-site construction personnel. Maintained progress reports for contractor payments and schedule adherence. Handled all issues pertaining to residents affected by construction activities. May 1999 to August 1999 Steelcase Inc. Industrial & Operational Engineering Intern. Developed ways to improve process flow through the product distribution center. Designed product accessories to reduce merchandise damage during transport from production lines to the customer. May 1998 to August 1998 Steelcase Inc. Test Engineer Intern. Designed and conducted tests to determine the durability and safety of existing and new products. Assembled national building and electrical codes to ensure developing products met current safety regulations. June 1997 to August 1997 Steelcase Inc. Model Maker Intern. Built scale model of model shop used to redesign the existing floor plan and increase worker efficiency. Designed and built models of new products for product engineers.

3 CURRICULUM VITAE: AARON J.M. GILL, P.E. PAGE 3 OF 6 REGISTRATIONS: National Council of Examiners for Engineering and Surveying (NCEES 36160) Registered Professional Engineer in Connecticut (#26678) Registered Professional Engineer in Arkansas (#16358) Registered Professional Engineer in Florida (#78157) Registered Professional Engineer in Maine (#11835) Registered Professional Engineer in Maryland (#40052) Registered Professional Engineer in Massachusetts (#47988) Registered Professional Engineer in Michigan (#53557) Registered Professional Engineer in New Hampshire (#12717) Registered Professional Engineer in New Jersey (#47985) Registered Professional Engineer in New York (# ) Registered Professional Engineer in Ohio (#75105) Registered Professional Engineer in Rhode Island (#9179) Registered Professional Engineer in Vermont (#5164) PROFESSIONAL ORGANIZATIONS: American Society of Civil Engineers (ASCE) National Roofing Contractors Association (NRCA) LANGUAGES: English Native Spanish Intermediate CONTINUING EDUCATION: Structural Condition Assessment of Existing Structures, sponsored by ACSE, September 2008 Composition and Wood Roofs Damage Assessment, sponsored by Haag Engineering, October 2008 Commercial Roofs Damage Assessment, sponsored by Haag Engineering, October 2008 Confined Space Training, sponsored by National Safety Council, November 2008 IBC Wood Framing, sponsored by Colorado Chapter ICC Educational Institute, March 2009

4 CURRICULUM VITAE: AARON J.M. GILL, P.E. PAGE 4 OF 6 Advanced Design of Wood Frame Buildings, sponsored by Colorado Chapter ICC Educational Institute, March 2009 High Wind Wood Frame Design & Construction sponsored by Colorado Chapter ICC Educational Institute, March 2009 Advanced Design Topics in Wood Construction Engineering, sponsored by Virginia Polytechnic Institute and State University, May 2011 Effective Steel Design: Step-by-Step Design for Commercial and Industrial Buildings, sponsored by American Institute of Steel Construction, May 2011 Learning from Failures of Wood-Framed Structures, sponsored by American Society of Civil Engineers, August 2011 Renovation of Wood Trusses, sponsored by American Society of Civil Engineers, July 2012 Introduction to Structural Design of Wood Buildings per the 2012 NDS, sponsored by Virginia Polytechnic Institute and State University, October 2012 The Master s Guide to Designing Spray Foam Insulation Projects & Installing Them Right, sponsored by Northeast Sustainable Energy Association, March 2013 Roof Failure Due to Snow Loading Southern New England Case Study, sponsored by American Society of Civil Engineers, April 2013 Post-Flood and Wind Safety Evaluations of Buildings, sponsored by Applied Technology Council, July 2013 Lessons from Failures of Building Envelope, sponsored by American Society of Civil Engineers, August 2013 Strengthening Wood Beams and Joists, sponsored by American Society of Civil Engineers, October 2013 Design of Buildings for Coastal Flooding, sponsored by American Society of Civil Engineers, November 2013 Corrective Work in Steel Structures, sponsored by American Society of Civil Engineers, January 2014 Roofing Systems: A Primer for Engineers, sponsored by American Society of Civil Engineers, January 2014

5 CURRICULUM VITAE: AARON J.M. GILL, P.E. PAGE 5 OF 6 Design Loads for Complex Residential Roofs, sponsored by American Society of Civil Engineers, March 2014 Avoiding Failures of Retaining Walls, sponsored by American Society of Civil Engineers, May 2014 ACI 332 Residential Cast-In-Place Concrete, sponsored by American Concrete Institute, June 2014 ASCE 7-10 Snow Load Provisions, sponsored by American Society of Civil Engineers, June 2014 Bus Rapid Transit A Viable Alternative Part I of III, sponsored by American Society of Civil Engineers, December 2014 Bus Rapid Transit A Viable Alternative Part II of III, sponsored by American Society of Civil Engineers, December 2014 Bus Rapid Transit A Viable Alternative Part III of III, sponsored by American Society of Civil Engineers, December 2014 The Role of the Specialty Engineer (From the Wood Truss Industry s Perspective), sponsored by American Society of Civil Engineers, January 2015 Industrial Buildings Design and Renovation, sponsored by American Society of Civil Engineers, September 2015 Structural Building Condition Surveys: Looking for Trouble, sponsored by American Society of Civil Engineers, December 2015 A Closer Look At Road Diets, sponsored by American Society of Civil Engineers, December 2015 Structural Design of Steel Stairs and Rails, sponsored by American Society of Civil Engineers, January 2016 Engineering Mid-Rise Buildings of Wood Construction, sponsored by American Society of Civil Engineers, February 2016 Philosophy of Structural Building Codes, sponsored by American Society of Civil Engineers, March 2016 Diagnosis, Repair, and Restoration of Building Facades, sponsored by American Society of Civil Engineers, March 2016

6 CURRICULUM VITAE: AARON J.M. GILL, P.E. PAGE 6 OF 6 Design of Lateral Load Resisting Systems in Masonry Buildings, sponsored by American Society of Civil Engineers, March International Building Code, sponsored by HalfMoon Education Inc., April 2016 Wind-uplift Testing and Liability, sponsored by National Roofing Contractors Association, May 2016 Renovation of Slabs on Grade, sponsored by American Society of Civil Engineers, May 2016 Practical Design of Slabs on Grade, sponsored by American Society of Civil Engineers, August 2016 High-Performance Wood Structures: As Example of Increased Efficiency in Multi-Family Construction, sponsored by Wood Products Council, October 2016 Septic System Design, sponsored by SunCam Continuing Education, March 2017 Design and Construction of Low-Rise Buildings for High Winds and Hurricanes, sponsored by American Society of Civil Engineers, March 2017 Water Management in Shower Installations, sponsored by Hanley Wood University, March 2017 Evaluating and Rehabilitating Foundations and Retaining Walls: Science, Materials, and Techniques, sponsored by HalfMoon Education Inc., April 2017 Building Codes Why They Matter, sponsored by FEMA, July 2017 Code Compliant Fire-Resistance Design for Wood Construction, sponsored by Wood Products Council, October 2017 Introduction to 2015 International Existing Building Code, sponsored by American Society of Civil Engineers, February 2018 PUBLICATIONS: Gill, A.J.M., and Kirchmer, K. L. Settlement, The Stress Point, Volume 22, Number 2, Engineering Design and Testing Corporation, Columbia, South Carolina, June 2009.