BDT Product Sales & Support (951) (800)

Transcription

1 uthorized Distributor

2 Walkways in a Whole New Light rchitectural bollards like our ria,catalina and Torneo bollards, purposefully match Visionaire Lighting s architectural rea fixtures;to unify the look of any project design package. Contemporary bollards like the Ocean Walk, Endurascape, and Pavilion, compliment any landscape design. Introducing the new Cross ow LED rchitectural LED Luminaire and ollard Series The new Cross ow ollard and rchitectural LED Luminaire Series is totally new to the market place. The ollard series is available with 16 or 32 LEDs, and a 36 or 48, 4 square pole.. The rchitectural LED Luminaire Series is available with 32 or 64 LEDs; and a 9, 10, or 11 foot, 4 square pole. The separate driver housing allows for cooler operation and longer life of the driver. The ollard dvantages LED and compact sources are now available in all of our bollards and can make your project green by reducing energy and lamp replacement costs, and cutting down on land fill waste. New, efficient LED optics make bollards more effective for all walkway applications. uthorized Distributor

3 V-ollard LED C C OLLRDS Fixture C Max. LEDs Lbs VL-1 Single VL-1 Double The new V-ollard LED Series continues the unique contemporary design inspired by the sleek styling of the V Collection. Separating the Driver(s) from the individual cast aluminum LED engines: optimize the life of the LEDs and the Driver(s); and maximizes the lumen output of the fixture. The LED light assemblies come in multiples of 16, 32 or 48 LEDs; and are offered in up to 96 LED s. Six optical distribution patterns are available. Choose between 4000 or 5000 Kelvin temperature of the LED s. durable polyester powdercoat finish is guaranteed for five years; and is available in standard or custom colors. The V-ollard LED series is an exceptional choice for low level or pedestrian scale lighting applications. Model Height Optics Source Config. Current Kelvin Voltage Mounting Finish Options Type I Single ronze utton Type Photocell VL-1 3 FT. # of LEDs m 4000K nchor ase *Neutral white (NCHOR OLT (Z) *Specify (T1) 16 (S) 350 (4K) KIT SUPPLIED) (PC120) (PC208) (16LC) () (PC240) (PC277) 4 FT. *Not vailable lack in double (4) configuration (K) Type II (T2) Type III (T3) Type IV (T4) Type V (T5) Type V-W (T5W) 32 (32LC) 48 (48LC) 64 (64LC) 96 (96LC) Double (D) 530 (5) 700 (7) 1000* (10) *1000m not available for 48LC single or 96LC double 5000K *Cool white (5K) Smooth lack (SK) Smooth (SWH) Graphite (GP) 0-10v Dimming Driver No Controls (DIM) For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC. ny use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 140 uthorized Distributor

4 V-ollard LED Housing Cast aluminum LED housing with integral cooling fins for thermal management. The 4 extruded pole contains the driver(s), allowing for cooler operation and longer life. Silicone gasketing is utilized throughout the fixture for weather tight operation. Thermal Management The V-ollard Series provides excellent overall thermal management by maximizing the fixture s heat sink capabilities. This enables the V-ollard Series to withstand higher ambient temperatures and drive currents without degrading LED life. The V-ollard Series has a very low thermal resistance rating. The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The V-ollard Series LEDs have been determined to last a minimum of 100,000 hours in 25 C environments when driven at 350 m. Optical System The highest lumen output, Evo/C LEDs are utilized in the V-ollard Series. IES distribution Types I, II, III, IV, V and V-W are available. LED light assemblies come in multiples of 16 LEDs. The optical system qualifies as IES full cutoff; and is Dark-Sky friendly to restrict light trespass, glare and light pollution. CRI values are 70 for 4000K and 75 for 5000K. Quali-Guard Finish The finish is a Quali-Guard textured, chemically pretreated through a multiple-stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5 millimeter thickness. Finish is oven-baked at 400º F to promote maximum adherence and finish hardness. ll finishes are available in standard and custom colors. Finish is guaranteed for five (5) years Mounting The V-ollard Luminaire is easily attached to the pole by 2 tamper-proof countersunk screws. Electrical ssembly The V-ollard LED series is supplied with a choice of 350, 530, 700 or 1000 m high-performance LED drivers that accept 120v, 50 Hz to 60 Hz, input. Power factor of 90%. Rated for -40 C operations. 10 kv surge protector supplied as standard. Warranty Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. Options utton Type Photocell 0-10v Dimming Driver Listings Powder Coated Tough. OLLRDS Number of Sides # of LEDs V-ollard Lumen 5K Data m TYPE 1 TYPE 2 TYPE 3 TYPE 4 TYPE 5 TYPE 5W WTTGE VL VL VL Visit for up-to-the-minute chart information, including types not listed here. * For 4000K multiply values by Rancho Way Rancho Dominguez, C Tel: (310) Fax: (310) uthorized Distributor

5 Cross ow LED C D 4 OLLRDS Fixture C D Max. Watts Lbs C-ow ½ 4 3¼ 118W 16 The new Cross ow LED Series continues the unique contemporary design inspired by the sleek styling of the OW family. Separating the Driver(s) from the individual die-cast aluminum linear LED engines: optimize the life of the LEDs and the Driver(s); and maximizes the lumen output of the fixture. The LED light assemblies come in multiples of 16 LEDs; and are offered in up to 32 LED s. Six optical distribution patterns are available. Choose between 4000 or 5000 Kelvin temperature of the LED s. durable polyester powdercoat finish is guaranteed for five years; and is available in standard or custom colors. The Cross ow LED series is an exceptional choice for low level lighting applications. Model Model Optics Source Current Kelvin Voltage Mounting Finish Options Type I m 4000K C-OW-1 36 nchor ase ronze *Neutral white (NCHOR OLT (T1) 350 (Z) KIT SUPPLIED) (4K) () (PC120) (3.5) Type II (T2) Type III (T3) Type IV (T4) # of LEDs C-OW-1 16 (16LC) *Single 32 (32LC) *Double 530 (5) 700 (7) 1000 (10) 5000K *Cool white (5K) lack (K) Smooth lack (SK) Smooth (SWH) utton Type Photocell *Specify (PC208) (PC240) (PC277) 0-10v Dimming Driver No Controls (DIM) Dual Circuit *Doubles Only (DC) Type V (T5) Type V-W (T5W) Graphite (GP) For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC. ny use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 142 uthorized Distributor

6 Housing The LED light engines are constructed of heavy-duty, die-cast aluminum, with external heat radiating fins. The 4 extruded pole contains the driver(s), allowing for cooler operation and longer life. Silicone gasketing is utilized throughout the fixture for weather tight operation. Thermal Management The Cross ow Series provides excellent overall thermal management by maximizing the fixture s heat sink capabilities. This enables the Cross ow Series to withstand higher ambient temperatures and drive currents without degrading LED life. The Cross OW Series has a very low thermal resistance rating. The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The Cross ow Series LEDs have been determined to last a minimum of 140,000 hours in 25 C environments when driven at 350 m. Optical System The highest lumen output, Evo/C LEDs are utilized in the Cross ow Series. IES distribution Types I, II, III, IV, V and V-W are available. LED light assemblies come in multiples of 16 LEDs. The optical system qualifies as IES full cutoff; and is Dark-Sky certified to restrict light trespass, glare and light pollution. CRI values are 70 for 4000K and 75 for 5000K. Quali-Guard Finish The finish is a Quali-Guard textured, chemically pretreated through a multiple-stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5 mil thickness. Finish is ovenbaked at 400º F to promote maximum adherence and finish hardness. ll finishes are available in standard and custom colors. Finish is guaranteed for five (5) years Mounting The Cross ow Luminaire is easily attached to the pole by 2 tamper-proof countersunk screws. SE DETIL Cross ow LED Electrical ssembly The Cross ow Series is supplied with a choice of 350 to 1000 m highperformance LED drivers that accept 120v thru 347v, 50 Hz to 60 Hz, input. 10 kv surge protector supplied as standard. Warranty Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. Options utton Type Photocell 0-10v Dimming Driver Dual Circuit Listings Cross ow Series is ETL listed, suitable for wet locations. LM79 and LM80 RoHS compliant IP66 rated DLC Listed Powder Coated Tough IP66 DesignLights Consortium (DLC) qualified Product. Some configurations of this product family may not be DesignLights Consortium (DLC) listed, please refer to the DLC qualified products list to confirm listed configurations. LTERNTE VIEW OLLRDS R0.187 ø ø ø6.500 Max. olt Circle ø6.000 Cen. olt Circle ase Template: luminum Shaft 4" Square for 3/8 nchor olts Typical Cross Section: Recommended Footing, however job may require larger footings & rebar. PLTE MUST E FULLY LEVELED ø5.500 Min. olt Circle Min Max TOP OF THE PLTE IS IDENTEFIED Y LRGEST SURFCE Scale: 1: Cross ow 5K Lumen Data # Of Sides # Of LEDs m Type 1 Type 2 Type 3 Type 4 Type 5 Type 5W Wattage Visit for up-to-the-minute chart information, including types not listed here. * For 4000K multiply values by Rancho Way Rancho Dominguez, C Tel: (310) Fax: (310) uthorized Distributor

7 ria LED C D C D OLLRDS E E Fixture C D E Max. LEDs Lbs R ¾ R ½ 44½ 31¾ The ria family of architectural bollards combines contemporary styling with durable, vandal-resistant construction and smooth, low level, 360-degree LED illumination. vailable with cutoff optics, the ria is an excellent choice for walkways, entrances, promenades, plazas, courtyards, driveways and landscaped areas. Choose the low-profile-top R-1, or the dome-top R-2 to create an architecturally pleasing look, perfect for any green application. Lens: Clear, tempered flat glass lens with removable stainless hardware and extruded silicone gasket. Housing: Cast aluminum top housing is 12 in diameter, and supported by two polished aluminum bars. ottom housing is an 8 diameter, extruded aluminum shaft. heavy-duty cast aluminum base plate concealed within the shaft is designed for standard anchor bolt mounting. 3/8 x 12 galvanized anchor bolts provided. option is available. Finish: durable Quali-Guard textured thermoset polyester powder coat is available in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Optics: Visionaire offers Evo/C LED s in Type III and Type V distribution patterns. CRI values are 70 for 4,000K and 75 for 5,500K. Lamp: High-lumen-output, energy efficient LEDs offer a minimum estimated life expectancy of 60,000 hours. Driver: high-performance electronic LED driver operates at 120 thru 480 volts, 50 to 60 Hz, with a 90% power factor; and is rated for -40 o C operation. 10 kv surge protector supplied as standard. Model Optics Source Milliamps Kelvin Voltage Mounting Finish Options R-1 Low Profile R-2 Dome Top Pair with: ria Series rea and Wall Sconce fixtures. Type III (T3) Type V (T5) # of LEDs 20 (20LC) (5) 700 (7) 4000K *Neutral white (4K) 5500K *Cool white (55K) LED Data Chart for 5500K* # LEDs Output m Type 1 Type 3 Type Visit for up-to-the-minute chart information, including types not listed here. * For 4000K multiply values by 0.90 nchor ase () *Optional internal, cast-extruded ronze (Z) Painted ars *Painted same color as housing. ars come standard w/ chrome finish. (P) Vandal-Resistant Hardware (VRH) (VR) For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC. ny use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. lack (K) Soft Gold (SG) ase Template 8" Round ollard Ø 8" 4½" 4½" 4½" Ø 5 " olt Circle 3½" 144 uthorized Distributor

8 ria HID - CF C D C D E E Fixture C D E Max. Watts Lbs R ¾ W 20 R ½ 44½ 31¾ W 21 OLLRDS The ria family of architectural bollards combines contemporary styling with durable, vandal-resistant construction and smooth, low-level, 360-degree symmetrical illumination. vailable with cutoff optics, the ria is an excellent choice for walkways, entrances, promenades, plazas, courtyards, driveways and landscaped areas. Choose the low-profile-top R-1, or the dome-top R-2 to create an architecturally pleasing look. Lens: Clear, tempered flat glass lens with removable stainless hardware and extruded silicone gasket. Housing: Cast aluminum top housing is 12 in diameter, and supported by two polished aluminum bars. ottom housing is an 8 diameter, extruded aluminum shaft. heavy-duty cast aluminum base plate concealed within the shaft is designed for standard anchor bolt mounting. 3/8 x 12 galvanized anchor bolts provided. option is available. Finish: durable Quali-Guard textured thermoset polyester powder coat is available in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Optics: Top of fixture houses a high-performance, multi-faceted, 95% reflectance, anodized aluminum Type III or Type V distribution pattern reflector. Lamp: HID 50 to 100 watts offered in both High Pressure Sodium, and Pulse Start Metal Halide for superior efficiency, lumen maintenance and color rendition. CF 26 to 42 watts in Compact. allast: HID a premium HPF regulating autotransformer, available in High Pressure Sodium or Pulse Start Metal Halide. CF a high-performance electronic transformer that operates at 120 thru 277 volts, 50 to 60 Hz, with a 90% power factor; and is rated for -20 o C operation. Model Optics Wattage Source Voltage Mounting Finish Options R-1 Type III HID PS HPS 120 nchor ase ronze Low Profile (T3) 50 (P) (S) (1) () (Z) (50) R-2 Dome Top Pair with: Type V (T5) 70 (70) 100 (100) Compact * V universal 26 (26DT) 32 (32TT) 42 (42TT) CF (CF) 208 (2) (4) M-Tap *Multi-Tap ballast wired at 277 V unless specified (6) lack (K) Soft Gold (SG) Fusing *Specify Single in-line fuse (SF120) (SF277) Double in-line fuse (DF208) (DF240) (DF480) Painted ars *Painted same color as housing. Standard bars are chrome finished. (P) Emergency attery Pack during power outages. (EP) Cold Weather attery Pack during power outages. Rated to -20 C. (CLDPK) Vandal-Resistant Hardware (VRH) (VR) ase Template 8" Round ollard Ø 8" 4½" 4½" 3½" ria Series rea and Wall Sconce fixtures. PS - Pulse Start Metal Halide HPS - High Pressure Sodium CF - Compact *Optional internal, cast-extruded 4½" Ø 5 " olt Circle Rancho Way Rancho Dominguez, C Tel: (310) Fax: (310) uthorized Distributor

9 Sonus LED OLLRDS Fixture Max. Watts Lbs SON W 40 The Sonus LED bollard, whether complimenting our DC-17 decorative poles and fixtures, or standing alone, is the perfect fixture for pathways, streetscapes, large housing complexes; or any other installation in which style, durability and lighting control are desired. The Sonus bollard comes standard with 45 o full cutoff louvers to cast all light downward and out. Lens: Clear, high-impact-resistant acrylic, with silicone gasketing for a weather-tight seal. Housing: Heavy-duty cast aluminum construction. Hand-hole cover supplied for access to bolts and wiring. Finish: Durable Quali-Guard textured thermoset polyester powder coat, oven-baked at a temperature of 400 o F to promote maximum adherence and finish hardness. vailable in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Optics: 45 o full cutoff louvers provide Type V symmetrical light distribution. Lamp: LED High-lumen-output LEDs offer a minimum estimated life expectancy of 60,000 hours. Driver: high-performance electronic LED driver operates at 120 thru 480 volts, 50 to 60 Hz, with a 90% power factor; and is rated for -40 o C operation. 10 kv surge protector supplied as standard. Model Optics Source Milliamps Kelvin Voltage Mounting Finish Options SON-1 45 o Cutoff Grill (COG) # of LEDs 20 (20LC) (5) 700 (7) 4000K *Neutral white (4K) 5500K *Cool white (55K) nchor ase () ronze (Z) lack (K) Eye Hole (EH) Pair with: Non-Lit (NL) Verdigris (VG) Weathered rown (W) Sonus ollard ase Template Ø 7 olt Circle 6⅛ 6⅛ 10 6⅛ DC-17 Matching pole base. Ø 11½ For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC. ny use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 146 uthorized Distributor

10 Sonus HID - CF Fixture Max. Watts Lbs SON W 40 OLLRDS The Sonus bollard, whether complimenting our DC-17 decorative poles and fixtures, or standing alone; is the perfect fixture for pathways, streetscapes, large housing complexes or any other installation in which style, durability and lighting control are desired. The Sonus comes standard with 45 o full cutoff louvers to cast all light downward and out. Lens: Clear, high-impact-resistant acrylic, with silicone gasketing for a weather-tight seal. Housing: Heavy-duty, cast aluminum construction. Hand-hole cover supplied for access to bolts and wiring. Finish: Durable Quali-Guard textured, thermoset polyester powder coat, oven-baked at a temperature of 400 o F to promote maximum adherence and finish hardness. vailable in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Optics: 45 o full cutoff louvers provide Type V symmetrical light distribution. Lamp: HID 50 to 100 watts offered in High Pressure Sodium; or Pulse Start Metal Halide for superior efficiency, lumen maintenance and color rendition. CF 26 to 42 watts in Compact. allast: HID a premium HPF regulating autotransformer, available in High Pressure Sodium or Pulse Start Metal Halide. CF a highperformance electronic transformer operates at 120 thru 277 volts, 50 to 60 Hz, with a 90% power factor, and is rated for -20 o C operation. Model Optics Wattage Source Voltage Mounting Finish Options SON-1 Pair with: DC-17 Matching pole base. 45 o Cutoff Grill (COG) HID 50 (50) 70 (70) 100 (100) Compact * V universal 26 (26DT) 32 (32TT) 42 (42TT) PS (P) CF (CF) HPS (S) PS - Pulse Start Metal Halide HPS - High Pressure Sodium CF - Compact 120 (1) 208 (2) (4) M-Tap *Multi-Tap ballast wired at 277 V unless specified (6) nchor ase () ronze (Z) lack (K) Verdigris (VG) Weathered rown (W) Fusing *Specify Single in-line fuse (SF120) (SF277) Double in-line fuse (DF208) (DF240) (DF480) Emergency attery Pack during power outages. (EP) Cold Weather attery Pack during power outages. Rated to -20 C. (CLDPK) Sonus ollard ase Template Ø 7 olt Circle Ø 11½ 6⅛ 6⅛ 6⅛ Rancho Way Rancho Dominguez, C Tel: (310) Fax: (310) uthorized Distributor

11 OceanWalk - Round LED OLLRDS *OWK-2 w/ COG The OceanWalk - Round LED series of architectural bollards combines contemporary styling with durable, vandal-resistant construction and smooth, low-level, 360-degree symmetrical illumination with available cutoff optics; and is an excellent choice for walkways, entrances, promenades, plazas, courtyards, driveways and landscaped areas. Lens: Clear, high-impact-resistant acrylic, with silicone gasketing for a weather-tight seal. n internal light shield is available. Housing: 8 diameter extruded aluminum housing. Heavy-duty cast aluminum base plate concealed within shaft is designed for standard anchor bolt mounting to a concrete base. 3/8 x 12 galvanized nchor bolts. Optional available for 8 model. *Shown with Paracline Reflector *Shown with 45 o Cutoff Grill Fixture Max. LEDs Lbs OWK or OWK or Finish: Durable Quali-Guard textured thermoset polyester powder coat, vailable in a selection tof architectural or custom colors. Finish is guaranteed for two (2) years. Optics: Choice of specular aluminum paracline reflector, luminum stack louver, or 45 o cutoff grill provides Type V symmetrical light distribution. Lamp: High lumen output LEDs are utilized, offering a minimum estimated life of 60,000 hours. Driver: high-performance LED driver operates at 120 thru 480 volts, 50 to 60 Hz, with a 90% power factor; and is rated for -40 o C operation. 10 kv surge protector supplied as standard. Model Size Optics Source Milliamps Kelvin Voltage Mounting Finish Options OWK-1 8 Round Paracline # of LEDs K nchor ronze Round *Specify height *Neutral white Reflector (Z) Flat Top 20 ase 36 (4K) (PR) (20LC) (8R36) () OWK-2 Round Dome Top (8R42) Stack Louver Reflector (SLR) 530 (5) 700 (7) 5500K *Cool white (55K) lack (K) *For COG only (VR) 45 o Cutoff Grill (COG) ase Template 8" Round ollard Ø 8" 3½" 4½" 4½" 4½" *Optional internal, cast-extruded Ø 5 " olt Circle For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC. ny use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 148 uthorized Distributor

12 OceanWalk - Round HID - CF *OWK-2 w/ COG The OceanWalk - Round series of architectural bollards combines contemporary styling with durable, vandal-resistant construction and smooth, low-level, 360-degree symmetrical illumination with available cutoff optics; and is an excellent choice for walkways, entrances, promenades, plazas, courtyards, driveways and landscaped areas. Lens: Clear, high-impact-resistant acrylic, with silicone gasketing for a weather-tight seal. n internal light shield is available. Housing: Extruded aluminum housing in 6 and 8 diameter sizes. Heavyduty cast aluminum base plate concealed within shaft is designed for standard anchor bolt mounting to a concrete base. 3/8 x 12 galvanized anchor bolts come standard. Optional available. *Shown w/ Paracline Reflector *Shown w/ 45 o Cutoff Grill Fixture Max. Watts Lbs OWK-1 6 or 8 36 or 100 W 40 OWK-2 6 or 8 36 or 100 W 40 Finish: Durable Quali-Guard textured thermoset polyester powder coat, available in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Optics: Choice of specular aluminum paracline reflector, aluminum stack louver, prismatic glass refractor or 45 o cutoff grill. Lamp: selection of Compact (26 to 42 watts) and HID light sources (50 to 100 watts) are offered; including Pulse Start Metal Halide for superior efficiency, lumen maintenance and color rendition. allast: HID Premium HPF regulating autotransformer, available in High Pressure Sodium or Pulse Start Metal Halide. CF high-performance, electronic transformer operates at 120 thru 277 volts, 50 to 60 Hz, with a 90% power factor, and is rated for -20 o C operation. OLLRDS Model Size Optics Wattage Source Voltage Mounting Finish Options OWK-1 6 Round Paracline HID PS HPS 120 nchor ase ronze Round *Specify height Reflector 50 (P) (S) (1) () (Z) Flat Top 36 (PR) (50) (6R36) OWK-2 Round Dome Top (6R42) 8 Round *Specify height 36 (8R36) (8R42) Stack Louver Reflector (SLR) Type V Glass Refractor (GR5) 45 o Cutoff Grill (COG) *8 round only 70 (70) 100 (100) Compact * V Universal 26 (26DT) 26x2 *COG only (26DTx2) 32 (32TT) 32x2 *COG only (32TTx2) 42 (42TT) 42x2 *COG only (42TTx2) CF (CF) *UL Listing in progress PS - Pulse Start Metal Halide HPS - High Pressure Sodium CF - Compact 208 (2) (4) M-Tap *Multi-Tap ballast wired at 277 V unless specified (6) *Optional internal, cast-extruded lack (K) ase Template 6" Round ollard Ø 6" 2.625" Ø 3.875" olt Circle Fusing *Specify Single in-line fuse (SF120) (SF277) Double in-line fuse (DF208) (DF240) (DF480) *For COG only Emergency attery Pack during power outages. (EP) Cold Weather attery Pack during power outages. Rated to -20 C. (CLDPK) *8 only (VR) ase Template 8" Round ollard Ø 8" 4½" 4½" 4½" Ø 5 " olt Circle 3½" Rancho Way Rancho Dominguez, C Tel: (310) Fax: (310) uthorized Distributor

13 OceanWalk - Square LED OLLRDS *OWK-3 w/ COG The OceanWalk - Square series of architectural bollards combines contemporary styling with durable, vandal-resistant construction. The OceanWalk - Square provides smooth, low-level, 360-degree symmetrical illumination with available cutoff optics; and is an excellent choice for walkways, entrances, promenades, plazas, courtyards, driveways, bridges and landscaped areas. Lens: Clear, high-impact-resistant acrylic, with silicone gasketing for a weathertight seal. Housing: 8 extruded aluminum square housing. Heavy-duty cast aluminum base plate concealed within shaft is designed for standard anchor bolt mounting to a concrete base. 3/8 x 12 galvanized anchor bolts come standard. *Shown with Paracline Reflector *Shown with 45 o Cutoff Grill Fixture Max. LEDs Lbs OWK or Finish: Durable Quali-Guard textured thermoset polyester powder coat, ovenbaked at a temperature of 400 o F to promote maximum adherence and finish hardness. vailable in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Optics: Choice of high-efficiency, specular aluminum paracline reflector, aluminum stack louver, prismatic glass refractor or 45 o cutoff grill. Type V symmetrical light distribution. Lamp: High lumen output LEDs are utilized, offering a minimum estimated life of 60,000 hours. Driver: high-performance LED driver operates at 120 thru 480 volts, 50 to 60 Hz, with a 90% power factor; and is rated for -40 o C operation. 10 kv surge protector supplied as standard. Model Size Optics Source Milliamps Kelvin Voltage Mounting Finish Options OWK-3 8 Square Paracline # of LEDs K nchor ronze *Specify height Reflector 20 *Neutral white ase (Z) 36 (PR) (20LC) (4K) (8S36) () (8S42) Stack Louver Reflector (SLR) 530 (5) 700 (7) 5500K *Cool white (55K) lack (K) *For COG only (VR) Type V Glass Reflector (GR5) 45 o Cutoff Grill (COG) 5" ase Template 8" Square ollard 5⅞" Ø 7⅛" olt Circle 4" *Optional internal, cast-extruded For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC. ny use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 5" 150 uthorized Distributor

14 OceanWalk - Square HID - CF *OWK-3 w/ COG The OceanWalk - Square series of architectural bollards combines contemporary styling with durable, vandal-resistant construction. The OceanWalk - Square provides smooth, low-level, 360-degree symmetrical illumination with available cutoff optics; and is an excellent choice for walkways, entrances, promenades, plazas, courtyards, driveways, bridges and landscaped areas. Lens: Clear, high-impact-resistant acrylic, with silicone gasketing for a weathertight seal. Housing: 8 extruded aluminum square housing. Heavy-duty cast aluminum base plate concealed within shaft is designed for standard anchor bolt mounting to a concrete base. 3/8 x 12 galvanized anchor bolts come standard. Finish: Durable Quali-Guard textured thermoset polyester powder coat, *Shown w/ Paracline Reflector *Shown w/ 45 o Cutoff Grill Fixture Max. Watts Lbs OWK or 100 W 40 oven-baked at a temperature of 400 o F to promote maximum adherence and finish hardness. Finish is guaranteed for two (2) years. Optics: Choice of high-efficiency, specular aluminum paracline reflector, aluminum stack louver, prismatic glass refractor or 45 o cutoff grill. Type V symmetrical light distribution. Lamp: selection of Compact (26 to 42 watts) and HID light sources (50 to 100 watts) are offered; including Pulse Start Metal Halide for superior efficiency, lumen maintenance and color rendition. allast: HID Premium HPF regulating autotransformer, available in High Pressure Sodium or Pulse Start Metal Halide. CF high-performance, electronic transformer operates at 120 thru 277 volts, 50 to 60 Hz, with a 90% power factor, and is rated for -20 o C operation. OLLRDS Model Size Optics Wattage Source Voltage Mounting Finish Options OWK-3 8 Square *Specify height 36 (8S36) (8S42) Paracline Reflector (PR) Stack Louver Reflector (SLR) Type V Glass Reflector (GR5) 45 o Cutoff Grill (COG) HID 50 (50) 70 (70) 100 (100) Compact * V Universal 26 (26DT) 26x2 *COG only (26DTx2) 32 (32TT) 32x2 *COG only (32TTx2) 42 (42TT) 42x2 *COG only (42TTx2) PS (P) HPS (S) CF (CF) *UL Listing in progress PS - Pulse Start Metal Halide HPS - High Pressure Sodium CF - Compact 120 (1) 208 (2) (4) M-Tap *Multi-Tap ballast wired at 277 V unless specified (6) nchor ase () *Optional internal, cast-extruded ronze (Z) lack (K) Fusing *Specify Single in-line fuse (SF120) (SF277) Double in-line fuse (DF208) (DF240) (DF480) *For COG only Emergency attery Pack during power outages. (EP) Cold Weather attery Pack during power outages. Rated to -20 C. (CLDPK) (VR) 5" ase Template 8" Square ollard 5" 5⅞" Ø 7⅛" olt Circle 4" Rancho Way Rancho Dominguez, C Tel: (310) Fax: (310) uthorized Distributor

15 DT Product Sales & Support Endurascape (951) Project Name: Catalog Number: Type LED OLLRDS EDS-1 *EDS-1 w/ LT Texture *EDS-1 w/ HV Texture EDS-1 EDS-2 EDS-3 EDS-4 Fixture Max. LEDs Lbs EDS-1 8 O.D. 43½ EDS-1 11 O.D EDS-2 11 O.D. 40¼ EDS-3 11 Sq EDS-4 11 Sq The Endurascape series of concrete bollards are designed to enhance and blend with architectural and natural landscapes. eautifully crafted with textured finishes in a variety of shapes and cast grill louver designs. Optics provide smooth, 360-degree symmetrical low level illumination. Durably built for weather and vandal resistance. Ideal for walkways, entrances, promenades, plazas, courtyards, driveways, bridges and landscaped areas. Louver Finish: Durable Quali-Guard textured thermoset polyester powder coat, oven-baked at a temperature of 400 of to promote maximum adherence and finish hardness. vailable in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Lens: Clear, high-impact-resistant acrylic, with silicone gasketing for a weather-tight seal. n optional internal light shield is available. Lamp: High lumen output LEDs are utilized, offering a minimum estimated life of 60,000 hours. Housing: Steel-reinforced pre-cast hollow core concrete in round or square shapes, four top styles and three textured finishes. Rugged cast aluminum grill louvers with 45 cutoff or horizontal cutoff. Driver: high-performance LED driver operates at 120 thru 480 volts, 50 to 60 Hz, with a 90% power factor; and is rated for -40 oc operation. 10 kv surge protector supplied as standard. Model Optics Source EDS-1 45 Cutoff Grill # of LEDs 20 8 Round *8 only (COG) Milliamps Kelvin K (20LC) 530 (5) EDS-1 11 Round 700 *Neutral white (4K) 5500K Optics: Uniform Type V symmetrical light distribution. Optional internal light shield for Type III distribution. Voltage Mounting Finish Options nchor ase Louver Color ronze *Consult factory for mounting information *Cool white (55K) EDS-2 (Z) lack (K) (7) 11 Round Flat top () 45 Cutoff Grill Forest Green *11 only (COG) EDS-3 11 Square Silver Metallic Horizontal Grill *11 only (HZG) EDS-4 Concrete Texture Light 11 Square Pyramid top (LT) Medium (MD) Endurascape ase Detail nchor bolt projection must be below grade. Grout Recessed rea Heavy (HV) LED - Light Emitting Diode For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC. ny use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 152 uthorized Distributor (800) support@bdtenergygroup.com

16 Endurascape HID - CF EDS-1 EDS-1 EDS-2 EDS-3 EDS-4 Fixture Max. Watts Lbs EDS-1 8 O.D. 100 W 275 *EDS-1 w/ LT Texture *EDS-1 w/ HV Texture EDS-1 11 O.D. 150 W 325 EDS-2 11 O.D. 40¼ 150 W 320 EDS-3 11 Sq W 275 EDS-4 11 Sq W 325 OLLRDS The Endurascape series of concrete bollards is designed to enhance and blend with architectural and natural landscapes. eautifully crafted in a variety of shapes and choice of textures, the Endurascape is offered with two cast grill designs. oth optics provide smooth, 360-degree symmetrical low-level illumination. Durably-built for weather- and vandal-resistance, this concrete bollard is ideal for walkways, entrances, promenades, plazas, courtyards, driveways, bridges and all landscaped areas. Lens: Clear, high-impact-resistant acrylic, with silicone gasketing for a weathertight seal. n optional internal light shield is available. Housing: Steel-reinforced pre-cast hollow core concrete in round or square shapes, four top styles and three textured finishes. Rugged cast aluminum grill louvers with 45 cutoff or horizontal cutoff. Optics: Uniform Type V symmetrical light distribution. Optional internal light shield for Type III distribution. Louver Finish: Durable Quali-Guard textured thermoset polyester powder coat, oven-baked at a temperature of 400 o F to promote maximum adherence and finish hardness. vailable in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Lamp: HID 50 to 150 watts offered in High Pressure Sodium; or Pulse Start Metal Halide for superior efficiency, lumen maintenance and color rendition. CF 26 to 84 watts in Compact. allast: HID Premium HPF regulating autotransformer, available in High Pressure Sodium or Pulse Start Metal Halide, is mounted to a bracket attached to the optical assembly. CF high-performance, electronic transformer operates at 120 thru 277 volts, 50 to 60 Hz, with a 90% power factor, and is rated for -20 o C operation. Model Optics Wattage Source Voltage Mounting Finish Options EDS-1 8 Round EDS-1 11 Round EDS-2 11 Round Flat top EDS-3 11 Square EDS-4 11 Square Pyramid top 45 Cutoff Grill *8 only (COG) 45 Cutoff Grill *11 only (COG) Horizontal Grill *11 only (HZG) HID 50 (50) 70 (70) 100 (100) 150 *11 only (150) Compact * V universal 26 (26DT) 26 2 *11 only (26DTx2) 32 (32TT) 32 2 *11 only (32TTx2) 42 (42TT) 42 2 *11 only (42TTx2) PS (P) CF (CF) HPS (S) PS - Pulse Start Metal Halide HPS - High Pressure Sodium CF - Compact 120 (1) 208 (2) (4) M-Tap *Multi-Tap ballast wired at 277 V unless specified (6) nchor ase *Consult factory for mounting information () Louver Color ronze (Z) lack (K) Forest Green Silver Metallic Concrete Texture Light (LT) Medium (MD) Heavy (HV) Fusing *Specify Single in-line fuse (SF120) (SF277) Double in-line fuse (DF208) (DF240) (DF480) Endurascape ase Detail nchor bolt projection must be below grade. Grout Recessed rea Rancho Way Rancho Dominguez, C Tel: (310) Fax: (310) uthorized Distributor

17 Catalina LED OLLRDS The Catalina bollard combines contemporary styling with architectural appeal. It provides smooth, 360-degree symmetrical low level illumination, and is an excellent choice for walkways, entrances, promenades, plazas, courtyards, driveways, bridges and landscaped areas. Lens: Clear, high-impact-resistant acrylic, with silicone gasketing for a weather-tight seal. n optional internal light shield is available. Housing: Extruded aluminum 8-inch diameter housing, with spun aluminum top cap. Heavy-duty cast aluminum base plate concealed within shaft is designed for standard anchor bolt mounting to concrete base. Fixture Max. Watts Lbs CTL or 45 W 35 Finish: Durable Quali-Guard textured thermoset polyester powder coat, oven-baked at a temperature of 400 o F to promote maximum adherence and finish hardness. vailable in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Optics: Prismatic glass refractor with horizontal louver grill. Offered with Type III and Type V light distribution patterns. Lamp: High lumen output LEDs are utilized, offering a minimum estimated life of 60,000 hours. Driver: high-performance LED driver operates at 120 thru 480 volts, 50 to 60 Hz, with a 90% power factor; and is rated for -40 o C operation. 10 kv surge protector supplied as standard. Model Size Optics Source Milliamps Kelvin Voltage Mounting Finish Options CTL-1 8 Round Type III # of LEDs K nchor ronze *Specify height *Neutral white Glass 20 ase (Z) 36 (4K) Refractor (20LC) (8R36) () (GR3) (8R42) Type V Glass Refractor (GR5) 530 (5) 700 (7) 5500K *Cool white (55K) lack (K) (VR) Soft Gold (SG) ase Template 8" Round ollard Ø 8" 3½" 4½" 4½" 4½" *Optional internal, cast-extruded Ø 5 " olt Circle For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC. ny use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 154 uthorized Distributor

18 Catalina HID - CF The Catalina bollard combines contemporary styling with architectural appeal. Provides smooth, 360-degree symmetrical low level illumination. n excellent choice for walkways, entrances, promenades, plazas, courtyards, driveways, bridges and landscaped areas. Lens: Clear, high-impact-resistant acrylic. Housing: Extruded aluminum 8-inch diameter housing with spun aluminum top cap. Heavy-duty cast aluminum base plate concealed within shaft is designed for standard anchor bolt mounting to concrete base. Finish: Durable Quali-Guard textured thermoset polyester powder coat, oven-baked at a temperature of 400 o F to promote maximum adherence and finish hardness. vailable in a selection of architectural Fixture Max. Watts Lbs CTL or 100 W 35 or custom colors. Finish is guaranteed for two (2) years. Optics: Prismatic glass refractor with horizontal louver grill. Offered with Type III and Type V light distribution patterns. Lamp: selection of Compact (26 to 42 watts) and HID light sources (50 to 100 watts) are offered; including Pulse Start Metal Halide for superior efficiency, lumen maintenance and color rendition. allast: HID Premium HPF regulating autotransformer, available in High Pressure Sodium; or Pulse Start Metal Halide for superior efficiency, lumen maintenance and color rendition. CF high-performance, electronic transformer operates at 120 thru 277 volts, 50 to 60 Hz, with a 90% power factor, and is rated for -20 o C operation. OLLRDS Model Size Optics Wattage Source Voltage Mounting Finish Options CTL-1 8 Round *Specify height 36 (8R36) (8R42) Type III Glass Refractor (GR3) Type V Glass Refractor (GR5) HID 50 (50) 70 (70) 100 (100) Compact * V universal 26 (26DT) 32 (32TT) 42 (42TT) PS (P) HPS (S) CF (CF) *UL Listing in progress PS - Pulse Start Metal Halide HPS - High Pressure Sodium CF - Compact 120 (1) 208 (2) (4) M-Tap *Multi-Tap ballast wired at 277 V unless specified (6) nchor ase () ronze (Z) lack (K) Soft Gold (SG) Fusing *Specify Single in-line fuse (SF120) (SF277) Double in-line fuse (DF208) (DF240) (DF480) Emergency attery Pack during power outages. (EP) Cold Weather attery Pack during power outages. Rated to -20 C. (CLDPK) (VR) ase Template 8" Round ollard Ø 8" 4½" 4½" 4½" 3½" *Optional internal, cast-extruded Ø 5 " olt Circle Rancho Way Rancho Dominguez, C Tel: (310) Fax: (310) uthorized Distributor

19 Torneo LED OLLRDS Fixture C Max. Watts Lbs TOR W 35 The Torneo architectural bollard presents a distinctive nautical look, and complements similar post and wall mount fixtures in the same application. Durable construction. Provides smooth, 360-degree symmetrical low level illumination. Ideal for boardwalks, entrances, walkways, bridges, plazas, courtyards, driveways, and landscaped areas. Lens: Clear, high-impact-resistant acrylic with silicone gasketing for a weather-tight seal. n optional internal light shield is available. Housing: Cast aluminum top housing with vertical supports. 8 inch diameter extruded aluminum shaft. Heavy-duty cast aluminum base plate concealed within shaft is designed for standard anchor bolt mounting to concrete base. Finish: Durable Quali-Guard textured thermoset polyester powder coat, oven-baked at a temperature of 400 o F to promote maximum adherence and finish hardness. vailable in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Optics: Choice of high efficiency specular aluminum paracline refractor, aluminum stack louver, and prismatic glass refractor. vailable with Type V symmetrical light distribution. Lamp: High lumen output LEDs are utilized, offering a minimum estimated life of 60,000 hours. Driver: high-performance LED driver operates at 120 thru 480 volts, 50 to 60 Hz, with a 90% power factor; and is rated for -40 o C operation. 10 kv surge protector supplied as standard. Model Size Optics Source Milliamps Kelvin Voltage Mounting Finish Options TOR-1 8 Round (8R42) Paracline Reflector (PR) Stack Louver Reflector (SLR) # of LEDs 20 (20LC) (5) 700 (7) 4000K *Neutral white (4K) 5500K *Cool white (55K) nchor ase () ronze (Z) lack (K) (VR) Type V Glass Refractor (GR5) " ase Template 8" Round ollard Ø 8" 3½" 4½" 4½" 4½" *Optional internal, cast-extruded Ø 5 " olt Circle For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC. ny use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 156 uthorized Distributor

20 Torneo HID - CF Fixture C Max. Watts Lbs TOR W 50 OLLRDS The Torneo architectural bollard presents a distinctive nautical look, and complements similar post and wall mount fixtures in the same application. Durable construction. Provides smooth, 360-degree symmetrical low level illumination. Ideal for boardwalks, entrances, walkways, bridges, plazas, courtyards, driveways, and landscaped areas. Lens: Clear, high-impact-resistant acrylic with silicone gasketing for a weathertight seal. n optional internal light shield is available. Housing: Cast aluminum top housing with vertical supports. 8 inch diameter extruded aluminum shaft. Heavy-duty cast aluminum base plate concealed within shaft is designed for standard anchor bolt mounting to concrete base. Finish: Durable Quali-Guard textured thermoset polyester powder coat, ovenbaked at a temperature of 400 o F to promote maximum adherence and finish hardness. vailable in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Optics: Choice of high efficiency specular aluminum paracline refractor, aluminum stack louver, and prismatic glass refractor. vailable with Type V symmetrical light distribution. Lamp: selection of Compact (26 to 42 watts) and HID light sources (50 to 100 watts) are offered; including Pulse Start Metal Halide for superior efficiency, lumen maintenance and color rendition. allast: HID Premium HPF regulating autotransformer, available in High Pressure Sodium or Pulse Start Metal Halide. CF high-performance, electronic transformer operates at 120 thru 277 volts, 50 to 60 Hz, with a 90% power factor, and is rated for -20 o C operation. Model Size Optics Wattage Source Voltage Mounting Finish Options TOR-1 8 Round Paracline HID PS HPS 120 nchor ronze Reflector 50 (P) (S) (1) ase (Z) (8R42) (PR) (50) () Stack Louver Reflector (SLR) Type V Glass Refractor (GR5) 70 (70) 100 (100) Compact * V universal 26 (26DT) 32 (32TT) 42 (42TT) CF (CF) 208 (2) (4) M-Tap *Multi-Tap ballast wired at 277 V unless specified (6) lack (K) Fusing *Specify Single in-line fuse (SF120) (SF277) Double in-line fuse (DF208) (DF240) (DF480) Emergency attery Pack during power outages. (EP) Cold Weather attery Pack during power outages. Rated to -20 C. (CLDPK) (VR) ase Template 8" Round ollard Ø 8" 4½" 4½" 3½" PS - Pulse Start Metal Halide HPS - High Pressure Sodium CF - Compact *Optional internal, cast-extruded 4½" Ø 5 " olt Circle Rancho Way Rancho Dominguez, C Tel: (310) Fax: (310) uthorized Distributor

21 Pavilion HID OLLRDS Fixture Max. Watts Lbs PV W 35 The Pavilion bollard combines contemporary styling with architectural appeal. Match the Pavilion bollard to Visionaire Lighting s Pavilion II area fixture (see rchitectural section) for an exciting, uniform project look. This bollard provides smooth, low-level, 360-degree, symmetrical illumination. It is an excellent choice for walkways, entrances, promenades, plazas, courtyards, driveways and landscaped areas. Lens: Clear, high-impact-resistant acrylic, with silicone gasketing for a weathertight seal. n optional internal light shield is available. Housing: Extruded aluminum 6 diameter housing with spun aluminum top cap. Heavy-duty, cast aluminum base plate concealed within shaft is designed for standard anchor bolt mounting to a concrete base. Galvanized anchor bolts are 3/8 x 12. Finish: Durable Quali-Guard textured, thermoset polyester powder coat, available in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Optics: Prismatic glass refractor with clear acrylic horizontal louvers providing Type V symmetrical light distribution. Lamp: HID 50 to 70 watts offered in High Pressure Sodium; or Pulse Start Metal Halide for superior efficiency, lumen maintenance and color rendition. CF 26 to 42 watts in Compact. allast: HID a premium HPF regulating autotransformer, available in High Pressure Sodium or Pulse Start Metal Halide. CF a high-performance electronic transformer operates at 120 thru 277 volts, 50 to 60 Hz, with a 90% power factor, and is rated for -20 o C operation. Model Size Optics Wattage Source Voltage Mounting Finish Options PV-1 Pair with: 6 Round 36 (6R36) (6R42) Type V Glass Refractor (GR5) HID 50 (50) 70 (70) PS HPS (P) (S) 120 (1) 208 (2) (4) M-Tap *Multi-Tap ballast wired at 277 V unless specified (6) nchor ase () ronze (Z) lack (K) Soft Gold (SG) Fusing *Specify Single in-line fuse (SF120) (SF277) Double in-line fuse (DF208) (DF240) (DF480) Emergency attery Pack *CF only. Gives 90+ minutes of illumination during power outages. (EP) Cold Weather attery Pack *CF only. Gives 90+ minutes of illumination during power outages. Rated to -20 C. (CLDPK) ase Template 6" Round ollard Ø 6" " Pavilion II rchitectural fixture. PS - Pulse Start Metal Halide HPS - High Pressure Sodium 3 Ø 3.875" olt Circle For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC. ny use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 158 uthorized Distributor

22 Pavilion CF Fixture Max. Watts Lbs PV W 35 OLLRDS The Pavilion bollard combines contemporary styling with architectural appeal. Match the Pavilion bollard to Visionaire Lighting s Pavilion II area fixture (see rchitectural section) for an exciting, uniform project look. This bollard provides smooth, low-level, 360-degree, symmetrical illumination. It is an excellent choice for walkways, entrances, promenades, plazas, courtyards, driveways and landscaped areas. Lens: Clear, high-impact-resistant acrylic, with silicone gasketing for a weathertight seal. n optional internal light shield is available. Housing: Extruded aluminum 6 diameter housing with spun aluminum top cap. Heavy-duty, cast aluminum base plate concealed within shaft is designed for standard anchor bolt mounting to a concrete base. Galvanized anchor bolts are 3/8 x 12. Finish: Durable Quali-Guard textured, thermoset polyester powder coat, available in a selection of architectural or custom colors. Finish is guaranteed for two (2) years. Optics: Prismatic glass refractor with clear acrylic horizontal louvers providing Type V symmetrical light distribution. Lamp: HID 50 to 70 watts offered in High Pressure Sodium; or Pulse Start Metal Halide for superior efficiency, lumen maintenance and color rendition. CF 26 to 42 watts in Compact. allast: HID a premium HPF regulating autotransformer, available in High Pressure Sodium or Pulse Start Metal Halide. CF a high-performance electronic transformer operates at 120 thru 277 volts, 50 to 60 Hz, with a 90% power factor, and is rated for -20 o C operation. Model Size Optics Wattage Source Voltage Mounting Finish Options PV-1 Pair with: 6 Round 36 (6R36) (6R42) Type V Glass Refractor (GR5) Compact * V universal 26 (26DT) 32 (32TT) 42 (42TT) CF (CF) 120 (1) 208 (2) (4) M-Tap *Multi-Tap ballast wired at 277 V unless specified (6) nchor ase () ronze (Z) lack (K) Soft Gold (SG) Fusing *Specify Single in-line fuse (SF120) (SF277) Double in-line fuse (DF208) (DF240) (DF480) Emergency attery Pack *CF only. Gives 90+ minutes of illumination during power outages. (EP) Cold Weather attery Pack *CF only. Gives 90+ minutes of illumination during power outages. Rated to -20 C. (CLDPK) ase Template 6" Round ollard Ø 6" " Pavilion II rchitectural fixture. CF - Compact 3 Ø 3.875" olt Circle Rancho Way Rancho Dominguez, C Tel: (310) Fax: (310) uthorized Distributor