FAST CURE FLOOR COATING

Size: px
Start display at page:

Download "FAST CURE FLOOR COATING"

Transcription

1

2 Luxafloor FCF FAST CURE FLOOR COATING LUXAFLOOR FCF is a two pack, high performance, fast cure floor coating designed to get assets back into service quickly with very short cure times while maintaining a long pot life allowing for flexible application. LUXAFLOOR FCF exhibits excellent gloss and colour retention under UV exposure, making it suitable for exterior application. LUXAFLOOR FCF should be applied on to correctly prepared concrete floors with LUXAFLOOR AGGREGATES for slip resistant finishes as required. FEATURES BENEFITS Isocyanate free 8 hour pot life 2 hour recoat Fast curing Flexibility in application time Job done in a day 1 day full cure MEETING SLIP RESISTANCE SPECIFICATIONS Aggregate Wet Pendulum AS 4586: 2013 Oil-Wet Ramp AS 4586: 2013 No Aggregate P1 R9 Luxafloor Stir In Aggregate Fine P3 R10 Luxafloor Stir in Aggregate Coarse P3 R10 Luxafloor Broadcast Aggregate No 36 P5 R12 Please refer to Luxafloor FCF data sheet for more information. Results of laboratory testing when the aggregate is applied as per directions and usage rates in the Luxafloor aggregate data sheet.

3 PREPARATION NEW CONCRETE 01 Remove all surface contaminants with Gamlen CA 1 detergent. 02 Fill any cracks or voids using appropriate repair filler*. 03 Diamond grind, track or light shot blast. Remove all dust by vacuum cleaning. *IF USING REPAIR FILLERS OR YOU ARE IN ANY DOUBT ABOUT POTENTIAL CONTAMINANTS IN THE CONCRETE, PRIME WITH DUREMAX GPE WITH QUICKTURN HARDENER AS THE FIRST COAT PRIOR TO USING LUXAFLOOR FCF. 01 Test adhesion by standard cross hatch adhesion test. If coating fails remove it. If coating is sound continue. 02 Remove all surface contaminants with Gamlen CA 1 detergent. 03 Fill any cracks or voids using appropriate repair filler. Spot prime any bare areas. 04 Diamond grind. Vacuum clean to remove all dust. LUXAFLOOR FCF WILL NOT CURE ON ALKYD BASED OR WATER BASED FLOOR COATINGS. IF YOU ARE IN ANY DOUBT ABOUT THE EXISITING COATING TYPE USE DUREMAX GPE WITH QUICKTURN HARDENER AS THE FIRST COAT PRIOR TO USING LUXAFLOOR FCF. CONCRETE FLOOR PROTECTION CONCRETE WITH EXISTING COATING

4 APPLICATION TO RETURN TO SERVICE - possible in 2 days* *Comparison at 25 C and 50% relative humidity. Total service time will vary. Application time has been calculated at 2 hours. Timeline is based on continuous work. Standard Epoxy Floor ing With Standard Hardener HOW MANY HOURS? START FIRST 14 HOURS RECOAT SECOND Light Traffic DAYS Return to Service 1st coat: Duremax GPE with Quickturn Hardener 2nd coat: Luxafloor FCF HOW MANY HOURS? 3 31 START 2 DAYS FIRST 3 HOURS RECOAT SECOND Light Traffic Return to Service Luxafloor FCF can be applied directly to concrete with the following precautions:» DO NOT use Luxafloor FCF over concrete that has been prepared by acid etch» DO NOT pour Luxafloor FCF into concrete expansion gaps» DO NOT tint Luxafloor FCF contact a Dulux PC representative for advice» Luxafloor FCF is not compatible with repair fillers use a primer. If you're in any doubt about contaminants, use Duremax GPE with Quickturn Hardener as a primer. Any advice, recommendation, information, assistance or service provided by DULUX Australia in relation to goods manufactured by it or their use and application is given in good faith and is believed by Dulux to be appropriate and reliable. However, any advice, recommendation, information, assistance or service provided by Dulux is provided without liability or responsibility PROVIDED THAT the foregoing shall not exclude, limit, restrict or modify the right entitlements and remedies conferred upon any person or the liabilities imposed upon Dulux by any condition or warranty implied by Commonwealth, State or Territory Act or ordinance void or prohibiting such exclusion limitation or modification. Products can be expected to perform as indicated on the products datasheet so long as applications and application procedures are as recommended.

5 Dulux Australia 1956 Dandenong Road Clayton VIC 3168 Dulux Customer Service Phone Dulux New Zealand 150 Hutt Park Road Lower Hutt New Zealand Dulux NZ Customer Service Phone SCAN ME For more detailed product and safety information or for your nearest store location please visit our website. Dulux, the Squares Device, Luxafloor and Duremax are registered trade marks of DuluxGroup (Australia) Pty Ltd. TM Quickturn is a trade mark of DuluxGroup (Australia) Pty Ltd.