Albero 4. porcelain stoneware. tile - porcelain - stone - mosaics - glass

Transcription

1 Albero 4 porcelain stoneware tile - porcelain - stone - mosaics - glass

2 porcelain stoneware BLACK & WHITE 3x24

3 Black & White DOM A4BW 624 in. 6 x 24 cm. 15 x 60 DOM A4BW 440 in. 4 x 40 cm. 10 x 100 DOM A4BW 840

4 porcelain stoneware camel 4x40

5 Camel DOM A4CA 624 in. 6 x 24 cm. 15 x 60 DOM A4CA 440 in. 4 x 40 cm. 10 x 100 DOM A4CA 840

6 porcelain stoneware cream 4x40, 8x40

7 Cream DOM A4CR 624 in. 6 x 24 cm. 15 x 60 DOM A4CR 440 in. 4 x 40 cm. 10 x 100 DOM A4CR 840

8 porcelain stoneware grey 3x24, 6x24, 4x40, 8x40

9 Grey DOM A4GR 624 in. 6 x 24 cm. 15 x 60 DOM A4GR 440 in. 4 x 40 cm. 10 x 100 DOM A4GR 840

10 porcelain stoneware rosso & sand 3x24, 6x24

11 Rosso & Sand DOM A4RS 624 in. 6 x 24 cm. 15 x 60 DOM A4RS 440 in. 4 x 40 cm. 10 x 100 DOM A4RS 840

12 porcelain stoneware noce sienna 8x8, 6x24 8x16

13 Sienna DOM A4SI 624 in. 6 x 24 cm. 15 x 60 DOM A4SI 440 in. 4 x 40 cm. 10 x 100 DOM A4SI 840

14 porcelain stoneware walnut 4x40, 8x40

15 Walnut DOM A4WA 624 in. 6 x 24 cm. 15 x 60 DOM A4WA 440 in. 4 x 40 cm. 10 x 100 DOM A4WA 840

16 porcelain stoneware white 4x40, 8x40, 3x24, 6x24

17 White DOM A4WH 624 in. 6 x 24 cm. 15 x 60 DOM A4WH 440 in. 4 x 40 cm. 10 x 100 DOM A4WH 840

18 Layout Schemes walnut CREAM in. 4 x 40 cm. 10 x 100 in. 4 x 40 cm. 10 x 100 SIENNA CAMEL in. 6 x 24 cm. 15 x 60 in. 4 x 40 cm. 10 x 100

19 Specs Suggested Applications floor wall residential light commercial heavy commercial exterior pools Installation Suggestions edge: joint size modular setting plank installation straight S R Re rustic rectified finish: matte honed polished semi-polished structured other Shade Variation V1 Uniform Appearance V2 Slight Variation V3 Moderate Variation V4 Substantial Variation thickness: 10 mm inches Slip Resistance ASTM C-1028 DIN 51097/51130 Coefficient of Friction WET DRY standard* result standard* result accessible.6 0,63.6 routes 0,82 ramps.8.8 Values Tile Classification Questionable Conditionally Slip Resistant > 0.60 Slip Resistant *Industry Standard/ADA Requirements DIN R9* 3-10 R R R R13 >35 Class Typical applications Critical angle A B C DIN Barefoot, but mainly dry aisles and walkways, dry changing areas Shower rooms, pool surrounds, wet changing areas, disinfectant spray areas (plus all Class A areas) Areas constantly under water, e.g. steps into pools, foot baths, inclinded pool surrounds, jacuzzis (plus all Class A&B areas) >12 >18 >24 Scratch Resistance MOH S SCALE UNI EN ISO Stain Resistance ASTM C UNI EN ISO Mineral 1. Talc (Talc) 2. Gypsum (Fingernail) 3. Calcite (Penny) 4. Flourite (Some Marbles) 5. Apatite (Knife Blade) Industry standard <175mm 2 5: Removed after 5 minutes (hot water running) 4: Removed by manual cleaning (weak detergent) 3: Removed by mechanical cleaning (strong detergent) 2: Removed by immersion (24 hrs in suitable solvent) 1: Stain not removed Mineral 6. Microline (Glass, Glazed Tile) 7. Quartz (Unglazed Porcelain) 8. Topaz (Granite) 9. Corundum (Ruby) 10. Diamond (Diamond) Water Absorption Absorbs 0-.5% Impervious Interior/exterior Frost Resistant ASTM C-373 UNI EN ISO Wear Resistance PEI RATING UNI EN ISO Class 1: Walls only Class 2: Resid. floors w/minimal abrasive traffic. Class 3: Resid. interiors normal use and foot traffic. Class 4: Light-medium commercial applications. Class 5: Commercial applications. Absorbs.5-3% Vitreous Interior/exterior Frost Resistant Absorbs 3-7% Semi-Vitreous Indoor use only Absorbs 7% + Non-Vitreous Indoor use only Breaking Strength ASTM C648 UNI EN ISO Industry standard should be greater than 250 lbs or 50 N/MM2 Facial Dimension ASTM c UNI EN ISO flatness thickness straightness + 4.5mm squareness + 5.4mm sides L/W Standard + 5mm + 6mm + 1.1mm + 4.5mm Tolerance +.5% +.5% +.5% +.6% +.5% Result +/- 1,8mm +/-1,0mm +/-1,0mm +/-1,0mm +/-1,0mm Chemical Resistance ASTM C650 UNI EN ISO Allowances for: result acid Resistant bases Resistant chemicals Resistant Leed Information REQUIREMENTS FOR COMMERCIAL INTERIORS/NEW CONSTRUCTION Sustainable Sites Site selection SS CREDIT 1 Heat Island Effect-non roof Material with a solar reflectant index of at least 29. Energy & Atmosphere EA CREDIT 4 Green Power: Products that optimize energy performance for floors and walls using thermal conductivity. BTU-FT Indoor Environmental Quality Low-Emitting Materials-Flooring Systems IEQ CREDIT Green Cleaning: Reducing occupants exposure to hazardous cleaning chemicals. IEQ CREDIT 4.1 Low Emitting Adhesives: Products less than 65 G/L VOC IEQ CREDIT 4.3 Low Emitting Materials: Flooring systems. Allowances for: 1 Point Materials & Resources 1 Point 2 Points M&R CREDIT 2 Construction Waste Management: 50% 70% Recycling salvaged construction 1 Point waste in to new reusable materials. M&R CREDIT Recycled Content: The sum of 10% 20% post consumer plus 1/2 of the pre consumer reps at least 10-20% of total value of materials. 1 Point M&R CREDIT 5 Regional Materials: Materials manufactured within 500 miles of the project site. Innovation in Design ID CREDIT 1 Innovation in Design Measurable exemplary environmental performance. 10% 20% 1-5 Points Type: Porcelain Stoneware Product Line: Albero 4

20 tile - porcelain - stone - mosaics - glass Distributed By: 1085 Portion rd. farmingville, ny elkins rd. e. brunswick, NJ NW 84 avenue miami, fl to-cobsa (631) cobsa@cobsausa.com