The Draycott. Floor Coatings and Concrete Systems FOR CAR PARKS AND INDUSTRIAL USE

Transcription

1 The Draycott Floor Coatings and Concrete Systems FOR CAR PARKS AND INDUSTRIAL USE

2 Contents Solutions for Bottom Decks Solutions for Intermediate Decks Solutions for Exposed Decks 7 Solutions for Ramps, Cornering and Turning Areas 9 Solutions for Industrial Solutions for Surface Repair. The system view illustrations, photographs, general technical details, explanations and diagrams shown in this brochure serve only to give an approximate idea of the products and systems. The contents of this brochure are not to be regarded as statements or representations of facts.. Colours shown on the system views are for illustration purposes only. Refer to Nippon Paint colour chart for actual colour selection.. The recommended systems are by no means exhaustive, and merely serve to represent commonly used fl ooring systems.. Users may consult with Nippon Paint on the general suitability of the product and systems for their needs and specifi c application practices. However, it remains each user s responsibility to determine the suitability of any product or system for their needs and specifi c application practices.. The condition of the substrate, environment and application must be considered prior to the use of the products and systems. 6. All product technical data specifi cations and system descriptions must always be observed and met. All rights reserved. This brochure or any part thereof may not be copied, modifi ed, distributed, reproduced or reused without the prior written consent of Nippon Paint Singapore. Whilst every effort has been made to ensure the accuracy of the information contained in this brochure, Nippon Paint Singapore, its employees and its agents shall not be responsible for any mistake or inaccuracy that may be contained herein and all such liability and responsibility are expressly disclaimed.

3 About Nippon Paint A household name in Singapore, Nippon Paint was founded in Japan in 88. One of the world s largest paint companies, it remains at the forefront of paint and coating innovation. Nippon Paint was established in Singapore in 96, the year of national Independence. The first international paint company to sink roots in Singapore, the company grew and prospered to become the brand of choice among professionals and homeowners. Today, it is the largest paint manufacturer and retailer in Singapore. Nippon Paint has secured its place at the vanguard of innovation by relentlessly pursuing research and development. To date, it has formulated paints that perform a wide range of functions, far beyond protection and decoration. For example, Nippon Paint SolaReflect is a cool paint that reduces heat build-up inside buildings by reflecting the far infrared rays of the sun. Nippon Paint VirusGuard and EvoMedico are both anti-bacterial and anti-viral paints that inhibit the spread of infection in hospitals, schools and public institutions. In line with the growing global awareness of the need for sustainability, Nippon Paint Singapore goes to great lengths to ensure that its products are as environmentally friendly as possible. In fact, Nippon Paint Singapore is the first and only paint manufacturer in Singapore with products that have been awarded four ticks in the stringent Singapore Green Building Products (SGBP) certification scheme, conducted by the Singapore Green Building Council. Catering to the needs of car park, warehouse, factory and industrial building owners, Nippon Paint FloorShield offers a full range of solutions for medium-traffic to heavy-traffic areas subjected to traffic ranging from humans to heavy vehicles and machinery. Various systems address the demands of exposed and open-air car parks that must withstand extreme weathering, from intense sunlight to rainfall. Slip-resistant and washable coatings are also available to optimise safety and minimise maintenance. As with all Nippon Paint coatings, FloorShield products protect both the surfaces they cover as well as the humans who interact with them daily in car parks, warehouses, industrial and other public spaces. 6096Y NP Floorshield 087_R.indd //7 :7 PM

4 Solutions for Bottom Decks For bottom decks where waterproofi ng is essential, Nippon Paint FloorShield provides a range of solutions that employ a system specially formulated for moisture-prone substrates. These extremely durable solutions are available with a choice of anti-skid, slip-resistant and washable top coats.

5 Floorshield Solutions for Bottom Decks Characteristics Description Key Features/ Properties Layer Thickness No sudden or varying temperature changes Danger of uprising moisture/dampness from concrete Structure of a rigid epoxy resin system and cementitious screed High anti-skid High durability Crack bridging mm per layer per coat (thickness varies, depending on the mechanical stress). Structure of a Rigid Epoxy Mortar System +. Treated concrete substrate. Floorshield SF Epoxy Primer. Floorshield SF Epoxy Mortar. Floorshield SF OP Texture Finish. Scatter coat of non-skid aggregates 6. Floorshield SF Epoxy Finish 6 Recommended Systems. Structure of a Rigid Cementitious Screed and Epoxy Resin System ++. Treated concrete substrate. Floorshield 80 Water Dispersion Primer. Floorshield 8 Re-Surfacing Screed mmm. Floorshield SF OP Texture Finish. Scatter coat of non-skid aggregates 6. Floorshield SF Epoxy Finish 6 ANTI-SKID GLOSS CRACK BRIDGING SOUND DAMPENING WATER RESISTANT SF Solvent-free SB Solvent-based PU Polyurethane OP Orange Peel + Ensure a moisture level of below 6% for application [measured electrically using Tramex (ME)] ++ Ensure a moisture level of below % for application [measured electrically using Tramex (ME)]. The system view illustrations, photographs, general technical details, explanations and diagrams shown in this brochure serve only to give an approximate idea of the products and systems. The contents of this brochure are not to be regarded as statements or representations of facts.. Colours shown on the system views are for illustration purposes only. Refer to Nippon Paint colour chart for actual colour selection.. The recommended systems are by no means exhaustive, and merely serve to represent commonly used fl ooring systems.. Users may consult with Nippon Paint on the general suitability of the product and systems for their needs and specifi c application practices. However, it remains each user s responsibility to determine the suitability of any product or system for their needs and specifi c application practices.. The condition of the substrate, environment and application must be considered prior to the use of the products and systems. 6. All product technical data specifi cations and system descriptions must always be observed and met.

6 Solutions for Intermediate Decks Ideal for intermediate decks, Nippon Paint FloorShield provides watertight solutions that employ 00% polyurethane build-up systems. They absorb movement and withstand the fl exing of intermediate and suspended car park deck structures, while providing anti-slip surfaces for the stable handling of vehicles and the safety of motorists.

7 Floorshield Solutions for Intermediate Decks Characteristics Description Key Features/ Properties Layer Thickness Low to moderate requirements on crack fi lling, bonding, sealing properties Experience slight or large temperature changes Structure of a rigid resin fl ooring system Anti-skid properties High durability Chemical-resistant mm per layer per coat (thickness varies, depending on the mechanical stress). Structure of a Rigid Epoxy Resin System. Treated concrete substrate. Floorshield SB Epoxy Primer. Floorshield SF Epoxy Finish. Floorshield SB PU Top Coat (UV Resistant). Structure of a Crack Bridging PU System Recommended Systems. Treated concrete substrate. Floorshield SB Epoxy Primer. Floorshield SF PU Body Coat. Scatter coat of non-skid aggregates. Floorshield SF PU Body Coat 6. Floorshield SB PU Finish (UV Resistant) 6. Structure of a Rigid Epoxy Resin System. Treated concrete substrate. Floorshield SB Epoxy Primer. Floorshield SF Epoxy Finish**. Scatter coat of non-skid aggregates**. Floorshield SF Epoxy Finish 6. Floorshield SB PU Finish (UV Resistant)* 6 ANTI-SKID GLOSS CRACK BRIDGING SOUND DAMPENING UV RESISTANT SF Solvent-free SB Solvent-based PU Polyurethane *Optional, if exposed to sunlight. **Optional, if anti-skid is needed.. The system view illustrations, photographs, general technical details, explanations and diagrams shown in this brochure serve only to give an approximate idea of the products and systems. The contents of this brochure are not to be regarded as statements or representations of facts.. Colours shown on the system views are for illustration purposes only. Refer to Nippon Paint colour chart for actual colour selection.. The recommended systems are by no means exhaustive, and merely serve to represent commonly used fl ooring systems.. Users may consult with Nippon Paint on the general suitability of the product and systems for their needs and specifi c application practices. However, it remains each user s responsibility to determine the suitability of any product or system for their needs and specifi c application practices.. The condition of the substrate, environment and application must be considered prior to the use of the products and systems. 6. All product technical data specifi cations and system descriptions must always be observed and met. 6

8 Solutions for Exposed Decks Nippon Paint FloorShield provides a fl exible, waterproof, 00% polyurethane build-up system especially developed for the unique conditions of exposed car parks/decks. The highly durable solutions are formulated to withstand the synergistic stress of extreme weathering and high wear. 7

9 Floorshield Solutions for Exposed Decks Characteristics Description Key Features/ Properties Layer Thickness Extreme weathering and temperature changes are possible High temperatures are likely to be observed Increased slip-resistant requirement Rising requirement for crack fi lling/bridging polyurethane system Structure of an increased crack fi lling/bridging resin system Weather-proofi ng Flexible and highly durable Water-resistant Resistant against petrol and oils stains Approximately mm per layer per coat (thickness varies, depending on mechanical stress). Structure of a Rigid Resin System. Treated concrete substrate. Floorshield SB Epoxy Primer. Floorshield SF Epoxy Finish. Floorshield SB PU Top Coat (UV Resistant) Recommended Systems. Structure of a Crack Bridging PU System. Treated concrete substrate. Floorshield SB Epoxy Primer. Floorshield SF PU Body Coat. Scatter coat of non-skid aggregates. Floorshield SF PU Body Coat 6. Floorshield SB PU Top Coat (UV Resistant) 6 ANTI-SKID GLOSS UV RESISTANT CRACK BRIDGING SOUND DAMPENING WATER RESISTANT SF Solvent-free SB Solvent-based PU Polyurethane. The system view illustrations, photographs, general technical details, explanations and diagrams shown in this brochure serve only to give an approximate idea of the products and systems. The contents of this brochure are not to be regarded as statements or representations of facts.. Colours shown on the system views are for illustration purposes only. Refer to Nippon Paint colour chart for actual colour selection.. The recommended systems are by no means exhaustive, and merely serve to represent commonly used fl ooring systems.. Users may consult with Nippon Paint on the general suitability of the product and systems for their needs and specifi c application practices. However, it remains each user s responsibility to determine the suitability of any product or system for their needs and specifi c application practices.. The condition of the substrate, environment and application must be considered prior to the use of the products and systems. 6. All product technical data specifi cations and system descriptions must always be observed and met. 8

10 Solutions for Ramps, Cornering and Turning Areas Especially for ramp areas and turning corners in car parks, Nippon Paint FloorShield offers a range of high-performance solutions that are formulated to withstand extreme levels of mechanical abrasion and vibration from traffi c, as well as substantial movement in joints and foundations. Furthermore, they provide resistance to weathering and rainwater. 9

11 Floorshield Solutions for Ramps, Cornering and Turning Areas Characteristics Description Key Features/ Properties Layer Thickness Increased slip resistance requirement High frictional and high abrasion loading Low requirements for crack fi lling Structure of a rigid fl oor coating and concrete system High anti-skid properties Very high durability 0. to 6.0 mm per layer per coat (thickness varies, depending on the mechanical stress). Structure of a Rigid Epoxy Resin System. Treated concrete substrate. Floorshield SB Epoxy Primer. Floorshield SF Epoxy Finish. Full Scatter coat of non-skid aggregates. Floorshield SF Epoxy Finish Recommended Systems. Structure of a Rigid Acrylic Polymer Cementitious Coatings (APCC) System. Treated concrete substrate. Floorshield 80 Water Dispersion Primer. Floorshield 8 Re-Surfacing Screed mmm. Broom sweep for desired texture to give anti-skid fi nish DURABILITY ABRASION RESISTANT ANTI-SKID SF Solvent-free SB Solvent-based PU Polyurethane. The system view illustrations, photographs, general technical details, explanations and diagrams shown in this brochure serve only to give an approximate idea of the products and systems. The contents of this brochure are not to be regarded as statements or representations of facts.. Colours shown on the system views are for illustration purposes only. Refer to Nippon Paint colour chart for actual colour selection.. The recommended systems are by no means exhaustive, and merely serve to represent commonly used fl ooring systems.. Users may consult with Nippon Paint on the general suitability of the product and systems for their needs and specifi c application practices. However, it remains each user s responsibility to determine the suitability of any product or system for their needs and specifi c application practices.. The condition of the substrate, environment and application must be considered prior to the use of the products and systems. 6. All product technical data specifi cations and system descriptions must always be observed and met. 0

12 Solutions for Industrial Formulated to withstand the demanding requirements of industrial environments from factories to warehouses, Nippon Paint FloorShield offers a range of primers and top coats that are as numerous and varied as the diverse applications within this category. They are suitable for both existing concrete and new fl ooring, span acrylics, epoxies and polyurethanes.

13 Floorshield Solutions for Industrial Characteristics Description Key Features/ Properties Layer Thickness Low to no requirements for crack fi lling/bridging No recordable large temperature changes Slip resistance requirement Structure of a rigid fl oor coating and concrete system Easy maintenance Anti-skid properties High durability Easy application Approximately 0. mm to 8.0 mm per layer per coat (thickness varies, depending on mechanical stress). Structure of a Rigid Epoxy Resin System. Treated concrete substrate. Floorshield SB Epoxy Primer or SF Epoxy Primer. Floorshield SF Epoxy Finish (Intermediate Coat). Scatter coat of non-skid aggregates*. Floorshield SF Epoxy Finish (Top Coat). Structure of an Orange Peel Texture Finish System. Treated concrete substrate. Floorshield SB Epoxy Primer or SF Epoxy Primer. Floorshield SF OP Texture Finish (Intermediate Coat). Scatter coat of non-skid aggregates*. Floorshield SF OP Texture Finish (Top Coat) Recommended Systems. Structure of an Extra High Build Glass Flake System. Treated concrete substrate. Floorshield SF Epoxy Primer or SB Epoxy Primer. Floorshield SB XHB GF (Intermediate Coat). Scatter coat of non-skid aggregates*. Floorshield SB XHB GF (Top Coat). Structure of an Impact Resistant Epoxy Mortar System. Treated concrete substrate. Floorshield SF Epoxy Primer. Floorshield SF Epoxy Mortar. Floorshield SF OP Texture Finish. Scatter coat of non-skid aggregates* 6. Floorshield SF Epoxy Finish 6 ANTI-SKID DURABILITY EASY MAINTENANCE EASY APPLICATION CHEMICAL RESISTANT WATER RESISTANT SF Solvent-free SB Solvent-based PU Polyurethane OP Orange Peel *Optional, if anti-skid is needed.. The system view illustrations, photographs, general technical details, explanations and diagrams shown in this brochure serve only to give an approximate idea of the products and systems. The contents of this brochure are not to be regarded as statements or representations of facts.. Colours shown on the system views are for illustration purposes only. Refer to Nippon Paint colour chart for actual colour selection.. The recommended systems are by no means exhaustive, and merely serve to represent commonly used fl ooring systems.. Users may consult with Nippon Paint on the general suitability of the product and systems for their needs and specifi c application practices. However, it remains each user s responsibility to determine the suitability of any product or system for their needs and specifi c application practices.. The condition of the substrate, environment and application must be considered prior to the use of the products and systems. 6. All product technical data specifi cations and system descriptions must always be observed and met.

14 Solutions for Surface Repair Nippon Paint Singapore Warehouse Nippon Paint FloorShield products are ideal for the resurfacing and repair of factory fl oors, warehouses, retail facilities and other high traffi c areas. They deliver chemical resistance, durability, longevity and aesthetics. Their polyurethane topcoat results in far greater chemical, abrasion and impact resistance than with conventional fl oor coatings.

15 Floorshield Solutions for Surface Repair Characteristics Description Key Features/ Properties Layer Thickness Increased requirements for structural & non-structural cracks and surface imperfection repairs High overloading Dangers of broken up concrete with visible symptoms of being fl aked, pitted, oval or circular depressions on surfaces Increased requirements for patching, repairs and leveling of concrete surface with ponding, depressions, small pot holes Structure of a rigid acrylic polymer modifi ed cement-based concrete system High compressive strength Excellent bond strength to substrates High wear, abrasion and impact resistance Water-based and low odour Excellent water-proofi ng qualities Pre-packed easy to mix and apply for speedy installation High skid resistance Suitable for warehouses, car parks and driveways, bus bays, concrete roads, docks, etc..0 mm to 6.0 mm (thickness varies, depending on mechanical stress). Concrete substrate clear of dust, loose particles, oil, grease by scabbling, grid blasting or other means. Floorshield 80 Water Dispersion Primer. Floorshield 8 Re-surfacing Screed (Top Layer Finish). Broom sweep for desired texture to give anti-skid fi nish Deteriorated Surface Recommended Systems C D A B A B C D Delamination Spall Heavily corroded reinforcing bar Crack ANTI-SKID COMPRESSIVE STRENGTH WATERPROOF BOND STRENGTH TO SUBSTRATES HIGH WEAR/ ABRASION/ IMPACT RESISTANCE WATER-BASED AND LOW ODOUR. The system view illustrations, photographs, general technical details, explanations and diagrams shown in this brochure serve only to give an approximate idea of the products and systems. The contents of this brochure are not to be regarded as statements or representations of facts.. Colours shown on the system views are for illustration purposes only. Refer to Nippon Paint colour chart for actual colour selection.. The recommended systems are by no means exhaustive, and merely serve to represent commonly used fl ooring systems.. Users may consult with Nippon Paint on the general suitability of the product and systems for their needs and specifi c application practices. However, it remains each user s responsibility to determine the suitability of any product or system for their needs and specifi c application practices.. The condition of the substrate, environment and application must be considered prior to the use of the products and systems. 6. All product technical data specifi cations and system descriptions must always be observed and met.

16 Nippon Paint (Singapore) Co. Pte Ltd, First Lok Yang Road Jurong Singapore 6978 Telephone: Join us at NipponPaintSingapore