TRITEC light Steel Panel Formwork

Transcription

1 TRITEC light Steel Panel Formwork Perfection made in Germany

2 Various practical illustrations of TRITEC Panel Combinations Guaranteed the largest possible range of sizes with the least possible amount of panels Reduced storage space on building sites Increased amount of castings per element, Various combinations reducing costs Reduced costs for through varied combinations for every ground plan Easy and practical stacking of panels for storage or transport Easy and effective solutions for slanted panels at various heights, wall offsets, length adjustments,corners...etc. 2

3 Design and Features (Properties) of the TRITEC light-system Can be moved without the use of any cranes the panels can be moved by hand due to their light weight The formwork system with only one formwork clamp - Alignment Panel Coupler APC Compatible with the TRITEC Formwork System (80KN) Multi-purpose and versatile Ideal panel formwork for reinforced concrete walls System with 4 different panel heights and widths Well-defined grids for various wall lengths Vibration resistant and aligned at connection joints with the Alignment Panel Coupler APC Used with few additional parts for quick and easy handling with minimum storage needed Developed, produced and tested according to German standards

4

5 System Overview Formwork Clamp APC, Art.-No Formwork Clamp APC light, Art.-No Scaffolding Bracket TTW 80, Art.-No Scaffolding Bracket TTW 120, Art.-No Compensation Waler TTR85, Art.No Tie Rod (Available in all lengths) Base Plate PPS, painted, Art. No Push Pull Props (Available in 3 sizes) Prop Connector TT, Art. No Wing Nut Plate DW15, Art. No Compensation Waler TTR85, Art.No Stop End Tie light, Art. No

6 Steel Panel Formwork TRITEC light The System WALLS, COLUMNS, FOUNDATIONS ALL FORMED WITH ONE UNIVERSAL SYSTEM. Walls Columns Foundations TRITEC LIGHT THE ALL-PURPOSE SYSTEM FOR MANY APPLICATIONS SUCH AS: Wall formwork Foundations Column Formwork Shaft Formwork Beam Formwork Stop-end shuttering Wall conjunctions Inner Corners Outer Corners 6

7 TRITEC light-panels ROBUST AND SOLID The formwork panel frame consists of special closed steel profiles combined with 18 mm cross-bonded Birch plywood. Your choice of any other plywood is possible. EASY TO HANDLE Due to the significantly small amount of components used, searching for many little components is unnecessary, storage is easy and delays on site are reduced to a minimum. MATERIAL SUITABLE FOR THE CONSTRUCTION SITE The steel panel frames have a profile height of 120 cm and a width of 60 mm. The Alignment Panel Coupler APC fits onto the corrugated edge without any difficulty. The frame is sturdy and the powder-coated surface is easily cleaned. The guard cover at panel top-ends protects the plywood against damage. The 18 mm film coated plywood consists of Birch veneer and is made to meet high demands. Cross-bonded and glued according to BFU 100 with a Phenol resin coating 220 g/m². Panels are available in 4 heights and 4 widths. Associated system accessories such as the Push-Pull Props, Walers, Walkway Brackets can be fastened to the integrated track. Corners are stiffened with steel plates. 90 cm 72 cm 60 cm 30 cm THE SYSTEM TRITEC LIGHT Consists of 4 panel widths Only one formwork clamp Superb weight to strength ratio up to 60kN/m² Multi-bonded Birch plywood, 220 g Longevity SERVICES Trade-in Financing Application technique Logistics 7

8 TRITEC light-panels Panels 300: Height Width Weight Article TRITEC -light Panel 300 cm 90 cm 105,04 kg TRITEC -light Panel 300 cm 72 cm 89,49 kg TRITEC -light Panel 300 cm 60 cm 80,18 kg TRITEC -light Panel 300 cm 30 cm 55,56 kg Panels 270: Height Width Weight Article TRITEC -light Panel 270 cm 90 cm 95,84 kg TRITEC -light Panel 270 cm 72 cm 81,48 kg TRITEC -light Panel 270 cm 60 cm 72,94 kg TRITEC -light Panel 270 cm 30 cm 50,32 kg Panels 150: Height Width Weight Article TRITEC -light Panel 150 cm 90 cm 59,30 kg TRITEC -light Panel 150 cm 72 cm 49,80 kg TRITEC -light Panel 150 cm 60 cm 44,50 kg TRITEC -light Panel 150 cm 30 cm 29,60 kg Panels 120: Height Width Weight Article TRITEC -light Panel 120 cm 90 cm 50,10 kg TRITEC -light Panel 120 cm 72 cm 41,80 kg TRITEC -light Panel 120 cm 60 cm 37,32 kg TRITEC -light Panel 120 cm 30 cm 24,42 kg All panels are also available as hot-dip galvanised-version.

9 Corner Panels INNER CORNER PANELS 90 Used to form 90 angles on inner corners of the concrete wall Powder-coated panels Height Width/Side Weight Article TRITEC light Inner Corner cm 30 cm 86,14 kg TRITEC light Inner Corner cm 30 cm 78,50 kg TRITEC light Inner Corner cm 30 cm 44,90 kg TRITEC light Inner Corner cm 30 cm 36,70 kg ARTICULATED CORNER For use in the case of oblique angles from , internally and externally Hinged corner panels can be made 30 cm panels Height Width/Side Weight Article TRITEC light Articulated Corner cm 30 cm 90,40 kg TRITEC light Articulated Corner cm 30 cm 81,80 kg TRITEC light Articulated Corner cm 30 cm 47,10 kg TRITEC light Articulated Corner cm 30 cm 38,20 kg SHAFT PANEL Used for forming lift shafts from the inside and manholes By means of a spindle, each leg of the corners contracts by 30 mm and the shaft unit can be easily stripped and lifted Height Width/Side Weight Article TRITEC light Shaft Panel cm 30 cm 130,00 kg TRITEC light Shaft Panel cm 30 cm 120,00 kg TRITEC light Shaft Panel cm 30 cm 92,00 kg TRITEC light Shaft Panel cm 30 cm 72,50 kg

10 TRITEC light-accessories ALIGNMENT PANEL CLAMPS APC: Tightly fastens, aligns and makes panels flush with each other. FORMWORK CLAMP APC LIGHT, ART.-NO Connects all light-panels easily and cost-efficiently FORMWORK CLAMP APC, ART.-NO For the attachment of light outer corners or wall offsets up to 10 cm to connect the TRITEC light elements with TRITEC elements COMPENSATION WALER TTR85, ART. NO Universally operational waler made of high-quality steel Bridges length extensions Increases rigidity of inter-panel connections Transfers tie forces The walers are fixed to the struts on the panels by means of its attached couplers which cannot be lost. The necessary functional holes have been integrated in the vertical and horizontal struts on the steel frame. High-quality powder-coating STOP-END-TIE, ART.-NO To take the forces on the stop-end shuttering panels 10

11 TRITEC light-accessories LIFTING HOOK LIGHT, ART. NO To transport the vertically hanging panels Certified carrying Load: 900 kg galvanised WALKWAY BRACKET TTW 80, ART. NO For the assembly of a secure, 80 cm wide working platform Easily mounted to the vertical or horizontal struts High-quality powder-coating WALKWAY BRACKET TTW 120, ART. NO For the assembly of a secure, 120 cm wide working platform Easily mounted to the vertical or horizontal struts High-quality powder-coating 11

12 TRITEC light-accessories PUSH-PULL PROPS Aids in erection Allows the simple alignment and adjustment of wall and column formwork Absorbs wind forces High-quality powder-coating Typ Extension Range Article Weight PPS I 2,05 to 2,95 m ,00 kg PPS II 2,91 to 3,80 m ,10 kg PPS III 4,60 to 6,00 m ,80 kg Kicker PPS I 1,08 to 1,40 m ,20 kg Kicker PPS II 1,28 to 1,90 m ,10 kg Kicker PPS III 2,05 to 2,94 m ,00 kg Kicker PPS I Kicker PPS II Kicker PPS III PANEL ERECTION WITH PUSH-PULL PROP PPS: Adjustment with Push Pull Prop and Prop Connector (Art. No ) Adjustment by means of Push Pull Props 12

13 TRITEC light-accessories TIE RODS DW 15 Supplied in four standard lengths, additional lengths are available upon request Max. Permissible load of the Tie Rod DW 15 and DW 20, are according to DIN WING NUT PLATE DW 15 13

14 TRITEC light Flex-Panels TTF Only one panel for different usages. This minimizes the amount of different parts and allows mobility and fast assembly of panels. ECONOMIC DESIGN: Column Formwork Outer Corners Stop-end shuttering Wall connections Height Width Weight Article TRITEC light-ttf-panel 300 cm 72 cm 96,00 kg TRITEC light-ttf-panel 270 cm 72 cm 87,43 kg TRITEC light-ttf-panel 150 cm 72 cm 54,18 kg TRITEC light-ttf-panel 120 cm 72 cm 46,25 kg TRITEC LIGHT TTF-PANELS IN USE AS MULTI-PANELS Wall connections A Multi Panel with pre-drilled holes and a 3-hole grid at anchor level, can be delivered in any height. ECONOMIC DESIGN Outer corners Stopends Wall connections TTF-Panels Outer corner Stop-End-Tie Light Stopends 14

15 TRITEC LIGHT TTF-PANELS USED FOR COLUMN FORMWORK Lateral holes are drilled (when used as column formwork for cross sections with 50 mm increments) adjustable from 200x200 to 600x600 mm The panels are connected together by means of Tie Bolts and Wing Nut Pivot Plates. Unnecessary tie holes are sealed off with plugs. Examples Detail of fixing the TTF-Panels with column tie bolt 15

16 TRITEC light-foundations Foundations can be formed with panel heights of 120 and 150 with TRITEC light. Top tie bracket Foundation tie clamp tls 16

17 Special sizes, choice of color and plywood All TRITEC light elements can be custom made any special size upon request. For example GHI can make all TRITEC light elements to suit the colours in your logo powder coated and without extra charge! Select all standard RAL colours. Galvanized casing is available at an additional cost. TRITEC light colors TRITEC light galvanised You have the choice of four different plywood-versions. For a small fee you can get the panels with plastic coated plywood, with plastic board or with Sonoboard instead of the cross-bonded birch plywood. 17

18 PLANNING LOGISTICS SERVICE Prompt quotations and comprehensive advice CAD planning, production of formwork plans Swift, on-time, reliable delivery - worldwide We take complete charge of logistics and storage Training and instructions to your personnel on site Cleaning, maintenance and repairs using new original parts Contact/Manufacturer