MOBILITY PLUS. By ITEMDesign Works

Transcription

1 By ITEMDesign Works Range of Mobility Plus General Characteristics Scheme Mobility Plus and Surface finishes available Accessories Ecodesign and Normes... 0 Mobility Desks with fixed height How to order desks with access to wiring... Straight desks... 2 Auxiliary desks and Auxiliary sides... 2 Management and meeting desks... Mobility desks with electronic elevation - stages How to order desks with access to wiring... 4 How to order electronic elevations for desks... 5 Straight desks º desks... 6 Double desks... 6 Management and meeting desks... 7 Caddy Video-Conference... 8 Optional accessories for Mobility desks Accessories for single desks... 2 Accessories for double desks... 2 Table top dividers on single desks Table top dividers on double desks... 24

2 Mobility Programme COMBINATION OF FEET, COLUMNS AND BRACKETS Below is a graphical example of the colour combinations of brackets, columns and legs, for single, fixed and mechanical adjustable desks. White frame finish: Aluminized frame finish: Black frame finish: Bracket: White Bracket: Aluminized Bracket: Black Column: White Column : Aluminized Column: Black Feet: Polished or White Feet: Aluminized Feet:Polished MOBILITY - FIXED DESKS - 74 cm Height Straight desks - cm Auxiliary sides Management and meeting desks MB MB4 MB5 MB5 (only for 60cm and cm desks) MB6 MB47 COMBINATION OF FEET, COLUMNS AND BRACKETS Below is a graphical example of the colour combinations of brackets, columns and legs, for single electronic elevation desks. White frame finish: Aluminized frame finish: Bracket: White Bracket: Aluminized Column: White Column : Aluminized Feet: Polished or White Feet: Aluminized MOBILITY - DESKS WITH ELECTRONIC ELEVATION + SENSE - THREE STAGES - 65 to 29 cm Height Straight desks - cm Twin desks - 64 cm Management and meeting desks MB6 MB64 MB65 MB67 64 MB MB MB66 MB647 20º desks - 25x cm MB64 02

3 Sample Layouts Use with individual operative desks and 20º desks Use with management and meeting desks Use with 20 degree desks and triple 20 degree desks ,5 64,5 56,5 64,5 64,

4 Technical features FEATURES 2b SENSE NEW SECURITY SYSTEM New anti-collision System it is included in all electric height adjustable Mobility PLUS desks. It is based in physic sensors placed in the leg. This system allows to have a sensitive response to any collision both when the desk is going up and going down. The system will immediately stop. 4a 2b 2a 4b 2 4 DESCRIPTION Moulded aluminium support plate.: Beams: Fixed desk: Steel tube 60x50mm section and e:2mm. Height adjustable desk: 2 steel tubes 50x20mm section and e=2mm, separated by 20mm to house the electric motor. Fixing System between legs and beams, integrated in the support plate. Leg: 2b Fixed desk: extruded aluminium 0x mm and e=2,5mm (detail) Electric height adjustable desk + SENSE: Steel tube telescopic leg, composed by sections: 70x70 mm, 65x65 mm and 60x60 mm and e=,5mm and extruded aluminium cover 0xmm and e=2,5. Black ABS profile Trim, fixed to the leg. Feet: 4b 2a 4a Individual desks: Moulded aluminium feet with moulded PP levelers in black including anti-slip sole. Twin desks: moulded PP levelers in black including anti-slip sole. 04

5 Technical features FEATURES SCHEME TYPE LEG ELEVATION RANGE STAGES Single desk T Fixed h= 74 cm Stage Single desk T Electronic + SENSE h= 65 / 29 cm (EN 527-:20) Stages Twins H Electronic + SENSE h= 65 / 29 cm (EN 527-:20) Stages Meeting T Fixed h= 74 cm Stage Meeting T Electronic + SENSE h= 65 / 29 cm (EN 527-:20) Stages LEG TYPE FINISHES Melamine Glass 00 WHITE 8 MAPLE LIME OAK 07 CHESTNUT 4 DARK OAK WHITE BLACK HPL Structure 20 WHITE 28 MAPLE 27 CHESTNUT Compact laminated 0 WHITE 5 MAPLE 6 CHESTNUT 05

6 Technical Profile ECODESIGN SLIDING DESK TOP Sliding desk top. Total accessibility to the electrification tray. It enables the sliding of desktops for twin and single desks towards the user, allowing easy access to the electrification tray. There is an option for a bigger twin cable tray with metal cover to be used as a cable houser and drive cables through multiple cable trays. ACCESSORIES Electrification trays for individual and twin desks Central electrification tray for twin desks Flip-up cable access T PUSH LATCH SPLIT desktop divider Upholstered and accoustic desktop screens 20/40 mm.with soundproofing properties Polistirene Extensión Cables Steel or melamine modesty panels Control with digital programmable module UP & DOWN control included in ALL desks with electronic elevation. 06

7 FEATURES NOISE POLLUTION IN THE OFFICE REFERENCE VALUES Generally, the noise pollution levels in an office do not constitute a hearing risk for the people, however it can generate inconveniences that may affect concentration, work performance or attention span. Acoustic comfort is the sound level that does not disturb and does not cause direct damage to health. The acoustic comfort is better in offices with high level of accoustic products. External noises Working teams Conversations and phone noises ORIGIN OF ACCOUSTIC POLLUTION Air conditioning and heat Human noises There is no mandatary accoustic legislation. Nevertheless, according to the Technical Guide from RD 488/997, April 4, noise should not exceed 55 Db (A) when the user is doing difficult tasks. Basic building legislation Professional office Offices CAUSES OF ACOUSTIC POLLUTION 88 db(a) 40 dba 45 dba Attitude of the user. Does he accept it or not. Physical features of noise Types of tones. Pure tones (those that do not vary in frequency) more annoying than the compounds. Even more when aired on audible frequencies ( Hz) Frequency. More annoying high frequencies than low ones. Randomness. The variation in noise annoyance increases. Non physical characteristics. The most annoying noise is the less predictable noise. Type of activity. Higher discomfort when more concentration is needed. HOW TO CONTROL NOISE SOURCES PHYSICAL FEATURES OF NOISE Sound pressure level Frequency Variability NON PHYSICAL FEATURES OF NOISE Predictability INCONVENIENCES ACTIVITY How difficult the task is USER S FEATURES Attitude Controlling noise within teams by: Installing printers and faxes in remote rooms and areas Using silent office equipment, by adding insulated housing Lower the intensity of telephones and communication devices Use doors with spring systems... Control the noise within ventilation and air conditioning Avoid noise transmission between units using insulating the walls Creating accoustic barriers by: Using accoustic materials in the walls, ceilings and floors Using surfaces that do not reflect noise too much. (Reverberation Time seg) Placing accoustic panels and screens between desks and workstations Provide office furniture that improves the acoustic behavior of space, hollow ceilings, carpeted floor, upholstered chairs... Respect the local occupancy according to its volume and its use Achieve quiet habits of conduct and communication 07

8 FEATURES ACCOUSTIC SCREEN 40MM THICK mm thick Chipboard Foam thickness e= 0 mm and 60 Kg/m density (etotal= 40 mm) Different fabrics available glued using water glue. - Optional accoustic or fire resistant fabrics for projects. Actiu fabric range GROUP M MELANGE Medium accoustic properties. Fire resistant fabric. GROUP T Low accoustic properties GROUP F ATLANTIC Good accoustic properties 5 4 Low density Polyethylene (PE) bumper edge clipped using glue, available in white, black and silver. 4 Aluminium White Black 5 Solid Injected aluminium or steel plates fixing brackets Accoustic absorbence ratio - UNE EN ISO Accoustic absorbence ratio for standard incidence (-) Frequence (HZ) Ratio 50 0, ,06 0,08 0,0 26 0, , 200 0, ,7 6 0, , ,8 Frequence (HZ) Ratio 60 0,2 0 0,24 0 0, , , , ,6 50 0, , , ,98 Accoustic absorbence ratio for standard incidence (-) 08

9 FEATURES ACCOUSTIC SCREEN 20MM THICK mm thick Chipboard Latex thickness e= mm and 0 Kg/m density (etotal= 20 mm) Different fabrics available glued using water glue. - Optional accoustic or fire resistant fabrics for projects. Actiu fabric range GROUP M MELANGE Medium accoustic properties. Fire resistant fabric. GROUP T Low accoustic properties GROUP F ATLANTIC Good accoustic properties 5 4 Low density Polyethylene (PE) bumper edge clipped using glue, available in white, black and silver 4 Aluminium White Black 5 Solid Injected aluminium or steel plates fixing brackets Accoustic absorbence ratio - UNE EN ISO Accoustic absorbence ratio for standard incidence (-) Frequence (HZ) Ratio 50 0, ,04 0,07 0, , , 200 0, , 6 0, , ,7 Frequence (HZ) Ratio 60 0,8 0 0,20 0 0, , , , , , , , ,5 Accoustic absorbence ratio for standard incidence (-) 09

10 CLASE E STANDARD - NORMA EUROPEA Technical Profile NORMS MATERIALS Maximum use of materials to eliminate and minimize scraps. Use of recyclable and recycled materials in those components that do not affect the functionality and durability. 56,7% RECYCLED MATERIALS PRODUCTION Maximum optimization of energy use. Minimal environmental impact. Last generation technological systems. Zero discharge of wastewater. No VOC coatings. Processes free of heavy metals, phosphates, OC and COD. % RECYCLABLE ALUMINIUM, STEEL & WOOD TRANSPORT Detachable systems. Volumes that facilitate the optimization of space. Maximum reduction of energy consumption by transport. % RECYCLABLE PACKAGE AND THINNER FREE USE Quality and warranty. Long lasting. Replacements available. EASY TO CLEAN AND MAINTAIN DISPOSAL Waste reduction. Supplier-manufacturer packaging reuse system. Components are easy to be separated. Inks in packaging are water-based, without solvents. 97,4% RECYCLABLE MATERIALS CERTIFICATES AND REFERENCES The different programmes get points in different environmental categories to get the LEED certificate (sustainability, material and resources, water, energy and atmosphere, inner environment quality, innovation and design). E ACTIU PRODUCE Y UTILIZA TABLEROS EN 986 The mark of responsable forestry PEFC/ PEFC Certificate EN ISO 4006:20 UNE-EN ISO 900:2008 UNE-EN ISO 400:2004 ECODESIGN Certificate ISO 900 Certificate ISO 400 Certificate E Certificate by EN 986 NORMS has passed tests done in our technical department as well as the tests done in AIDIMA the Technological Institute for furniture. The tests correspond to: - UNE: EN 527-:200. Office furniture. Work desk. Part : Dimensions. - UNE: EN 527-2:200. Office furniture. Work desk. Part 2: Mechanical safety requirements - UNE: EN 527-:200. Office furniture. Work desk. Part : Test methods for determining stability and mechanical strength of the structure 0