A.DAPT A.DAPT BOLLARDS CUSTOM SHAPES. A.Dapt Inline Bollard. A.Dapt integrated in wall. A.Dapt customized. A.Dapt Woodline

Transcription

1 A.DAPT

2 A.Dapt integrated in wall A.Dapt customized A.Dapt Inline Bollard A.Dapt Woodline PUNKTUM - a contemporary collection from Noral designed by the French designer Jean Pierre Vitrac. Behind each design lies a desire to challenge your creativity and give you freedom to create beautiful settings by night or daytime while enjoying the peace of mind the Noral quality offers. A.DAPT Adaptability to the environment or architecture is important features in this new built-in fitting with adjustable light direction. Traditional built-in fittings often feature fixed light direction and put many limitations on which shapes and materials where it can be incorporated. The A.Dapt from Noral aims at overcoming many of these limitations. It has been designed to be built into a wide range of shapes - natural stone, concrete or even stone sculptures or walls are just some examples. A.DAPT BOLLARDS Imagine the freedom to incorporate light points into not only walls or bollards, imagine using natural materials and shapes - your imagination is the limit. Imagine A.Dapt from Noral. CUSTOM SHAPES Design: Jean Pierre Vitrac

3 LIGHT SOURCES/OPTICS IGHT SOURCE REFLECTOR REFLECTORS LIGHT SOURCES/OPTICS LIGHT SOURCE T Y P E W Cap Anodised aluminium MT MT 35 G12 70 G G12 Mesh MT FSQ 10 G24d1 Frosted glass FSQ PHOTOMETRICS A.Dapt features an adjustable angle light opening, the angle of this opening and also whether the luminary is installed with horizontally or vertical light opening will affect the light distribution. The examples given in this document are calculated using standard reflectors and glass and MT 35 W and FSQ 10 light source. For accurate calculation and optimal choice of optic and light source for a specific installation we suggest you contact your nearest Noral office or Noral Distributor. Our light specialists will give advice and provide you with the required data using the Relux light calculation software. MATERIALS MECHANICAL ELECTRICAL Housing - extruded and gravity cast AlSi 12 aluminium alloy. Lens - tempered clear or frosted glass IK10 (20 Joule). Reflector - sheet aluminium. Hardware - Stainless steel. Coating - UV-resistant polyester powder coating. Surface treatment - Polyseal system. Protection against aggressive concrete - rubber sheet covering bottom Optical unit - sealed to IP 55 (EN 60598). Reflector - Symmetric. Ballast compartment - sealed to IP 55 (EN 60598). Nominal line voltage - 230V, 50Hz. Insulation - Class I Electrical components - required gear for light source fitted inside. Fuse system - not supplied. Light source - not supplied MAINTENANCE INSTALLATION COLOURS Maintenance and change angle of the light opening require product to be extracted by release of one captive screw. Re-lamping - twist and open access from the side. Ballast compartment - accessed from the side. An integrated support in the base is used to fix the housing to the structure. Cabling - supplied with cable ready connected with quick coupling in the luminaire. Terminal suitable for through wireing of 3 x 2,5mm2 cable. Suitable in/out cable Ø max 5 mm. Required dimensions for integration in custom structures - H = X mm, D = Y mm, W = Z mm including necessary height for mounting and maintenance and corrosion insulation Standard - Metallic Silver, Sable Noir, Bronze. Other colours - on request.

4 A.DAPT A.DAPT BOLLARDS Dimensions of A.Dapt Inline are approximate due to manufacturing process and the nature of the concrete A.Dapt Inline A.Dapt Woodline

5 A.DAPT Frosted Anodised aluminium Aluminium mesh A.DAPT BOLLARDS Woodline Woodline R Inline CUSTOMIZED A.DAPT INTERGRATIONS (PROJECTS) Noral would be pleased to help you create your own tailor made A.Dapt configuration. Please contact us for furhter information.

6 LOW LIFETIME COSTS VALUE FOR MONEY A.DAPT Contemporary concept for creation of light points as well as points of light sculptures Complete adaptability Integrate it in walls, constructions or materials of nearly any shape or kind Design your own or chose among three standard supports for free standing installation. Range of reflectors available - anodised aluminium, mesh or perforated for creation of light effects in any chosen direction. Clear glass when light performance is required Frosted lens for creation of atmosphere Low installation costs Pre-installed cables of suitable lengths optionally with quick coupling Integrated easy to install base can be fitted during construction. Together with cabling and quick coupling (option) final installation is quick and easy. Just connect the quick coupling, insert the fitting and fasten one screw. The adjustable light opening ensure just the right light effect is created and in a multiple installation a harmonious and complete light setting can easily be achieved. Durability AlSi12 alloy based on recycled pure aluminium is used for strength and prevents corrosion caused by impurities in the metal. UV-resistant polyester powder coating prevents yellowing from UV-rays better than conventional epoxy powder coating. Polyseal surface treatment developed for the aviation industry ensure excellent adherence between metal and polyester coating Tempered glass lens (>IK10-20 Joule) for lasting appearance and protect against vandalism. Insulating insert for extra protection against corrosion when mounted in concrete Low maintenance and operation costs Suitable for modern energy efficient light sources Twist and pull lock for easy access when re-lamping Stainless steel used in hardware and crews ensures trouble free maintenance Design: Panorama design/head of Type. Photos: Damian Henisch//Bjørn Celén. Layout/Print: PDC Tangen Noral Ltd. Unit 1 The Oaks Mill Farm Courtyard, Stratford Road MK19 6DS, Beachampton, Bucks England T: +44 (0) F: + 44 (0) E: lighting@noral-gb.co.uk Noral ASA P.O.Box 159, N-1871 Ørje Norway T: F: E: noral@noral.no