PROGRAMME OF WORK : STANDARDS

Transcription

1 Report : Of /SC (SABS 470) 4.0 Concrete poles for telephone, power and lighting purposes Concrete retaining blocks (SABS 54) 4.0 Concrete roofing tiles (SABS 676).05 Reinforced concrete pressure pipes (SABS 677).05 Concrete non-pressure pipes (SABS 90) Steel bars for concrete reinforcement (SABS 97).0 Precast concrete kerbs, edgings and channels (SABS 975).07 Prestressed concrete pipes (SABS 986).0 Precast reinforced concrete culverts (SABS 08) Aggregates from natural sources - Aggregates for concrete (SABS 090) 94 (SABS 94).0.0 Aggregates from natural sources - Fine aggregates for plaster and mortar Precast concrete manhole sections and components (SABS 7).04 Prefabricated concrete components for fences (SABS 879).0 Precast concrete suspended slabs CO-/EN 50-:009, IDT CO- : Sampling CO- CO-: Making and curing of test specimens

2 Report : Of 7 08/SC 0 00-CO-7 00-CO-7 00-CO-9 00-CO-0 00-CO- 00-CO-4/EN 90-4:, IDT 00-CO-6 00-CO- 00-CO- 00-CO- 00-CO-6 00-CO-8 00-CO-8 00-CO-4 00-CO-5 CO-7: Density of compacted freshly mixed concrete. CO-7: Initial drying shrinkage and wetting expansion of concrete CO-9: Mortar tests - Compressive strength of mortar Civil engineerings test methods Part CO-0:Mortar tests - Initial drying shrinkage and wetting expansion of mortar Part CO-: Consistence of freshly mixed concrete - Slump test CO-4: Compressive strength - Specification for testing machines CO-6: Tensile splitting strength of hardened concrete Part CO-: Dimensions, tolerances and uses of cast test specimens Part CO-: Compressive strength of hardened concrete Part CO-: Mixing fresh concrete in the laboratory CO-6: Consistence of freshly mixed concrete - Flow table test CO-8: Air content of freshly mixed concrete - Pressure method CO-8: Density of hardened concrete Part CO-4: Consistence of freshly mixed concrete - Vebe test CO-5: Flexural strength of hardened concrete

3 Report : Of 7 08/SC 0 00-CO /EN 004:007, IDT /EN 50-:00, IDT,. /EN 50-:00, IDT,. 00-C0-9/EN 50-8:00, IDT,. CO-5: The drilling, preparation, and testing for compressive strength of cores taken from hardened concrete Adhesives for tiles - Requirements, evaluation of conformity, classification and designation Testing fresh concrete - Part :Self-compacting concrete - J- ring test Testing fresh concrete - Part : Self-compacting concrete - Sieve segregation test Testing fresh concrete - Part 8: Self-compacting concrete - Slumpflow test /IS 894:00, IDT,. Pulverized fuel ash-lime bricks- Specification C0-5/EN 50-4:009, IDT,. Testing of fresh concrete Part 4:Degree of compactibility /EN 50-0:00, IDT,. /EN 50-9:00, IDT,. Testing fresh concrete - Part 0: Self-compacting concrete - L box test Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test /SC 0 7 (SABS 7) Fasteners for roof and wall coverings in the form of sheeting (SABS 07) The design, testing and installation of self-supporting metal cladding /SC 0 7 Glass and plastics in furniture (SABS 07) 5 The installation of glazing in buildings /EN 57-:0, IDT,. (SABS EN 57-) silicate glass products Part : Definitions and general physical and mechanical properties

4 Report : Of 7 08/SC /EN 57-:0, IDT,. (SABS EN 57-) 5057-/EN 57-:0, IDT,. (SABS EN 57-) /EN 57-4:0, IDT,. (SABS EN 57-4) /EN 57-5:0, IDT,. (SABS EN 57-5) silicate glass products Part : Float glass silicate glass products Part : Polished wire glass silicate glass products Part 4: Drawn sheet glass silicate glass products Part 5: Patterned glass /SC AG4 00-AG 00-AG5 00-GR 00-GR 00-GR5 00-GR0 00-GR0 00-GR AG4: Determination of the flakiness index of coarse aggregate AG: Determination of the soundness of mudrock aggregates AG5: Determination of rock durability using 0 % FACT (fines aggregate crushing test) values after soaking in ethylene glycol GR: Wet preparation and particle size analysis GR: Dry preparation and dry particle size analysis of gravels and sands GR5: Wet preparation and airdrying of samples for plasticity index and hydrometer tests GR0: Determination of the onepoint liquid limit, plastic limit, plasticity index and linear shrinkage GR0: Determination of the moisture content by oven-drying GR: Determination of the maximum dry density and optimum moisture content of laboratory mixed cementitiously stabilized materials

5 Report : Of 7 08/SC GR5 00-GR4 00-GR50 00-GR5 00-GR5 00-GR5 00-GR54 00-GR55 00-GR GR5: Determination of in-place dry density (sand replacement) GR4: Determination of the California bearing ratio of lime treated materials GR50: Preparation, compaction and curing of specimens of laboratory mixed cementitiously stabilized materials GR5: Sampling, preparation, compaction and curing of field mixed freshly cementitiously stabilized materials including the determination of the maximum dry density and optimum moisture content GR5: Sampling and preparation of cored specimens of field compacted, matured, cementitiously stabilized material GR5: Determination of the unconfined compressive strength of compacted and cured specimens of cementitiously stabilized materials GR54: Determination of the indirect tensile strength of compacted and cured specimens of cementitiously stabilized materials GR55: Determination of the wet-dry durability of compacted and cured specimens of cementitiously stabilized materials by hand brushing GR56: Determination of the wet-dry durability of compacted and cured specimens of cementitiously stabilized materials by mechanical brushing

6 Report : Of 7 08/SC GR57 00-GR58 00-GR (SABS SM 854).0.0 GR57: Determination of the initial stabilizer consumption of soils and gravels GR58: Determination of the cement or lime content of stabilized materials by means of the backtitration (acid base) method GR 60: Determination of sulfate content of a soil paste and ground water ph Value of fines in aggregates for base-courses (SABS SM 40) Electric conductivity of fine aggregate Part-GR6 Qualitative tests for carbonate, chloride and sulfate salts in soils, gravels, graded crushed rock and water. Determination of the ph of water, soil, gravel and graded crushed rock for construction purposes /SC Design, selection and installation of geomembranes /SC (SABS 0) 95-4 Polymer film for damp-proofing and waterproofing in buildings Part : Monofilament and co-extruded products The waterproofing of buildings (including damp-proofing and vapour barrier installation) Weldable polymer membranes used to waterproof flat roofs, basements, tanks, gutters and waterways /SC 07 7 (SABS 7) (SABS 449).0 Ceramic wall and floor tiles

7 Report : Of 7 08/SC AS4 00-AS5 00-AS 00-AS4 00-AS5 SATS 08 AS4: Determination of the moisture susceptibility of asphalt mixes (modified Lottman) Part AS5: Determination of the dynamic creep of asphalt AS: Determination of the compaction characteristics of asphalt mixes using the Superpave gyratory compactor AS4: Determination of the indirect tensile strength of asphalt Part AS5: Recovery and extraction of bituminous binder from an asphalt mix ED Performance Grade (PG) Specifications for Bitumen in South Africa /SC 09 /ASTM D 608:08, IDT Liquid applied acrylic coating used in roofing /SC 0