PB-PRO Heavy Duty Sleeve Anchor

Transcription

1 GENERAL INFORMATION GENERAL INFORMATION PB-PRO Heavy Duty Sleeve Anchor PRODUCT DESCRIPTION The PB-PRO is a large iameter torque controlle, heavy uty sleeve anchor esigne for concrete applications. Suitable base materials inclue normal-weight concrete. The anchor is manufacture with a zinc plate carbon steel bolt, sleeve, cone an expansion clip an plastic compression ring. The PB-PRO has a low profi le fi nishe hex hea. GENERAL APPLICATIONS AND USES Structural connections, i.e., beam an column anchorage Safety-relate attachments an tension zone applications Interior applications / low level corrosion environment Heavy uty applications FEATURES AND BENEFITS + Consistent performance in high an low strength concrete + High shear loa capacity + Patente plastic retainer nut prevents loosening components uring transport as well as spinning in the rill hole + Compression zone in sleeve clamps fi xture to the base material APPROVALS AND LISTINGS Teste in accorance with ASTM E488 GUIDE SPECIFICATIONS CSI Divisions: Concrete Anchoring an Post Installe Concrete Anchors Expansion anchors shall be PB-PRO as supplie by DEWALT, Towson, MD. Anchors shall be installe in accorance with publishe instructions an the Authority Having Jurisiction. SECTION CONTENTS General Information...1 Material Specification...2 Installation Instructions...2 Installation Information...3 Performance Data...4 Orering Information...5 HEAD STYLES PB-PRO ASSEMBLY Finishe Hex Hea ANCHOR MATERIALS Zinc plate carbon steel bolt, washer, cone, sleeve, an expansion clip; assemble with a plastic compression ring an retainer nut ANCHOR SIZE RANGE (TYP.) 16 through 20 SUITABLE BASE MATERIALS Normal-weight concrete TECH MANUAL 2017 DEWALT REV. A 1

2 MATERIAL SPECIFICATION MATERIAL SPECIFICATION Part No. Designation Material Protection 1 Threae bolt Meium Carbon Steel (Grae 8.8) Zinc plate (5 µm) 2 Washer Steel Property class 8.8 acc. to EN ISO 7093 Zinc plate (5 µm) 3 Distance sleeve Meium Carbon Steel Zinc plate (5 µm) 4 Compression ring Plastic (HDPE) - 5 Expansion sleeve Meium Carbon Steel Zinc plate (5 µm) 6 Cone nut Meium Carbon Steel Zinc plate (5 µm) 7 Retainer nut Plastic (HDPE) - INSTALLATION INSTRUCTIONS 1. Using the proper rill bit size, rill a hole into the base material to the require epth. 2. Remove ust an ebris from the hole uring rilling (e.g. ust extractor, hollow bit) or following rilling (e.g. suction, force air) to extract loose particles create by rilling. Hex Hea Compression Ring 4 3. Drive the anchor into the hole through the fixture at least to the minimum require embement epth. 3 Cone Nut Washer Distance Sleeve Expansion Sleeve Retainer Nut 2 4. Tighten the anchor with a torque wrench by applying the require installation torque Tinst. TECH MANUAL 2017 DEWALT REV. A 2

3 INSTALLATION INFORMATION INSTALLATION INFORMATION INSTALLATION DATA Anchor iameter Description Notation Unit Hea Height - Washer Outter Diameter - Internal bolt iameter - Minimum Specifie Yiel Strength f y MPa (ksi) Minimum Specifie Ultimate Steel Strength f uta MPa (ksi) rill bit iameter Diameter of hole clearance in fixture Minimum Embement Depth Effective embement epth Minimum hole epth Minimum member thickness Minimum spacing Corresponing ege istance at smin Minimum ege istance Corresponing spacing at cmin Installation torque bit h hnom hef ho hmin smin for c cmin for s Tinst 24 (in) (0.94) 10.0 (in) (0.39) 50 (in) (1.97) 16 (in) (0.63) 640 (92.8) 800 (116) 24 (in) (0.94) 26 (in) (1.02) (in) (5.04) 100 (in) (3.94) 155 (in) (6.10) 200 (in) (7.87) 130 (in) (5.12) 240 (in) (9.45) (in) (5.51) 230 (in) (9.06) PB-PRO Torque wrench socket size Nm (ft-lb) 130 (96) 28 (1.10) 12.5 (0.49) 60 (236) 20 (0.79) 640 (92.8) 800 (116) 28 (1.10) 31 (1.22) 125 (4.92) 180 (7.09) 250 (9.84) (5.51) 300 (11.81) (5.51) 300 (11.81) 200 (148) h min h o o T inst TECH MANUAL 2017 DEWALT REV. A h nom h ef length h 3

4 PERFORMANCE DATA PERFORMANCE DATA Ultimate Loa Capacities for PB-PRO in Normal-Weight Concrete 1,2 Anchor Diameter Minimum Embe. Depth (in) (5.04) 9,135 (40.9) 11,515 (51.6) Minimum Concrete Compressive Strength 2,500 psi 3,000 psi 4,000 psi 6,000 psi 8,000 psi 16,505 (74.0) 21,780 (97.6) 10,005 (44.8) 12,615 (56.5) 18,080 (81.0) 23,860 (106.9) 11,555 (51.8) 14,565 (65.3) 20,880 (93.6) 27,555 (123.5) 14,145 (63.4) 17,840 (80.0) 24,600 (110.3) 31,280 (.2) 16,337 (73.2) 20,600 (92.3) 24,600 (110.3) 31,280 (.2) 1. Tabulate loa values are for anchors installe in concrete. Concrete compressive strength must be at the specifie minimum at the time of installation. 2. Ultimate loa capacities must be reuce by a minimum safety factor of 4.0 or greater to etermine allowable working loa. Consieration of safety factors of 10 or higher may be necessary epening upon the application such as life safety or overhea. Allowable Loa Capacities for PB-PRO in Normal-Weight Concrete 1,2,3 Anchor Diameter Minimum Embe. Depth (in) (5.04) 2,285 (10.2) 2,880 (12.9) Minimum Concrete Compressive Strength 2,500 psi 3,000 psi 4,000 psi 6,000 psi 8,000 psi 4,125 (18.5) 5,445 (24.4) 2,500 (11.2) 3,155 (14.1) 4,520 (20.3) 5,965 (26.7) 2,890 (13.0) 3,640 (16.3) 5,220 (23.4) 6,890 (30.9) 3,535 (15.8) 4,460 (20.0) 6,150 (27.6) 7,820 (35.1) 4,085 (18.3) 5,150 (23.1) 1. Allowable loa capacities liste are calculate using an applie safety factor of 4.0. Consieration of safety factors of 10 or higher may be necessary epening upon the application such as life safety or overhea. 2. Allowable loa capacities are multiplie by reuction factors when anchor spacing or ege istances are less than critical istances. 3. Linear interpolation may be use to etermine allowable loas for intermeiate embements an compressive strengths. Spacing Reuction Factors - (F NS) Spacing Distance () Minimum Spacing smin () 130 Embement hnom () Spacing Reuction Factors - (F VS) Spacing Distance () Minimum Spacing smin () 130 Embement hnom () Ege Distance Reuction Factors - (F NC) Minimum Ege Distance cmin () Ege Distance () Embement hnom () Ege Distance Reuction Factors - (F VC) Minimum Ege Distance cmin () Ege Distance () Embement hnom () ,150 (27.6) 7,820 (35.1) TECH MANUAL 2017 DEWALT REV. A 4

5 ORDERING INFORMATION ORDERING INFORMATION Carbon Steel Hex Hea PB-PRO Cat No. Size (Diameter x Length) Drill Dia Length* St Box St Ctn PFM PB-PRO 24- x PFM PB-PRO 24- x PFM PB-PRO 28- x PFM PB-PRO 28- x PFM PB-PRO 28- x *Length measure from unerneath the washer to the en of the anchor. PB-PRO ACCESSORIES Metric Drill Bits SDS-MAX Carbie Drill Bits 4 Cutter Cat No. Size Drill Dia Length Useable Length St. Tube PPA M24x340x PPA M28x380x Installation Accessories Cat. No. Description Box Qty Han pump / ust blower 1 TECH MANUAL 2017 DEWALT REV. A 5