PRE-CAST YARDS / LIGHTWEIGHT PANEL / HOLLOW CORE / TELECOM MANHOLE / MRTC [SUB-WAY] / PLASTIC SHIMS

Transcription

1 PRE-CAST YARDS / LIGHTWEIGHT PANEL / HOLLOW CORE / TELECOM MANHOLE / MRTC [SUB-WAY] / PLASTIC SHIMS LONG PUN ENTERPRISE PTE LTD SPACER SPECIALIST SDN BHD FORMWORK PRODUCT CATALOGUE

2 PRE-CAST YARDS CATERPILLAR SPACER / RING SPACER Both the Caterpillar and Ring Spacer are developed for use of holding wire mesh and steel rebars on slabs specially in pre-cast yards. Its free size enable hold on any size of steel rebar and wire mesh. *CATERPILLAR SPACER CS - CS 30 / mm - CS mm 400 CS *CATERPILLAR SPACER WITH CLIP CCS - CCS 30 / mm - CSS CSS 30 mm *RING SPACER RS mm BRS 23 / 23mm RS 30 RS 35 35mm RS 40 40mm RS 45 45mm 22 RS - RS 45 / mm - 45mm SRS 23 MRS 23 BRS 23 23mm 23mm 23mm 700 COSMOS SPACER The Cosmos Spacer is another range of wall spacer for holding in place of the wire mesh or steel rebar with determined dimensions in relation to two vertical formwork faces. It shapes give it excellent stability during concreting, and more generally use in pre-cast yards for casting of wall panel with single layer wire or Rebars. CMS 95 *COSMOS SPACER CMS 70 25/70mm CMS 95 25/95mm 06-0 CMS /70mm 06-0 CMS 70

3 PRE-CAST YARDS SNAP OFF PLUG The Snap off Plug prevents the entry of foreign matters into the insert. Thus ensure a clean thread. It use by simply screw the fixing plug onto the insert and push into a pre-drilled hole on. The internal mould face for use where external mould face is inaccessible. PSP 12 - PSP 16 PLASTIC SNAP OFF PLUG PSP 12 M12 x 4mm PSP 16 M16 x 4mm *PLASTIC NIP PN 4 - PN 10 / 4mm - PN 4 4mm PN 5 5mm PN mm PN 6 6mm PN mm PN 7 7mm PN mm PN 10 PN - Black PN - White PN - Yellow PN - Red *PLASTIC NIP(LARGE) 23 PN-B Black 06mm PN-W White 06mm PN-Y Yellow 06mm PN-R Red 06mm

4 PRE-CAST YARDS PLASTIC NAME TAG The Plastic Name Tag is specially designed and manufacture with multicolours for use in pre-cast yards. The various colours are use to differentiate the different size of panels, slabs and etc, for easy identification when installation at site. PT PTT 1.6 PLASTIC SNAP OFF PLUG PT 1.2 PT 1.6 PTT x x 1.2mm 160 x 54 x 1.6mm 160 x 52 x 1.6mm PT 1.2 POS PLASTIC NAME TAG This is another range of Plastic Name Tag that has the same application with Plastic Name Tag, except it is for use on Reinforcement cage. PLASTIC NAME TAG[ANY COLOUR] 24 PTT 30 PTT 30 PTT 30 x 60mm 98 x 1.5mm MESH END CAPS Mesh End Caps are used for capping the end of the wire mesh to prevent the tip of the mesh from touching the formwork. MESH END CAPS Diameter MEC / 7mm mm MEC 7 *MEC 193 7mm 19.3mm 03mm 03mm

5 PRE-CAST HOLLOW CORE / TELECOM MANHOLE PVC FOR TELECOM MAHOLE *PVC COLLAR FOR TELECOM MANHOLE Length PVC PVC mm PVC mm PVC Collar & Cap PVC 184 PVC mm 185mm *PVC COLLAR CAP PVCC 109 Length I.D 109mm 100 PLASTIC END CAP FOR HALLOW CORE SLAB *PRE-CAST HALLOW CORE SLAB H400 E.P V2 E.P V4 80 E.P V5 180 E.P AV5 100 E.P V6 180 E.P V L.M H2 E.P V8 L.M H4 80 L.M H5 100 L.M H6 180 L.M H6 H1mm H0mm H2mm H300mm H400mm CAR PARK RING Car Park Rings are commonly used in multi-storey carpark ramps. The circular design provides sound friction, aesthetic appearance and consistent finishes. *CAR PARK RING 4pcs *CEMENT TROWEL pcs

6 PRE-CAST YARDS / LIGHTWEIGHT PANEL DUAL MESH SPACER The Dual Mesh Spacer (DMS) is generally used at pre-cast yards on application for two layer of mesh at determined cover 25mm or each, and for fine mesh 3 to 4mm. *DUAL MESH SPACER Height DMS 25 25mm 10 DMS 25A 25mm 3000 DMS 25B 25mm DMS 30 DMS 45 45mm DMS 90 90mm DSM 30 DSM 90 DSM 45 DSM 25A DSM 25 DSM 25B 26 FERRO-CEMENT SPACER / SMALL RING SPACER This range of spacer is called the Ferro Cement Spacer is specially use for casting the thickness Secondary Roof Slab at precast yards. It can hold a three layer wire mesh (Tied together combination of two layers of chicken mesh and one centre layer of wire mesh). Total height of Spacer 28mm and bottom cover at 7mm, 8mm and 9mm. * FERRO-CEMENT SPACER FCS 10 / Height FCS 10 Height 03-13mm *SMALL RING SPACER (FERRO) Height SRS 7 7mm SRS 8 8mm SRS 9 9mm SRS 10 SRS 8

7 PLASTIC SHIMS PLASTIC SHIMS The Plastic Shims are ideal for racking during erection of pre-cast concrete units. PLASTIC SHIMS PS 2 x x 2mm 4000 PS 2 - PS / 2mm - mm PS 3 x x 3mm 3000 PS 5 x x 5mm PS 10 x x PS x 35 x mm 0 *SMALL PLASTIC SHIM SPS 2 x 25 x 2mm 00 SPS 3 x 25 x 3mm 00 SPS 2 - SPS 15 / 2mm - 15mm SPS 5 x 25 x 5mm 4000 SPS 8 x 25 x 8mm 3000 SPS 10 x 25 x SPS 15 x 25 x 15mm HORSE SHOE SHIM The Horse Shoe Shims for around projecting bars and are ideal for packing during erection of precast concrete units. PLASTIC SHIMS 27 HSS 2 - HSS / Height 2mm - mm HSS 2 HSS 3 70 x 70 x 2mm 70 x 70 x 3mm 10 HSS 5 70 x 70 x 5mm HSS 7 70 x 70 x 7mm 800 HSS 9 70 x 70 x 9mm 0 HSS x 70 x 0 HSS 70 x 70 x mm 0 PANEL PADS (HORIZONTAL) The Panel Pads are stacking pads for precast units that prevent the curing stains often produced by stacking on timbers *PANEL PADS(HORIZONTAL) CORNER GUARDS FOR TRANSPORTING PRECAST The corner guards protect precast concrete parts against damage during transport. Made from plastic, reinforced edges, side lugs prevent chains, straps and ropes form slipping. Long life. *CORNER GUARDS FOR TRANSPORTING PRECAST 300

8 MRTC [SUB-WAY] DIXI SPACER The Dixi Spacer is developed for use in pre-cast yards for the support of the lower layer of wire mesh with bar diameter of 4mm and. This Spacer is used primarily for Concrete panel or area where no additional coat of plaster or paint is apply to. The sharp pointed tip of the spacer ensure that only a small bit could be visible after the removal of formwork. * DIXI SPACER DX 30, DX 304 /, 4-6mm DX 30 DX mm INSULATING CLIP This Spacer is specially developed for mean of holding two cross Rebar together without intact. It most popular use in the Mass Rapid Transit System (MRT) as a good prevention of current transmission from one Rebar to the other when lightning do occurs during rainy days. * INSULATING CLIP IC IC 1610 / - 16mm IC 1010 IC / 10/12mm 3000 IC /16mm 28 PLASTIC GROUT CAP & THREADED CAP The Plastic Grout Cap and Plastic Threaded Cap is specially developed for use to plug the end of underground G.I.Pipe. It enable easy and convenience cleaning or clearing of debris and waste when blockage occurs in pipe. * PLASTIC GROUT CAP Size PGC 63 - PGC 67 / SIze 63mm - 67mm PGC 63 PGC 67 63mm O.D x 28mm 67mm O.D x 32mm 0 0 * PLASTIC THREADED CAP PTC 46 Size 46mm x 15mm PTC 46 / Size 46mm