Record of Work Experiences Trade Qualifier or Pre Apprenticeship Credits CONCRETE FINISHER OCCUPATION

Transcription

1 Record of Work Experiences Trade Qualifier or Pre Apprenticeship Credits CONCRETE FINISHER OCCUPATION Note to Apprenticeship Applicants The work experiences on this form are for credit only and must have been performed prior to your registration as an apprentice. Education and Skills Apprenticeship and Trades Certification Division Applicant Information Name: Surname First Initial Address: / / / Telephone: ( ) Cell: ( ) address: Employer Information & Verification Note to Employer By completing the section below you are confirming that the hours indicated for the applicant are specific to employment in the Concrete Finisher Occupation. Verified By: Company Name Address: / / / Telephone: ( ) * CRA Business #: 9 Digits Employer or Representative Signature Employer or Representative (Print) Date of applicant s employment from: / / to: / / Month Day Year Month Day Year Total Hours of Employment the applicant worked in the Concrete Finisher Occupation: Hours * CRA - Canadian Revenue Agency ConFin_41-111_TQ-Work Experiences_

2 Please check the appropriate box: Trade Qualifiers Pre Apprenticeship Credits The signature of the Journeyperson following each of the required skills acknowledges the applicant has met the competencies in each of the skill areas according to the Industry Standard associated with this occupation. The signature of the Journeyperson following each of the required skills acknowledges the applicant has performed in each of the skill areas appropriate for this occupation. The Occupational Advisory Committee in the Concrete Finisher Occupation has identified the work experiences or skills listed below as those required for the occupation. Journeypersons must be certified in the occupation stated by this document. A Journeyperson in another occupation may sign certain sections if the skills are common to both occupations. Skills Required For Certification Journeyperson Signature Verified By Applicant Use tools and equipment Use hand tools Use power tools Use measuring equipment Use personal protective equipment (PPE) Organize work Interpret documentation Determine material requirements and quantities Communicate with others Schedule work procedures Maintain safe work environment Prepare site Inspect site Prepare sub grade Use formwork Construct concrete formwork Inspect formwork OCCUPATIONAL SKILLS ConFin_41-111_TQ-Work Experiences_

3 Skills Required For Certification Journeyperson Signature Verified By Applicant Install construction, isolation and expansion joints Strip forms CONCRETE PLACEMENT Place concrete Transport concrete Spread concrete Consolidate concrete Level concrete Establish elevations Screed concrete Bull float concrete Achieve tolerances CONCRETE FINISHING Float concrete Float concrete by hand Float concrete by machine Hand tool concrete Tool control joints Edge perimeter of slab Finish extruded concrete surfaces Trowel concrete Trowel concrete by machine Trowel concrete by hand Apply surface treatments to plastic concrete Broadcast products on concrete surface Apply surface retarder Texture concrete surface Top seed concrete surface Stamp concrete surface ConFin_41-111_TQ-Work Experiences_

4 Skills Required For Certification Journeyperson Signature Verified By Applicant CONCRETE CURING AND PROTECTION Cure concrete Wet cure concrete Chemical cure concrete Protect concrete Maintain desired temperature Place physical protection Saw cut control joints CONCRETE MODIFICATION REPAIR AND GROUTING Repair concrete Inspect to determine defects Remove materials Select materials and process of repair Prepare surface for repair Parge vertical surfaces Cut and core cured concrete Identify hazards Measure depth of cut Select cutting and coring equipment Apply surface treatments to hardened concrete Prepare surface Abrade surface to achieve architectural finish Apply seamless coatings Apply bonded and non bonded toppings to concrete Apply acid stain Select installation procedures Prepare surface for grouting ConFin_41-111_TQ-Work Experiences_

5 Skills Required For Certification Journeyperson Signature Verified By Applicant Mix grout Install grout Finish exposed grout surfaces ConFin_41-111_TQ-Work Experiences_

6 Note to Journeypersons Journeypersons who have applied their signatures to the skills required for the certification section of this document must complete the following sections. The Apprenticeship and Trades Certification Division, for the purpose of verification, may contact Journeypersons who have applied their signatures to skills for applicants Journeyperson Supervisor Verification Name: Surname First Initial Address: / / / Telephone: ( ) Cell phone: ( ) address: Certificate Number: and/or I.P. Number: Name (signature): Journeyperson Supervisor Verification Name: Surname First Initial Address: / / / Telephone: ( ) Cell phone: ( ) Certificate Number: and/or I.P. Number: Name (signature):

7 For Office Use Only Credit: Approved by: Date: month / day / year Note To Trade Qualifier Applicants If employer verification is not possible, please contact the nearest Apprenticeship and Trades Certification Office to discuss available options. Contact Information Avalon Confederation Building West Block, P.O. Box 8700 St. John s, NL A1B 4J6 Phone: (709) Fax: (709) Toll Free: Clarenville Suite Myers Avenue Clarenville, NL A5A 1T5 Phone: (709) Fax: (709) Toll Free: Central Education & Skills 42 Hardy Avenue Grand Falls-Windsor, NL A2A 2J9 Phone: (709) Fax: (709) Toll Free Western Noton Building Annex 133 Riverside Drive P.O. Box 2006 Corner Brook, NL A2H 6J8 Phone: (709) Fax: (709) Toll Free Labrador Bursey Building 163 Hamilton River Road P.O. Box 3014, Station B Happy Valley Goose Bay, NL A0P 1E0 Phone: (709) Fax: (709) Toll Free