MULTILINE FACILITY DESIGN REQUIREMENTS 6/29/2018

Transcription

1 MULTILINE FACILITY DESIGN REQUIREMENTS 6/29/2018

2 SUMMARY OF MULTILINE DESIGN REQUIREMENTS ELEMENT Cadillac Vehicle Runway Floor Tile Furniture Color and Trim Wood Wall Carpet DESCRIPTION Vehicle(s) are arranged in a runway configuration (325 SF / Car Allocation) Cadillac tile is used for the runway and adjacent areas - see application requirements Four (4) guests chairs and one (1) occasional table Color and Trim Box to sit on occasional table Wood wall is installed behind runway vehicles; Digital Signage installed on wood wall Carpet inset under seating area OPTIONAL ELEMENT Virtual Reality Display/interaction area - optional, in addition to required physical vehicle display Multiline Requirements Version 0.0 DRAFT 2

3 MULTILINE REQUIREMENTS: PROTOTYPICAL APPLICATION Multiline Requirements Version 0.0 DRAFT 3

4 MULTILINE REQUIREMENTS: PROTOTYPICAL APPLICATION DIGITAL SIGNAGE WOOD WALL RUNWAY TILE CADILLAC DISPLAY VEHICLE FIELD TILE COLOR + TRIM PLAN OF REQUIRED CADILLAC BRAND ELEMENTS IN MULTILINE FACILITIES Multiline Requirements Version 0.0 DRAFT 4

5 RUNWAY + TILE CONFIGURATION 25 STANDARD VEHICLE BAY IN-FLOOR POWER OUTLET T1 T2 VEHICLE SPACE ALLOCATION: 13 WIDE RUNWAY: 12 WIDE 6 6 METAL PLACEMENT MARKER VEHICLE RUNWAY FRONT OF SHOWROOM TYPICAL RUNWAY VEHICLE BAY TILE PATTERN AT RUNWAY The showroom field floor is to be a 12 x24 porcelain tile, in a 1/2 running bond pattern. Showroom runway is to be a 12 x24 porcelain tile in a stacked bond pattern arranged perpendicular to the field tile pattern. The runway is designated by a floor tile color and pattern change from T1 set in running bond parallel to the front of the showroom to T2 set in stacked bond perpendicular to the front of the showroom. Each vehicle must be allocated a 13 x 25 (325 SF) area of runway area. A permanent metal strip must be installed within the grout joints in each vehicle bay to facilitate proper vehicle placement. Runway must include a single duplex fully recessed floor outlet, (stainless steel finish), under front of each vehicle. Cut tiles are to be avoided where ever possible. Runways must not have cut tiles, except where necessary to accommodate metal vehicle placement markers. Clear area around vehicles must be maintained at all times. Multiline Requirements Version 0.0 DRAFT 5

6 SHOWROOM WOOD WALL 4" EQ EQ EQ BUILT-IN MONITOR ELEVATION OF EQ SHOWROOM WOOD EQ WALL SPACING TO BE VERIFIED BASED ON ACTUAL WALL DIMENSIONS 1/8" GYP. BD. PAINTED BLACK AT REVEAL LOCATIONS WD1 MWK PANEL EQ 1/2" BUILT-IN MONITOR EQ EQ GYP. BD. PAINTED BLACK AT REVEAL LOCATIONS WD1 PANEL FINISHED EDGES BUILT-IN MONITOR EQ EQ 1/4" SCHED. PARTITION WD1 MWK PANEL FINISHED EDGES Rear wall is to be clad with walnut wood veneer panels in a horizontal orientation of both panels and wood grain. The length of the wall should match the length of the runway display. All panels must be attached with concealed fastening systems - no visible fasteners are permitted. Showroom wood wall is to remain void of any wall accessories incorporated into it, (including; electrical devices, mechanical venting, wall mounted signage, lighting, etc. Avoid if at all possible mounting any code-required devices to or through the wood panels. FINISHED EDGES WD1 MWK PANEL TYPICAL VERTICAL DETAIL AT MILLWORK PANELS TYPICAL HORIZONTAL SECTION DETAIL AT MILLWORK PANELS TYPICAL CORNER DETAIL AT MILLWORK PANELS Multiline Requirements Version 0.0 DRAFT 6

7 FINISHES WALLS FLOORS WD1 WOOD WALL T1 FIELD TILE PT1 TYPICAL WALL FINISH T2 RUNWAY FEATURE TILE CPT1 LOUNGE SEATING, OPTIONAL VR SPACE Multiline Requirements Version 0.0 DRAFT 7

8 FINISHES NO. COLOR & MATERIAL SPECIFICATIONS DESCRIPTIONS MANUFACTURER/ SUPPLIER FLOORS T1 LEA CERAMICHE BASALTINA STONE PROJECT COLOR: NATURALE SIZE: 12 X 24 NUMBER: LGWBSRI 1330 TEC POWER GROUT 929 SHOWROOM FIELD TILE VIRGINIA TILE STEVE REINING CADILLAC@VIRGINIATILE.COM T2 LEA CERAMICHE BASALTINA STONE PROJECT COLOR: SABBIATA SIZE: 12 X 24 NUMBER: LGWBSRI 1330 TEC POWER GROUT 934 SHOWROOM RUNWAY FLOOR TILE VIRGINIA TILE STEVE REINING CADILLAC@VIRGINIATILE.COM CPT1 SHAW CONTRACT GROUP ARTISAN LOOM COLOR: ANGKOR CARPET (TILE OR BROADLOOM) SHAW MATT HODGES MATTHEW.HODGES@SHAWINC.COM WALLS PT1 TO MATCH BENJAMIN MOORE R: G: 244 DISTANT GRAY B:240 ECO SPEC WB INTERIOR GRADE LATEX PAINT, EGGSHELL FINISH ON WALLS, SEMI-GLOSS ON DOORS LOCAL BENJAMIN MOORE PAINT SUPPLY STORE WD1 RECONSTITUTED WALNUT VENEER LOG #25146 FSC (SEE CONTROL SAMPLE) WOOD PANELING ROB GIBSON RGIBSON@DOOGEVENEERS.COM (616) WB1 CUSTOMER TOUCH POINTS WHERE WD1 AND PT01 OCCURS WOOD WALL BASE FINISH TO MATCH ADJACENT WALL OPEN Multiline Requirements Version 0.0 DRAFT 8

9 FURNITURE SEAT AND BACK UPHOLSTERY CH1 CABOT WRENN CRUISE CHAIR TOP WHITE GLASS CH1 TB1 CH1 LEGS POLISHED STAINLESS STEEL CH1 CH1 TB1 NUCRAFT EMME BASE WALNUT ITEM DESIGNATION FINISH NAME MANUFACTURER LOUNGE CHAIR CH1 STINSON DUET SUGAR AND SPICE SOLID MAPLE (FRAME AND LEGS) STAIN COLOR: BRITTNEY SMOKE COFFEE TABLE TB1 WHITE GLASS (TOP) POLISHED STAINLESS (LEGS) WALNUT M33 MOCHA CRUISE CHAIR 6305 EMME COFFEE TABLE 42" X 42" X 14" CABOT WRENN CONTACT:: JEFF LARSON JEFF@FACILITECHSOLUTIONS.COM NUCRAFT CONTACT: JEFF LARSON JEFF@FACILITECHSOLUTIONS.COM Multiline Requirements Version 0.0 DRAFT 9

10 COLOR + TRIM COLOR + TRIM: The Color + Trim box is required to provide customers with access to physical material samples for interior and exterior Cadillac vehicle finishes. The Color + Trim box is available from DCI Marketing. CONTACT INFORMATION DCI Marketing General Motors Dealer Line Multiline Requirements Version 0.0 DRAFT 10

11 DIGITAL SIGNAGE DIAGONAL SCREEN DIMENSION TYP. All digital signage for the Cadillac multiline must show dedicated Cadillac production content, unless specified to the contrary. Locate digital signage within the Wood Branding Wall. The requirement for the placement and the size of the display(s) are to be proportional to the size of the wood branding wall. REQUIRED QUANTITIES: WOOD BRANDING WALL W/ ONE MONITOR A minimum of one monitor is required in multiline facilities. An additional monitor may be added per Pinnacle requirements DIAGONAL SCREEN DIMENSION TYP DIAGONAL SCREEN DIMENSION TYP. MONITOR SPECIFICATION: Preferred: Samsung DM range, Samsung DH range, NEC V range, NEC P range Alternative: Samsung ED range, Samsung DB range, Samsung QM range Displays must be commercial grade with 1080p and 4K resolution. The media players for the displays must be sourced from GMIT. They are MediaVUE D1, D2, or D6 depending on the type of display, single or video wall. WOOD BRANDING WALL W/ MULTIPLE MONITORS Multiline Requirements Version 0.0 DRAFT 11

12 OPTIONAL VIRTUAL REALITY INSTALLATION NOTE: THE FOLLOWING SUMMARY INFORMATION IS PROVIDED FOR REFERENCE. PLEASE REFER TO FOR COMPLETE AND UP-TO-DATE INFORMATION. The diagrams on this page illustrate the prototypical configuration of the Cadillac Virtual Reality display, which is optional for Multiline facilities in addition to the required physical vehicle display. Cadillac offers two installation options for your Cadillac in Virtual Reality experience. The minimum space requirement for Cadillac in Virtual Reality is 8 X8. OPTION 1 OPTION 2 WALL PANEL Includes everything detailed in Option 1, as well as the following: 60 W x 1/2 D x up to 120 A.F.F. Fabric Wrapped Panel PRECISION ENTRANCE WALL Includes two-piece fabric wrapped panel designed to accommodate a variety of ceiling heights. Includes 3 H x ½ D white acrylic dimensional letters that attach with pins and adhesive. Back wall includes pre-cut holes for cable and cord management and mounts directly to dealership wall. 30 W x 4 D x up to 120 Precision Entrance Wall - Powdercoated Benjamin Moore 1609 Temptation Includes 2 x 2 vertical tubes with horizontal aluminum slats designed to accommodate a variety of ceiling heights. 4 H x ½ D white acrylic logo. Precision Entrance wall secured to floor and ceiling FREESTANDING CABINET 60 W x 16 D x 33 H Walnut Veneer Cabinet Includes (2) locking side doors with perforated metal panel, pullout CPU shelf for easy access and (2) lockable front drawers for additional storage. Cabinet will secure directly to wall of dealership. Multiline Requirements Version 0.0 DRAFT 12

13 ALTERNATIVE PLAN OPTIONS SALES OFFICES The diagrams on this page illustrate potential layout variations to the prototypical installation, which may be used as necessary to accommodate renovations/adaptations of existing showroom spaces. OPTION A WOOD WALL WITH DIGITAL SIGNAGE CADILLAC VEHICLE DISPLAY / CADILLAC RUNWAY TILE INSET SEATING AREA / CADILLAC RUNWAY TILE INSET CADILLAC FIELD TILE GLASS STOREFRONT SALES OFFICES OPTION B CADILLAC FIELD TILE WOOD WALL WITH DIGITAL SIGNAGE CADILLAC VEHICLE DISPLAY / CADILLAC RUNWAY TILE INSET SEATING AREA / CADILLAC RUNWAY TILE INSET GLASS STOREFRONT Multiline Requirements Version 0.0 DRAFT 13

14 SAMPLE TEST FIT 1 BEFORE The diagrams on this page and the following page illustrate demonstrative adaptations of Chevrolet showroows to accommodate the Cadillac mulitiline showroom installation. They are provided for reference and showroom layout will vary by facility. AFTER WITH CADILLAC DISPLAY WITH OPTIONAL LAYOUT B ALTERNATE LAYOUT OPTION B Multiline Requirements Version 0.0 DRAFT 14

15 SAMPLE TEST FIT 2 BEFORE AFTER WITH CADILLAC DISPLAY Multiline Requirements Version 0.0 DRAFT 15