06/2010 Technical Manual MESA - KSK. Gable Platform System for Exterior Operations

Size: px

Start display at page:

Download "06/2010 Technical Manual MESA - KSK. Gable Platform System for Exterior Operations"

Andra Clark
5 years ago
Views:

1 06/2010 Technical Manual MESA - KSK Gable Platform System for Exterior Operations

2 Contents Introduction System Description 1 Working Limits 2 Scope of Applications 3 System Overview 4 Sets 12 Dimensions 19 Timbers 21 Part List Basic System 24 Main System Sets 25 Tie-Shoe Sets 30 Anchor-Shoe Sets 31 Extension Sets 32 Platform-to-Platform Connections 33

3 General Remarks Remarks Symbols Used All products of MESA should be used according to the relevant safety regulations of the state or country in which they are operated. Schematic illustrations on this manual give only basic rules to be applied during assembly, therefore it does not complete from the safety point of view. MESA products could only be used according to the Instruction or User Manuals, any Technical Details given in Documents provided by MESA. Any MESA products could not be combined with the products of other manufacturers. Information Important Note Sight-Check Warning Mesa Imalat reserves the right to make technical changes in the interests of progress. Copyright by MESA Imalat San.ve Tic A.S.- Ankara-Turkey

4 Warranty Warranty Period Limited Warranty for two (2) years is promissed by Mesa İmalat San.ve Tic. A.Ş. for Steel Face Formworks and Slab Formworks unless the Operational Conditions described below are violated. This warranty covers defects of steel material, welding and painting. For Hydraulic Cylinders and Hydraulic Power Units, the limited warranty period is one (1) year. Service Life Steel Face Formworks and Slab Formworks, produced by Mesa İMALAT San.ve Tic.A.Ş., is good for 500 concrete castings unless The Operational Conditions described below are violated. Operational Conditions Instruction or User s Manuals must be used while Formwork assemblies, accessory attachements and concrete casting. It is not allowed to use hummer, sedgehummer, cranka and vs that cause physical demage on Formworks, and also applications of extra welding, cutting and drilling without permission of authorities. It is not allowed to exceed the Max Concrete Pressure described in Technical or User s Manuals. Formwork should be used between + 40 C and 30 C. Formworks should be cleaned after each application to remove the concrete residues and active faces should be lubricated with suitable concrete/metal seperation oil. After 250 applications, maintenance should be done at site. This maintenance covers the flatning of active surface, repainting, welding and rust control. After 500 applications, maintenance should be done at work shop where the necessary equipments exist. During the storage period, all active surfaces should be lubricated with suitable oil to prevent rusting. Stock area should be closed area; if it is not possible, formworks and accessories should be stocked in open areas by covering them with water resistant materials. Maitenance procedure should be repeated for each 250 usages after first 500 usages are exceeded. For HCP-hydraulic system, the allowable working pressure must not be exceeded ( 250 bar ). All connections between hydraulic cylinders, hydraulic power units and hydraulic pipes and must be checked against leakage before each usage. Electrical power supply and connections must be suitable as written in the ınstruction or User s Manuals given by MESA.

5 SYSTEM DESCRIPTION System Description Basic Introduction MESA-KSK Gable Platform System is designed and manufactured for exterior working on formwork or any other construction operations. It creates a reliable working and walking area for the crew dealing with all types of formworks or facade operations. Basically, system includes two or three foldable Triangular Brackets, main supporting beam which hangs on the shoes mounted on the wall and connects these brackets at the same time, supplementary connection profiles, post guardrails for safety, steel girders and timber covers on platform areas. Standart Lengths Effective length of MESA-KSK Gable Platform System having double Triangular Brackets is varying from 1,500 mm to 5,500 mm by adjusting the distance between two Triangular Brackets and the cantilever in both sides. In the Sets having triple Triangular Brackets, effective length is in between 3,750 mm and 8,750 mm by adjusting the distance between two Triangular Brackets and the cantilever in both sides. Combination of two sets of MESA-KSK Gable Platform System with double Triangular Brackets gives effective platform length changing from 6,800 mm to 10,200 mm. MESA-KSK Gable Platform is lifted and transferred by means of cranes. It provides high degree of reliability and durability in the range of loading and working limits given in this manual. The fundamental advantage of the system is the versatility on different construction plans. Standart Width Working area of MESA-KSK Gable Platform System has 1,800 mm effective width. By means of Front Extension Set, effective width could be increased to 2,850 mm. Scope of Applications Universal design of MESA-KSK Gable Platform System gives wide range of application on construction sites. Before concreting, System assures a powerful bearing and shoring area for all type of tunnel formworks, wall formworks and even falseworks During concreting, a safe, accessible and convenient working place for concreting crew is achieved by the System. Also, for masonry work, brickwork, heavy cladding,rendering, plastering, and painting, MESA- KSK Gable Platform System is ready to use. 1

6 WORKING LIMITS Working Limits Dimensional Limits Maximum platform length of MESA-KSK Gable Platform with double Triangular Brackets is 3,750 mm exluding cantilever parts of the platform. Maximum platform length of MESA-KSK Gable Platform with triple Triangular Brackets is 6,750 mm exluding cantilever parts of the platform. Maximum cantilever platform length on each sides is 1,135 mm except otherwise stated. Loading Limits In minimum span length of double Triangular Brackets which is 1,000 mm ; Maximum Formwork Weight is 2,910 kg. Maximum Distributed Load is 490 kg/m². Maximum Linear Load is 655 kg/m. Maximum platform length of MESA-KSK Gable Platform with double Triangular Brackets is 5,500 mm including cantilever parts of the platform. Maximum platform length of MESA-KSK Gable Platform with triple Triangular Brackets is 8,750 mm including cantilever parts of the platform. Maximum platform length of 2 sets of MESA- KSK Gable Platform with double Triangular Brackets is 10,200 mm including cantilever parts of the platform. Maximum width of the effective platform area is 2,850 mm.which is obtained by adding front extension set. The width of Standart Platform is1,800 mm. 2

7 SCOPE of APPLICATIONS Scope of Applications KSK-Gable Platform on Tunnel Formwork Applications KSK-Gable Platform under Column and Wall Form Applicability on different combinations KSK-Gable Platform providing necessary safety KSK-Gable Platform with access platform on corners KSK-Gable Platform on large application areas 3

not included in Std.System Sets. Open ends must be kept by Side Guardrail Set*. Shoe Set* are not included in Std.System Sets. Types and quantities of Shoe Set* are derived according to the solution requirements.

8 SYSTEM OVERVIEW System Overview Basic KSK-Gable Platform System with 2-Triangular Bracket Timbers Safety Timber Girder Timber Cover Timber Basic System Triangular Bracket A Shoe Set* B1/B2 Support Set C2 Holder Set D2 Side Guardrail Set* F Guardrail Set E Side Guardrail Set* are not included in Std.System Sets. Open ends must be kept by Side Guardrail Set*. Shoe Set* are not included in Std.System Sets. Types and quantities of Shoe Set* are derived according to the solution requirements. Types B1 and B2 of Shoe Set* are described in Section Sets of this Manual. 4

Holder Set D3 *Side Guardrail Set F Std.Guardrail Set E Mid.

9 System Overview Basic KSK-Gable Platform System with 3-Triangular Bracket Timbers Girder Timber Guardrail Timber Cover Timber Basic System Triangular Bracket A Shoe Set B1/B2 Support Set C3 Holder Set D3 *Side Guardrail Set F Std.Guardrail Set E Mid.Guardrail Set G Descriptions on KSK-Gable Platform System with 2-Triangular Bracket is valid for The System with 3-Triangular Bracket. 5

System Overview Basic KSK-Gable Platform System + Lower Extension For Lower Extension, 1 set of Telescopic Diagonal, 1 set of Bracket Connector and 1 set of Lower Vertical is required for each

10 System Overview Basic KSK-Gable Platform System + Lower Extension For Lower Extension, 1 set of Telescopic Diagonal, 1 set of Bracket Connector and 1 set of Lower Vertical is required for each Triangular Bracket. Support Set is choosen according to the Nominal Length of KSK-Platform. Lower Extension System H - Telescopic Diagonal Set C2/C3 - Support Set J - Bracket Connector Set K - Lower Extension Set 6

System Overview Basic KSK-Gable Platform System + Lower Platform For Lower Platform, 1 set of Lower Platform and, 1 set of Lower Vertical is required for each Triangular

11 System Overview Basic KSK-Gable Platform System + Lower Platform For Lower Platform, 1 set of Lower Platform and, 1 set of Lower Vertical is required for each Triangular Bracket. Support Set is choosen according to the Nominal Length of KSK-Platform. Lower Platform System Lower Extension Set - K Support Set - C2/C3 Lower Platform Set - L 7

12 System Overview Basic KSK-Gable Platform System + Front Extension For Front Extension, 1 set of Front Horizontal and, 1 set of Telescopic Diagonal is required for each Triangular Bracket. Front Extension System Telescopic Diagonal Set - H Front Extension Set - M 8

System Overview Basic KSK-Gable Platform System + Lower Extension + Front Extension Basic KSK-Gable Platform System + Lower Extension + Lower Platform Lower & Front Extension System M - Front

13 System Overview Basic KSK-Gable Platform System + Lower Extension + Front Extension Basic KSK-Gable Platform System + Lower Extension + Lower Platform Lower & Front Extension System M - Front Extension Set H - Telescopic Diagonal Set C2/C3 - Support Set J - Bracket Connector Set K - Lower Extension Set Lower Extension & PlatformSystem L - Lower Platform Set C2/C3 - Support Set J - Bracket Connector Set K - Lower Extension set H - Telescopic Diagonal Set 9

14 System Overview Basic KSK-Gable Platform System + Lower Extension + Lower Platform + Front Extension Basic System Std.Guardrail Set - E Mid.Guardrail Set - G Shoe Set - B Triangular Bracket - A Support Set - C Holder Set - D Extensions M - Front Extension Set H - Telescopic Diagonal Set L - Lower Platform Set J - Bracket Connector Set K - Lower Extension Set 10

15 System Overview Connection of Two Sets of KSK-Gable Platform System P - Holder End Set N - Holder Spacer S -Support End Set R -Support Spacer Set 11

SETS Sets A - Triangular Bracket (Foldable) 1 2 3 4 Parts Bracket Horizontal (1 pcs) Bracket

16 SETS Sets A - Triangular Bracket (Foldable) Parts Bracket Horizontal (1 pcs) Bracket Diagonal (1 pcs) Bracket Vertical (1 pcs) Pin-Ø14x100 (1 pcs) Spring Pin-2.5 (4 pcs) Pin-Ø14x115 (3 pcs) 12

Sets B1 Tie-Shoe Set B2 Anchor-Shoe Set Parts Wing Nut (1 pcs) Plate

Anchor Screw (1 pcs) M24 Washer (1 pcs) M24x70 Bolt (1 pcs) Anchor

Guardrail Set F Side Guardrail Set Parts Parts Guardrail Post (1

Guardrail Set (1 set) M16x100 Bolt (2 pcs) M16 Washer (2 pcs) M16

17 Sets B1 Tie-Shoe Set B2 Anchor-Shoe Set Parts Wing Nut (1 pcs) Plate (1 pcs) Shoe-Tie (1 pcs) Spring Pin-3 (1 pcs) Shoe (1 pcs) Parts Anchor Screw (1 pcs) M24 Washer (1 pcs) M24x70 Bolt (1 pcs) Anchor Shoe (1 pcs) E - Std.Guardrail Set F Side Guardrail Set Parts Parts Guardrail Post (1 pcs) M14x80 Bolt (2 pcs) M14 Washer (2 pcs) M14 Nut (2 pcs) E - Std.Guardrail Set (1 set) M16x100 Bolt (2 pcs) M16 Washer (2 pcs) M16 Nut (2 pcs) Side Guardr.Connector (1 pcs) G Mid.Guardrail Set Parts E - Std.Guardrail Set (1 set) Mid.Guardr.Connector (1 pcs) 13

18 Sets C2 - Support Set ( for 2-Triangular Bracket System ) Parts C2-Support (1 pcs) Pin-Ø14x100 (2 pcs) Spring Pin-2.5 (2 pcs) N N(mm) Part 1,500 C2-Support (1500) 2,000 C2-Support (2000) 2,500 C2-Support (2500) 3,250 C2-Support (3250) 3,500 C2-Support (3500) C3 - Support Set ( for 3-Triangular Bracket System ) Parts C3-Support (1 pcs) Pin-Ø14x100 (3 pcs) Spring Pin-2.5 (3 pcs) N N(mm) Part 2,730 C3-Support (2730) 3,730 C3-Support (3730) 4,730 C3-Support (4730) 6,230 C3-Support (6230) 6,730 C3-Support (6730) 14

Sets D2 - Holder Set ( for 2-Triangular Bracket System ) Parts D2-Holder (1 pcs) M14 Nut (4 pcs) M14 Washer (4 pcs) M14x120 Bolt (4 pcs) N N(mm) Part 1,500 D2-Holder (1500) 2,000 D2-Holder (2000)

19 Sets D2 - Holder Set ( for 2-Triangular Bracket System ) Parts D2-Holder (1 pcs) M14 Nut (4 pcs) M14 Washer (4 pcs) M14x120 Bolt (4 pcs) N N(mm) Part 1,500 D2-Holder (1500) 2,000 D2-Holder (2000) 2,500 D2-Holder (2500) 3,250 D2-Holder (3250) 3,500 D2-Holder (3500) D3 - Holder Set ( for 3-Triangular Bracket System ) Parts M14x120 Bolt (6 pcs) M14 Nut (6 pcs) M14 Washer (6 pcs) D3-Holder (1 pcs) N N(mm) Part 2,730 D3-Holder (2730) 3,730 D3-Holder (3730) 4,730 D3-Holder (4730) 6,230 D3-Holder (6230) 6,730 D3-Holder (6730) 15

20 Sets M - Front Extension Set Parts Front Horizontal (1 pcs) Timber Connector (2 pcs) Bracket Connector (1 pcs) Pin-Ø14x100 (3 pcs) Spring Pin-2.5 (3 pcs) H - Telescopic Diagonal Set Parts Pin-Ø14x100 (2 pcs) Spring Pin-2.5 (2 pcs) Telescopic Prop (1 pcs) 16

21 Sets K - Lower Extension Set J - Bracket Connector Set Parts Spring Pin-2.5 (1 pcs) Bracket Connector (1 pcs) Pin-Ø14x100 (1 pcs) L - Lower Platform Set Parts Spring Pin-2.5 (1 pcs) Pin-Ø14x100 (1 pcs) Lower Vertical (1 pcs) Parts Pin-Ø14x115 (1 pcs) Lower Diagonal (1 pcs) Lower Horizontal (1 pcs) Bracket Connector (1 pcs) Pin-Ø14x100 (3 pcs) Spring Pin-2.5 (4 pcs) 17

22 Sets N - Holder Spacer Set P - Holder End Set Parts Spring Pin-2.5 (2 pcs) Holder Spacer (1 pcs) Pin-Ø14x115 (2 pcs) Parts Spring Pin-2.5 (1 pcs) Holder End (1 pcs) Shoe Connector (1 pcs) Pin-Ø14x115 (1 pcs) R - Support Spacer Set S - Support End Set Parts Spring Pin-2.5 (2 pcs) Support Spacer (1 pcs) Pin-Ø14x100 (2 pcs) Parts Spring Pin-2.5 (2 pcs) Support End (1 pcs) Pin-Ø14x100 (2 pcs) 18

DIMENSIONS Dimensions Standart Spans With Double-Triangular Bracket With Triple-Triangular Bracket P = X1 + X2 + L N = 270 + L P = X1 + X2 + 2L N = 270+2L Dimensions are in mm.

PLATFORM LENGTH - P X min (mm) X max (mm) P min (mm) P max (mm) SPAN LENGTH L (mm) 1,500 135 615 1,500 2,460 1,230 2,000 135 865 2,000 3,460 1,730 2,500 135 1,115 2,500 4,460 2,230 3,250 135 1,490

23 DIMENSIONS Dimensions Standart Spans With Double-Triangular Bracket With Triple-Triangular Bracket P = X1 + X2 + L N = L P = X1 + X2 + 2L N = 270+2L Dimensions are in mm. 135mm X ( L / 2 ) L : Span Length of Triangular Brackets N: Nominal Platform Length X: Cantilever Length P: Platform Length 2- Triangular Bracket NOMINAL PLATFORM SIZE - N(mm) CANTILEVER LENGTH - X PLATFORM LENGTH - P X min (mm) X max (mm) P min (mm) P max (mm) SPAN LENGTH L (mm) 1, ,500 2,460 1,230 2, ,000 3,460 1,730 2, ,115 2,500 4,460 2,230 3, ,490 3,250 5,960 2,980 3-Triangular Bracket NOMINAL PLATFORM SIZE - N(mm) CANTILEVER LENGTH - X PLATFORM LENGTH - P X min (mm) X max (mm) P min (mm) P max (mm) SPAN LENGTH L (mm) 2, ,730 3,690 1,230 3, ,730 5,190 1,730 4, ,115 4,730 6,690 2,230 6, ,490 6,230 8,940 2,980 Refer to MESA advisory for other span lengths listed above. For detailed information about cantilever lengths, refer to section Loading Limits on User s Manual. 19

24 Dimensions Standart Heights and Depths Basic System Basic System + Lower and Front Extension Wmin=1800 mm Ymin=2365 mm Wmax=2825 mm Ymax=4275 mm d : Slab Thickness H : Distance between Ceiling and Tie-Rod Y :Overall Platform Height W :Effective Platform Depth Adjustable Height Range (mm) Ymin Ymax 4275 Adjustable Depth Range (mm) Wmin Wmax

25 TIMBERS Timbers Timber Girders y Wmin Wmax P : Platform Length W : Effective Platform Depth t : Thickness of Timber Girder w : Width of Timber Girder y : Distance between two adjasent Girders d : Slab Thickness P y y (Wmax-Wmin) P y 600 mm Quantity Wmin = 1,800 mm Wmax = 2,825 mm Quantity 4 pcs. 6 pcs. Dimensions t (mm) 65 w t P w (mm) 200 d 180 mm mm < d List of Platform Lengths P are tabulated in the Section Dimensions on this Manual. Do not use damaged or knotty woods. 21

26 Timbers Timber Covers w P Wmin Wmax P : Platform Length W : Effective Platform Depth t : Thickness of Timber Cover w : Width of Timber Cover w P Quantity No.of pieces = (P(mm) / 200(mm)) List of Platform Lengths P are tabulated in the Section Dimensions on this Manual. t W Dimensions t (mm) 50 w w (mm) 200 main 100 filler List of Effective Platform Depths W are tabulated in the Section Dimensions on this Manual. Do not use damaged or knotty woods. 22

27 Timbers Guardrail Timber W P S = W mm Side Guardrail Timber S = P Guardrail Timber P : Platform Length W : Platform Width t : Thickness of Guardrail Timber w : Width of Guardrail Timber S : Length of Guardrail Timber Quantity Guardrail Timbers Side Guardrail Timbers Quantity 4 pcs. 4 pcs. Dimensions w t Do not use damaged or knotty woods. S t (mm) 50 w (mm) 150 List of Effective Platform Depths W and Platform Lengths P are tabulated in the Section Dimensions on this Manual. 23

28 Part List BASIC SYSTEMS KSK-BASIC SYSTEM (with 2-Triangular Bracket) Basic Systems Support and Holder Lengths (mm) LEGEND ID MESA ID Unit Weight Quantity per NOMINAL PLATFORM SIZE - N (mm) Description PART NO PART NAME (kg) Set D2-Holder M.J.BKSK.1KT.. KSK-HOLDER (See Table) C2-Support M.J.BKSK.1KD.. KSK-SUPPORT (See Table) Bracket Horizontal M.M.KSKH.1K KSK-HORIZONTAL Bracket Diagonal M.M.KSKD.1K KSK-INSIDE DIAGONAL Bracket Vertical M.M.KSKV.1K KSK-VERTICAL Guardrail Post M.D.H401.0K GUARDRAIL POST (1500) Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Pin-Ø14x115 Z.C.PKSK.0E01 KSK-PIN (14x115)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E M14x80 Bolt T.C.GM14.1S0080 HEXAGON BOLT-G (8.8) M14x M14x120 Bolt T.C.GM14.1S0120 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) KSK-BASIC SYSTEM (with 3-Triangular Bracket) Support and Holder Lengths (mm) LEGEND ID MESA ID Unit Weight Quantity per NOMINAL PLATFORM SIZE - N (mm) Description PART NO PART NAME (kg) Set D3-Holder M.J.BKSK.1KT.. KSK-HOLDER (See Table) C3-Support M.J.BKSK.1KD.. KSK-SUPPORT (See Table) Bracket Horizontal M.M.KSKH.1K KSK-HORIZONTAL Bracket Diagonal M.M.KSKD.1K KSK-INSIDE DIAGONAL Bracket Vertical M.M.KSKV.1K KSK-VERTICAL Guardrail Post M.D.H401.0K GUARDRAIL POST (1500) Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Pin-Ø14x115 Z.C.PKSK.0E01 KSK-PIN (14x115)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E M14x80 Bolt T.C.GM14.1S0080 HEXAGON BOLT-G (8.8) M14x M14x120 Bolt T.C.GM14.1S0120 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14)

29 Part List MAIN SYSTEM SETS Main System Sets LEGEND ID MESA ID Description PART NO PART NAME Unit Weight (kg) Quantity per Set A - KSK-TRIANGULAR BRACKET SET E.M.MKSK.0TB Bracket Horizontal M.M.KSKH.1K KSK-HORIZONTAL Bracket Diagonal M.M.KSKD.1K KSK-INSIDE DIAGONAL Bracket Vertical M.M.KSKV.1K KSK-VERTICAL Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Pin-Ø14x115 Z.C.PKSK.0E01 KSK-PIN (14x115)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT E - STANDARD GUARDRAIL SET E.M.DH15.0K Guardrail Post M.D.H401.0K GUARDRAIL POST (1500) M14x80 Bolt T.C.GM14.1S0080 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT 6.75 F - SIDE GUARDRAIL SET E.M.DHK1.0KY Guardrail Post M.D.H401.0K GUARDRAIL POST (1500) Side Guardrail Connector Z.B.H16E.0K1 16E-GUARDRAIL CONNECTOR (Type1) M16x100 Bolt T.C.GM16.1S0100 HEXAGON BOLT-G (8.8) M16x M14x80 Bolt T.C.GM14.1S0080 HEXAGON BOLT-G (8.8) M14x M16 Nut T.D.GM16.1S HEXAGON NUT-G (8.8) M M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M16 Washer T.P.PM16.S WASHER-G (M16) M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT G - MID GUARDRAIL SET E.M.DHK1.0KQ Guardrail Post M.D.H401.0K GUARDRAIL POST (1500) Mid.Guardrail Connector Z.B.HKSK.0K2 KSK-MID GUARDRAIL CONNECTOR M14x80 Bolt T.C.GM14.1S0080 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT

30 Part List Main System Sets LEGEND ID MESA ID Description PART NO PART NAME Unit Weight (kg) Quantity per Set D2 - KSK-HOLDER SET (1500) E.M.MKSK.0KH215 D2-Holder (1500) M.J.BKSK.1KT150 KSK-HOLDER (1500) M14x120 Bolt T.C.GM14.1S0120 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT D2 - KSK-HOLDER SET (2000) E.M.MKSK.0KH220 D2-Holder (2000) M.J.BKSK.1KT200 KSK-HOLDER (2000) M14x120 Bolt T.C.GM14.1S0120 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT D2 - KSK-HOLDER SET (2500) E.M.MKSK.0KH225 D2-Holder (2500) M.J.BKSK.1KT250 KSK-HOLDER (2500) M14x120 Bolt T.C.GM14.1S0120 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT D2 - KSK-HOLDER SET (3250) E.M.MKSK.0KH232 D2-Holder (3250) M.J.BKSK.1KT325 KSK-HOLDER (3250) M14x120 Bolt T.C.GM14.1S0120 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT D2 - KSK-HOLDER SET (3500) E.M.MKSK.0KH235 D2-Holder (3500) M.J.BKSK.1KT350 KSK-HOLDER (3500) M14x120 Bolt T.C.GM14.1S0120 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT

31 Part List Main System Sets LEGEND ID MESA ID Description PART NO PART NAME Unit Weight (kg) Quantity per Set D3 - KSK-HOLDER SET (2730) E.M.MKSK.0KH327 D3-Holder (2730) M.J.BKSK.1KT273 KSK-HOLDER (2730) M14x120 Bolt T.C.GM14.1S0120 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT D3 - KSK-HOLDER SET (3730) E.M.MKSK.0KH337 D3-Holder (3730) M.J.BKSK.1KT373 KSK-HOLDER (3730) M14x120 Bolt T.C.GM14.1S0120 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT D3 - KSK-HOLDER SET (4730) E.M.MKSK.0KH347 D3-Holder (4730) M.J.BKSK.1KT473 KSK-HOLDER (4730) M14x120 Bolt T.C.GM14.1S0120 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT D3 - KSK-HOLDER SET (6230) E.M.MKSK.0KH362 D3-Holder (6230) M.J.BKSK.1KT623 KSK-HOLDER (6230) M14x120 Bolt T.C.GM14.1S0120 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT D3 - KSK-HOLDER SET (6730) E.M.MKSK.0KH367 D3-Holder (6730) M.J.BKSK.1KT673 KSK-HOLDER (6730) M14x120 Bolt T.C.GM14.1S0120 HEXAGON BOLT-G (8.8) M14x M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M M14 Washer T.P.PM14.S WASHER-G (M14) TOTAL WEIGHT

32 Part List Main System Sets LEGEND ID MESA ID Description PART NO PART NAME Unit Weight (kg) Quantity per Set C2 - KSK-SUPPORT SET (1500) E.M.MKSK.0KS215 C2-Support (1500) M.J.BKSK.1KD150 KSK-SUPPORT (1500) Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT C2 - KSK-SUPPORT SET (2000) E.M.MKSK.0KS220 C2-Support (2000) M.J.BKSK.1KD200 KSK-SUPPORT (2000) Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT C2 - KSK-SUPPORT SET (2500) E.M.MKSK.0KS225 C2-Support (2500) M.J.BKSK.1KD250 KSK-SUPPORT (2500) Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT C2 - KSK-SUPPORT SET (3250) E.M.MKSK.0KS232 C2-Support (3250) M.J.BKSK.1KD325 KSK-SUPPORT (3250) Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT C2 - KSK-SUPPORT SET (3500) E.M.MKSK.0KS235 C2-Support (3500) M.J.BKSK.1KD350 KSK-SUPPORT (3500) Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT

33 Part List Main System Sets LEGEND ID MESA ID Description PART NO PART NAME Unit Weight (kg) Quantity per Set C3 - KSK-SUPPORT SET (2730) E.M.MKSK.0KS327 C3-Support (2730) M.J.BKSK.1KD273 KSK-SUPPORT (2730) Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT C3 - KSK-SUPPORT SET (3730) E.M.MKSK.0KS337 C3-Support (3730) M.J.BKSK.1KD373 KSK-SUPPORT (3730) Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT C3 - KSK-SUPPORT SET (4730) E.M.MKSK.0KS347 C3-Support (4730) M.J.BKSK.1KD473 KSK-SUPPORT (4730) Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT C3 - KSK-SUPPORT SET (6230) E.M.MKSK.0KS362 C3-Support (6230) M.J.BKSK.1KD623 KSK-SUPPORT (6230) Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT C3 - KSK-SUPPORT SET (6730) E.M.MKSK.0KS367 C3-Support (6730) M.J.BKSK.1KD673 KSK-SUPPORT (6730) Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT

34 Part List TIE-SHOE SETS Tie-Shoe Sets LEGEND ID MESA ID Description PART NO PART NAME Unit Weight (kg) Quantity per Set B - KSK-SHOE SET (350) E.M.JAKS.0K035 Shoe M.J.AKSK.0K KSK-SHOE Shoe-Tie (350) Z.S.TQKS.0E035 KSK-SHOE TIE(20FAx350)-E Spring Pin-3 Z.C.YFR3.0E FR-SPRING PIN (3)-E Wing Nut Z.S.SKY1.0E23Y10 WING NUT (20F)-E Plate Z.S.PKP1.0E26 PLATE-10x100x100(26)-E TOTAL WEIGHT B - KSK-SHOE SET (450) E.M.JAKS.0K045 Shoe M.J.AKSK.0K KSK-SHOE Shoe-Tie (450) Z.S.TQKS.0E045 KSK-SHOE TIE(20FAx450)-E Spring Pin-3 Z.C.YFR3.0E FR-SPRING PIN (3)-E Wing Nut Z.S.SKY1.0E23Y10 WING NUT (20F)-E Plate Z.S.PKP1.0E26 PLATE-10x100x100(26)-E TOTAL WEIGHT B - KSK-SHOE SET (500) E.M.JAKS.0K050 Shoe M.J.AKSK.0K KSK-SHOE Shoe-Tie (500) Z.S.TQKS.0E050 KSK-SHOE TIE(20FAx500)-E Spring Pin-3 Z.C.YFR3.0E FR-SPRING PIN (3)-E Wing Nut Z.S.SKY1.0E23Y10 WING NUT (20F)-E Plate Z.S.PKP1.0E26 PLATE-10x100x100(26)-E TOTAL WEIGHT B - KSK-SHOE SET (750) E.M.JAKS.0K075 Shoe M.J.AKSK.0K KSK-SHOE Shoe-Tie (750) Z.S.TQKS.0E075 KSK-SHOE TIE(20FAx750)-E Spring Pin-3 Z.C.YFR3.0E FR-SPRING PIN (3)-E Wing Nut Z.S.SKY1.0E23Y10 WING NUT (20F)-E Plate Z.S.PKP1.0E26 PLATE-10x100x100(26)-E TOTAL WEIGHT B - KSK-SHOE SET (1000) E.M.JAKS.0K100 Shoe M.J.AKSK.0K KSK-SHOE Shoe-Tie (1000) Z.S.TQKS.0E100 KSK-SHOE TIE(20FAx1000)-E Spring Pin-3 Z.C.YFR3.0E FR-SPRING PIN (3)-E Wing Nut Z.S.SKY1.0E23Y10 WING NUT (20F)-E Plate Z.S.PKP1.0E26 PLATE-10x100x100(26)-E TOTAL WEIGHT B - KSK-SHOE SET (1500) E.M.JAKS.0K150 Shoe M.J.AKSK.0K KSK-SHOE Shoe-Tie (1500) Z.S.TQKS.0E150 KSK-SHOE TIE(20FAx1500)-E Spring Pin-3 Z.C.YFR3.0E FR-SPRING PIN (3)-E Wing Nut Z.S.SKY1.0E23Y10 WING NUT (20F)-E Plate Z.S.PKP1.0E26 PLATE-10x100x100(26)-E TOTAL WEIGHT

35 Part List ANCHOR-SHOE SETS Anchor-Shoe Sets LEGEND ID MESA ID Description PART NO PART NAME Unit Weight (kg) Quantity per Set B - KSK/ANCHOR-SHOE SET (350) E.M.JAKS.0KB160 Anchor Shoe M.J.AKSK.0KB KSK-ANCHOR SHOE Anchor Screw Z.A.DB CONICAL SCREWED ANCHOR-48x160 (M M24x70 Bolt T.C.GM24.1S0070 HEXAGON BOLT-G (8.8) M24x M24 Washer T.P.PM24.S WASHER-G (M24) TOTAL WEIGHT

36 Part List EXTENSION SETS Extension Sets LEGEND ID MESA ID Description PART NO PART NAME Unit Weight (kg) Quantity per Set H - TELESCOPIC DIAGONAL SET E.M.MKSK.0KDK Telescopic Prop M.J.BKSK.1KBD KSK-TELESCOPIC PROP Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT K - LOWER EXTENSION SET E.M.MKSK.0KBU Lower Vertical M.J.BKSK.1KLU KSK-LOWER EXTENSION Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT L - LOWER PLATFORM SET E.M.MKSK.0KBG Lower Diagonal M.J.BKSK.2KLB KSK-WALKING PLT.DIAGONAL Lower Horizontal M.J.BKSK.1KLP KSK-WALKING PLT.HORIZONTAL Bracket Connector Z.B.JKSK.0K01 KSK-BRACKET CONNECTOR Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Pin-Ø14x115 Z.C.PKSK.0E01 KSK-PIN (14x115)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT M - FRONT EXTENSION SET E.M.MKSK.0KFU Front Horizontal M.J.BKSK.2KLB KSK-WALKING PLT.DIAGONAL Timber Connector A.M.KSK9.0K KSK-TIMBER CONNECTOR Bracket Connector Z.B.JKSK.0K01 KSK-BRACKET CONNECTOR Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT J - BRACKET CONNECTOR SET E.M.MKSK.0KDB Bracket Connector Z.B.JKSK.0K01 KSK-BRACKET CONNECTOR Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT

37 Part List Platform-to-Platform Connections PLATFORM-to-PLATFORM CONNECTIONS LEGEND ID MESA ID Description PART NO PART NAME Unit Weight (kg) Quantity per Set N - KSK-Holder Spacer SET E.M.MKSK.0KTA Holder Spacer M.J.BKSK.1KTAA KSK-HOLDER SPACER Pin-Ø14x115 Z.C.PKSK.0E01 KSK-PIN (14x115)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT P - KSK-Holder End SET E.M.MKSK.0KTU Holder End M.J.BKSK.1KTUA KSK-HOLDER END Shoe Connector Z.B.JKSK.0K06 KSK-SHOE CONNECTOR Pin-Ø14x115 Z.C.PKSK.0E01 KSK-PIN (14x115)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT R - KSK-Support Spacer SET E.M.MKSK.0KDA Support Spacer M.J.BKSK.1KDAA KSK-SUPPORT SPACER Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT S - KSK-Support End SET E.M.MKSK.0KDU Support End M.J.BKSK.1KDUA KSK-SUPPORT END Pin-Ø14x100 Z.C.PKSK.0E02 KSK-PIN (14x100)-E Spring Pin-2.5 Z.C.YFR2.0E FR-SPRING PIN (2.5)-E TOTAL WEIGHT 7.75 For ordering, use MESA ID PART NO s and MESA ID PART NAME s of Sets, Assemblies and any other unique parts. Suffix -E on the Part Name means that Part is Electro Galvanised. Suffix -G on the Part Name means that Part is Hot Deep Galvanised. 33

38 Notes