Flowfast. System Data CHEMICAL RESISTANT UV RESISTANT RESINS SEAMLESS APPLICATIONS VERSATILE APPLICATIONS. STANDS UP TO truck and fork-lift traffic

Transcription

1 Withstands Extreme Temperatures SUPERIOR STRENGTH & DURABILITY DEMARCATION & COLOUR ZONING TECHNICAL INFORMATION Flowfast System Data VERSATILE APPLICATIONS EXTREMELY HARD WEARING CHEMICAL RESISTANT BRight FinishES SEAMLESS APPLICATIONS STANDS UP TO truck and fork-lift traffic UV RESISTANT RESINS

2 12 EN13813 Flowfast Terrosso (4 mm) Description Flowfast Terrosso is a seamless, decorative, hard wearing acrylic resin floor finish, developed for high traffic retail environments. Flowfast Terrosso has been developed to enable very fast track applications, therefore dramatically reducing program time. Uses Ideal for public areas, shops and showrooms, department stores, designer outlets, airports, restaurants, garden centres, schools and hospitals. Standard Terrosso colour chart 1 3 mm Flakes Benefits: Attractive decorative finish Extensive design potential Seamless hygienic finish Easy to clean and maintain High chemical resistance High scratch resistance Wear resistant surface for wheeled traffic. Rapid installation Enhanced resistance to UV light System Design Cream 111 (uses RAL 9010 pigment) Beige 112 (uses RAL 9010 pigment) Flowfast Sealer Flowfast Terrosso Red 311 (uses RAL 9010 pigment) Blue 511 (uses RAL 5023 pigment) Flowfast SL Light Grey 711 (uses RAL 9010 pigment) Signal Grey 712 (uses RAL 7004 pigment) Flowfast Primer Substrate Mid Grey 713 (uses RAL 7004 pigment) Dark Grey 714 (uses RAL 7024 pigment) Flowfast Pigment is available in 25 kg bags, please allow 10 working days lead time. The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to special order.

3 Model Specification Product: Flowfast Terrosso Finish: Satin Thickness: 4 mm Colour: Preparatory work and application in accordance with manufacturers instructions. Manufacturer: Flowcrete UK Ltd Telephone: Customer Service (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 95% RH as per BS8204 and free from rising damp and ground water pressure. Flowfast Damp Primer can be used for substrates up to 100% RH (surface dry). Products Included in this System Primer: Flowfast kg/m 2 Scatter: Natural Quartz 0.3 kg/m 2 Flowfast SL: Flowfast 1.5 kg/m 2 mixed with: Flowfast Pigment 3% weight of Flowfast Resin Flowfast SNL 3.0 kg/m 2 Scatter: Flowfast 0.5 kg/m 2 (to excess) Sealer: Flowfast 0.3 kg/m 2 per coat (3 coats) to obtain a smooth surface Consult individual Product Data sheets for information on Flowfast Catalyst levels. Detailed application instructions are available upon request. Installation Service The installation should be carried out by an approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site Note No resin system is totally colour fast and may change colour over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted. This is more noticeable in very light colours but does not compromise the product s physical or chemical resistance characteristics. We have endeavoured to adopt colours within our standard range which minimise this change. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the sealer. Please contact our Technical Services Department for further advice. Focus on the Floorzone Flowcrete are market leaders in specialist industrial and commercial flooring. Systems available include: underfloor heating systems, floor screeds, surface damp proof membranes, decorative floor finishes, seamless terrazzo, car park deck waterproofing, corrosion resistant systems to name just a few. Our objective is to satisfy your Floorzone needs. Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 o C and at 50% Relative Humidity. Reaction to fire C FL - s1 EN Impact Resistance 10 Nm EN ISO 6272 Wear Resistance < 1 cm 3 EN Bond Strength >2.5 N/mm 2 EN Temperature Resistance Tolerant of sustained temperatures up to 50 o C Water Permeability Nil Karsten test. (impermeable) Chemical Resistance Good resistance to tea, coffee, cola, Slip Resistance Method described in BS (typical values for 4-S rubber slider) fruit juice, soaps and bleach Dry >40 low slip potential (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS /FeRFA type 4. Speed of Cure (per layer) Walk on Full traffic & chemical cure 2-3 hours Cure at ambient temperatures in the range 0 C to +30 C can be achieved by altering the quantity of catalyst used. For applications below 0 C, please consult our Technical Department. Aftercare - Cleaning and Maintenance Clean floors regularly using a rotary scrubber in conjunction with a mildly alkaline detergent. Environmental considerations The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise. Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details , 14 UK

4 12 EN13813 Flowfast Terrosso (4 mm) Description Flowfast Terrosso is a seamless, decorative, hard wearing acrylic resin floor finish, developed for high traffic retail environments. Flowfast Terrosso has been developed to enable very fast track applications, therefore dramatically reducing program time. Uses Ideal for public areas, shops and showrooms, department stores, designer outlets, airports, restaurants, garden centres, schools and hospitals. Standard Terrosso colour chart 5-7 mm Flakes Benefits: Attractive decorative finish Extensive design potential Seamless hygienic finish Easy to clean and maintain High chemical resistance High scratch resistance Wear resistant surface for wheeled traffic. Rapid installation Enhanced resistance to UV light System Design Cream 111 (uses RAL 9010 pigment) Beige 112 (uses RAL 9010 pigment) Flowfast Sealer Flowfast Terrosso Red 311 (uses RAL 9010 pigment) Blue 511 (uses RAL 5023 pigment) Flowfast SL Light Grey 711 (uses RAL 9010 pigment) Signal Grey 712 (uses RAL 7004 pigment) Flowfast Primer Substrate Mid Grey 713 (uses RAL 7004 pigment) Dark Grey 714 (uses RAL 7024 pigment) Flowfast Pigment is available in 25 kg bags, please allow 10 working days lead time. The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to special order.

5 Model Specification Product: Flowfast Terrosso Finish: Satin Thickness: 4 mm Colour: Preparatory work and application in accordance with manufacturers instructions. Manufacturer: Flowcrete UK Ltd Telephone: Customer Service (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 95% RH as per BS8204 and free from rising damp and ground water pressure. Flowfast Damp Primer can be used for substrates up to 100% RH (surface dry). Products Included in this System Primer: Flowfast kg/m 2 Scatter: Natural Quartz 0.3 kg/m 2 Flowfast SL: Flowfast 1.5 kg/m 2 mixed with: Flowfast Pigment 3% weight of Flowfast Resin Flowfast SNL 3.0 kg/m 2 Scatter: Flowfast 0.5 kg/m 2 (to excess) Sealer: Flowfast 0.3 kg/m 2 per coat (3 coats) to obtain a smooth surface Consult individual Product Data sheets for information on Flowfast Catalyst levels. Detailed application instructions are available upon request. Installation Service The installation should be carried out by an approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site Note No resin system is totally colour fast and may change colour over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted. This is more noticeable in very light colours but does not compromise the product s physical or chemical resistance characteristics. We have endeavoured to adopt colours within our standard range which minimise this change. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the sealer. Please contact our Technical Services Department for further advice. Focus on the Floorzone Flowcrete are market leaders in specialist industrial and commercial flooring. Systems available include: underfloor heating systems, floor screeds, surface damp proof membranes, decorative floor finishes, seamless terrazzo, car park deck waterproofing, corrosion resistant systems to name just a few. Our objective is to satisfy your Floorzone needs. Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 o C and at 50% Relative Humidity. Reaction to fire C FL - s1 EN Impact Resistance 10 Nm EN ISO 6272 Wear Resistance < 1 cm 3 EN Bond Strength >2.5 N/mm 2 EN Temperature Resistance Tolerant of sustained temperatures up to 50 o C Water Permeability Nil Karsten test. (impermeable) Chemical Resistance Good resistance to tea, coffee, cola, Slip Resistance Method described in BS (typical values for 4-S rubber slider) fruit juice, soaps and bleach Dry >40 low slip potential (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS /FeRFA type 4. Speed of Cure (per layer) Walk on Full traffic & chemical cure 2-3 hours Cure at ambient temperatures in the range 0 C to +30 C can be achieved by altering the quantity of catalyst used. For applications below 0 C, please consult our Technical Department. Aftercare - Cleaning and Maintenance Clean floors regularly using a rotary scrubber in conjunction with a mildly alkaline detergent. Environmental considerations The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise. Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details , 14 UK

6 13 EN13813 Flowfast Quartz Classic for wet areas (4 mm) Description Flowfast Quartz Classic is a hard wearing, decorative resin floor topping made up of colour stable quartz granules encapsulated in a clear acrylic resin binder. Flowfast Quartz Classic has been developed to enable very fast track applications, typically 2 hours curing time to receive full traffic. Flowfast Quartz Classic for wet areas is a hand trowelled system with a textured satin finish. Uses Ideal for use in kitchens and wet and dry process areas where the floor is subject to heavy traffic, impact and chemical spills. Also suitable for showers, changing rooms etc. Standard Colour Charts Commercial range Benefits: Decorative floor finish Rapid installation High scratch resistance Slip resistant textured finish Excellent wear and impact resistance Seamless, hygienic finish Abrasion resistant High chemical resistance Enhanced resistance to UV light Industrial range Biscuit 102 Light Grey 701 Beige 101 Mid Grey 702 Red 301 Grey 704 Grass Green 601 Dark Grey 703 Green 602 Cream 103 Mid Blue 501 Black 901 Yellow 104 Blue 502 The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to order (restrictions apply).

7 Model Specification Product: Flowfast Quartz Classic for wet areas Finish: Satin Thickness: mm Colour: Preparatory work and application in accordance with suppliers instructions. Supplier: Flowcrete UK Ltd Telephone: Customer Service +44 (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 95% RH as per BS8204 and free from rising damp and ground water pressure. Flowfast Damp Primer can be used for substrates up to 100% RH (surface dry). Products Included in this System Classic (for 4 mm) Primer: Flowfast kg/m 2 Scatter: Coloured Quartz size 0.3 kg/m 2 Topping: Mix 1 part weight Flowfast Binder to approx 3.3 parts of Coloured Quartz, size 7/8 Apply the 8 kg/m 2 (for 4mm) Scatter: Coloured Quartz size 2.0 kg/m 2 Sealer: Flowfast 0.6 kg/m 2 (total for two coats) Consult individual Product Data sheets for information on Flowfast Catalyst levels. Detailed application instructions are available upon request. Installation Service The installation should be carried out by a Flowcrete approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site Environmental considerations The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors. Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Tailored properties can be achieved with the selection of specific resins that are available on request. Reaction to fire B FL - s1 EN Wear Resistance Max wear depth <50μm EN Bond Strength > 2.5 N/mm 2 EN Impact Resistance 10 Nm EN ISO 6272 Compressive Strength 60 N/mm 2 EN Flexural Strength 20 N/mm 2 EN Tensile Strength 15 N/mm 2 BS Temperature Resistance Tolerant of sustained temperatures up to 70 C Water Permeability Nil Karsten test. (impermeable) Chemical Resistance (for specific chemicals please consult chemical resistance chart) Slip Resistance Method described in BS (typical values for 4-S rubber slider) Good resistance to tea, coffee, cola, fruit juice, soaps and bleach Dry >40 low slip potential Wet >40 low slip potential (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS /FeRFA category 6. Speed of Cure (per coat) Walk on Full traffic & chemical cure 2-3 hours Cure at temperatures in the range 0 C to +30 C can be achieved by altering the quantity of catalyst used. For applications below 0 C, please consult Technical Department. Aftercare - Cleaning and Maintenance Clean regularly using a single or double headed rotary scrubber drier in conjunction with a mildly alkaline detergent. Note No resin system is totally colour fast and may change colour over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted. This is more noticeable in very light colours but does not compromise the product s physical or chemical resistance characteristics. We have endeavoured to adopt colours within our standard range which minimise this change. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the sealer. Please contact our Technical Services Department for further advice. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise , 18 UK Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details.

8 13 EN13813 Flowfast Quartz Classic (4 mm) Description Flowfast Quartz Classic is a hard wearing, decorative resin floor topping made up of colour stable quartz granules encapsulated in a clear acrylic resin binder. Flowfast Quartz Classic has been developed to enable very fast track applications, typically 2 hours curing time to receive full traffic. Flowfast Quartz Classic is a hand trowelled system with a satin finish. Uses Ideal for use in dry process areas where the floor is subject to heavy traffic, impact and chemical spills. Standard colour charts Commercial range Benefits: Decorative floor finish Rapid installation High scratch resistance Easy to clean and maintain Excellent wear and impact resistance Seamless, hygienic finish Abrasion resistant High chemical resistance Enhanced resistance to UV light Biscuit 102 Light Grey 701 Industrial range Beige 101 Mid Grey 702 Red 301 Grey 704 Grass Green 601 Dark Grey 703 Green 602 Cream 103 Mid Blue 501 Black 901 Blue 502 Yellow 104 The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to order (restrictions apply).

9 Model Specification Product: Flowfast Quartz Classic Finish: Satin Thickness: mm Colour: Preparatory work and application in accordance with suppliers instructions. Supplier: Flowcrete UK Ltd Telephone: Customer Service +44 (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 95% RH as per BS8204 and free from rising damp and ground water pressure. Flowfast Damp Primer can be used for substrates up to 100% RH (surface dry). Products Included in this System Classic (for 4 mm) Primer: Flowfast kg/m 2 Scatter: Coloured Quartz size 0.3 kg/m 2 Topping: Mix 1 part weight Flowfast Binder to approx 3.3 parts of Coloured Quartz, size 7/8 Apply the 8 kg/m 2 (for 4mm) Sealer: Flowfast 0.3 kg/m 2 Consult individual Product Data sheets for information on Flowfast Catalyst levels. Detailed application instructions are available upon request. Installation Service The installation should be carried out by a Flowcrete approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site Environmental considerations The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors. Note No resin system is totally colour fast and may change colour over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted. This is more noticeable in very light colours but does not compromise the product s physical or chemical resistance characteristics. We have endeavoured to adopt colours within our standard range which minimise this change. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the sealer. Please contact our Technical Services Department for further advice. Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Tailored properties can be achieved with the selection of specific resins that are available on request. Reaction to fire B FL - s1 EN Wear Resistance Max wear depth <50μm EN Bond Strength > 2.5 N/mm 2 EN Impact Resistance 10 Nm EN ISO 6272 Compressive Strength 60 N/mm 2 EN Flexural Strength 20 N/mm 2 EN Tensile Strength 15 N/mm 2 BS Temperature Resistance Tolerant of sustained temperatures up to 70 C Water Permeability Nil Karsten test. (impermeable) Chemical Resistance (for specific chemicals please consult chemical resistance chart) Slip Resistance Method described in BS (typical values for 4-S rubber slider) Good resistance to tea, coffee, cola, fruit juice, soaps and bleach Dry >40 low slip potential (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS /FeRFA category 6. Speed of Cure (per coat) Walk on Full traffic & chemical cure 2-3 hours Cure at temperatures in the range 0 C to +30 C can be achieved by altering the quantity of catalyst used. For applications below 0 C, please consult Technical Department. Aftercare - Cleaning and Maintenance Clean regularly using a single or double headed rotary scrubber drier in conjunction with a mildly alkaline detergent. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise. Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details , 17 UK

10 13 EN13813 Flowfast Quartz Structure (4 mm) Description Flowfast Quartz Structure is a hard wearing, decorative resin floor topping made up of colour stable quartz granules encapsulated in a clear acrylic resin binder. Flowfast Quartz Structure has been developed to enable very fast track applications, typically 2 hours curing time to receive full traffic. Flowfast Quartz Structure is a scatter and seal system with a textured satin finish. Uses Ideal for use in kitchens and wet and dry process areas where the floor is subject to heavy traffic, impact and chemical spills. Standard Colour Charts Commercial range Benefits: Decorative floor finish Rapid installation High scratch resistance Slip resistant textured finish Excellent wear and impact resistance Seamless, hygienic finish Abrasion resistant High chemical resistance Enhanced resistance to UV light Industrial range Biscuit 102 Light Grey 701 Beige 101 Mid Grey 702 Red 301 Grey 704 Grass Green 601 Dark Grey 703 Green 602 Cream 103 Mid Blue 501 Black 901 Yellow 104 Blue 502 The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to order (restrictions apply).

11 Model Specification Product: Flowfast Quartz Structure Finish: Satin Thickness: mm Colour: Preparatory work and application in accordance with suppliers instructions. Supplier: Flowcrete UK Ltd Telephone: Customer Service +44 (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 95% RH as per BS8204 and free from rising damp and ground water pressure. Flowfast Damp Primer can be used for substrates up to 100% RH (surface dry). Products Included in this System Structure (for 4 mm) Primer: Flowfast kg/m 2 Scatter: Natural Quartz size 8 ( kg/m 2 Bodycoat: Mix 1 part weight Flowfast Binder to approx 2 parts of Flowfast SNL Filler Apply the 4.5 kg/m 2 (for 2.5 mm) Scatter: Coloured Quartz size 3.0 kg/m 2 (to excess) Sealer: Flowfast 0.6 kg/m 2 (total for two coats) Consult individual Product Data sheets for information on Flowfast Catalyst levels. Detailed application instructions are available upon request. Installation Service The installation should be carried out by a Flowcrete approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site Environmental considerations The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors. Note No resin system is totally colour fast and may change colour over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted. This is more noticeable in very light colours but does not compromise the product s physical or chemical resistance characteristics. We have endeavoured to adopt colours within our standard range which minimise this change. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the sealer. Please contact our Technical Services Department for further advice. Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Tailored properties can be achieved with the selection of specific resins that are available on request. Reaction to fire B FL - s1 EN Wear Resistance Max wear depth <50μm EN Bond Strength > 2.5 N/mm 2 EN Impact Resistance 10 Nm EN ISO 6272 Temperature Resistance Tolerant of sustained temperatures up to 70 C Water Permeability Nil Karsten test. (impermeable) Chemical Resistance (for specific chemicals please consult chemical resistance chart) Slip Resistance Method described in BS (typical values for 4-S rubber slider) Good resistance to tea, coffee, cola, fruit juice, soaps and bleach Dry >40 low slip potential Wet >40 low slip potential (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS /FeRFA category 6. Speed of Cure (per coat) Walk on Full traffic & chemical cure 2-3 hours Cure at temperatures in the range 0 C to +30 C can be achieved by altering the quantity of catalyst used. For applications below 0 C, please consult Technical Department. Aftercare - Cleaning and Maintenance Clean regularly using a single or double headed rotary scrubber drier in conjunction with a mildly alkaline detergent. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise , 18 UK Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details.

12 Flowfast Rapid Transit SR (5mm) Description Flowfast Rapid Transit SR is a fast track and fire-safe acrylic resin based flooring system containing natural quartz aggregates. The system offers a joint-free and positively textured coloured floor finish with exceptional chemical, wear and slip resistance. Uses The system is ideal for use in areas subject to high foot and vehicular traffic where health, hygiene & fire-safety are paramount, particularly underground rail networks, warehousing and storage facilities, hospitals, health institutions and washroom areas as well as food manufacturing and processing units. Standard colour chart Jet Black (close to RAL 9011) Silver Grey (close to RAL 7001) Benefits Rapid installation Good impact resistance Seamless hygienic finish Exceptional wear resistance Easy to clean and maintain High chemical resistance High scratch resistance Wear resistant surface for wheeled traffic Fire resistant to L.U.L. Section 12 usage Excellent resistance to UV light System Design Sky Blue (close to RAL 5051) Blue Grey (close to RAL 7031) Flowfast Rapid Transit Sealer (coloured) Flowfast Rapid Transit SL Signal Yellow (close to RAL 1003) Sand Yellow (close to RAL 1002) Leaf Green (close to RAL 6002) Pale Green (close to RAL 6021) Flowfast Primer Tomato Red (close to RAL 3013) Substrate The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to special order.

13 Model Specification Product: Flowfast Rapid Transit SR Finish: Satin matt Thickness: mm (5 mm) Colour: Preparatory work and application in accordance with suppliers instructions. Supplier: Flowcrete UK Ltd Telephone : Customer Service (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 95% RH as per BS 8204 and free from rising damp and ground water pressure. Products Included in this System Primer: Flowfast Standard kg/m 2 Scatter: Natural Quartz mm 0.3 kg/ m 2 Topping: Flowfast Rapid Transit SL 6.7 kg/m 2 Scatter: Natural Quartz 5.0 kg/m 2 (to excess) Sealer: Flowfast Rapid Transit Sealer 0.7 kg/m 2 (approx.) Flowfast Rapid Transit Sealer 0.3 kg/m 2 (approx.) Consult individual Product Data sheets for information on Flowfast Catalyst (hardener) levels. Detailed application instructions are available upon request. Installation Service The installation should be carried out by a Flowcrete approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site Focus on the Floorzone Flowcrete Group Ltd are world leaders in specialist industrial and commercial flooring. Systems available include: underfloor heating systems, floor screeds, surface damp proof membranes, decorative floor finishes, seamless terrazzo, car park deck waterproofing, corrosion protection systems to name just a few. Our objective is to satisfy your Floorzone needs. Environmental considerations The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors. Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Fire Resistance L.U.L.. Section 12 Slip Resistance Method described in BS (typical values for 4-S rubber slider) Dry >40 low slip potential (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Temperature Resistance Water Permeability Chemical Resistance Tolerant of sustained temperatures up to 50 o C Nil Karsten test (impermeable) Good resistance to tea, coffee, cola, fruit juice, soaps and bleach Compressive Strength >40 N/mm 2 Flexural Strength >20 N/mm 2 Bond Strength Greater than cohesive strength of 25 N/mm 2 concrete. >1.5 MPa. Complies with BS /FeRFA type 4. Speed of Cure (per layer) Full traffic Full chemical cure For applications below 0 C or above 30 C, please consult our Technical Department. Aftercare - Cleaning and Maintenance Clean regularly using a single or double headed rotary scrubber drier in conjunction with a neutral or mildly alkaline detergent (without solvents). Important Note Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Further Information To ensure you are specifying a fit for purpose flooring system for your project please consult our Technical Advisors on the number below or visit our website to register your interest in specifying one of the most durable floors on the market. 2011, UK Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company