Streamline Installation Guide

Transcription

1 TAYLOR METAL PRODUCTS Streamline Installation Guide

2

3 -

4 Classic StreamLine Lock STANDING SEAM STANDING SEAM PANEL PROFILES The StreamLine Standing Seam is the only metal roofing panel with a patented no-siphon The Premier-Lock Standing Seam dry lock seam, with a unique reversing has the anti-capillary dry lock seam. feature to allow installation of panels from both It's designed directions starting with softer, at any less location. industrial The panel lines is todesigned provide awith more softer, architecturally less industrial lines pleasing to provide appearance. an architecturally pleasing appearance. architecturally pleasing appearance. FLAT PAN 12, and coverage options 16 coverage Factory-notched panels KEY Key FEATURES Features Prevents crowning No visible screws required Sharp, professional appearance 16 12, 12 coverage 16 and 20 coverage options and 16 coverage options Tru-Gauge 24 and and Tru-Gauge Tru-Gauge Factory-notched panels available Factory-notched panels panels available available Vertical Prevents interlocking crowning application: allows installation Anti-Capillary No from visble both dry screw lock directions required seam starting at any location Sharp, professional apperance 1 and 1½ vertical rib Patented Patented no-siphon no-sihon lock lock seam seam 1⅟ Concealed vertical rib fasteners with ⅜ flat top for ease of flashing attachment 1 ⁸ to 1½ vertical rib Pre-slotted fastener flange: allows Concealed Conceled fasteners: fasteners cannot leak expansion/contraction of panel Pre-slotted fastener flange: allows prevents leakage expansion/contraction UL580 and allows Class for expansion/contraction 90 wind of uplift panel of panel UL580 Class Class A 90 fire wind rated uplift UL580 Class 90 wind uplift UL Class A fire rated 3:12 minimum pitch recommended: for lower 3:12 pitches UL Class minimum please A fire inquire pitch rated recommended: for lower pitches please inquire 3:12 minimum pitch recommended: for longer Standard panel lengths 2' to 35': for longer Standard panels, please panel inquire lengths 2' to 35': for longer panels, please inquire inquire LOCK SEAM DETAIL ⅜!! 1 Premier-Lock Classic Lock Ventilated 100 Dry Seam 1½ Premier-Lock 150 1⅟ ⁸ 1½ Classic Lock 150 ACCENT RIBS STRIATED REVERSE LAP DETAIL Reversing strip Pan options: Flat Flat pan, pan, Accent Accent ribs, ribs, Striations Striations

5 TAYLOR METAL PRODUCTS MATERIAL SPECIFICATIONS 26 gauge ARMOR TECH SMP Painted Steel.019 (thickness prior to painting) AZ-50 Substrate 26 gauge bare Zincalume Plus with Clear Acrylic Coating AZ-55 KEY FEATURES 15 Standard Colors ARMOR TECH Paint System-the ultimate in exterior durabiity "Cool" color pigments are specially designed to reflect infrared light, reducing heat gain to dwelling, and conform with ENERGY STAR criteria Standard Weight Width Gauge Color LBS SQFT LBS LF ArmorTech Superior quality, two coat SMP resin system at 1.1 mils 40-year residential paint warranty fading chalking chipping cracking peeling ARMOR K TECH SMP paint layer Commercial-grade C metal primer AZ-50 G substrate 26 2 guage steel roofing panel AZ-50 G substrate Commercial-grade C metal primer Corrosion C resistant wash coat STANDARD COOL ARMOR TECH SMP COLORS 40-Year Residential Manufacturer's Limited Warranty Cocoa Brown SRI-27 Weathered Copper SRI-24 Kodiak Brown SRI-22 Zincalume Plus SRI-65 Tile Red SRI-32 Tahoe Blue SRI-25 Pacific Blue SRI-25 Sage Green SRI-31 Forest Green SRI-32 Pine Green SRI-29 Glacier White SRI-85 Light Stone SRI-68 Hickory SRI-48 Sterling Grey SRI-43 Charcoal Grey SRI-25 Black SRI-24 These printed chips provide a close representation of the colors. Metal samples are available upon request. Coatings are low gloss 10-15% sheen. "Oil canning" is an inherent characteristic of Roof & Wall products, not a defect, and is not a cause for panel rejection. SRI = Solar Reflective Index. SRI values listed above are in accordance with ASTM E 1980 and are based on actual testing. 4-17

6 StreamLine StreamLine StreamLine 1

7 2

8 3

9 4

10 StreamLine 5

11 StreamLine StreamLine StreamLine 6

12 from datum point. arc 7

13 8

14 StreamLine 9

15 10

16 11

17 hem HOOK EAVE EAVE HOOK (MES) (MEH) (EH) (MSEH) NOTE: All screws must be into solid substrate Flashing must be lapped 4" with 2 rows of non-skinning gunnable butyl 2 90 or roof pitch 1-1/2" 5/8" 4-1/4 1-1/2 1 kick 1-1/2" 3-1/2 90 or roof pitch 5/8" 12

18 StreamLine open hem specify pitch specify pitch open hem 7-3/8 7-3/8 open hem specify pitch specify pitch open hem 15-3/8 15-3/8 specify pitch specify pitch

19 StreamLine 7/8" 1-1/8 2-13/16" 3-3/16 5/8" 2-1/2" 1-1/8 1-1/8 SLG17 SLGB 2-3/4" 3-3/16 2-1/4 120º 1-1/4 120º 3/4 kick 1 2 5/8" hem 5/8" hem 5/8" 4 4 5/8" 5/8" hem 5/8" hem kick 14

20 StreamLine 1-1/8 10-3/8" open hem 2-13/16 3-3/16 5/8" 15

21 4 specify pitch 6" 1 16

22 Pitch Change Outside Notched 7-1/2 specify pitch 3-1/2" 1 Pitch Change Outside Hemmed 7 specify pitch 4-1/2" closed hem 17

23 StreamLine

24 hem StreamLine Endwall Hemmed 4 5 hem Endwall Notched 4 specify pitch 4-3/4 1 EW17 Endwall 4 spec º 1 113º 1 19

25 4 specify pitch 6 3/4 20

26 Notched 5 5 specify pitch 3/4 3/4 1 1 Hip/Ridge Hemmed /8" hem specify pitch 5/8" hem 21

27 5 5 specify pitch 3/4 3/4 5 5 specify pitch 3/4 3/4 5 5 specify pitch 3/4 3/4 22

28 8 23

29 6 6 specify pitch 3/4 3/ /8 6-3/8 specify pitch 3/4 3/4 6 6 specify pitch 3/4 3/4 1 24

30 5/8" 7-3/ /4 1 specify pitch 4" 25

31 26

32 27

33 Streamline Streamline Flashings: 12' 6" TAYLOR METAL PRODUCTS EAVE STANDARD ( SLES ) EAVE LOW ( SLELP ) 1 1/2" EAVE ( SLE1.5 ) 2" 3.5" 4" 90 OR ROOF PITCH 1.75" 90 OR ROOF PITCH 1.75" SPECIFY PITCH 1.5".625" KICK " KICK " KICK,.625" HEM, OPEN AT 145 SCALE 1:2 S.O " WEIGHT: 3.6 LBS. SCALE 1:2 S.O " WEIGHT: 5.0 LBS. SCALE 1:2 S.O. 6.75" WEIGHT: 5.8 LBS. HOOK EAVE ( SLEH ) EL X3" EAVE FLASHING ( SLE13 ) GABLE STANDARD ( SLGS ) 4.375" 3".875" 1.125" 1.125" " SPECIFY PITCH SPECIFY PITCH ".625" KICK,.625" HEM, OPEN.625" KICK 145 SCALE 1:2 S.O. 8.25" WEIGHT: 6.9 LBS. SCALE 1:2 S.O. 4" WEIGHT: 3.4 LBS. SCALE 1:3 S.O " WEIGHT: 5.4 LBS. GABLE COMPENSATING ( SLGC ) GABLE COMPENSATING HEMMED ( SLGCH ) GABLE G-17 ( SLGG17 ) 2.5" 2.5" 2.25" 1.125" " 1.125" " " 1.25" ".625 HEM, OPEN ".625" HEM, OPEN 4".625" KICK " KICK,.625" HEM, OPEN " KICK,.625" HEM, OPEN 145 SCALE 1:3 S.O " WEIGHT: 7.0 LBS. SCALE 1:3 S.O " WEIGHT: 7.9 LBS. SCALE 1:3 S.O " WEIGHT: 8.5 LBS. 28

34 Streamline Streamline Flashings: 12' 6" TAYLOR METAL PRODUCTS BOX GABLE ( SLGB ) 2" RIDGE FULL VENTED ( SLRFV ) 7".625" HEM, 4" SPECIFY PITCH SCALE 1:4.625" KICK,.625" HEM, OPEN S.O " 145 WEIGHT: 7.2 LBS..625" SCALE 1:4.75" S.O " WEIGHT: 13.8 LBS. RIDGE STANDARD (UNVENTED) ( SLRS ) 6" RIDGE HALF VENTED ( SLRHV ) 6.375" SPECIFY PITCH SPECIFY PITCH.625".75" SCALE 1:4 S.O " WEIGHT: 13.1 LBS. RIDGE VENTURI VENTED ( SLRVV ) 6".625".625".75" SCALE 1:4 S.O " WEIGHT: 13.8 LBS. WIDE RIDGE FULL VENTED ( SLRFVW ) 7".625" SPECIFY PITCH 113 TYP. UNLESS NOTED.625" OPEN HEM SPECIFY PITCH SCALE 1:5.75" S.O " WEIGHT: 13.0 LBS. R-17 FULL VENTED RIDGE ( SLR17 ) 1.125" 6.75".625" OPEN HEM 113 TYP. UNLESS NOTED SPECIFY PITCH 2" SCALE 1:5 S.O " WEIGHT: 15.6 LBS. RIDGE END NOTCHED ( SLREC ) 4.75" SPECIFY PITCH.625" KICK AT " SCALE 1:5 S.O. 2 WEIGHT: 17.5 LBS. HEMMED RIDGE END CAP ( SLRECH ) S.O " 113 WEIGHT: LBS. SCALE 1:5 6".625" KICK,.625" HEM AT 145 SPECIFY PITCH.625" SLIGHTLY OPEN HEM 4.25" SCALE 1:4 S.O " WEIGHT: 8.4 LBS. VENTED RIDGE END CAP ( SLRECV ) S.O. 15" WEIGHT: LBS. SCALE 1: ".625".75" 6" SPECIFY PITCH 113 SLIGHTLY OPEN HEM.625" KICK,.625" HEM AT " 29

35 Streamline Streamline Flashings: 12' 6" TAYLOR METAL PRODUCTS HIP STANDARD ( SLHS ) 5" HIP/RIDGE ( SLHR ) 5.625" SPECIFY PITCH.625" 0.625" HEM, OPEN SPECIFY PITCH SCALE 1:4.75" S.O " WEIGHT: 12.1 LBS. SCALE 1:4 S.O. 12.5" WEIGHT: 10.1 LBS. HIP FULL VENTED ( SLHV ) 5" HIP HALF VENTED ( SLHHV ) 5".625".75" 2X 5" SPECIFY PITCH SCALE 1:4 S.O " WEIGHT: 10.5 LBS. HIP VENTURI VENTED ( SLHVV ).625".625".75" SPECIFY PITCH SCALE 1:4 S.O. 14" WEIGHT: 11.5 LBS. VALLEY FLASHING 24" ( SLVF24 ) SPECIFY PITCH.625" SPECIFY PITCH 1.75" SCALE 1:4 S.O " WEIGHT: 11.3 LBS. VALLEY FLASHING 24" HEMMED ( SLVF24H ) ".625" HEM, OPEN SPECIFY PITCH SCALE 1:7 S.O. 24" WEIGHT: 19.6 LBS. VALLEY FLASHING ( SLVF ) 7.25".625" HEM, OPEN SPECIFY PITCH SCALE 1:7 S.O. 24" WEIGHT: 19.6 LBS. VALLEY WIDE FLASHING ( SLVFW ) SCALE 1:5 S.O " WEIGHT: 14.2 LBS..625" HEM, OPEN S.O. 35" SPECIFY PITCH " WEIGHT: 28.2 LBS. SCALE 1:5 30

36 Streamline Streamline Flashings: 12' 6" TAYLOR METAL PRODUCTS PROW ( SLPF ) SIDEWALL ( SLSW ) SIDWALL COMPENSATING ( SLSWC ).625" HEM, OPEN.875" 1.125" 4" 4" " 10.5".625" KICK " 145 2" SCALE 1:6 S.O " WEIGHT: 13.8 LBS. SCALE 1:3 S.O. 6" WEIGHT: 5.0 LBS. SCALE 1:3 S.O. 7" WEIGHT: 5.8 LBS. ENDWALL STANDARD HEMMED ( SLEWH ) ENDWALL NOTCHED ( SLEWN ) ENDWALL VENTED ( SLEWV ) 4" 4" 4" SPECIFY PITCH SPECIFY PITCH SPECIFY PITCH 5" 4.75" 6".625" HEM, OPEN.75".625" SCALE 1:3 S.O " WEIGHT: 7.9 LBS. SCALE 1:3 S.O. 9.75" WEIGHT: 8.1 LBS. SCALE 1:3 S.O " WEIGHT: 9.4 LBS. EW-17 ENDWALL ( SLEW17 ) PITCH CHANGE INSIDE NOTCHED ( SLPCIN ) PITCH CHANGE OUTSIDE NOTCHED ( SLPCON ) 4" 4" SPECIFY PITCH 7.5" SPECIFY PITCH 6" SPECIFY PITCH 3.5" 6.5" 113 TYP. UNLESS NOTED 1.5" 1.5".625" HEM, OPEN SCALE 1:4 S.O " WEIGHT: 11.5 LBS. SCALE 1:5 S.O. 1 WEIGHT: 9.1 LBS. SCALE 1:5 S.O. 12" WEIGHT: 9.9 LBS. 31

37 Streamline Streamline Flashings: 12' 6" TAYLOR METAL PRODUCTS PITCH CHANGE OUTSIDE HEMMED ( SLPCOH ) PITCH CHANGE INSIDE HEMMED ( SLPCIH ) PAN ( SLPAN ) 7" SPECIFY PITCH 4" SPECIFY PITCH SPECIFY PITCH 4.5" 6".625" HEM, CLOSED.625" HEM, CLOSED SPECIFY DIMENSIONS " STRETCH OUT SCALE 1:4 S.O " WEIGHT: 9.9 LBS. SCALE 1:4 S.O " WEIGHT: 9.1 LBS. SCALE 1:6 S.O " WEIGHT: 13.8 LBS. OFFSET CLEAT ( SLOC ) SUPPORT FLASHING (10') ( SLSF ) REVERSING STRIP ( SLSR ) 155 TYP. 1.25".5" HEM " 1.5".5" " 3.25" SCALE 1:2 S.O. 3" WEIGHT: 2.6 LBS. SCALE 1:2 S.O. 6" WEIGHT: 5.0 LBS. SCALE 1:2 S.O. 2" WEIGHT: 1.8 LBS. C-CASING STANDARD ( SLCF ) GABLE CLEAT (10') ( SLGCL ) ZEE CLOSURE ( SLZC ) 1.375" 1.25".625" HEM, CLOSED 3.875" 1.25" 2.375".5" KICK 145 SCALE 1:2 S.O " WEIGHT: 4.5 LBS. SCALE 1:2 S.O " WEIGHT: 4.5 LBS. SCALE 1:2 S.O. 3.25" WEIGHT: 2.64 LBS. 32

38 Streamline Streamline Flashings: 12' 6" TAYLOR METAL PRODUCTS STREAMLINE END DAM 2" 2" " *END DAM IS EXAMPLE ONLY. SEE SPECIFIC END DAM DETAIL SHEET FOR DIMENSIONS (SEPARATE FORM). S.O. VARIES APPLIED ON UNDERSIDE " 2" 2" WEIGHT: VARIES SCALE 1:8 RIDGE FINIAL ( SLRF ) 2" 8.375" S.O. 3.5" x 16.75" WEIGHT: LBS. 1 2" HEM, CLOSED SCALE 1:8 4" PERF STRIP (10') ( SLPS ) 4" SCALE 1:2 S.O. 4" WEIGHT: 2.5 LBS. 33

39 Custom Trim Order Customer Name: Job Name: Drawing #: Pitch: # of Pieces: Description: Hems: Open Closed Slightly Open Drawing #: Pitch: # of Pieces: Description: Hems: Open Closed Slightly Open Drawing #: Pitch: # of Pieces: Description: Hems: Open Closed Slightly Open Drawing #: Pitch: # of Pieces: Description: Hems: Open Closed Slightly Open Please provide a drawing for each flashing with precise measurements and angles Fax to: Ridge Dr NE Salem OR Phone: or

40 Fax to: Order Form New Order Add-on Order PO# Date: Inside Sales: Sold To: Job Name: Ship To: Order Contact: Phone # Fax # Will Call Delivery Date: Panels with need Pattern Choice * Color: 12" Easy-Lock* Shadow Line* 16" Easy-Lock* Soffit* 16" StreamLine* Smoothwall* Pattern Choices: T-3 Flat Striations Tuff Rib Ribs Notched? Y N Panel & Flashing Items Marion R Panel HR-34 GR7 GR5 PBR 12-3/4" MS150* 2-1/2" Corrugated 16-5/8" MS150* Classic 7/8" Corrugated 14-5/8"MS200* Pattern Choices: Ribs Flat Pitch: Striations Gauge Clip Relief? Y N Sealant? Y N Notched? Y N 14-5/8" Versa Span* 18" Versa Span* 18" MS200* *All Kynar, Easy-Lock, Soffit, & Smoothwall, Clip Lock, MS150, Versa Span, MS200 flashings are 10' *All Armor Tech 26 and 29 Gauge. StreamLine, T-3, Tuff Rib, GR7, PBR, Corrugated, & GR5 flashings are 12'6" Quantity Length Item Description Quantity Length Item Description Forgetting Anything? Underlayment? Screws? Clips? Caulking? Closures? 4566 Ridge Dr NE Salem, OR F: P

41

42

43

44 TAYLOR METAL PRODUCTS QUALITY PRODUCTS EXCEPTIONAL SERVICE SALEM BRANCH 4566 Ridge Drive NE Salem, OR Office: Toll Free: Fax: MCCLELLAN BRANCH 5711 Perrin Ave McClellan, CA Office: Toll Free: Fax: WOODINVILLE BRANCH th St. SE Woodinville, WA Office: Toll Free: Fax: AUBURN BRANCH 710 A St. NW Suite 101 Auburn, WA Office: Toll Free: Fax: RIVERSIDE BRANCH 4880 Felspar St. Riverside, CA Office: Toll Free: Streamline Installation Guide Taylor Metal Products