TEKS LIGHT DUTY STEEL - TO - STEEL APPLICATIONS PRODUCT REPORT NO Self-Drilling Fasteners

Transcription

1 TEKS SelfDrilling s Preferred most by electrical, decking, HVAC and metal building contractors. Stitch roof deck and wall panel sidelaps. HVAC, electrical trim accessories to steel framing. Residential steel frame construction. Product Features Sharp convex drill point has precise cutting edges to improve drill performance with less effort. Nonwalking point provides fast material engagement. Unique point to thread design extrudes the metal preventing stripout. x 7/8 Teks Now Available with ABOT (AntiBackout Threadform) Product Specifications Diameter...#6, #8, #0, # and Thread Form , 0 Head Style...#6: # Phillips Pan #8: HWH; # Phillips Pan #0: /'' HWH; /'' HWH with Serrations; # Phillips Pan; # Phillips Oval #: /'' HWH : /'' HWH Drill Point...Teks Teks Teks Finish...#6, #8, Electrozinc #0, # and Climaseal Approvals and Listings Factory Mutual (J.I. X 9A AM), ICC ER06, ICC ESR976 Brick ties to steel framing. Track to stud and stud splicing. Hat channel to stud. Point to thread design maximizes pullout performance and minimizes backout. Four head styles available to handle various applications. Climaseal finish provides excellent corrosion resistance and lower tapping torque. Hex Washer Hex Pan Head Head Styles Oval Head Hex Washer Head with Serrations LIGHT DUTY STEEL TO STEEL APPLICATIONS PRODUCT REPORT NO. 070

2 TEKS SELFDRILLING FASTENERS Selector Guide * With serrations under head. Electrozinc finish. #6 #8 #0 # A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screwgun should be a minimum of 4 amps and have a RPM range of 00. Remove chip buildup as needed Gauge No. Decimal Equivalent.0''.07'' 8.06''.00''.0''.08'' The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design purposes. Part Number Description Head Style Drill Point Drill & Tap Capacity Max. Material Attachments Box Qty x /8'' Pan # , x /8'' HWH #.06.00, x /'' Pan #.06.00, x /'' Pan # , x /4'' Pan # , x '' Pan # , x /'' HWH # , x /8'' HWH # , x /4'' HWH # , x '' HWH # , x /'' HWH # , x /4'' HWH # , x /4'' HWH # , x 7/8'' HWH # , x /'' Pan # , X /8'' Pan # , x /4'' Pan #.06.7., x /4'' Oval #.06.7., x /" HWH # , x /8" HWH # , x /4" HWH #.06.7., x " HWH # , x '' Oval # , x '' Pan # , x " HWH # , x '' Oval # , x /" HWH # , x /4'' HWH #.06.7., x '' HWH # , x /8'' *HWH # , x /4'' *HWH #.06.7., x /4'' *HWH #.06.7.,000 (diatpi) #6 #8 #0 # (lapped) Product Report No HVAC, electrical trim accessories to steel framing Residential steel frame construction Track to stud Hat channel to stud Stud splicing Tensile (lbs. min.) Stitching roof deck, wall panel sidelaps or duct work Clips, duct straps, brick ties or accessories to steel framing Vibration resistance; HVAC. Shear (avg. lbs. ult.) Torque (min. in. lbs.) The fastener is fully seated when the head is flush with the work surface. minimum of pitches of thread. 49 West Bryn Mawr Avenue Itasca, Illinois Fax: ITW Buildex and Illinois Tool Works, Inc.

3 TEKS SELFDRILLING FASTENERS Selector Guide Part Number Description Head Style Drill Point Drill & Tap Capacity Max. Material Attachment Box Qty 4000 x /4'' HWH # , x '' HWH # , x '' HWH # , x /'' HWH # , x '' HWH # , X /'' HWH # , x '' HWH # , x 4'' HWH # x /4'' HWH #.06.., x '' HWH # , x '' HWH # , x /'' HWH # , x '' HWH # , x /'' HWH # , x '' HWH # , x 4'' HWH # x /4'' *HWH #.06.., x '' *HWH # ,00 * 7/ Across Flats HWH with serrations under head. Product Report No. 070 Roof deck to steel framing Wall panel to girt Duct work to steel framing Accessories to steel framing Clip to steel framing Retrofit framing Commercial overhead steel doors, hinges & latches. (diatpi) Tensile (lbs. min.) Shear (avg. lbs. ult.) / Torque (min. in. lbs.) 9 0 (lapped) Gauge No. Decimal Equivalent.0''.07'' 8.06''.00''.0'' '' The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design purposes. A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have an RPM range of 00. Remove chip buildup as needed. The fastener is fully seated when the head is flush with the work surface. minimum of pitches of thread. 49 West Bryn Mawr Avenue Itasca, Illinois Fax: ITW Buildex and Illinois Tool Works, Inc. 8

4 TEKS SelfDrilling s First in performance!! Over 40 years of consistent drilling. The original selfdrillers for heavy duty applications. Metal deck to structural steel or bar joist. Clips to structural steel or bar joist. Liner panels to structural steel or bar joist. Product Features Unique double fluted point has precise cutting edges to improve drill performance in thru /'' steel. Engineered for fast drilling and smooth tapping with less effort. Climaseal finish provides excellent corrosion resistance and lower tapping torque. Product Specifications Diameter...#, Thread Form..., 8 Head Style...#: /'' HWH : /'' HWH : /8'' HWH Drill Point...Teks 4 Teks 4. Teks Finish...Climaseal Approvals and Listings Factory Mutual (J.I. X 9A AM), ICC ER06, ICC ESR976 9 Accessories to structural steel or bar joist. Longer length fasteners can be used in retrofit clip and sheet applications. Attachments up to 7.'' of material including /'' steel. Diameter has notched threads to reduce tapping torque. Head Style Hex Washer Head HEAVY DUTY STEEL TO STEEL APPLICATIONS PRODUCT REPORT NO. 070

5 TEKS SELFDRILLING FASTENERS Selector Guide Product Report No. 070 Part Head Drill Drill & Tap Max. Material Box Number Description Style Point Capacity Attachment Qty x 7/8'' HWH #4..., x '' HWH # , x '' HWH # , x /'' HWH #..00.6, x /'' **HWH #..00.6, x '' HWH #..00., x '' *HWH #..00.0, x 4'' *HWH # x '' HWH # x 6" HWH # x 8" HWH # All available with bonded washer / (diatpi) T/4 T/4. T/ 8 T/ * / Across Flats HWH ** /8 Across Flats HWH Tensile Shear Torque (lbs. min.) (avg. lbs. ult.) (min. in. lbs.) Gauge No. Decimal Equivalent.0''.07'' 8.06'' Metal deck, clips, liner panels or accessories to structural steel or bar joist. Longer fasteners can be used in retrofit clip and sheet applications..00'' (lapped) / ''.08'' Note: Teks fasteners are not categorized as structural bolts. Proper design criteria and strengths must be used for satisfactory application.the values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design purposes. A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have an RPM range of 00. (Maximum 800 RPM is recommended for Teks fasteners) Remove chip buildup as needed. The fastener is fully seated when the head is flush with the work surface. minimum of pitches of thread. 49 West Bryn Mawr Avenue Itasca, Illinois Fax: ITW Buildex and Illinois Tool Works, Inc.