Reference: RAC-en Date: 24/01/18 Revision: 5 Page: 1 of 8 PRODUCT FEATURES BENEFITS BASE MATERIALS ASSESSMENTS

Transcription

1 Reference: RAC-en Date: 24/01/18 Revision: 5 Page: 1 of 8 MTP MTP-X MTP-G Torque controlled expansion. Solid impact section Embedment depth mark. Three way expansion clip. Variety of lengths Previous installation, or through the fixture hole itself. Suitable for tensioned concrete areas Cold forming Easy setting parameters. Avoid thread damage Adaptable for various fixing thicknesses. Uniform distribution of load Assembly flexibility. Wide choice in applications. No removal of steel fibers Fire resistance R30 to R120 Seismic applications categories C1 and C2 (MTP, MTP-X and MTP-A4) MTP-A4 MTH MTH-A4 Torque controlled expansion. Double embedment depth mark. Variety of lengths Previous installation, or through the fixture hole itself. Cold forming. Easy setting parameters. Adaptable for various fixing thicknesses. Assembly flexibility. No removal of steel fibers.

2 Reference: RAC-en Date: 24/01/18 Revision: 5 Page: 2 of 8 TH-DEX TH-DAV The screw anchor is driven in without a plug. Fast and easy mounting. Connection free of expansion pressure. No time wasting, the anchor will bear loads immediately. High security level. No torque control required. Easy power-tool handling possible. Up to 50% reduction in installation times Through-hole installation is always possible. Let s you work close to edges. No cure times, instant loading of anchor. No specified installation torque. Can be completely removed. Fire resistance R30 to R120. SL-RT Torque controlled expansion. Sleeve anchor with 8.8 grade steel. Collapsible element in anchor Easy assembly. Easy setting parameters. Very high shear load No rotation in overhead installations, bridges, gaps, no rotation while torqueing. Suitable for various applications. Fire resistance R30 to R120. Seismic applications category C1

3 Reference: RAC-en Date: 24/01/18 Revision: 5 Page: 3 of 8 SL-VT Torque controlled expansion. Sleeve anchor with 8.8 grade steel. Collapsible element in anchor Easy assembly. Easy setting parameters. Very high shear load Highest tension loads in uncracked concrete Suitable for various applications. HE-HO Surface level installation finish, and female thread. Flared end (HECLO) Manual setting tool Bolt not supplied HE-CL Possible to dismount at any time, and reinstall again. Stays flush with surface. Visual verification of setting. Fire resistance R30 to R120 Structural and non-structural applications HC Expansion sleeve with engaged cone. Easy instalaltion. Bolt not supplied. Sizes compatible with threaded rods M6, M8 and M10. Suitable for installation in hollow areas of prestressed hollow core concrete slabs. Stays flush with surface. Valid for Fixing threaded rods of cable trays and piping support installations. Fire resistance R30 to R120. Non-structural applications. Prestressed slabs

4 Reference: RAC-en Date: 24/01/18 Revision: 5 Page: 4 of 8 AN-CU Body with expansión nail Easy installation Two lengths 40 y 70 mm. Valid for installation in ceilings and other uses in concrete. Fire resistance R30 to R120. Non-structural applications T-NUX A T-NUX E Universal anchor for all base material. Wide range head versions. Big collar version. Makes a knot in hollow base materials Multipurpose anchor for multiple applications. Flexibility in applications. Avoid galvanic corrosion. Fire resistance R30 to R120 T-NUX T T-FUX E

5 Reference: RAC-en Date: 24/01/18 Revision: 5 Page: 5 of 8 MOPOLY Versatile and cost effective anchoring system. Winter and stone versions available Approved to be used in dry, wet or flooded holes. 170 ml cartridges available General purpose chemical anchoring. Approved for overhead installation. Usable for a wide range of climate conditions. Wide range of applications. Solid and hollow brick and porotherm MOPOSE Winter, summer and stone versions available Approved to be used in dry, wet or flooded holes. Independent approval for Solid and Hollow bricks Approved for overhead installation. Usable for a wide range of climate conditions. Solid and hollow brick and porotherm MOPOSEP

6 Reference: RAC-en Date: 24/01/18 Revision: 5 Page: 6 of 8 MOEPOX Higher bond strength than polyester. Approved to be used in dry, wet or flooded holes. Suitable for more demanding applications. Approved for overhead installation. Wide range of applications. MOEPSE MOEPSE-W Winter & summer versions available. High load capacity & optimal displacement behavior. Independent approval for Post installed rebar connections. Independent approval for Hollow bricks Usable for a wide range of climate conditions. Higher security due to very small displacement. Seismic applications category C1 WRAS certificate of material admitted for use in contact with drinking water. IBMB certificate of behavior of material in contact with fire. Cracked and Non cracked concrete Solid and hollow brick and porotherm

7 Reference: RAC-en Date: 24/01/18 Revision: 5 Page: 7 of 8 Hormigón no fisurado MOVISE The most environmentally friendly resin system within our range Independent approval for Post installed rebar connections. Independent approval for Solid and Hollow bricks Approved to be used in dry or wet holes. Approved for overhead installation. Drinking Water System Components approved. ANSI/NSF61 IBMB certificate of behavior of material in contact with fire. Solid and hollow brick and porotherm MOPURE Very low shrinkage. Highest bond strength. Long working time at elevated temperature. Approved to be used in dry or wet holes. Independent approval for Post installed rebar connections. Makes it very effective even with higher diameters. Enough working time for aligning work. Reduced spacing and edge distances Seismic applications category C1

8 Reference: RAC-en Date: 24/01/18 Revision: 5 Page: 8 of 8 MOPUR3 Very low shrinkage. Highest bond strength. Long working time at elevated temperature. Approved to be used in dry or wet holes. Independent approval for Post installed rebar connections. Makes it very effective even with higher diameters. Enough working time for aligning work. Reduced spacing and edge distances WRAS certificate of material admitted for use in contact with drinking water. IBMB certificate of behavior of material in contact with fire. CA-QU EQ-AC (Zinc plated) EQ-A2 (Stainless steel A2) Working by adherence. Small drilling diameters. Sizes available from M8 to M30 Results in smaller edge distance & spacing. Less drill cost. Wide range of applications. EQ-A4 (Stainless steel A4)