COMMERCIAL FLOORING.

Transcription

1 COMMERCIAL FLOORING Combine colour, performance and design to deliver a durable floor finish in commercial venues and retail environments.

2 Commercial Flooring Technical Profile Flowcrete s Commercial Flooring range has been developed to deliver the ultimate in aesthetic appeal, without compromising on performance. Available in a range of attractive finishes, from luxurious terrazzo and stone look systems to unique metallic surfaces, our seamless resin flooring solutions provide an appealing platform underfoot. Durable formulations take heavy footfall and exposure to detergents and corrosive agents in their stride, ideally suited to busy public venues that might be subject to spillages and daily cleaning regimes. Added benefits of impressive slip resistance, noise reduction and versatility result in a range of flooring solutions perfect for a variety of commercial environments. Application Suitability Retail Boutiques Shopping Centres Stadiums & Arenas Airports & Terminals Educational Facilities Automotive Showrooms

3

4 Mondéco EP (8 mm) A low odour, seamless resinbased decorative terrazzo floor finish which features Australian marble aggregates. Typically used in high-end commercial developments, airports and shopping centres. Technical Profile FIRE RESISTANCE AS/ISO SLIP RESISTANCE Method described in AS TEMPERATURE RESISTANCE CHF Value: 9.5 kw/m² Smoke Value: 266 % (Mean) Dry & Wet Rating is dependent on specification Tolerant of sustained temperatures up to 60 C WATER PERMEABILITY Karsten Test Nil (Impermeable) Flexible Design: Offers extensive design potential to deliver the wow-factor underfoot. Long Life Span: Highly durable finish provides a long life cycle solution. Chemical Resistant: Resistant to a wide range of chemicals and cleaning solutions. Low Odour: Provides a low odour resin flooring solution. CHEMICAL RESISTANCE Contact Technical Department ABRASION RESISTANCE BS Grade AR2 COMPRESSIVE STRENGTH EN >55 N/mm² FLEXURAL STRENGTH EN >20 N/mm² TENSILE STRENGTH BS 6319 >10 N/mm² BOND STRENGTH ASTM D4541 (Pull-Off Test) >1.5 MPa** Mondéco Sealer Mondéco Grout SPEED OF CURE*** 10 C 20 C 30 C Light Traffic 24 hrs 20 hrs 16 hrs Full Traffic 72 hrs 48 hrs 36 hrs Full Chemical Cure 12 days 7 days 6 days These figures are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Flowprime Quartz Scatter Mondéco EP *The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/or surface contaminants (wet or dry) please contact our Technical Advisors for further details. **Assumes concrete compressive strength is greater than 25N/mm² ***For full speed of cure details, contact our Technical Advisors.

5

6 Mondéco Rapide (8 mm) An innovative, rapid curing, seamless, resin-based decorative terrazzo floor finish which features Australian marble aggregates. Typically used in high-end commercial developments, airports and shopping centres. Technical Profile FIRE RESISTANCE AS/ISO SLIP RESISTANCE Method described in AS TEMPERATURE RESISTANCE CHF Value: 5.7 kw/m² Smoke Value: <4 % (Mean) Dry & Wet Rating is dependent on specification Tolerant of sustained temperatures up to 60 C WATER PERMEABILITY Karsten Test Nil (Impermeable) Flexible Design: Offers extensive design potential to deliver the wow-factor underfoot. Rapid Installation: Quick curing properties reduce downtime during installation. Versatile: Can be overlaid onto tiles making it ideal for refurbishments. Aesthetically Attractive: Features local Australian marble chip aggregates that provide a luxury finish. CHEMICAL RESISTANCE Contact Technical Department IMPACT STRENGTH ISO Nm WEAR RESISTANCE EN Max. wear depth <5 µm BOND STRENGTH ASTM D4541 (Pull-Off Test) >1.5 MPa** SPEED OF CURE*** Light Traffic 1 hr Full Traffic 2 3 hrs Mondéco Sealer Mondéco Grout Full Chemical Cure 2 3 hrs These figures are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. *The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/or surface contaminants (wet or dry) please contact our Technical Advisors for further details. **Assumes concrete compressive strength is greater than 25N/mm² ***For full speed of cure details, contact our Technical Advisors. Flowprime Quartz Scatter Mondéco Rapide

7

8 Flowshield Stone (3 4 mm) A highly decorative, UV, wear and chemical resistant resinbased flooring system featuring a decorative stone look blend. Typically used in areas with heavy foot traffic including stadiums, arenas, malls and airports. Decorative: Featuring decorative coloured stone look blends within the resin matrix. Easy to Clean: Seamless and hygienic finish that is easy to clean and maintain. Chemical Resistant: Provides resistance against a range of chemicals. Durable: Hard wearing and abrasion resistant against heavy foot and trolley traffic. Technical Profile FIRE RESISTANCE EN SLIP RESISTANCE Method described in AS TEMPERATURE RESISTANCE B FL - s1 Dry & Wet Rating is dependent on specification Tolerant of sustained temperatures up to 60 C WATER PERMEABILITY Karsten Test CHEMICAL RESISTANCE Contact Technical Department ABRASION RESISTANCE Taber Abrader BS8204:Part 2:2002 IMPACT RESISTANCE ISO 6272 FLEXURAL STRENGTH BS 6319 TENSILE STRENGTH BS 6319 Nil (Impermeable) Class AR2 - Medium duty industrial and commercial 1 kg weight >1.8 m 2 kg weight >1.5 m 15 N/mm² 10 N/mm² BOND STRENGTH Sealer Coats Sacrificial Polish ASTM D4541 (Pull-Off Test) >1.5 MPa** SPEED OF CURE*** 10 C 20 C 30 C Light Traffic 36 hrs 24 hrs 16 hrs Full Traffic 48 hrs 36 hrs 24 hrs Full Chemical Cure 12 days 7 days 6 days These figures are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Primer Coat Binder Coat Decorative Stone Look Blend *The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/or surface contaminants (wet or dry) please contact our Technical Advisors for further details. **Assumes concrete compressive strength is greater than 25N/mm² ***For full speed of cure details, contact our Technical Advisors.

9

10 Metallic Expressions (1.5 2 mm) A highly decorative, hard wearing, advanced floor finish that provides a unique metallic finish that creates impact underfoot. Typically used in retail stores, modern boutiques and hospitality venues. Attractive: Offers a decorative, metallic and multi-dimensional finish. Bespoke Design: Provides clients with diverse design potential. Easy to Clean: Delivers a hygienic smooth surface that is easy to clean and maintain. Durable: Provides a durable and wear resistant platform underfoot. Technical Profile FIRE RESISTANCE EN SLIP RESISTANCE Method described in AS TEMPERATURE RESISTANCE B FL - s1 Dry & Wet Rating is dependent on specification Tolerant of sustained temperatures up to 60 C WATER PERMEABILITY Karsten Test CHEMICAL RESISTANCE Contact Technical Department ABRASION RESISTANCE Taber Abrader BOND STRENGTH ASTM D4541 (Pull-Off Test) SURFACE HARDNESS Koenig Hardness Test Nil (Impermeable) 50mg loss per 1000 cycles (1 kg load using CS17 wheels) >1.5 MPa** 180 secs. SPEED OF CURE*** 20 C 35 C Light Traffic 19 hrs 15 hrs Metallic Sealer Metallic Expressions Full Traffic 24 hrs 20 hrs Full Chemical Cure 7 days 6 days These figures are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. *The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/or surface contaminants (wet or dry) please contact our Technical Advisors for further details. **Assumes concrete compressive strength is greater than 25N/mm² *** Low relative humidity and good ventilation are pre-requisites to achieving the above drying times. For full speed of cure details, contact our Technical Advisors. Metallic Primer (Second Coat if Required) Metallic Coating

11

12 Flowcoat SRQ (2 mm) A decorative epoxy resin-based flooring system featuring coloured quartz granules that provides a non-slip platform underfoot. Typically used for internal environments which require a decorative non-slip finish. Decorative: Featuring decorative coloured quartz aggregates in a wide range of colours. Slip Resistant: Textured aggregates provide non slip traction underfoot. Durable: Hard wearing, durable and abrasion resistant. Aesthetic: Decorative floor suited to both commercial and industrial facilities. Technical Profile FIRE RESISTANCE EN SLIP RESISTANCE Method described in AS TEMPERATURE RESISTANCE Tolerant up to 60 C WATER PERMEABILITY Karsten Test CHEMICAL RESISTANCE Contact Technical Department FLEXURAL STRENGTH EN TENSILE STRENGTH BS 6319 IMPACT RESISTANCE ISO 6272 BOND STRENGTH ASTM D4541 (Pull-Off Test) SURFACE HARDNESS B FL - s1 Dry & Wet Rating is dependent on specification Nil (Impermeable) 15 N/mm² 10 N/mm² 1 kg weight >1.8 m 2 kg weight >1.5 m >1.5 MPa** Koenig Hardness Test 180 secs. Flowseal UV (Optional) Flowtex Sealer SPEED OF CURE*** 10 C 20 C 30 C Light Traffic 36 hrs 24 hrs 18 hrs Full Traffic 72 hrs 48 hrs 36 hrs Full Chemical Cure 12 days 7 days 6 days These figures are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Flowprime Flowcoat OP Coloured Quartz Aggregate *The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/or surface contaminants (wet or dry) please contact our Technical Advisors for further details. **Assumes concrete compressive strength is greater than 25N/mm² *** Low relative humidity and good ventilation are pre-requisites to achieving the above drying times. For full speed of cure details, contact our Technical Advisors.

13 Rustik + UV (6 mm) A stone carpet system that uses colourful stone aggregates binded with a clear resin to provide a natural looking interior floor finish. Technical Profile SLIP RESISTANCE* Method described in AS THERMAL RESISTANCE Dry & Wet Rating is dependent on specification Tolerant of sustained temperatures up to 60 C ABRASION RESISTANCE Suitable for car showrooms, retail stores, reception halls and commercial spaces. Taber Abrader BS8204:Part 2:2002 COMPRESSIVE STRENGTH Class AR2 Medium duty industrial and commercial Rustik Attractive: A natural looking floor finish that is available in a range of colours. UV Stable: 100% UV light stable and suitable for outdoor use. Hard Wearing: Hard wearing & abrasion resistant, suitable for regular foot traffic. Versatile: Quick to install and can be applied to most substrates. Flowprime Topcoat Sand (16 30 Mesh) BS 6319 FLEXURAL STRENGTH BS 6319 BOND STRENGTH ASTM D4541 (Pull-Off Test) CHEMICAL RESISTANCE Contact Technical Department TOXICITY Taint free to sensitive foodstuffs. *The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/or surface Label contaminants (wet or dry) Label please contact our Technical Label Advisors for further details. **Assumes concrete compressive strength is greater than 25N/mm² ***Low relative humidity and good ventilation are pre-requisites to achieving the above drying times. For full speed of cure details, contact our Technical Advisors. Label Insert System Diagram Label >30 N/mm² 10 N/mm² >1.5 MPa** SPEED OF CURE** 10 C 20 C 30 C Light Traffic 36 hrs 24 hrs 16 hrs Full Traffic 72 hrs 48 hrs 36 hrs Full Chemical Cure 12 days 7 days 6 days These figures are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Label *Assumes concrete compressive strength is greater than 25N/mm 2 ** Cure times at temperatures between 0-30 C can be achieved by altering the quantity of catalyst used. For applications falling outside of this temperature range, please contact your local Flowcrete Technical Department.

14 Flowcoat Terrosso (1.5 3 mm) Highly decorative, epoxy resin-based flooring systems featuring decorative flake blends and optional light nonslip aggregates for safety underfoot. Available as a gloss or satin coating with a smooth or light non-slip finish. Technical Profile FIRE RESISTANCE EN B fl -s1 SLIP RESISTANCE* Method described in AS THERMAL RESISTANCE Dry & Wet Rating is dependent on specification Tolerant of sustained temperatures up to 60 C WATER PERMEABILITY Karsten Test Nil (Impermeable) Optional Top Coat Decorative: Featuring decorative acrylic flake blends within the resin matrix. Easy to Clean: Seamless and hygienic finish is easy to clean and maintain. Non Slip Available: Available in smooth or light non-slip gloss or satin finish. Durable: Hard wearing, durable and abrasion resistant. Chemical Resistant: Provides resistance against a range of chemicals. Flowprime Flowtex Sealer Flowcoat OP For Light Non-Slip Systems: Aluminium Oxide Acrylic Paint Flakes ABRASION RESISTANCE Taber Abrader BS8204:Part 2:2002 IMPACT RESISTANCE ISO 6272 FLEXURAL STRENGTH BS 6319 TENSILE STRENGTH BS 6319 BOND STRENGTH ASTM D4541 (Pull-Off Test) CHEMICAL RESISTANCE Contact Technical Department Class AR2 Medium duty industrial and commercial 1 kg weight >1.8 m 2 kg weight >1.5 m 15 N/mm² 10 N/mm² >1.5 MPa** SPEED OF CURE** 10 C 20 C 30 C Light Traffic 36 hrs 24 hrs 16 hrs Full Traffic 72 hrs 48 hrs 36 hrs Full Chemical Cure 12 days 7 days 6 days These figures are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. *The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/or surface contaminants (wet or dry) please contact our Technical Advisors for further details. **Assumes concrete compressive strength is greater than 25N/mm² ***Low relative humidity and good ventilation are pre-requisites to achieving the above drying times. For full speed of cure details, contact our Technical Advisors. ** Cure times at temperatures between 0-30 C can be achieved by altering the quantity of catalyst used. For applications falling outside of this temperature range, please contact your local Flowcrete Technical Department.

15

16 Flowcrete World leader in seamless resin flooring solutions and other specialist coatings. Africa South Africa Asia Pacific (APAC) Australia australia@flowcrete.com Bangladesh bangladesh@flowcrete.com Hong Kong hongkong@flowcrete.com Indonesia indonesia@flowcrete.com Korea korea@flowcrete.com Malaysia asia@flowcrete.com New Zealand newzealand@flowcrete.com Pakistan pakistan@flowcrete.com Philippines philippines@flowcrete.com Singapore singapore@flowcrete.com Taiwan taiwan@flowcrete.com Thailand thailand@flowcrete.com Vietnam vietnam@flowcrete.com Europe & Middle East (EME) Bulgaria bulgaria@flowcrete.com Denmark denmark@flowcrete.com France france@flowcrete.com Italy italy@flowcrete.com Norway norway@flowcrete.com Poland poland@flowcrete.com Romania romania@flowcrete.com Russia russia@flowcrete.com Spain spain@flowcrete.com Sweden sweden@flowcrete.com Turkey turkey@flowcrete.com UAE uae@flowcrete.com UK +44 (0) uk@flowcrete.com India India india@flowcrete.com North America Canada canada@flowcrete.com Mexico mexico@flowcrete.com USA americas@flowcrete.com *Whilst every care has been taken to ensure that the information included in this document was accurate at the time of printing, Flowcrete reserves the right to change product specifications at any time without prior notice. The photographs and colours reproduced in this publication are within the constraints of the printing process and are not to be used for matching purposes. All photographs are used for approximate representation only and may not show the actual products on offer. E&OE