9B1101 Elite Referee Shelter. SECTION Benches 1.1 WORK INCLUDED

Transcription

1 9B1101 Elite Referee Shelter SECTION Benches PART 1 GENERAL 1.1 WORK INCLUDED A. Provide all equipment and materials, and do all work necessary to furnish and install the athletic equipment, as indicated on the drawings and as specified herein. Athletic equipment shall include, but not be limited to: 1. 9B1101 Elite Referee Shelter 1.2 RELATED WORK A. Examine contract documents for requirements that affect work of this section. Other specification sections that directly relate to the work of this section include, but are not limited to: 1. Section Earthwork; Excavation and Fill, Subgrade Preparation 2. Section Concrete; Concrete Footing Schedule 3. Section Cast-in-Place Concrete 4. Section Athletic and Recreational Surfacing 5. Section Synthetic Grass Surfacing 6. Section Athletic Surfacing 1.3 REFERENCES A. Comply with applicable requirements of the following standards. Where these standards conflict with other specified requirements, the most restrictive shall govern. 1. Federation International de Football Association (FIFA) 2. United States Soccer Federation 3. National Collegiate Athletic Association (NCAA) 4. National Federation of State High School Associations (NFSHSA) 5. International Amateur Athletic Federation (IAAF) Athletic Field Equipment Kwik Goal Ltd Page 1

2 1.4 SUBMITTALS A. Manufacturer s Product Data 1. Provide manufacturer s product literature, technical specifications and other data prior to actual field installation work for architect or owner s representative review. B. Shop Drawings 1. Provide drawings of manufacturer s recommended installation and foundation requirements prior to actual field installation work for architect or owner s representative review. 1.5 QUALITY ASSURANCE A. Manufacturer s warranties shall pass to the owner and certification made that the product materials meet all applicable grade trademarks or conform to industry standards and inspection requirements. 1.6 PRODUCT DELIVERY, STORAGE AND HANDLING A. Material delivered to the site shall be examined immediately for concealed damage or defects and noted on the carriers deliver receipt. If any damage is discovered after the initial delivery, you have 15 calendar days to notify Kwik Goal, Ltd. If the damage is reported within 15 days, Kwik Goal, Ltd. Will replace any damaged parts at no charge. If damage is discovered after 15 calendar days, the parts will need to be purchased in full from Kwik Goal, Ltd. B. Replacements, if necessary, shall be immediately re-ordered, so as to minimize any conflict with the construction schedule. C. Sound materials shall be stored above the ground under protective cover or indoors so as to provide proper protection. Athletic Field Equipment Kwik Goal Ltd Page 2

3 PART 2 PRODUCTS 2.1 MANUFACTURERS A. Manufacturers and product selections named are provided to establish the minimum standard. B. BASE: 9B1101 Elite Referee Shelter as manufactured by: Kwik Goal Ltd. 140 Pacific Drive Quakertown, PA P: F: C. COMPONENTS: 1. 9B1101 Elite Referee Shelter A. 9B1101 frame, fabricated of 6005 T5 aluminum, 4.00 outside diameter, having the following attributes 1. Round, with V track net channel, extruded wall aluminum tube 3. DuPont powder coated (custom color) i. Rail (2) 1. Length: ii. Post (2) 1. Length: iii. Base (2) 1. Length: Corners MIG weld iv. Top corners (2) 1. Height: Depth: v. Base corners 1. Height: Depth: Athletic Field Equipment Kwik Goal Ltd Page 3

4 B. 9B1101 rear shelter panel (3) fabricated of 6063 T4 aluminum, x and smoke colored Lexan, having the following attributes: 1. Height: Width: Depth: wall aluminum 5. DuPont powder coated (custom color) i. Brace fabricated of 6005 T5 aluminum, 1.25 x 1.25, having the following attributes: 1. Length: Square, extruded wall aluminum 4. DuPont powder coated (custom color) C. 9B1101 side panel (2) fabricated of 6063 T4 aluminum tube, x 1.531, and smoke colored Lexan, having the following attributes: 1. Height: Depth: wall aluminum 4. DuPont powder coated (custom color) i. Brace fabricated of 6005 T5 aluminum tube, 1.25 x 1.25, having the following attributes: 1. Length: Square, extruded wall aluminum 4. DuPont powder coated (custom color) D. 9B1101 seat, back rest and shelf, fabricated of 6063 T6 aluminum, having the following attributes: 1. Length: Height: Width: wall aluminum 5. Clear anodized Athletic Field Equipment Kwik Goal Ltd Page 4

5 E. 9B1101 bench frame with back (2) fabricated of 6063 T6 aluminum, 2.00 x 2.00, having the following attributes 1. Square, extruded wall aluminum 3. Mill finish i. Front upright 1. Length: ii. Rear upright 1. Length: iii. Bench support 1. Length: F. 9B1101 seat support (2), fabricated of 6063 T6 aluminum, 2.00 x 2.00, having the following attributes: 1. Square, extruded wall steel 3. Mill finish i. Upright 1. Length: ii. Bench support tube 1. Length: G. Accessories 1. Hardware i. Stainless Steel 2. Anchors i. Fabricated of zinc plated steel ii. Length: 12 11/16 3. Anchor chain i. Zinc plated steel ii. Length: Athletic Field Equipment Kwik Goal Ltd Page 5

6 PART 3 EXECUTION 3.1 INSTALLATION OF ATHLETIC FIELD EQUIPMENT A. All athletic field equipment shall be installed as recommended with manufacturer s written directions, included with product or found at and as indicated on the drawings. 1. This equipment must be stored in a secure, sheltered area when not in use or in the threat of high winds. Any weather damage to this equipment will not be covered under Kwik Goal s Lifetime Guarantee. Do not leave this equipment unattended. END OF SECTION Athletic Field Equipment Kwik Goal Ltd Page 6