PRODUCT BROCHURE. RMD Australia. Minima

Transcription

1 RMD Australia Minima

2 Desalination Plant in Adelaide Product Overview Faster Efficient tie hole positioning reduces the number of ties required, lowering costs and construction times Modular components reduces the time to assemble and dismantle the panels Minima has an extensive range of accessories that enable quick erection and stripping of the system Safer Few loose fittings make it easy and convenient to connect the panels by using Minima clamps - no special tools are required Minima is a robust, wall formwork panel system for concrete loads of up to 60kPa Easier Many of Minima's panels are lighterweight (only 30kg/m2), which means most panels are easily set by hand, minimising the need for cranage, reducing costs and skilled labour requirements Minima has either a high quality ply face or a composite face, which lasts longer, provides a better finish and is easier to clean Panels can be clamped together and up to 25m2 can be lifted by crane if required, increasing the productivity of the system Minima inner corners have a 2 degree stripping clearance, which allows panels to be easily removed once curing has taken place Clamps are easily tightened, prolonging their working life and reducing labour requirements Minima has many different panel sizes ensuring that virtually any wall can be erected. Furthermore, composite panels are available for longer life and a better finish 1

3 Water Corporation, WA Applications With 18 panel sizes, including 2.7 x 2.4m, available, Minima can easily be assembled into most layout combinations and pour heights and because many of the panels are lighter weight than similar systems, they can be set by hand, providing greater productivity. Walls Columns Buttresses Culverts Abutments and piers Service cores Basements Tanks Foundations Pile caps 2

4 Amco Bottle Factory, SA Wagga Wagga Sewerage Treatment Plant Features and Benefits Lightweight panels Panels are only 30kg/m2 so most of them are easily set by hand, minimizing the need for cranage, reducing costs and skilled labour requirements. Simple clamping system The Minima clamps are easy to use, which reduces the time needed to complete the project. Increased productivity The productivity of Minima is improved when its clamped together (up to 25m2) and lifted by crane to the next pouring location. Ply or composite face Minima can have either a high quality ply face or a composite face, which lasts longer, provides a better finish and is easier to clean Versatile Available in 18 panel sizes, including a panel that's 2.7 x 2.4m, virtually any configuration can be erected. Clever design Tie positions support 1.21m2 of formwork when using 2.7 x 0.9m panel assemblies, reducing the number of ties required, lowering costs and construction times. Easy stripping Once sufficient curing has taken place Minima inner corners can easily be removed because of their 2 degree stripping clearance. Panels moved whilst clamped 3

5 Airport Link, Brisbane Cemex Batch Plant In Detail System Modular components Reduces the time to assemble and dismantle the system. Few loose fittings It is easy to connect the panels by using the Minima clamps, no special tools are required. High concrete pressure Minima is suitable for concrete pressures up to 60kN/m2 for single tie and 55kN/m2 for height extended forms. Minimises the use of form ties, reducing the number of components required. Handset formwork Most of Minima's panels can be set without a crane, substantially reducing cost. Hot-dip galvanised frame Increase panel's life cycle and reduce maintenance costs. Wide range of panel sizes With three different height sizes and five different width sizes, with 18 different panel sizes overall, including 2.7 x 2.4m, Minima can be adopted to almost every project. 4

6 Transgrid, Newcastle Happy Valley Wave Wall In Detail Innovative Components The Minima multi purpose panel With horizontal tie holes at 50mm intervals, Minima can be used in special applications such as wall offsets, corners with oblique angles and pilaster. Minima external corner clamp Can join two standard panels together and skip the requirement of using an external corner panel. Minima adjustable clamp Joins panels and fillers together and allows up to 150mm of infill adjustment. Minima hinge corner Can be used in a wide range of internal and external angles. 5

7 Project References Lynwood Quarry Project - Minima Australia & New Zealand Industrial, Mining, Utilities Alshor Plus and Minima used on Wheatstone LNG Project Australia & New Zealand Airports and Ports, Bridges, Commercial, Dams, Hi-Rise, Industrial, Medical Facilities, Mining 6

8 Components Plywood Panels 1.2m Plywood Panels 1.2m has 5 panel widths for this height, ranging from 0.3m to 0.9m. Minima Composite Panels 1.2m Minima Composite Panels 1.2m panels for greater durability. There are 5 panel sizes ranging from 0.3m to 0.9m. MMX21230 Plywood Panels 1.2m x 0.3m 19.5kg MMX21245 Plywood Panels 1.2m x 0.45m 24.8kg MMX21260 Plywood Panels 1.2m x 0.6m 29.6kg MMX21275 Plywood Panels 1.2m x 0.75m 34.5kg MMX21290 Plywood Panels 1.2m x 0.9m 42.5kg Minima Plywood Panels 1.5m Minima Plywood Panels 1.5m has 5 panel widths for this height, ranging from 0.3m to 0.9m wide. MMX71230 Minima Panel 1.2 x 0.3m 20.5kg MMX71245 Minima Panel 1.2 x 0.45m 26.2kg MMX71260 Minima Panel 1.2 x 0.6m 30.2kg MMX71275 Minima Panel 1.2 x 0.75m 36.9kg MMX71290 Minima Panel 1.2 x 0.9m 41.8kg Minima Composite Panels 1.5m Minima Composite Panels 1.5m for greater durability. There are 5 panel widths for this height, ranging from 0.3 to 0.9m wide. MMX21530 Plywood Panels 1.5m x 0.3m 24.6kg MMX21545 Plywood Panels 1.5m x 0.45m 30.3kg MMX21560 Plywood Panels 1.5m x 0.6m 35.9kg MMX21575 Plywood Panels 1.5m x 0.75m 41.7kg MMX21590 Plywood Panels 1.5m x 0.9m 47.4kg MMX71530 Minima Composite Panel 1.5 x 0.3m 25.1kg MMX71545 Minima Composite Panel 1.5 x 0.45m 31.0kg MMX71560 Minima Composite Panel 1.5 x 0.6m 36.8kg MMX71575 Minima Composite Panel 1.5 x 0.75m 42.8kg MMX71590 Minima Composite Panel 1.5 x 0.9m 51.8kg 7

9 Components Minima Plywood Panel 2.7m Minima Plywood Panel 2.7m has 6 panels widths for this height, ranging from 0.3m to 2.4m. The last panel is a huge 2.7 x 2.4m and weighs 283.7kg - it's a highly capable panel for large projects. Minima Composite Panels 2.7m Minima Composite Panels 2.7m have greater durability. There are 6 panel widths for this height ranging from 0.3m to 0.9m wide. MMX22730 Plywood Panel 2.7 x 0.3m 43.1kg MMX22745 Plywood Panel 2.7 x 0.45m 52.7kg MMX22760 Plywood Panel 2.7 x 0.6m 62.3kg MMX22775 Plywood Panel 2.7 x 0.75m 72.0kg MMX22790 Plywood Panel 2.7 x 0.9m 89.5kg MMX22724 Plywood Panel 2.7 x 2.4m 283.7kg Multi Purpose Plywood Panels Multi Purpose Plywood Panels have a continuous horizontal 5cm tie hole, used in wall offsets, corners with oblique angles and pilaster strips. Particularly suitable as formwork for concrete columns up to an edge-to-edge width of 55cm. MMX41270 Minima MP Panel 1.2 x 0.7m 37.0kg MMX41570 Minima MP Panel 1.5 x 0.7m 44.0kg MMX42770 Minima MP Panel 2.7 x 0.7m 70.8kg MMX72730 Minima Panel 2.7 x 0.3m 43.9kg MMX72745 Minima Panel 2.7 x 0.45m 53.9kg MMX72760 Minima Panel 2.7 x 0.6m 63.9kg MMX72765 Minima Panel 2.7 x 0.65m 67.2kg MMX72775 Minima Panel 2.7 x 0.75m 73.9kg MMX72790 Minima Panel 2.7 x 0.9m 89.5kg Minima Composite Multi Purpose Panel Alkus Composite used to face the panels, improving their durability. These panels have a continous horizontal 5cm tie hole, used in wall offsets, corners with oblique angles and pilaster strips. Particularly suitable as formwork for concrete columns up to an edge-to-edge width of 55cm. MMX61270 Minima Composite MP Panel 1.2 x 0.7m 37.8kg MMX61570 Minima Composite MP Panel 1.5 x 0.7m 45.0kg MMX62770 Minima Composite MP Panel 2.7 x 0.7m 72.6kg 8

10 Components Minima Clamp Adjustable Alignment Clamp Minima clamp is only used on vertical joints, it should be located over the panel rib. Adjustable Alignment Clamp permits length adjustment up to 15cm at maximum and connects panels with a tension-and compression-resistant, flush and aligned joint. MMX10028 Minima Clamp 3.4kg MMX10002 Minima Adjustable Alignment Clamp 5.18kg Minima Corner Clamp Minima Alignment Props Minima Corner Clamp makes an outer corner out of two standard panels. It can also be used on column formwork and permits 4 to 6cm length adjustments on outer corners. It is to be positioned over a panel rib. A minimum of two clamps should be used to connect the panels. MMX10001 Minima Corner Clamp 6.1kg Minima Alignment Props are used for stabilising and aligning the wallform. MMX10005 Minima Alignment Prop - Medium 22.9kg MMX10017 Minima Alignment Prop - Short 12.7kg MMX10032 Minima Propping Bracket 1.87kg 9

11 Components Minima Inner Corners Minima Hinged Corners Minima Inner Corners are at 90 degrees with the patented 2 degrees clearance of easing. After unlocking the corner stiffeners, the element becomes movable and can be effortlessly removed from the concrete. MMX31230 Minima Inner Corner 1.2m 41.4kg MMX31570 Minima Inner Corner 1.5m 51.0kg MMX32730 Minima Inner Corner 2.7m 87.2kg Minima Hinged Corners has three different heights and two different widths of hinge corners. Width 150mm hinge corner can be used as an outer corner for obtuse angles from degrees. Width 300mm hinge corner is suitable for angles from degrees. MMX51230 Minima Hinged Corner 1.2 x 0.3m 33.8kg MMX51515 Minima Hinged Corner 1.5 x 0.15m 27.8kg MMX51530 Minima Hinged Corner 1.5 x 0.3m 41.3kg MMX52715 Minima Hinged Corner 2.7 x 0.15m 49.2kg MMX52730 Minima Hinged Corner 2.7 x 0.3m 71.7kg Minima Access Bracket Minima Waler Plate Minima Access Bracket supports an access walkway and handrails. MMX10006 Minima Access Bracket 13.3kg BTA11012 Flat Bracket 130 x 130 x 12mm 1.5kg BTA11010 Flat Bracket 130 x 130 x 10mm 1.3kg BTA11008 Flat Bracket 130 x 130 x 8mm 0.8kg BTX10001 Bar Tie Wing Nut 15mm 0.3kg 10

12 Components Minima Edge Tie Bearing Minima Plates MMX10023 Minima Edge Tie Bearing 2.4kg MMX10018 Minima Plate 8/8 2.6kg MMX10030 Minima Plate Washer 0.51kg BNX x 75 x 6 x 12 dia plate washer 0.05kg MXX10012 Ground Plate 5 x kg MXX10043 Maxima Tie Plate kg Minima Accessories - Nuts and Bolts Minima Accessories - Nuts and Bolts, there are other sizes are also available. Minima Crane Hook Minima Crane Hook is for crane handling single Minima panels or preassembled Minima panels, the maximum loading is 500kgs. Two Hooks need to be used at all times. BTA10004 Bar Tie 15mm Cast Full Nut 0.21 MMX10010 Minima Waler Tie g MMX10012 Minima Tension Bolt kg MMA10015 Minima MP Bolt 0.59kg MMA10010 Minima MP Nut 0.46kg SSX10044 Superslim Connecting Pin 0.23kg MXX10021 Minima Crane Hook 8.2kg 11

13 Services Our service sets RMD Australia apart... With over 60 years of experience in the construction industry RMD Australia understand the many and varied challenges that our customers face, whatever the size of your project. Whilst our product range provides us with the capability of supporting your project, it is our people that will make the difference. Sales Support The Sales Team support you throughout the project, they have the knowledge to advise effective solutions based on RMD's safe and productive products to reduce costs. Engineered Drawings Engineering is based in each Region and at RMD's Head Office. They provide detailed drawings that clearly show the most efficient and safest way that the project should be undertaken. Customer Service RMD provide a wide range of customer services to suit your special requirements, from training to the support items that you may require. Technical Expertise Every project, large or small, requires a unique design. Our highly skilled team of Engineers will firstly gain a thorough understanding of your specific requirements, and then provide a solution designed to more than meet them in terms of speed and accuracy. With a view to cost effectiveness. Safety RMD Australia prides itself on the inherent safety of our product range and the solutions that we design. Safety is a major criteria for all of our personnel including our dedicated Sales Team. 12

14 Contacts RMD AUSTRALIA HEAD OFFICE PO Box 169, 66 Bennet Avenue, Melrose Park, SA 5039 Tel: +61 (08) Fax: +61 (08) CAIRNS PO Box 399, Ishmael Road, Earlville, QLD 4870 Tel: +61 (07) Fax: +61 (07) LAUNCESTON 9 Churchill Park Drive, Ivernay, TAS 7248 (PO Box 739, Launceston, TAS 7250) Tel: +61 (03) or +61 (03) Fax: +61 (03) rmd.launceston@rmdformwork.com MELBOURNE PO Box 3224, Unit 5/80 Camp Road, Broadmeadows, VIC 3047 Tel: +61 (03) Fax: +61 (03) rmd.melbourne@rmdformwork.com PERTH 6 Energy Street, Malaga, WA 6090 (PO Box 3203, Malaga DC, WA 6945) Tel: +61 (08) Fax: +61 (08) rmd.perth@rmdformwork.com TOWNSVILLE PO Box 7788, 11 Whitehouse Street, Garbutt, QLD 4814 Tel: +61 (07) Fax: +61 (07) rmd.townsville@rmdformwork.com ADELAIDE PO Box 169, 66 Bennet Avenue, Melrose Park, SA 5039 Tel: +61 (08) Fax: +61 (08) rmd.adelaide@rmdformwork.com DARWIN 3/32 Bishop Street, Stuart Park, NT 0820 (PO Box Winnellie, NT 0821) Tel: +61 (08) Fax: +61 (08) rmd.darwin@rmdformwork.com MACKAY Block 8D, Graeme Heggie Street, Mackay, QLD 4740 Tel: +61 (07) / +61 (07) Fax: +61 (07) rmd.mackay@rmdformwork.com NAVAL BASE 43 Dooley Street, Naval Base, WA 6165 (PO Box 386, Kwinana, WA 6167) Tel: +61 (08) Fax: +61 (08) rmd.navalbase@rmdformwork.com ROCKHAMPTON Corner McLaughlin and Wade Street, North Rockhampton, QLD 4702 (PO Box 5922, Central Queensland MC, QLD 4701) Tel: +61 (07) Fax: +61 (07) rmd.rockhampton@rmdformwork.com BRISBANE 163 Crockford Street, Northgate, QLD 4013 (PO Box 55, Nundah, QLD 4012) Tel: +61 (07) Fax: +61 (07) rmd.brisbane@rmdformwork.com HOBART 5 Lampton Avenue, Derwent Park, TAS 7009 (PO Box 246, Moonah, TAS 7009) Tel: +61 (03) or +61 (03) Fax: +61 (03) rmd.hobart@rmdformwork.com MAROOCHYDORE 32 Page Street, Kunda, QLD 4556 (PO Box 584, Maroochydore, QLD 4558) Tel: +61 (07) Fax: +61 (07) rmd.maroochydore@rmdformwork.com NEWCASTLE 3 Riverside Drive, Mayfield West, NSW 2304 (PO Box 53, Wickham, NSW 2293) Tel: +61 (02) Fax: +61 (02) rmd.newcastle@rmdformwork.com SYDNEY Chadderton Street, Canley Vale, NSW 2166 (PO Box 3007, Lansvale, NSW 2166) Tel: +61 (02) Fax: +61 (02) rmd.sydney@rmdformwork.com Our policy is one of continuous improvement and we reserve the right to change, alter or modify any detail, design, capacity, weight, dimension or code without prior notice being given. The arrangements of equipment shown in photographs may have been assembled by others and therefore not reflect current best working practices or legislation requirements. An Interserve Company