Price Bid Cum Bill of Quantity (Revised)

Transcription

1 ANNEXURE-I CONSTRUCTION OF FLOORING (Tile, marble, granite etc.) AND SANITARY AND PLUMBING WORKS IN DESIGN, CSE, PHYSICS, CHEMICAL, HSS AND MATHEMATICS DEPARTMENT BUILDINGS FOR THE PROJECT EXTENSION OF ACADEMIC COMPLEX PHASE (V): AT IIT-GUWAHATI CAMPUS, GUWAHATI NIT No: NERO/MMD/735/218 dated: A ) i) ii) iii) iv) v) FLOORING 100 mm thick cement concrete in floors in proportion 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm minal size) over flat brick soling with brick of designation 75 (to be measured and paid separately)including curing etc. complete as directed. 40mm thick cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm minal size) finished with floating coat of neat cement slurry. Extra over item.2 for finishing with NITOFLOR HARDTOP/equivalent of approved shade as per manufacturers specifications in place of floating coat of neat cement cement slurry complete as per drawing and as directed by the Engineer-in -charge Providing and laying in floor Group -V matt finished ceramic tile of minimum thickness 7.8mm without warpage of approved design and manufacturer laid on 20mm thick cement mortar 1:3(1cement:3 sand) including filling the joints with pigmented tile joint filler Nitotile-GR or equivalent of matching shade and approved manufacturer as per manufacturers specification etc. and cleaning the surface with detergent and water complete. Size 400 mm x 400mm ( Land Crema plus/or Land Brown as per page 25 of Somany Catalogue or equivalent) Providing and laying in floor heavy duty vitrified antiskid matt finish tiles in corridors and ramp as per IS:4457 of minimum thickness 10mm without warpage of approved design and manufacturer laid on 20mm thick cement mortar 1:3(1cement:4 sand) including filling the joints with pigmented tile joint filler Nitotile-GR or equivalent of matching shade and approved manufacturer as per manufacturers specification etc. and cleaning the surface with detergent and water complete. Size : 300mm x 300mm.(Beige plus/or Rosa Grandura as per page 25 of AGL Catalogue or equivalent for corridor/passage and Bullet Beige plus/or Bullet Rosa as per Page 25 of AGL Catalogue or equivalent for ramp) Price Bid Cum Bill of Quantity (Revised) cum sqm sqm sqm sqm Providing and laying polished vitrified tiles in floors and skirting in different sizes with water absorption's less than 0.08% and conforming to IS: of vi) approved make in all colours and shades,laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including grouting the joints with approved tile jointing compound of matching colour etc.complete. Size 600 mm x 600 mm (Sea Sand plus/or Grey Granito as per page 23 of AGL or equivalent) Sqm AMOUNT 1 of 6

2 vii) viii) ix) Providing and fixing markana Chak doongri marble stone of average thickness 18mm to 20mm over 20 mm thick base mortar of proportion 1:4 (1 cement : 4 coarse sand) laid and jointed with tiles jointing compound of matching shade including half round moulding of the se, rubbing and polishing complete in all respects including cutting the stone to make utch/offset on all corners vertical and horizontal and moulding as per utch detail in drawing and directed in window sills Extra over item. 7 for mirror polishing of marble stone surfaces. Providing and fixing 2 mm thick homogeneous Polyvinyl chloride sheet/ tile in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality and manufacturer like Dunlop S-758, Fevicol SR 998 or equivalent including rolling with light wooden roller of proper weight about all complete as directed by Engineer-in-Charge, in approved colour and shade. sqm sqm sqm AMOUNT x) xi) xii) B ) i) ii) Providing and laying V.C shield Tiles of SOMANY Tiles of 1st quality conforming to IS: of approved make in colours, shades, laid on 20mm thick cement mortar 1:3(1 cement : 3 coarse sand) including pointing the joints with tile jointing compounds of approved manufacturwer and matching shades etc. all complete (size 600mm X 600 mm or more) Providing and fixing 18mm thick marble strips (any colour) of150mm width in floor panels in desired patterns over 20mm (average) thick base of 1:3 cement mortar laid and jointed with white cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete to gralithic finish Extra for providing opening of required size & shape for wash basins, kitchen sink in kitchen platform, vanity counters and similar locations in mable/ granite/stone work including necessary holes for pillar tapes etc. including rubbing and polishing of cut edges etc. complete. DADO, SKIRTING, STEPS & RISERS Providing and laying in steps, landings and risers heavy duty, vitrified, antiskid and matt finish tiles as per IS:4457 of minimum thickness 10mm without warpage of approved design and manufacturer laid on 20mm thick cement mortar 1:3(1cement:3 sand) including filling the joints with pigmented tile joint filler Nitotile-GR or equivalent of matching shade and approved manufacturer as per manufacturers specification etc. and cleaning the surface with detergent and water complete Size: 300 mm x 300mm Providing and fixing ceramic tiles of approved design & shade and of minimum thickness 5.6mm thick in dado/skirting in any pattern and size over 12mm thick cement mortar 1:3(1cement : 3 coarse sand ) and filling the joints with Nitotile-GR or equivalent of matching shade as per manufacturers specification etc and cleaning the surface with detergent and water complete. Size-300mm x 450 mm ( Sadel Light plus/or Sandal Dark as per page 28 of AGL Catalogue and Durban Marfil as per page 75 of Kajaria Catalogue or equivalent) sqm m each sqm sqm of 6

3 iii) iv) v) Providing and fixing 18mm thick polished granite stone of approved shades in wash basin counter / urinal partitions, steps, landing, raisers and any other places including cutting holes etc. complete over 20mm cement mortar 1:3 (1 cement : 3 coarse sand) Extra for sing of the stone edges as per detail and polishing the same to give mirror finish as directed by Engineer in Charge. sqm Rm Providing and fixing in position 40mm thick Thermocol in expansion joint sqm AMOUNT vi) vii) viii) C ) i) Providing and applying polysulphide sealing compound of approved manufacturer to seal the expansion joint-gaps in size of 40mmx20mm including preparing of the joints before application as Providing and fixing sheet covering over expansion joints with iron screws as per design to match colour/shade of wall treatment -Aluminium strips 200mm wide 3.15mm thick. Providing and fixing 4mm thick 40mm outer dia G.I. pipe for spout including cutting holes in walls and making good the same.:600 mm long SANITARY FITTINGS Providing and fixing water closet squatting pan (Indian Type W.C. Pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm. with integral type foot rests. m m each each 9.00 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. Flushing cistern with manually controlled device (handle lever), conforming to ii) IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid. Providing and fixing white vitreous china flat back type lipped front SENSOR operated urinal basin of iii) approved size. (Sample to be approved by the engineer in charge) iv) Providing and fixing toilet paper holder : each a) C.P. Brass Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws v) with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing t less than 190gms. Providing, fitting and fixing recessed soap tray of vi) Hindware make complete as specified and directed, Coloured. Size 216mm x 108mm. vii) Providing and fixing square-mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300mm size (inside) the weight of cover to be t less than 4.50 kg and frame to be t less than 2.70 kg as per standard design: 100x100mm size P type. With F.P.S. Bricks class designation of 6

4 Providing vitreous china counter-top wash basin of size 490mm dia of Hindware make with 32mm CP brass viii) waste coupling of standard pattern, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the wall and slabs wherever required. a) Coloured vitreous china counter-top wash basin of size 490mm dia each Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with ix) 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each x) Supplying and fitting fixing C.P. pillar cock of 15mm dia of 5011 of Jaquar brand as specified and directed. each Providing and fixing 600x120x5 mm glass shelf with edges rounded off supported on adised aluminium xi) angle frame with C.P. brass brackets and guard rail each complete fixed with 40mm long screws, rawl plugs etc. complete. xii) Providing fitting and fixing C.P. Grating to the floors complete as directed and specified. a) 100mm dia each xiii) Providing and fixing 3 layer PP-R (Polypropylene Random Copolymer) pipes SDR-7.4 UV stabilised and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R specials and fittings like bends, tees, elbows, sockets etc. including testing of the joints as per direction o Engineer-In-Charge. a) 65mm Rm b) 40mm minal bore Rm Providing and fixing on wall face or anyother places unplasticised - Rigid PVC pipes conforming to IS:13592 Type-B including jointing with solvent cement and seal xiv) ring conforming to IS:5382 leaving 10mm gap for thermal expansion single socketed pipes with all accessories as bend, door bend, horn bend etc., complete as directed. a) 110mm dia m b) 150mm dia m xv) Providing and fixing medium duty G.I. pipes complete with G.I. fittings and clamps,unions etc. including cutting and threading cutting chase in the walls and making good the walls / floors etc.(internal work) rate shall be inclusive of two coats of anti corrosive bituminustic paint of approved quality, G.I. pipes of approved manufacturers and all G.I. fittings. a) 15mm minal bore m b) 20mm minal bore m Providing and fixing medium duty G.I. pipes complete with all G.I. fittings specials, clamps,unions etc. including cutting and threading effecting proper xvi) connection in walls,floors making good the same trenching and refiling complete as directed by the Engineer-in -charge rate shall be inclusive of two coats of anti corrosive bituminustic paint of approved quality on G.I. pipes and fittings (External work) a) 40mm minal bore m b) 65mm minal bore m c) 100 mm minal bore m AMOUNT 4 of 6

5 xvii) xviii) xix) xx) Making connection of G.I. distribution branch with G.I. main 50 mm to 80 mm minal bore by providing and fixing tee, including cutting and threading the pipe etc. Providing and fixing Jaquar made C.P. Bibcock of approved quality having 15mm minal bore complete Providing and fixing jaquar made C.P. angular stop cock of 15mm minal bore complete with flange and C.P. copper connection Providing and fixing of BIS marked Zoloto brass full way valve with C.I. wheel. each each each AMOUNT a 25mm minal bore each b 32mm minal bore each 9.00 c d e xxi) xxii) xxiii) xxiv) xxv) a 40 mm minal bore 65 mm minal bore 80mm minal bore Providing and fixing UPVC floor trap with 100mm inlet and 100 mm outlet with circular PVC hinged grating with frame. Providing and fixing low density polythelene (Sintex type) single piece Water Storage tanks with cover,inlet, outlet scour and required float valve. Overflow and vent connection shall be provided with mosquito proof wire mesh coupling. Providing and fixing white vitreous china laboratory sink with C.I. Brackets 40mm dia C.P. brass waste pipe required length including cutting and making good the wall wherever required and painting of C.I. brackets size 500 x 450 x 200 Providing and fixing three way CP laboratory sink cock as per approved sample, complete in all respect. Supplying, fitting and fixing PVC pipes of 6kgf/cm2 (Supreme / prince) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels including below G.L as directed and specified. In exposed surfaces or in trenches. each each 6.00 each 4.00 each ltr each each i) 160mm dia Rm ii) 110mm dia Rm xxvi) Concealed by chiseling or breaking brick wall / R.C.C and making good to the damage. a) 110mm dia Rm b) 75mm dia Rm Supplying, fitting and fixing PVC reducer of (Supreme / Prince) or other ISI approved including joining, fitting xxvi) and fixing etc. as necessary complete at all levels including below G.L as directed and specified. a In exposed surfaces or in trenches. b 160mm x 110mm each 2.00 Concealed by chiseling or breaking brick wall / R.C.C and making good to the damage. 110mm dia x 75mm each of 6

6 Supplying, fitting and fixing 87.5 degree PVC bend with door of (Supreme / prince) or other ISI approved xxvii) including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. i ii a b In exposed surfaces or in trenches. 160mm dia 110mm dia Concealed by chiseling or breaking brick wall / R.C.C and making good to the damage. each 5.00 AMOUNT i 110mm dia each ii 75mm dia each xxviii ) Providing, fitting and fixing 110mm dia PVC cowel with ISI make complete as directed and specified. each 4.00 GRAND TOTAL (in Figure) GRAND TOTAL (in Words)) 6 of 6