AustraliteTM. Lightweight, Loadbearing and Fire Rate Block System. masonry. build in style

Transcription

1 AustraliteTM Lightweight, Loadbearing and Fire Rate Block System masonry. build in style

2 Blockwork Product Guide TM Australite Smooth Faced Blocks All available in Standard Grey (Note colour variations may occur between part sizes and full length blocks) 100mm Series {ƒ uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified Three Quarters Half Quarter Lintel or Bond Beam 9.5 kg 6.1 kg 4.3 kg 2.7 kg 9.0 kg 180 per pallet 240 per pallet 360 per pallet 432 per pallet 180 per pallet mm Series 2 hour insulation FRL Half High Solid Solid 5.2 kg 12.4 kg 288 per pallet 144 per pallet 10MPa kg 150 per pallet 15MPa FL 7.5 kg 150 per pallet 4MPa 150mm Series {ƒ uc = 15MPa unless noted) 2 hour insulation FRL on standard grey blocks unless otherwise specified Three Quarters Half Corner Open End Lintel or Bond Beam 10 kg 7.7 kg 5.2 kg 9.0 kg 9.6 kg 12.4 kg 144 per pallet 160 per pallet 252 per pallet 135 per pallet 144 per pallet 120 per pallet 2hour when filled 2hour when filled * Acousticell (15AC) Half High Solid Recessed Web Stretcher H Block 4 hour insulation FRL 8.6 kg 9.8 kg 9.4 kg 9.8kg 15.5 kg (Made to Order) 192 per pallet 144 per pallet 144 per pallet 144per pallet 120 per pallet 10.8kg 2hour when filled 2hour filled 10MPa 120 per pallet *Note: 1 pallet contains 144 blocks = 108 off and 36 off Product code:

3 TM Australite Smooth Faced Blocks All available in Standard Grey (Note colour variations may occur between part sizes and full length blocks) 200mm Series {ƒ uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified Three Quarters Half Quarter Lintel 11.6 kg 8.7 kg 6.8 kg 4.3 kg 16.4 kg 108 per pallet 120 per pallet 180 per pallet 360 per pallet per pallet Half High Capping 4 hour insulation FRL 5.9 kg 5.3 kg 13 kg 216 per pallet 160 per pallet per pallet 10M mm Series Retaining Wall Units {ƒ uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified * Recessed Web Stretcher H Block Half End Corner & End (Sold Separately) 11.4 kg 11.2 kg 10.5kg 7.3 kg 11.4 kg Clean Out 108 per pallet 108 per pallet 108 per pallet 180 per pallet 108 per pallet 11.4 kg 4hour filled 4hour filled 4hour filled 108 & 432 per pallet *Note: 1 pallet contains 108 blocks = off and 18 off Product code: Optional 300mm Series Retaining Wall Units {ƒ uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified Stretcher H Block Half End End (Sold Separately) Open end 13.6 kg 14kg 8.7 kg 16.8 kg Clean Out 11.4 kg 72 per pallet 72per pallet 120 per pallet 60 per pallet 15.7 kg 108 per pallet 4hour filled 4hour filled 108 and 360 per pallet

4 TM Architec Designer Masonry Colours, Alabaster, Almond, Charcoal and Pearl Grey Split Face {ƒ uc = 15MPa) Coloured smooth and split face blocks sold in full pallets only. Colours, Alabaster, Almond, Charcoal and Pearl Grey Smooth, Shot-Blast, Honed and Polished {ƒ uc = 15MPa) * Half High 13.9 kg (Made to order) 144 per pallet 7.2 kg 1 core is deleted 288 per pallet from 1 in 3 blocks for splitting corners * * Recessed Web (Made to order) (Made to order) 16.6 kg 15.5 kg 120 per pallet 120 per pallet 1 core is deleted from 1 in 4 blocks for splitting corners Recessed Web 17.7 kg 17.0 kg per pallet per pallet * 15.42* Made to order Made to order 11.1 kg Recessed Web 180 per pallet 15.0 kg 15.0 kg 120 per pallet 120 per pallet Note: Smoothface Recessed Web and kg 14.2 kg are sold on 1 pallet per pallet per pallet (1 pallet = blocks made up of 75 x and 15 x 20.01) 40 Product code Capping All these products are available in Honed, Shot-Blast or Polished finish. For corner applications, these products are available with the face and one end Honed. Shot-Blasted or Polished. Lead times apply. Concrete Commons Fire Light (FL) 120 minute insulation FRL, ƒ uc 4MPa FL 4.5 kg 24.2 per m per pallet Made to order 230 Made to order Size (mm) 230 x x 76 2 x x x x 162 Code Common 162LSG SG Weight (kg) Units per square Durability EXP EXP EXP Characteristic unconfined compressive strength ƒ uc 12MPa 10MPa 12MPa # per pallet FRL // // // Rendered 10mm both fares 120/120/ /120/ /120/120

5 Austral Masonry Australite TM Range Retaining Wall Details and Clean-out Course and Starter Bar Spacing 100 Starter bar spacing to engineers details (usually 400mm) Clean-out Course and Starter Bar Spacing 100 Starter bar spacing to engineers details (usually 400mm) may be added for extra support to next course required to make up wall width Core Spaces at Ends and Corners for 20.91/30.91 systems 100mm 300mm* Core holes are spaced at 200mm centres 300mm Clean-out Course for Corner must be added to make up wall thickness 200mm Cleanout course for Steel bars may be added for extra stability Corner Details 200mm Clean-out Course for mm 200mm blocks maintain bond without special blocks other than Approximate Material Quantities for 1m 3 of Mortar There are 12.5 full blocks per square metre of wall surface area. Approximately 1m 3 of mortar mix (allowing for wastage) is required for every 800 to 1200 blocks. Core Fill Quantities Block Type No. Blocks Filled per m 3 of concrete grout M3 M4 Grey Block Grey Block Mix in 1:1:6 proportions Mix in 1:5 proportions Cement: 7 bags (40kg each) Cement: 8 bags (40kg each) Lime: 5 bags (40kg each) Methyl cellulose (to suppliers instruction) 8 litres Sand: 1.7 tonnes Sand: 1.7 tonnes Mix in 1:0.5:4.5 proportions Mix in 1:4 proportions Cement: 9 bags (40kg each) Cement: 10 bags (40kg each) Lime: 3 bags (40kg each) Methyl cellulose (to suppliers instruction) 10 litres Sand: 1.7 tonnes Sand: 1.7 tonnes

6 1300 MASONRY ( ) Austral Masonry National Offices New South Wales 44 Clunies Ross Street Prospect NSW 2148 PO Box 6137 Seven Hills BC NSW 2147 Tel Fax sales@australmasonry.com.au ordersnsw@australmasonry.com.au Queensland 184 Burnside Road Ormeau QLD 4208 PO Box 502 Beenleigh QLD 4207 Tel Fax sales@australmasonry.com.au 1. Stock colours and textures Blocks are available in Smooth or Split Face finishes in nominal or 1mm thicknesses. All series coloured blocks are made to order and a surcharge may apply. Part sizes are cut on site. A surcharge applies to orders less than the set minimum quantity. 2. Textures Finishes including Honing, Polishing and Shot-blasted are produced on a made to order basis. Lead times apply as the product must be cured for four weeks to harden sufficiently before processing. Contact your nearest Austral Masonary office for approximate lead times and premiums on special textured finishes. 3. Colour and texture variation The supply of raw materials can vary over time. In addition, variation can occur between product types and production batches. 4. We reserve the right to change the details in this publication without notice. 5. For a full set of Terms and Conditions of Sale please contact your nearest Austral Masonry sales office. Victoria 59 Elliott Road Dandenong VIC 3175 PO Box 4068 Dandenong South VIC 3164 Tel Fax sales@australmasonry.com.au A division of The product images in our brochures give a general indication of colour for your preliminary selection. We recommend you also view current product samples before making your final selection. Printed July AM5759 BROWNINK