ARGENTA PLUS (FSC) IP55-IP65 steel floorstanding. cabinets. SEMI-COMPACT (FSC) Technical Specifications

Transcription

1 ARGENTA PLUS (FSC) steel floorstanding semi-compact cabinets The Floor-Standing Cabinets of the ARGENTA PLUS series are a set of industrial steel enclosures designed to contain any type of electrical device and equipment necessary for the supply, distribution and conversion of electricity, and are suitable for control and automation equipment for industrial plants and machine tools. This range of cabinets has been designed for maximum versatility so that the installer can create their own arrangements depending on their needs. It is highly functional thanks to the different possibilities for joining cabinets together, the possibility of installing any type of electrical device and the comprehensive range of accessories available for this series. Intended for the most professional sector, the range is available in three versions: combinable, semicompact and compact. SEMI-COMPACT (FSC) Technical Specifications - Degree of protection: Single-door cabinets: 65 / NEMA 1, 12, 4. Double-door cabinets: 55 / NEMA 1, Resistance to impact: Body and opaque doors: IK10. Transparent doors: IK09. - Ambient temperature range: - C / +40 C. - Maximum temperature for sealing gasket: 80 C Floor-standing cabinets Certifications Compliant with the Low Voltage Directive 2014/35/EU. Standards: UNE-EN and UNE-EN (as applicable). UL508A and Gost-R certificates (for ENL and FSC cabinets).

2 argenta plus SEMI-compact (FSC) Product series (Rolled steel) --Opaque and transparent door cabinets without mounting plate. --Single door up to width of 1000 mm. --Double door as of width of 1000 mm. --Height: mm. --Width: mm. --Depth: mm. Supply Supplied on pallets, protected with honeycomb cardboard corner pieces and shrink-wrap film. The plate can be supplied assembled on request. --2 lifting eyebolts fitted. --Key. --Assembly instructions. * Plinth supplied as accessory. Professional solutions for projects in engineering, robotics, automation, etc. Material - Cold-rolled steel EN A1. - Injected polyurethane sealing gasket. Finish --Coated with hardened RAL 7035 embossed polyester paint, μ, with UV protection. Protection Standard painting cycle --Degreasing: Removal of remains of contaminants by means of a neutral stripper and tensoactive concentrate. --Rinsing: Two rinses, the first one with mains water and the second one with demineralised water. --Passivation: Thin-coat conversion agent. --Drying: With hot air (in a tunnel at 100 C). --Painting: Coated with hardened RAL 7035 polyester paint, thickness between microns. --Firing: Furnace polymerisation adherence at 180 C for min. --Corrosion resistance according to the UNE-EN standard. For outdoor installations, the effect of the corrosion must be taken into consideration. 2 argenta plus series

3 55 65 Body Single and symmetrical body comprised of: --Closed sides made of 1.5-mm thick sheet. --Exterior profiles with a tubular structure that affords the unit great solidity. --Metal parts welded internally to the cabinet structure to guarantee maximum rigidity and yield strength. --Covered with 14x9 square cut-outs for caged nuts and round cut-outs with a diameter of 4.65 for machined screws. Distance between cut-outs is mm. Rear panels --Made from sheet with a thickness of 1.5 mm. --Sealing gasket to guarantee 55/65 protection. --M6 countersunk screws for attachment. --Reversible and replaceable with a door (as accessory). Top cover --Made from sheet with a thickness of 1.5 mm. --Sealing gasket to guarantee 55/65 protection. --M12 bolts for placement. --Supplied with two lifting eyebolts fitted. --Includes M8 bolts for earthing. Cable entry --Cable entry covers with adjustable opening, manufactured in galvanised steel with a thickness of 1.2 mm. --Covers of 100 mm and 200 mm depending on cabinet depth. --Brush protection gasket (as accessory). Insulation kit Door --Possibility of opaque or transparent door with 120 reversible opening. --2-mm thick opaque door. --4-mm thick tempered transparent glass door. --Four hidden and detachable hinges made of reinforced zamak. --Double door as of width of 1000 mm: Opaque door 1000 mm: PO500+PO500. Opaque door 1200 mm: PO600+PO600. Transparent door 1000 mm: PT600+PO400. Transparent door 1200 mm: PT800+PO Sealing gasket to guarantee the protection. --Reinforcement profiles with cut-out holes with separation of mm for fitting accessories. --Possibility of fitting an inside door in cabinets up to a width of 1000 mm (as accessory). Locks --Single door: 4-point lock, double-bit insert with retractable handle in RAL 7016 grey. --Double door: Double lock; Interior: 2-point ¼ turn. Exterior: double-bit insert with retractable handle in RAL 7016 grey. --Other types of locks supplied as accessories. Mounting plate --Made from galvanised sheet steel with a thickness of 3 mm, reinforced with C-shaped folds. --It includes the 4 depth-adjustable supports for fitting. --Plates supplied as accessory. - - The insulation kit should be ordered to achieve 65 protection. 3

4 argenta plus SEMI-compact (FSC) Single-door cabinets without mounting plate. Rolled steel. 65* semi-compact Reference No. Double-door cabinets without mounting plate. Rolled steel. 55 semi-compact Reference No. Dimensions Dimensions Door Door Cable entry Cable entry Glass door with transp. panel Glass door with transp. panel Weight Power dissipation according to temperature increase C P(W)** (AxBxC) OPAQUETRANS. Width x Depth Height x width PO PT FSC PO/DC 1650x1000x400 PO PT 770x x FSC PO/DC 1650x1000x500 PO PT 770x x FSC PO/DC 1650x1200x400 PO PT 970x x FSC PO/DC 1800x1000x400 PO PT 770x x FSC PO/DC 1800x1000x500 PO PT 770x x FSC PO/DC 1800x1200x400 PO PT 970x x FSC PO/DC 1800x1200x500 PO PT 970x x FSC PO/DC 1800x1600x400 PO x FSC PO/DC 1800x1600x500 PO x FSC PO/DC 2000x1000x400 PO PT 770x x FSC PO/DC 2000x1000x500 PO PT 770x x FSC PO/DC 2000x1200x400 PO PT 970x x FSC PO/DC 2000x1200x500 PO PT 970x x FSC PO/DC 2000x1600x400 PO x FSC PO/DC 2000x1600x500 PO x Weight Power dissipation according to temperature increase C P(W)** (AxBxC) OPAQUETRANS. Width x Depth Height x width PO PT FSC PO/SP 1650x600x400 PO PT 370x x FSC PO/SP 1650x800x400 PO PT 570x x FSC PO/SP 1650x800x500 PO PT 570x x FSC PO/SP 1650x1000x400 PO - 770x FSC PO/SP 1650x1000x500 PO - 770x FSC PO/SP 1800x600x400 PO PT 370x x FSC PO/SP 1800x800x400 PO PT 570x x FSC PO/SP 1800x800x500 PO PT 570x x FSC PO/SP 1800x1000x400 PO - 770x FSC PO/SP 1800x1000x500 PO - 770x FSC PO/SP 2000x600x400 PO PT 370x x FSC PO/SP 2000x800x400 PO PT 570x x FSC PO/SP 2000x800x500 PO PT 570x x FSC PO/SP 2000x1000x400 PO - 770x FSC PO/SP 2000x1000x500 PO - 770x Single-door cabinets: 65 / NEMA 1, 12, 4. Double-door cabinets: 55 / NEMA 1, 12. RAL 7035 rolled steel. Eyebolts and cable entry lids included. Supplied without mounting plate. For cabinets with transparent door replace PO with PT. E.g: FSC PT/SP. Asymmetrical transparent double doors: Cabinets with a width of 1000: PT600 + PO400 / Cabinets with a width of 1200: PT800 + PO400. For special cabinets, check availability of UL certificate. * The insulation kit should be ordered to achieve 65 protection. ** Calculations obtained according to the CEI 890:1997 standard + Corrigendum 1998; "Method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and control gear". Insulation kit Reference No. Description Insulation kit Needed to achieve 65 protection in FSC-type semi-compact cabinets. 4 argenta plus series

5 B B-90 A-220 A Maximum acceptable loads Maximum load declared according to the number of lifting eyebolts and the angle of the chain: β 4 EYEBOLTS 2 EYEBOLTS β 90º 90º < β 120º β 90º 90º < β 120º 10 Kg 720 Kg 6 Kg 360 Kg It is not recommended to lift the cabinet when the angle between chains is greater than 120. The weight must be evenly distributed. Dimensions: Argenta Plus semi-compact Single door Front Side section Mounting plate C+12 B-100 B-159 A-90 ø3.75 A-90 A-66 A-128 B-1* B-145* Ground plan Ground plan section Profile 20 B-230 M12 B B-66 B-90 Ø x9 B-69 * For B=600, change to B-150 B-170 5

6 argenta plus SEMI-compact (FSC) opaque door cabinet opaque double door cabinet transparent door cabinet transparent double door cabinet Dimensions: Argenta Plus semi-compact Double door Front Side section Mounting plate B C+12 B-100 B-90 B-159 B/2 B/2-10 A-90 A-66 A-128 B/2-170 B/2-150 A-220 A Ø Ground plan Ground plan section Profile M12 45 B/ B/2-230 B-230 B-69 Ø x9 Head Office. Leonardo da Vinci. Pol. Ind. Los Huertos Zuera - Zaragoza (Spain) Telephone: ide@ide.es