solarspan Leaders in Thermal & Architectural Building Solutions Technical Drawings

Transcription

1 Leaders in Thermal & Architectural Building Solutions Technical Drawings v2 - Current 20/08/2018

2 Contents Panel Detail - SOL13-PR Barge Capping Detail - SOL13-BC Barge/Parapet Detail - SOL13-BC Head Flashing Detail - SOL13-HF Ridge Detail - SOL13-RD Insulated Box Gutter Detail - SOL13-RD Roof Expansion Joint - SOL13-RJ Insulated Valley Box Gutter - SOL13-RV Eaves Gutter Detail 1 - SOL13-WC Eaves Gutter Detail 2 - SOL13-WC SolarSpan - Technical Drawings v2 - Current 20/08/2018

3 Panel Detail - SOL13-PR01-1 We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. SolarSpan - Technical Drawings v1 - Current 20/08/2018 3

4 Barge Capping Detail - SOL13-BC01-1 INSULATED SOLARSPAN ROOF 14g TEK SCREWS TO EVERY RIB. ADDITIONAL FIXINGS MAY BE REQUIRED, REFER ENGINEER FOR ASSESSMENT. COLORBOND CAPPING FIXED TO WALL PANEL 4mm ALUMINIUM (TYP) ANGLE BRACKET TO FIX WALL PANEL PURLINS CLEAT & STRUCTURAL STEEL We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. 4 SolarSpan - Technical Drawings v2 - Current 20/08/2018

5 Barge/Parapet Detail - SOL13-BC02-1 This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their recall and may not be reproduced or its contents divulged without written authority. 4mm ALUMINIUM (TYP) 4mm ALUMINIUM (TYP) 14g TEK SCREWS TO EVERY RIB. ADDITIONAL FIXINGS MAY BE REQUIRED, REFER TO ENGINEER FOR ASSESSMENT. 4mm ALUMINIUM (TYP) We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited Title trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. SolarSpan - Technical Drawings v1 - Current 20/08/2018 Metecno Pty Limited trading as Bondor Description SOLARSPAN - ROOFING BARGE / PARAPET DETAIL NOTE: PANEL BY BONDOR, SCREW MAY BE BY BONDOR, ALL OTHER ITEMS BY OTHERS. Date Rev NTS Description Drawing no. Init Issue 5

6 Head Flashing Detail - SOL13-HF01-2 TURN UP ROOF PANS TO FULL RIB HEIGHT (SPECIAL TOOL AVAILABLE) PROFILED FILLER SEALED TOP AND BOTTOM IF REQUIRED 4mm ALUMINIUM (TYP) 14g TEK SCREWS TO EVERY RIB. ADDITIONAL FIXINGS MAY BE REQUIRED, REFER ENGINEER FOR ASSESSMENT. 2 MINIMUM PITCH. FOAM SEAL IF REQUIRED ROOF HEAD FLASHING PROFILED FILLER SEALED TOP AND BOTTOM IF REQUIRED 4mm ALUMINIUM (TYP) We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. 6 SolarSpan - Technical Drawings v2 - Current 20/08/2018

7 Ridge Detail - SOL13-RD g TEK SCREWS TO EVERY RIB. ADDITIONAL FIXINGS MAY BE REQUIRED, REFER ENGINEER FOR ASSESSMENT TURN UP PANS TO FULL RIB HEIGHT COLORBOND RIDGE CAPPING CYCLONE WASHER (OPTION FOR CYCLONIC REGIONS) 2 MINIMUM PITCH. ROOF SUPPORT STRUCTURE. MINERAL WOOL OR FIBRE INFILL COLORBOND COVER FLASHING SOLARSPAN ROOF We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. SolarSpan - Technical Drawings v1 - Current 20/08/2018 7

8 Insulated Box Gutter Detail - SOL13-RD g TEK SCREWS TO EVERY RIB. ADDITIONAL FIXINGS MAY BE REQUIRED, REFER ENGINEER FOR ASSESSMENT INSULATED SOLARSPAN ROOF ROOF PANEL "CUT BACKS" CARRIED OUT ON SITE. COLORBOND "Z" FLASHING 2 MINIMUM PITCH. CONCRETE PARAPET WALL PARAPET AND COVER FLASHINGS OVERFLOW SPITTERS / SPIGOT 6x4mm BUTYL RUBBER ROOF SUPPORT STRUCTURE 50mm INSULATED PANEL BOX GUTTER (INDEPENDENTLY SUPPORTED) We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. 8 SolarSpan - Technical Drawings v2 - Current 20/08/2018

9 Roof Expansion Joint - SOL13-RJ01-3 COLORBOND FLASHING TURN DOWN PAN APPROX 20 (SPECIAL TOOL AVAILABLE) 14g TEK SCREWS TO EVERY RIB. ADDITIONAL FIXINGS MAY BE REQUIRED, REFER ENGINEER FOR ASSESSMENT TURN UP PAN TO FULL RIB HEIGHT (SPECIAL TOOL AVAILABLE) 2 MINIMUM PITCH. INSULATED SOLARSPAN ROOF ROOF SUPPORT STRUCTURE MINERAL WOOL INFILL (IF REQUIRED) 14g TEK SCREWS TO EVERY RIB. ADDITIONAL FIXINGS MAY BE REQUIRED, REFER ENGINEER FOR ASSESSMENT 4mm ALUMINIUM (TYP) COLORBOND TRIM FLASHING (IF REQUIRED) We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. SolarSpan - Technical Drawings v1 - Current 20/08/2018 9

10 Insulated Valley Box Gutter - SOL13-RV g TEK SCREWS TO EVERY RIB. ADDITIONAL FIXINGS MAY BE REQUIRED, REFER ENGINEER FOR ASSESSMENT 2 MINIMUM PITCH. TURN DOWN PAN APPROX 20 (SPECIAL TOOL AVAILABLE) 2 MINIMUM PITCH. SILICONE SEALANT EACH SIDE BOX GUTTER DIMENSIONS AS REQUIRED ROOF SUPPORT STRUCTURE BOX GUTTER SUPPORT We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. 10 SolarSpan - Technical Drawings v2 - Current 20/08/2018

11 Eaves Gutter Detail 1 - SOL13-WC03-2 TURN DOWN PAN APPROX 20 (SPECIAL TOOL AVAILABLE) EAVES GUTTER SOLARSPAN INSULATED ROOF 14g TEK SCREWS TO EVERY RIB. ADDITIONAL FIXINGS MAY BE REQUIRED, REFER ENGINEER FOR ASSESSMENT. 2 MINIMUM PITCH. ROOF PANEL CUT BACKS CARRIED OUT ON SITE. "Z" FLASHING TO SEAL CORE IF REQUIRED. 4mm ALUMINIUM (TYP) ROOF SUPPORT STRUCTURE FASTEN GUTTER BRACKET THROUGH PANEL WITH BOLT WASHER AND NUT ASSEMBLY We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. SolarSpan - Technical Drawings v1 - Current 20/08/

12 Eaves Gutter Detail 2 - SOL13-WC04-2 TURN DOWN PAN APPROX 20 (SPECIAL TOOL AVAILABLE) EAVES GUTTER 14g TEK SCREWS TO EVERY RIB. ADDITIONAL FIXINGS MAY BE REQUIRED, REFER ENGINEER FOR ASSESSMENT. 2 MINIMUM PITCH. SOLARSPAN INSULATED ROOF ROOF PANEL CUT BACKS CARRIED OUT ON SITE. "Z" FLASHING TO SEAL CORE IF REQUIRED 4mm ALUMINIUM (TYP) ROOF SUPPORT STRUCTURE We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. 12 SolarSpan - Technical Drawings v2 - Current 20/08/2018

13 We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. SolarSpan - Technical Drawings v1 - Current 20/08/

14 We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. 14 SolarSpan - Technical Drawings v2 - Current 20/08/2018

15 We recommend that you should engage your local Bondor architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements. Panel by Bondor, screw may be by Bondor, all other items by others. Additional construction details are available through the Bondor Website Client Portal or by contacting a local Bondor representative. This drawing is copyright and the property of Metecno Pty Limited trading as Bondor. It is subject to their legal recall and may not be reproduced or it s contents divulged without written authority. SolarSpan - Technical Drawings v1 - Current 20/08/

16 Leaders in Thermal & Architectural Building Solutions BRISBANE/EXPORT 103 Ingram Road Acacia Ridge QLD 4110 Ph: (07) Fax: (07) ADELAIDE Rundle Road Salisbury South SA 5106 Ph: (08) Fax: (08) LAUNCESTON 7 Connector Park Drive Kings Meadows TAS 7249 Ph: (03) Fax: (03) PERTH 17 Gauge Circuit Canning Vale WA 6155 Ph: (08) Fax: (08) MELBOURNE 329A St Albans Road Sunshine VIC 3020 Ph: (03) Fax: (03) SYDNEY Newton Road Wetherill Park NSW 2164 Ph: (02) Fax: (02) ** Limited availability. ^ Darker colours warranted for use in limited regions. Metecno Pty Limited. ABN The manufacturer reserves the right to change the specification without notice. Bondor, LuxeWall, MetecnoInspire, Equitilt, BondorPanel, FlameGuard, MetecnoPanel, EconoClad, MetecnoKasset, InsulWall, LuxeWall, DesignerWall, SolarSpan, InsulRoof, MetecnoSpan, Purline, Equideck, InsulLiving, EconoClad, Metecno are trademarks of Metecno Pty Limited. BlueScope, Colorbond, Permagard and colour names are trademarks of BlueScope Steel Limited. Microban is a registered trade mark of the Microban Products Company. The colours shown in this publication have been reproduced to represent actual product colours as accurately as possible. However, given printing limitations, we recommend checking your chosen colour against an actual sample before placing orders. This advice is of a general nature only. Designers must provide for adequate structural performance and other Building Code requirements. This information is subject to change. Refer to Bondor website for latest version. Consult Bondor for your application. BON0535 Drawing Pack - SolarSpan v2 20/08/2018