Series 453 Commercial Double-Hung Window

Transcription

1 Commercial Double-Hung Window Photo courtesy of Superior Windows & Doors DATE: MAY 2013 REPLACES: MARCH 2008

2 KEY FEATURES/PERFORMANCE CHARACTERISTICS Scale: not to scale Vertical sliding double-hung sashes inlaid directly into commercial framing. Flyscreens tuck into dedicated recess in the jamb inlay adapter, supported with concealed nylon clips. The image below shows screen nested into frame. Complies with AS2047. High water resistance 200Pa. Sashes will bypass each other to allow cleaning of all glass from inside the building. Custom heavy duty key lockable catch with die-cast keeper. Fixed lowlights can be glazed from the inside in elevated situations by reversing the removable glazing beads and fitting custom captive wedge to the outside. Nailing fin frame makes the product suitable for cavity brick and brick veneer construction. Commercial Doube-Hung Window. External view. Maximum Panel Height* Maximum Panel Width* Maximum Glass Thickness 1050mm 1010mm 6.76mm * Subject to individual site conditions and wind loads. Contact AWS Technical Support for more information, techsupport@awsaustralia.com.au 2D & 3D CAD Files Available To access 2D & 3D CAD models visit our online specifier resource centre MORE INFORMATION For the latest updates regarding this product visit our website

3 Sound Reduction A number of glass combinations have been tested with this system to acheive sound reduction numbers listed below. Glass Description 5mm glass 6.38mm Laminated glass 7.52mm Laminated glass NOTE: The actual tests were carried out on a product very similar to this window (Series 514). Rating STC 27 db STC 27 db STC 28 db Scale: not to scale HOW TO SPECIFY SYSTEM NAME Elevate Aluminium Systems Commercial Double-hung Window FINISH Powder Coat Anodised WERS RATINGS Single Glazed Window ID Glass Type Uw SHGCw Tvw Inf AWS SnClr AWS SnClr AWS EVanBG AWS EVanClr AWS EVanGy AWS EVanSpB COLOUR Select from the AWS range of approved powder coat or anodising colours GLASS Specify thickness 20mm Specify thermal performance where applicable (Uv & SHGC) Specify acoustic performance where applicable (RW) AWS EVanSpGn AWS VLam AWS VLamGy AWS TLam AWS SnClr AWS SnGy AWS Sct AWS CPNtrl AWS CPClr AWS CPGn AWS CPGy NOTES 1. Uw is the whole window U-value 2. SHGCw is the whole window solar heat gain coefficient 3. Tvw is the whole window visible (light) transmittance 4. Maximum air infiltration is 5.0L/s.m2 at a positive pressure difference of 75 Pa as measured according to AS Static performance (Uw SHGCw Tvw Tdw) calculated using Window 6.3 and Therm 6.3 software (LBNL), Results disclosed at Australian Fenestration Rating Council (AFRC) regulations. 7. Ratings for use with Section J of the Building Code of Australia - Class 2-9 For the latest WERS data for this system visit Specification Assistance Need help specifying this product? techsupport@ awsaustralia.com.au and our qualified technical advisors will assist you with product selection and specification for your project

4 Design Features The detail on this page shows the custom head designed specifically for the double-hung window. Scale: not to scale Top rail is double sealed into the head for added weather performance. Sash top rail has finger recess to make opening and closing sash easier. The image below shows alternative 44mm wide nailing fin jamb.

5 Design Features Vertical sliding double-hung sashes inlaid directly into shopfront framing. Scale: not to scale Flyscreens tuck into dedicated recess in the jamb inlay adaptor, supported with concealed nylon clips. Complies with AS2047. Water resistance 200Pa. Sashes will bypass each other to allow cleaning of all glass from inside the building. Custom ANDO lockable catch with die cast keeper, or MIRO crescent type cam catches shown on later page. Sashes will accept glass up to 6.76mm thick. Standard 30mm nailing fin jamb illustrated right or alternative 44mm nailing fin wide jamb shown on previous page. Fixed lowlights can be glazed from the inside in elevated situations by reversing the removable glazing beads and fitting custom captive wedge to the outside. Nailing fin frame makes the product suitable for cavity brick and brick veneer construction. Matching horizontal sliding sashes into shopfront framing, refer Series 452. For higher performance heavy duty double-hung window, refer Series 463. Dedicated 90 and 135 couplers. Nailing fin sub-sill is standard on windows

6 HEAD & SILL DEATAILS Built-in nailing fin on head, jambs and subsill make this window significantly more waterproof and easier to install into brick veneer and cavity brick walls. Scale: FULL SIZE Head recessed to accept sash top rail. Head has built-in drip groove to guide water away from the sashes. Top rail double sealed to head for maximum protection. Recessed finger grip in sash top rail. Interlocking meeting rails. Large finger grip on sash bottom rail. Clean square finish sill. CAD file: DWG 453.DHW.1 Custom nailing fin sub-sill is ideal for brick veneer and cavity brick installation. We always recommend sub-sill under commercial windows.

7 JAMB DETAIL Scale: FULL SIZE & NTS Alternative 44mm wide jamb. Flyscreen frame secured in the jamb inlay adaptor recess with nylon flyscreen clips. Elevate custom extruded aluminium flyscreen frame illustrated. CAD file: DWG 453.DHW.1 Standard 30mm jamb Double-hung jamb adaptor has built-in external recess to accept flyscreens. Custom commercial framing with built-in nailing fin to facilitate installation into cavity brick and brick veneer construction. Frame will also accept a variety of building-in lugs

8 FLYSCREEN Scale: HALF FULL SIZE Flyscreen height = H Extruded aluminium flyscreen frame illustrated. We have dedicated Elevate extruded aluminium flyscreen frame or barrier type flyscreen frame that nests into framing. Fit flyscreen cross brace when screen height exceeds 1550mm. CAD file: DWG 453.DHW Flyscreen width = W - 94 using standard 30mm jambs W using alternative 44mm jambs Flyscreen frame secured in the jamb inlay adaptor recess with nylon flyscreen spring clips.

9 HIGHLIGHT TRANSOM DETAILS Scale: FULL SIZE & NTS Fixed over double-hung transom Alternative 44mm nailing fin jamb illustrated. Conventional fixed shopfront highlight with removable glazing bead on the inside of the head. Captive glazing wedge option illustrated. Fixed highlight drained down through the transom to the outside. Co-extruded Santoprene bulb seal. Weather bar built into transom assembly to ensure that this is a water tight assembly. Drill 8mm drainage holes. CAD file: DWG 453.DHW

10 LOWLIGHT TRANSOM DETAIL Double-hung over fixed transom Scale: FULL SIZE & NTS Alternative 44mm nailing fin jamb illustrated. Conventional fixed shopfront lowlight with removable glazing bead on the sill. Optional flyscreen illustrated. Flyscreen secured with moulded nylon clips. The clips keep the screen on centre and prevent screen rattling. Weatherpile seal. Clean square appearance. CAD file: DWG 453.DHW.2

11 CORNER MULLIONS AND SASH LOCKS Scale: NOT TO SCALE CAD file: DWG 453.DHW.7 90 Corner Mullion Framing snaps to corner mullions. No unsightly screws or rivets required. 135 Corner Mullion Note: These mullions are not load bearing. They can't be used to support the weight of building over. ANDO Lock can be fitted with custom ANDO lock. This lock can be coloured to match most frame colour options. MIRO Crescent Lock For higher traffic areas we offer a crescent type lock. This lock can be colour matched to most frame colour options

12 SASH STRENGTH RATINGS (Pa) Window Window Meeting Window Height Width Rails type mm mm S U D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D Wind Ratings (Pa) Meeting rails S = Serviceability limit state (deflection = L/150). U = Ultimate strength limit state (factored yield strength = 104 MPa). These tables have been calculated using nominal section properties. A typical assembly has been tested as per the requirements of AS2047, Ultimate strength rating has been limited to 4500 Pa Serviceability ratings were restricted by the maximum water resistance (200Pa) achieved on this product. Blank Denotes rating under 500 Pa. Scale: not to scale Standard meeting rail Ixx = x 10 3 mm 4