RE: canopy Hotel project Conditions for final SPA Signage and minor Site Plan changes/updates

Transcription

1 March 4, 2019 Lisa Nicholas, Deputy Director of Planning Division of Planning and Economic Development, City of Ithaca 108 E. Green Street, 3 rd Floor Ithaca, N.Y RE: canopy Hotel project Conditions for final SPA Signage and minor Site Plan changes/updates Dear Lisa, Thank you for reviewing this conditional SPR submission detailing signage and other changes/updates to the Site Plan. On behalf of the developer and design team, we are attaching the following package in compliance with the Conditions of Final Site Plan Approval, as detailed in the Approved Resolution dated January 24, Items included in this package are as follows: Page #1 Cover Page Page #2 Signage Plan Page #3 Sign A East Elevation Page #4 Sign A Details Page #5 Sign A Details Page #6 Sign B Details Page #7 Sign C Details Page #8 Fire Place Wall Vent Page #9 Ground Level Exterior Furniture Page #10 2 nd Floor Terrace Furniture Sincerely, Gaelin Walsh Phone: whitham@whithamdesign.com 142 East State Street, Rear 14850

2 CONDITIONS FOR SITE PLAN APPROVAL COVER PAGE Page 1

3 B A C SIGNAGE PLAN Page 2

4 East Elevation Scale: 1/16" = 1' 0" Frontage: 111' 3" A SIGN A - EAST ELEVATION Page 3

5 Gray indicates.125" aluminum support backer Electrical disconnect switch next to letterset (by others).040" alum. returns, 3" deep, painted Orange PMS 165c.177" thick white acrylic faces with dual color PSV (Orange Day/ White Night).125" aluminum angle bracket painted to match canopy 2" x 2" remote wireway positioned and painted to blend into canopy structure. Remote power supplies. J-box with primary electrical by others. Welded.125" aluminum gusset WALL BUSTER OR EQUIVALENT. PLTC CABLE, SEAL PASS- THRU w/ SILICONE Electrical disconnect switch inside building (by others) 1" Jewelite trim, painted Orange PMS 165c Internally illuminated with White LEDs COLORS Orange PMS 165c Canopy (typical) SIDE VIEW Scale: 1/2"=1".063" alum. CAD cut backs S.S. hardware as required by technical survey 3" deep letter descender Weep holes Volt: Power is based off 120 volt. If signs use anything other than 120 volt, then a difference in price will apply or a step down transformer will need to be used. SIGN A DETAILS Page 4

6 3" deep channel letters Orange Day / White night faces Orange returns SIGN A DETAILS Page 5

7 34' 6" 0.25" 0.25" DRILL & TAP 1/8" 1/4" PLATE ALUMINUM 3" X 3/16" (10-24) ALUMINUM STUD 1/4" PLATE ALUMINUM WALL SILICONE FILLED CAVITY MATERIALS / COLORS 1/4" aluminum backer with wood grain laminate finish (to match IPE Brazillian Walnut) 1/4" aluminum letters, returns painted matte black and digitally printed vinyl on faces Stud mount flush to fascia Scale: 3" = 1' 0" 2' 0" Flush w/ Studs 1' 6" 6" SIGN B DETAILS B SIGN B DETAILS Page 6

8 Scale: 3/4" = 1' 0" 3" 3" 3" 2' 2" 5' 4" 4' 6.25" 7" 4' 1.75" 3" 2" 3" 2' 7" Precast capstone fitted by others 3.75" 12" 4.25" deep fabricated alum. backer panel with wood grain laminate finish (to match IPE Brazillian Walnut) and 1/4" plate letters painted matte black with vinyl applied 1st surface 2' 8" 10" 8' 2" MATERIALS / COLORS Logo & Street Number:.5" painted aluminum City Name: Neighborhood:.25" painted aluminum Fonts: Town 21 Outline Medium Town 21 Outline Black Clarendon BT Black Paint to match Pure White EZRA: 4.25" deep fabricated alum. backer with wood grain laminate finish (to match IPE Brazillian Walnut) 1/4" aluminum letters, returns painted matte black and digitally printed vinyl on faces 1/4" or 1/2" DRILL & TAP 1/8" NOTES Customer will brick the 5' 4" wide area for Canopy, leaving the 2' 2" area for EZRA open as CMU. Backer panel should be 4.25" deep to be proud of the brick by 1/2" to 3/4", since standard brick is 3.625" deep. LSG will run a bead of caulk between the brick and the backer. External up-lighting by others 1/4" or 1/2" PLATE ALUMINUM WALL 3" X 3/16" (10-24) ALUMINUM STUD SILICONE FILLED CAVITY SIGN C DETAILS Flush w/ Studs (NTS) Scale: 3/4" = 1' 0" Page 7

9 Dura-Vent DirectVent Pro Horizontal Aluminum High-Wind Vent Rain Cap (square cap) Model # 58DVA-HC Finish: Aluminum Size: 16 x 16 with 6 7/8 projection from wall Install min. 12 clearance to window WALL VENT INSTALLATION East Elevation with Screen Fence Ithaca New York 05/21/2018 2/21/2019 FIRE PLACE WALL VENT Figure a Install the ventilation system in accordance with the manufacturer's instructions included with the components. (See 3.2.3). Install the unit in the desired location. Check to determine if studs, structural walls or rafters could pose a problem when fastening the vent system. Page 8

10 GROUND LEVEL EXTERIOR FURNITURE HEERENHUIS - APOLLO TABLE (square top, 24 W x 30 L X 30 H) Carrara marble top; Metal Base GUNMETAL INDUSTRY WEST MARAIS A SIDE CHAIR Page 9

11 (5) (45) SS (TOTAL) (1) PT (20) PD (TOTAL) (45) PD (TOTAL) AQ (60) TV (TOTAL) (4) AQ (23) PD (TOTAL) PT (5) AQ (5) (50) TV (TOTAL) PT PT (32) SS (TOTAL) (70) SS (TOTAL) (4) SSc (1) AL (1) AL (110) TV (TOTAL) (6) SSc (1) AL (7) SSc AQ PT (1) (5) (4) DWG NO: L-2.0 SCALE: 1/8" = 1'-0" DATE: 4/30/2018 2nd FLOOR TERRACE PLANTING PLAN N 2nd FLOOR TERRACE PLAN, FURNITURE LAYOUT TBD canopy Hotel 115 SENECA WAY ITHACA, NY 2ND FLOOR TERRACE FURNITURE Page 10