Multi-Family Load Requirements Form

Transcription

1 Multi-Family Load Requirements Form Date: Project Street Address Project/Business Name Property Legal Description: Lot: Block: Subdivision: Owner Information Site Engineer Information Electrical Engineer Information General Contractor Information Civil Contractor Information Revised Jan 2012 Page 1 of 5

2 Multi-Family Load Requirements Form ELECTRIC REQUIREMENTS FOR DESIGN Electronic Site Plan in AutoCAD format indicating all easements, existing site utilities and structures, desired meter location and desired pad transformer location. Additional surveys or plat information may be required to make other determinations. All existing and proposed primary conductor installations require developer provided utility easements either by the plat process or separate instrument easements. Civil, Landscape & Architectural construction plans (Arch. To show building face and elevations) Electric one line and Riser diagram Detailed breakdown of unit electric load Detailed building breakdown showing quantity and type of units per building and house meters Desired meter base type Requested service type: - Overhead - Underground Requested date for temporary service to site / / Requested date for permanent service to site / / Will gas service be utilized on this project? Yes No If above yes indicate gas meter location in relation to electric meter location. Electric Service Notes: All information requested by this document must be provided to the City prior to commencing with service design. Allow up to 15 business days for preliminary cost estimate and an additional 3 weeks (Minimum) for crew scheduling. Required permits, utility easements and site surveying will necessitate additional design time. All three-phase pad transformers will require a 14 to 18 week lead-time. Other equipment for project may have similar lead time. Service designs will be made based on least cost design method. Additional iterations of designs through customer requested changes or site plan changes may result and additional engineering fees. Changes in site development plans, delivery to site or non standard service methods will necessitate additional design time. Customer requested excess facilities over and above City s least cost design may result in additional charges to the customer. It is the customer s responsibility to clear right-of-way, bring site to grade and provide timely transmittal information requested for the installation of electric distribution facilities. Project Location: Select desired service voltage: - 1 Phase 120/240-3 Phase 120/208Y - 3 Phase 277/480Y - 3 Phase 120/240-3 Phase Other Revised Jan 2012 Page 2 of 5

3 CLUBHOUSE LOAD REQUIREMENTS: HVAC INFORMATION: Quantity Phase Volts Tons SEER Connected kw-each Heat kw-each MOTOR INFORMATION: Quantity Phase Volts HP-Each Start Type Equipment Description LIGHTING INFORMATION: WATER HEATING INFORMATION: KITCHEN INFORMATION: MISCELEANOUS INFORMATION: CONDITIONED SQUARE FOOTAGE: MAIN DISCONNECT SIZE: Signature-required Date-required Name-printed Contact Number Revised Jan 2012 Page 3 of 5

4 UNIT LOAD REQUIREMENTS :( complete one form for each unit type or house meter) UNIT TYPE # HVAC INFORMATION: Quantity Phase Volts Tons SEER Connected kw-each Heat kw-each MOTOR INFORMATION: Quantity Phase Volts HP-Each Start Type Equipment Description LIGHTING INFORMATION: WATER HEATING INFORMATION: KITCHEN INFORMATION: MISCELEANOUS INFORMATION: UNIT CONDITIONED SQUARE FOOTAGE: UNIT DISCONNECT SIZE: Signature-required Date-required Name-printed Contact Number Revised Jan 2012 Page 4 of 5

5 BUILDING-UNIT BREAKDOWN Main Main Main Main Main Main Main Main Main Main Main Main Revised Jan 2012 Page 5 of 5