Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Transcription

1 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 4 Whitehall Court Westminster London SW1A 2ES Contact: Mr S Blackman Tel: +44 (0) Fax: +44 (0) sccs@steelconstruction.org Website: SUMMARY OF ACCREDITED SCOPE provide certification of the following Management Systems Standards and related Sector Schemes as detailed in this schedule: Quality Management Systems (QMS) to ISO 9001: 2015 Environmental Management Systems (EMS) ISO 14001: 2015 Health and Safety Management Systems (HSMS) to BS OHSAS 18001: 2007 and ISO 45001: 2018 Page 1 of 6

2 QMS EMS HSMS KEY LOCATION ADDRESS 4 Whitehall Court Westminster London SW1A 2ES This Certification Body has demonstrated to UKAS that it has the systems and processes in place to provide the competence and capability, including understanding of local requirements, to manage and issue accredited management in the country in which it is established and the countries or region detailed in the table below, for the standards and scopes detailed on this schedule, unless specifically detailed in the individual Management System scope table (denoted by *). United Kingdom Republic of Ireland Page 2 of 6

3 QUALITY MANAGEMENT SYSTEMS In accordance with ISO 9001: 2015 Certification Accreditation Scope Reference (as defined in IAF ID 1) Full / Limited Accreditation Extent of Scope IAF 12 Chemicals, chemical products and fibres Limited Metal insulated cladding and roof panels for use in the steel construction industry IAF 17 Basic metals and fabricated metal products Limited Manufacture of structural steelwork Treatment and coating of metals Including: BS EN ISO 3834:2005 Quality Requirements for Fusion Welding of Metallic Materials IAF 28 Construction Limited Erection of constructional steelwork IAF 34 Engineering services Limited Engineering services associated with the steel construction industry ISO 9001 Sector Scheme Accreditation National Highway Sector Schemes NHSS 19A - For corrosion protection of ferrous materials by industrial coatings NHSS 20 - For the Execution of Steelwork in Transportation Infrastructure Assets NHSS 3 - For Stocking and Distribution Activities for Mechanical Fasteners NHSS 3B- For Stocking and Distribution Activities for Structural Steel Products Page 3 of 6

4 Directive Regulation Conformity Assessment / Procedure / Module / Article Category of Products or Individual Products Essential Requirements: Product Specification / Properties / Standards The Construction Products Regulation (EU) No 305/2011 Annex V FPC certification body to system 2+ 98/214/EC Structural metallic products and ancillaries (2/4) : Structural metallic construction members: finished metallic products such as trusses, girders, columns, stairs, ground piles, bearing piles and sheet piling, cut to size sections designedfor certain applications, and rails and sleepers. They can be unprotected or protected against corrosion by coating,welded or not (for uses in works s frames and foundations) EN :2009 EN :2009/AC:2010 EN :2009+A1: /214/EC as amended by EC Decision 2001/596/EC Structural metallic products and ancillaries (4/4) Structural Connectors Metallic rivets, bolts (nuts and washers) and H.R. bolts (high strength friction grip bolts), studs, screws railway fasteners for uses in structural metallic works BS EN :2005 BS EN :2015 BS EN : /214/EC Structural metallic products and ancillaries (1/4) : - Structural metallic sections/profiles: hot rolled, cold formed or otherwise produced sections/profiles with various shapes (T, L, H, U, Z, I, channels, angle, hollow, tubes), flat products (plate, sheet, strip), bars, castings, forgings made of various metallic materials, unprotected or protected against corrosion by coating (to be used in metal structures or in composite metal and concrete structures) Page 4 of 6

5 ENVIRONMENTAL MANAGEMENT SYSTEMS In accordance with ISO 14001: 2015 Certification Accreditation Scope Reference (as defined in IAF ID 1) Full / Limited Accreditation Extent of Scope IAF 12 Chemicals, chemical products and fibres Limited Metal insulated cladding and roof panels for use in the steel construction industry IAF 17 Basic metals and fabricated metal products Limited Manufacture of structural steelwork Treatment and coating of metals IAF 28 Construction Limited Erection of constructional steelwork IAF 34 Engineering services Limited Engineering services associated with the steel construction industry Page 5 of 6

6 HEALTH AND SAFETY MANAGEMENT SYSTEMS In accordance with BS OHSAS 18001: 2007 (OHSAS 18001: 2007) and ISO 45001: 2018 Certification Accreditation Scope Reference (as defined in IAF ID 1) Full / Limited Accreditation Extent of Scope IAF 12 Chemicals, chemical products and fibres Limited Metal insulated cladding and roof panels for use in the steel construction industry IAF 17 Basic metals and fabricated metal products Limited Manufacture of structural steelwork Treatment and coating of metals IAF 28 Construction Limited Erection of constructional steelwork IAF 34 Engineering services Limited Engineering services associated with the steel construction industry BS OHSAS 18001: 2007 (OHSAS 18001: 2007) and ISO 45001: 2018 Sector Scheme Accreditation SSIP Rule & Bylaws Issue 8.09 : November 2018 For organisations as defined by ISO for the following SSIP applicable categories: SSIP Approved SSIP Approved: Contractor SSIP Approved: Designer Page 6 of 6