Sl No. Sqm Sqm Sqm Cum Cum 0.73

Transcription

1 BOQ Name of Work: Repairing & repainting works at the adjunct room between Old block and New Extension Building in Second floor of Chemistry Department. Sl No Desription of Item Unit Qnty Rate Rate in Words Amount ( ) Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within the campus as per direction of Engineer-in-charge. In cement mortar A) The surface to be treated shall be clean from all debris and loose particles. All debonded particles shall be removed with wire brush and the surface should be clean and is SS: saturated surface dry condition and to the application of brushwood. B) Providing water proofing treatment with acrylic polymer modified cementious composite slurry coating of approved brand at recommendated rate as per 2mm in 2 coats over the sunken slab as per technical specification and as directed by Engineer in charge. Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii): 3 graded stone aggregate 20 mm nominal size). Sqm Sqm Sqm Cum 1.38 Cum 0.73

2 Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.: Cement mortar 1:4 (1 cement :4 coarse sand) 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.: Thermo- Mechanically Treated bars of grade Fe-500D or more. Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm. Sqm 8.03 Sqm 4.59 Sqm Sqm 7.3 Kg Sqm Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in- Charge:Granite work Metre 9.00

3 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification: Two or more coats on new work Sqm Sqm Sqm Providing and fixing at all height false ceiling of 6mm thick (white) finlight PVC foamed sheeth of Finolex (or equivalent) with necesssary screw of approved quality in 200 mm interval both direction to specified frame work, including providing and fixing of frame work made of special sections power accordance with zinc coating 600 as per IS:277 and consisting of angle angle cleats of size 25mm wide x 1.6 mm thick with flanges of 22 mm and 37mm dia x 40mm long with 6 mm dia bolts to the angle hanger being fixed with nut and bolts to G.I channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450, including providing fitting and fixing of 19 mm wide melamine polished teaknwood liping to each longitudinal directions joints all complete as per drawing and specification and direction of theengineerin-charge. Sqm Polishing on mosaic, marble/granite/kota stone flooring work wherever required to give high gloss finish complete. Sqm 20.40

4 Providing and fixing of laboratoty three way sink cock Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe: 32 mm dia Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length: 20 mm nominal bore Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length : 15 mm nominal bore Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. i 25 mm nominal outer dia Pipes Metre ii mm nominal inner dia Pipes Metre Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Sqm 7.00 Total

5 Rebate, if any Total, after rebate Say Total Total in words: (Rates are inclusive of all taxes, GST etc. applicable to the work as on the day of opening) Signature of Contractor with Seal