Baffles NORTON INDUSTRIES

Transcription

1 Baffles LOOKING FORWARD TO LOOKING UP NORTON INDUSTRIES INCORPORATED

2 Norton Industries O U R C O M M I T M E N T T O Y O U In 1967, Norton Industries entered the luminous ceilings market place. Our family is committed to designing and manufacturing the highest quality products with design flexibility to give you choices. Not only are our systems engineered to the last detail to assure perfection, but we do not stop when our products leave our plant. We provide expert technical assistance and support for the installation process. We make a superior product, and we make sure it is installed properly, so that you, the designer, as well as us, are proud to call it our own. After all, our family s name is on it. Jack Norton P R E S I D E N T Mary Pat Tricia Norton V I C E P R E S I D E N T

3 Baffles are an important part of any lighting design. Traditionally, baffles are used to illuminate the perimeter of a room or hallway and provide one directional shielding with a crisp linear appearance. Fluorescent lighting is typically used to illuminate this geometrically organized ceiling surface. New concepts of ceiling design have created unique applications for baffles to be used as general lighting, connecting columns to create a space or enclosing round reception areas. We offer standard baffles as well as designs that are completely unique.

4 N A X B Textured Extruded Aluminum Baffle The rigid textured extruded aluminum blades provide solid, substantial appearance while lowering the brightness. The baffle blade is 2" high and.085" thick. Blades are 2" on center for 45 degree shielding. Baffle width is determined by your finish opening and can be up to 24". Sections are 48" long and produced for continuous mount applications with half tabs on each end. Standard Finishes are Silver Satin, Lighting White, Gloss Black, Matte Black & Charcoal Bronze. Any custom painted finish is available. STANDARD WALL ANGLE TOLERANCE SLIP JOINT PERIMETER TRANSITION When designing a baffle into a lighting system, it is important to consider how the baffles will transition with the surfaces they will meet. We can provide the perimeter suspension, or, others can supply it. When you specify a custom color, it is strongly recommended that we supply the perimeter trim to assure proper color match. NGEAW NGEAW10 1" extruded wall angle NGEAW15 1-1/2" extruded wall angle NGEAW20 2" extruded wall angle SHADOWLINE WALL ANGLE NGEAW and NGE used in conjunction to create a slip joint which allows for field tolerance. CEILING TEE GRID SYSTEM NGESL1 A 1/4", B 1/4" NGESL2 A 1/2", B 1/2" NGESL3 A 3/4", B 3/4" NGE 2', 4' or 12' Tee Grid Suspension System CORNERS Attention to details can make the difference between a good project design, and a great one. When baffles turn a corner, using a herringbone corner gives your system a well thought out completed look. The standard corners are 135, 45 and 90 degrees. Of course, custom angles can be made. Be sure to mention herringbone corners in our specification to assure they are used in place of anything else. DIFFUSER OVERLAYS 100% virgin matte white acrylic top diffusers are available with all of our baffles. To specify this option, add S40A to the end of the baffle part number. 2

5 Extruded Fin Aluminum Baffle N A F B This unique extruded fin aluminum baffle design forms a slender fin dropping below the perimeter support rails. The blade is 2" deep and projects below the perimeter rail 1-1/4". The on center dimension of the baffle blade is 2", 3" or 4". Baffle width can be up to 24" and sections are 48" long and produced for continuous mount applications with half tabs on each end. Standard Finishes are Silver Satin, Lighting White, Gloss Black, Matte Black & Charcoal Bronze. Any custom painted finish is available. PART NO. DIMENSIONS The NAFB series baffles are available in curved sections in radius as small as 36". NAFB-2 NAFB-3 NAFB-4 2" on center blade spacing 3" on center blade spacing 4" on center blade spacing NAFB PERIMETER TRANSITION CORNERS Attention to details can make the difference between a good project design, and a great one. When baffles turn a corner, using a herringbone corner gives your system a well thought out completed look. The standard corners are 135, 45 and 90 degrees. Of course, custom angles can be made. Be sure to mention herringbone corners in our specification to assure they are used in place of anything else. DIFFUSER OVERLAYS 100% virgin matte white acrylic top diffusers are available with all of our baffles. To specify this option, add S40A to the end of the baffle part number. 3

6 S L S Steffy Light Shield The Steffy Light Shield is a straight forward design to block the glare from incandescent lamps in a wall wash slot application. Formed aluminum light shields eliminate glare without interrupting the light pattern. SLS Shields are made 4" x 5" for small bulbs and 8" x 10" for larger bulbs. Steffy Light Shields are finished in a durable Polene finish in Lighting White, Gloss Black, Silver Satin or to your specifications. Any custom painted finish is available. PART NO. SLS45 SLS810 DIMENSIONS 4" x 5" shield 8" x 10" shield N C B - P Cantilevered Curved Flexible Parabolic Baffle This great design allows you to use a parabolic blade baffle up to 7" wide free float along a gentle curve. The Mounting bracket is flexible and is fastened to the drywall. The baffle simply hooks into position. This baffle is 1-1/2" deep and available 2" or 3" on center. If your cove is over 7" wide, the floating side needs to be supported using wall angle. Finishes available are Semi Specular Silver, Full Specular Silver, Gold Anodized and any painted finish. PART NO. NCB-P-2 NCB-P-3 DIMENSIONS 2" Blade Spacing 3" Blade Spacing 4

7 Translucent Acrylic Baffle N T B A Make a statement with this glowing alternative to perimeter lighting. This baffle is available up to 14" wide and the blades are 1/4" translucent white acrylic. The top panel is also translucent white acrylic. The baffle glows while providing a visual linear pattern that eliminates glare from the lamps. This baffle is available 1-1/2" or 2" deep with spacing up to 4" on center. PART NO. NTBA NTBA NTBA NTBA NTBA NTBA DIMENSIONS 1-1/2" deep, 1-1/2" blade spacing 1-1/2" deep, 2" blade spacing 1-1/2" deep, 3" blade spacing 2" deep, 2" blade spacing 2" deep, 3" blade spacing 2" deep, 4" blade spacing STANDARD WALL ANGLE TOLERANCE SLIP JOINT PERIMETER TRANSITION When designing a baffle into a lighting system, it is important to consider how the baffles will transition with the surfaces they will meet. We can provide the perimeter suspension, or, others can supply it. When you specify a custom color, it is strongly recommended that we supply the perimeter trim to assure proper color match. NGEAW NGEAW10 1" extruded wall angle NGEAW15 1-1/2" extruded wall angle NGEAW20 2" extruded wall angle SHADOWLINE WALL ANGLE NGEAW and NGE used in conjunction to create a slip joint which allows for field tolerance. CEILING TEE GRID SYSTEM NGESL1 A 1/4", B 1/4" NGESL2 A 1/2", B 1/2" NGESL3 A 3/4", B 3/4" NGE 2', 4' or 12' Tee Grid Suspension System CORNERS Attention to details can make the difference between a good project design, and a great one. When baffles turn a corner, using a herringbone corner gives your system a well thought out completed look. The standard corners are 135, 45 and 90 degrees. Of course, custom angles can be made. Be sure to mention herringbone corners in our specification to assure they are used in place of anything else. 5

8 N A S B Single Blade Aluminum Baffle This conventional, economical and simple approach to shielding is a classic. The simplicity of this design lends to its popularity. This is an effective means of providing a wash of light to walls, corridors and featured areas at a reasonable cost. Baffle ends abut to form a continuous appearance and provide full plenum access. The specular finishes available are silver anodized and gold anodized. The standard painted finishes available are Lighting White, Silver Satin, Black and Charcoal Bronze. For NASB part numbers and dimensions see page 9. Any custom painted finish is available. STANDARD WALL ANGLE TOLERANCE SLIP JOINT PERIMETER TRANSITION When designing a baffle into a lighting system, it is important to consider how the baffles will transition with the surfaces they will meet. We can provide the perimeter suspension, or, others can supply it. When you specify a custom color, it is strongly recommended that we supply the perimeter trim to assure proper color match. NGEAW NGEAW10 1" extruded wall angle NGEAW15 1-1/2" extruded wall angle NGEAW20 2" extruded wall angle SHADOWLINE WALL ANGLE NGEAW and NGE used in conjunction to create a slip joint which allows for field tolerance. CEILING TEE GRID SYSTEM NGESL1 A 1/4", B 1/4" NGESL2 A 1/2", B 1/2" NGESL3 A 3/4", B 3/4" NGE 2', 4' or 12' Tee Grid Suspension System CORNERS Attention to details can make the difference between a good project design, and a great one. When baffles turn a corner, using a herringbone corner gives your system a well thought out completed look. The standard corners are 135, 45 and 90 degrees. Of course, custom angles can be made. Be sure to mention herringbone corners in our specification to assure they are used in place of anything else. DIFFUSER OVERLAYS 100% virgin matte white acrylic top diffusers are available with all of our baffles. To specify this option, add S40A to the end of the baffle part number. 6

9 Bold Blade Bold Blade Aluminum Baffle N A B B Our Bold Blade Aluminum Baffle provides a comfortable well shielded lighting design which integrates into a continuous architectural statement. The Blade of the Baffle is 3/16" thick. The heavy duty design allows for greater width spans. Our Bold Blade Baffles are intended to abut for a continuous appearance. Each section is easily removed for maintenance and access to the plenum. The standard painted finishes available are Lighting White, Silver Satin, Black and Charcoal Bronze. Any custom painted finish is available. For NABB part numbers and dimensions see page 9. STANDARD WALL ANGLE TOLERANCE SLIP JOINT PERIMETER TRANSITION When designing a baffle into a lighting system, it is important to consider how the baffles will transition with the surfaces they will meet. We can provide the perimeter suspension, or, others can supply it. When you specify a custom color, it is strongly recommended that we supply the perimeter trim to assure proper color match. NGEAW NGEAW10 1" extruded wall angle NGEAW15 1-1/2" extruded wall angle NGEAW20 2" extruded wall angle SHADOWLINE WALL ANGLE NGEAW and NGE used in conjunction to create a slip joint which allows for field tolerance. CEILING TEE GRID SYSTEM NGESL1 A 1/4", B 1/4" NGESL2 A 1/2", B 1/2" NGESL3 A 3/4", B 3/4" NGE 2', 4' or 12' Tee Grid Suspension System CORNERS Attention to details can make the difference between a good project design, and a great one. When baffles turn a corner, using a herringbone corner gives your system a well thought out completed look. The standard corners are 135, 45 and 90 degrees. Of course, custom angles can be made. Be sure to mention herringbone corners in our specification to assure they are used in place of anything else. DIFFUSER OVERLAYS 100% virgin matte white acrylic top diffusers are available with all of our baffles. To specify this option, add S40A to the end of the baffle part number. 7

10 N A P B Parabolic Blade Aluminum Baffle Parabolic Blade Aluminum Baffles are intended to be very flexible so that their scale, finish and spacing can best fit your application. Our Parabolic Blade Baffles are intended to abut for a continuous appearance. Each section is easily removed for maintenance and access to the plenum. These baffles are most commonly used in specular finishes. Any painted finish is also available. The standard specular finishes are: Semi Specular Silver, Full Specular Silver, Semi Specular Gold and Full Specular Gold. For NAPB Part numbers and dimensions see page 9. STANDARD WALL ANGLE TOLERANCE SLIP JOINT PERIMETER TRANSITION When designing a baffle into a lighting system, it is important to consider how the baffles will transition with the surfaces they will meet. We can provide the perimeter suspension, or, others can supply it. When you specify a custom color, it is strongly recommended that we supply the perimeter trim to assure proper color match. NGEAW NGEAW10 1" extruded wall angle NGEAW15 1-1/2" extruded wall angle NGEAW20 2" extruded wall angle SHADOWLINE WALL ANGLE NGEAW and NGE used in conjunction to create a slip joint which allows for field tolerance. CEILING TEE GRID SYSTEM NGESL1 A 1/4", B 1/4" NGESL2 A 1/2", B 1/2" NGESL3 A 3/4", B 3/4" NGE 2', 4' or 12' Tee Grid Suspension System CORNERS Attention to details can make the difference between a good project design, and a great one. When baffles turn a corner, using a herringbone corner gives your system a well thought out completed look. The standard corners are 135, 45 and 90 degrees. Of course, custom angles can be made. Be sure to mention herringbone corners in our specification to assure they are used in place of anything else. DIFFUSER OVERLAYS 100% virgin matte white acrylic top diffusers are available with all of our baffles. To specify this option, add S40A to the end of the baffle part number. 8

11 NASB Catalog Blade Metal Maximum Number Height Spacing Thickness Width SB050 1/2" 1/2".025" 7" SB050-A 1/2" 3/4".025" 7" SB075 3/4" 3/4".025" 7" SB075-A 3/4" 1".025" 7" SB100 1" 1".040" 12" SB100-A 1" 1-1/2".040" 12" SB /2" 1-1/2".040" 12" SB150-A 1-1/2" 2".040" 12" SB200 2" 2".040" 12" SB200-A 2" 3".040" 12" SB300 3" 3".040" 12" SB300-A 3" 4".040" 12" NABB Catalog Blade Maximum Number Height Spacing Width NABB1010 1" 1" 12" NABB1015 1" 1-1/2" 12" NABB1020 1" 2" 12" NABB /2" 1-1/2" 14" NABB /2" 2" 14" NABB /2" 3" 14" NABB2020 2" 2" 16" NABB2030 2" 3" 16" NABB2040 2" 4" 16" NAPB Catalog Blade Maximum Number Height Spacing Width NAPB7510 3/4" 1" 7" NAPB7515 3/4" 1-1/2" 7" NAPB /2" 1-1/2" 12" NAPB /2" 2" 12" NAPB /2" 2-1/2" 12" NAPB /2" 3" 12" NAPB /2" 4" 12" NAPB2020 2" 2" 14" NAPB2030 2" 3" 14" NAPB2040 2" 4" 14" NAPB3030 3" 3" 14" NAPB3040 3" 4" 14" NAPB4040 4" 4" 16" NAPB4050 4" 5" 16" 9

12 NORTON INDUSTRIES INCORPORATED 1366 WEST 117TH STREET, LAKEWOOD, OHIO USA TEL (216) (888) FAX (216) (800) A S K F O R O U R O T H E R C ATA L O G S : Wood Louver Ceilings Wood Panel Ceilings Skylites Wood Coffers Metal Coffers Custom Suspension Systems Linear Wood Cell Systems Albus Coffers Louvers & Lenses Metal Beam