Dena Industrial Group

Transcription

1 Business Name : Dena Industrial Group Adress: Head office : Toos Industrial Estate, phase no.1, SouthkoosheshSt.Mashhad,Iran Factory1 : Chenaran Industrial Estate,Sanat no.20.chenaran,(mashhad),iran Factory2 : Toos Industrial Estate, phase no.2. Andisheno.10.Mashhad,Iran Tel :+98(51) Fax : +98(51) Dena.co20@yahoo.com

2 Content 1. Introduction Foreign business partners Products. 4. Production Phases.. 5. Machinery and equipment Human Resource 7. Quality management system 8. Photos..

3

4 Holding-PolySoolehHoldingincludeseight company. Withover25yearsofexperience, DENACoandPOLYSOOLEHCo. The production capacity of the DENA company for steel structures is 2500 tons andpolysoolehis 5000tonsin oneworkingshift permonth. DENA Sooleh is located on 100,000 square meters land and has over 30,000 square meters ofproductionfacilities. Polysooleh is located on 150,000 square meters land and has over 60,000 square meters ofproductionfacilieties.

5 With over 25 years of experience, DENA and Polysooleh is active in manufacturing and installation of steel structures such as industrial plants and residential-commercial high-rises. This company is currently, Using from the presence of experienced engineers and technicians, who are quite knowledgeable about up to date standards and regulations. They start off the projects by calculation and design procedure for static structures which leads to preparingprecise technicaldrawings. The production capacity of our company for manufacturing, shot blasting, transport and assembling of steel structures is over 7500 tons in one working shifts per month; This is possible only by having more than 250,000 square meters area andover 90,000squaremeters ofproductionfacilities. The features which distinguish DENA Co. from other companies are: our high production capacity,high quality and speed of production and installation of structures. These important features are achieved by the help of its skilled personnel,modern equipmentsandpowerfulmanagement principles.

6

7 Business Name Representative Address Head Office Haman Factory Business Reg. No. Established Date Incorporated Date Business Category Business Products Factory Size Changyeong Haman Number of Employees Shinwoo Heavy Industriies Co., Ltd. Ahn,Byoung-Ku Daeji agriculture & Industrial Complex, Daeji-myeon, Changyeong-gun, Gyeongsangnam-do Tel, 055) Fax, 055) Moro Agriculture & Industrial Complex, Gunbuk-myeon, Haman-gun, Gyeongsangnam-do Tel, 055) Fax, 055) , 07, , 06, 24 Manufacturing, Wholesale and Services Cranes, Pumps, Industrial automation equipments Land: 6,710m² / Building: 3,829m² Land: 23,140m² / Building: 10,560m² 380

8 Projects

9 Projects

10 Certificate

11 Certificate

12 Head Office Daeji Agriculture & Industrial Complex, Daeji-myeon, Changyeong-gun, Gyeongsangnam-do Tel, 055) Fax, 055) Haman Factory Moro Agriculture & Industrial Complex, Gunbuk-myeon, Haman-gun, Gyeongsangnam-do Tel, 055) Fax, 055)

13 History Dec : Company established as PRIME HEAVY INDUSTRY (Korea) Jan : Company established as PRIME HEAVY INDUSTRY (China) Nov : Certificate of registration for ISO 9001 Dec. 2013: Awarded $5 million Tower of Exports Jul. 2015: Certificate of Conformity of Factory Production Control (CE Marking) Dec. 2015: Awarded $10 million Tower of Exports Feb. 2016: Certificate of registration for ISO Feb. 2016: Research and development department established Engineering (Investment Company) Jan : JUYOUNG ENGINEERING CO., LTD : 3D Structure and Shop Dwg. HEAD OFFICE : ADDRESS : Room 706, 17 YEOUIDAEBANG-RO 65-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA (07332) CONTACT No. : TEL / FAX KOREA FACTORY ADDRESS : 64 DEONDEURE-GIL YEOJU-SI, GYEONGGI-DO, KOREA (12659) CONTACT No. : TEL / FAX CHINA FACTORY ADDRESS : NO.1 NANNING ROAD, ECONOMIC DEVELOPMENT ZONE, PENGLAI, SHANDONG PROVINCE, CHINA (265609) CONTACT No. : TEL / FAX

14 FACTORY KOREA FACTORY SECTION FACTORY SIZE FACTORY AREA FABRICATED OF STEEL STRUCTURE FABRICATED OF EQUIPMENT WELD BUILT-UP FOR H-SHAPE DESCRIPTION W160 MXL250M 40,000 m2 1,500TON /MONTH (18,000 TON /YEAR) 500TON /MONTH (6,000TON/YEAR) 2,400TON /Month(28,000ton/YEAR) H3,000 XW1,000 XWEB 60tX FNG 80t

15 FACTORY CHINA FACTORY SECTION FACTORY SIZE FACTORY AREA FABRICATEDOF STEEL STRUCTURE FABRICATED OFEQUIPMENT WELD BUILT-UP FOR H-SHAPE DESCRIPTION W200m x L250m 50,705 m2 1,500TON / MONTH (18,000 TON / YEAR) 500TON / MONTH (6,000TON / YEAR) 2,400TON / Month (28,000ton / YEAR) H3,000 X W1,000 X WEB 60t X FNG 80t

16 Projects

17 Projects

18 Projects 12.7 BASF /YEOSU CFBC POWER PLANT

19 Projects

20 Certificate

21 China Factory (YANTAI) Korea Factory (YEOJU)

22

23 Industrialstructures: Construction of industrial plants and warehouses,such as: SAMANDAROUPRODUCTION PLANT. MASHHAD INTERNATIONALFINANCIAL&ECONOMICAL CENTER PAZH ZAVEHCEMENT PLANT BOJNOURDAIRPORT KHAYAM-STEEL PLANT Residential and office towers: High-rise structures,multi-storey structures, And commercial towers such as : MASHHAD MALL HOTELS &COMMERCIAL COMPLEX PADIDEH SHANDIZ HOTELS &COMMERCIAL COMPLEX Steelbridges: Bridgesoverexisting highways,such assarakhsbridge.

24

25 Preparationof shopdrawings: First in the engineering management office, the plans are closely surveyed. Then by using advanced software, the experts prepare the plans in order to obtain the approvalof the clients; At the same time, they develop a scheduled plan of the works, volumes and weights of different required materials, also making estimates of standards and developmentprocedures of the plan; The required instructions will be issued according to the scheduled plan for the supply of necessarymaterials; Material supply process: according to the client orders

26 Ironwork : Steel Sheets is usually supplied by domestic providers such as Zob Ahan Esfahan, Mobarakeh Steel facilities and Kaavian Steel company. Some of the hot rolled sections that are not produced in Iran they are purchased from reliable sources outside of Iran ensuring the client s approval. Quality certificates of all the materials is presented to the client upon request.

27 Bolts & Nuts and paint: Bolts, Nuts and paints are the main required materials which their specifications are stated in the contract and usually purchased from domestic sources or imported from outside, according to our restrict principle of keeping our client satisfied. Meanwhile the interests of the client is ensured and quality certificates of the purchase is placed atthe disposalof the client.

28 Testing the materials: All items entering the factory are inspected by the quality control department for quantity and quality, to ensure compliance with technical specifications before being docked and transported to warehouses. Essentially, the issuance of factory warehouse receipt is subject to the approval of quality control unit. In addition, samples of the imported products are sent off to accredited laboratories for additional tests in order to expand the scope of this unit sactivities to ensure satisfaction of the client.

29 Cutting: Each component of a structure is identified and cut into their suitable sizes and thickness using multiple tools, resulting in pieces with specific characteristics and edgesthatare later joined togetheraccording the main plan. Assembling: The already cut components are joined together according to the shop drawings in an other unit using special tools and equipments. Joined components are then connected to each other by spot welding. At the end of this stage the appearance of the piece is completed. Welding: Discharged components from the assembly unit are transferred to the welding units and according to the procedure specified in the technical documentation known as the Treatyof Welding Procedure Systemare welded together.

30 Cleaning: In this stage, components are taken to another unit, where trained and experienced staff perform welding tack, cleaning and grinding activities on them. The components discharged from this stage, which are transferred to painting unit, should be free of any extra slag,spater,arc etc. Sand blasting/ shot blasting: The cleaned components are transferred to sand blasting/shot blast unit and in accordance with the technical specifications of the contract are blasted with silica sand or steelpellets. Painting: The cleaned components from the sand blasting unit must be immediately transferred to the paint shop. Different paints depending on their chemical basis or shades defined in terms of their thickness of dry film are applied on the components in adustfree environment.

31 Packing and Shipping: The final phase of construction includes the packing of the painted parts. Our qualified personnel carry out this stage so that during the transfer no damage is ocurred, which ultimately may lead to non-compliance or failure in one of the dimensions of the parts. At the same time, placing protective material prevents damage to the paint during the transfer.properarrangement of painted pieces together maximizes the load capacity,as well as savingthe costs of the shipment.

32 Installation: steel structure pieces sent to the project site are installed by our qualified installation personnel in accordance with the approved plans. Inspection and supervision: Steel structure pieces sent to the project site are inspected by our experienced personnel to comply exactly to the approved drawings. Planning and project control: Loads sent to the project site are installed in accordance with approved plans and features by our qualified and skilled installation personnel

33

34 TRANSFER EQUIPMENT Facilities Number Overhead Crane, capacities: 2, 5, 10, 16, and 25 ton; Site Mobile Crane Gantry Overhead 2 37 Crane, capacity: 10 ton; Up to 25 Ton 1 KatoCrane, capacity: 30 ton; Up to 20 Ton 1 Lift Truck, capacities: 3to 35 ton; Lift truck Up to 17 Ton Up to 10 Ton 1 2 Up to 7 Ton 2 Up to 3 Ton 2 Trailer Backbreaking Insole 1 4 Tractor 1 Towtruck 1

35 PRODUCTION MACHINERY 7in 1 cutting and punching machine; Brake Press machine, capacities: 300 and 500 ton; Guillotine,3mm, 20 to 30 mm cutting ; Guillotine,2mm, 6 mm cutting ; Guillotine,6mm, 20 to 25 mm cutting ; Large Radial PressMachine; 60,250 ton Kick Press; Guillotine, 6m,20 to 25 mm cutting capacity; Magnetic Drill; ZPunch; Straightener; Hydraulic Press,250 ton; BoxProduction Line; AutomaticHBeamStraightening Line;

36 PRODUCTION MACHINERY ShotBlaster,300*300 cm, 20 nozzles; Decoiler Wheel, up to 16 mm thickness; Lathe, 1.5m; CNC Lathe; Beveling machines; Hack SawMachine; ZPunch; Straightener; Hydraulic Press,250 ton; BoxProduction Line; AirCutting Machine; CNC Drilling Machine; Radial Drilling Machine ; Plate Straighter;

37 PREPRATION EQUIPMENT Castellated Beam Production Machine; Friction Saw; Band Sawforcolumn cutting; Facilities Number Roll 2 Impact Press 63 Ton 4 Multifunctional Ton 1 Hydraulic Press 200 Ton Ton 1 40 Ton 1 exfoliation 1.5 m 1 Exfoliation page *6 2 Guillotine 3000 * * 20 2 CNC 2 Air Cuting Straighter 4 Rail/Electric 17 Saw Fire 2 Narrow 1 Z Punch 1 Grinding Stone Simple manual 56 walled 2 CNC Radial 2 Simple Radial 14 Drill column Radial 2 Triaxial 1 magnet 37

38 ASSEMBLE EQUIPMENT Facilities Number Double-Nozzle Submerged CO2 121 Welding Machine; Single-Nozzle Submerged Welding Machine; Welding Rectifier; CO2 Welding Machine; Automatic Air Cutting Machine; Sandblasting; Diesel Welding Machine; Sandblasting Compressor; Automatic H Beam Welding Line; Welding machine Electroslag 6 Straighter Box Maker H Maker Submerged 20 mm 40 mm Mecanical Hydraulic Beveling machine 3 Shot blasting machine 2

39 INACCESSIBLE EQUIPMENT 400-KVA ; Emergency Power Facilities Number Generator; CO2 Tank, capacity: 25 ton; 2-MW power transformer; Argon and oxygen tanks, capacity: 13 ton; Shot Blasting, 110*150 cm, 6 nozzles; CO2 Tank Argon 1 Oxygen m³/h 3 Compressor 8.3 m³/h 3 Power transformer 315 KVA 6

40

41 personnel PHD graduate Number 2 MScgraduate 6 Bachelor degree 32 Technical operator 17 Skilledworkers 230

42

43 IMS Management Systems ISO 9001 : 2008 ISO ISO : 2004 OHSAS : 2007

44

45

46

47

48

49

50

51

52

53 Address: ToosIndustrialEstate,phaseI SouthkoosheshSt. Mashhad,Iran Tel :+98(51) Fax : +98(51) Dena.co20@yahoo.com