Industrial Products Catalog

Transcription

1 Specialty Tape C & CM P & g & HVA al io n P a c k a gi n ng, t uc O p ti c r Con st p l ia n c e s il d i & Ap Bu n s o o ati rt E l e c t r o ni c Tran sp Industrial Products Catalog Sp ecialty

2 2 Avery Dennison stus.averydennison.com

3 Table of Contents Index...3 About Avery Dennison...4 Fundamentals of Pressure-Sensitive Adhesives...5 Measuring Performance...7 Adhesive Chemistries & Characteristics, Key Application Factors...8 Material Substrates, Surface Contamination, Surface Texture...9 Surface Contour,...10 Surface Energy...11 Liners and Liner Selection Chart, Best Practices...12 TRANSFER TAPE PRODUCTS Rubber Based Adhesives FT 165 J...13 FT Acrylic Based Adhesives FT FT 1122 HLP...13 FT 1125 HLP...13 FT FT HPA 1902 J...14 HPA 1902 PET J...14 HPA 1905 J...14 HPA 1905 PET J...14 Modified Acrylic Based Adhesives FT FT FT PT BD...15 FT 1147 Low VOC J...15 FT 1149 Low VOC...15 FT FT 1906 FR J...16 FT 0720 DL-C Clear...16 FT 0720 DL-W White...16 UHA Acrylic Based Adhesives UHA 1185 HLP...16 UHA Rubber Based Adhesives UHA UHA UHA UHA Silicone Adhesives FT 3012 J...17 Double Coated Products Rubber Based Adhesives FT FT 666 J...18 FT FT FT FT PT BD J...18 FT 8327 J...18 FT PT BD J...18 FT FT FT FT 9325 PG J...19 FT 9330 J...19 FT B...19 FT B 12 PT BD...19 FT C...19 FT D...20 FT E FT EZ Acrylic Based Adhesives FT 702P...20 FT FT A...20 Modified Acrylic Based Adhesives FT FT 7951 J...21 FT FT 8260 Low VOC J...21 FT FT FT FT 9361 Low VOC J...22 Rubber/Acrylic Adhesives FT 310 J...22 FT FT FT PT BD...22 UHA Acrylic Based Adhesives UHA UHA Rubber Based Adhesives UHA UHA Rubber Based Adhesives UHA Acrylic Based Adhesives UHA UHA Silicone Adhesives FT 9302M J...24 DOUBLE COATED Polyethylene Foam Products Rubber Based Adhesives FM FM Acrylic Based Adhesives FM Modified Acrylic Based Adhesives FM FM DOUBLE COATED Elastomeric Foam Products XHA Based Adhesives XHA 9700 Series J...26 Foil Products Rubber Based Adhesives FT FL FL Acrylic Based Adhesives FT FL UHA Acrylic Based Adhesives UHA Specialty Products Modified Acrylic Based Adhesives (Ultra High Molecular Weight PE) UHMW UHMW Modified Acrylic Based Adhesives (Flock) FT 0900 B...28 FT 0900 B PET...28 Acrylic Based Adhesives (Single Coated) FT 0411 J...29 Tapes Requiring Uncoated Slit Edges, Slitting Services, Rewinding, Printing Services...30 Packaging Standards...31 Avery Claims...33 Conditions and Terms of Sale...35 J = PRODUCT Avery Dennison EcoFriendly is a trademark of Avery Dennison Corporation. This mark indicates that these products and materials were produced with environmentally beneficial features. Avery Dennison stus.averydennison.com 3

4 Why Avery Dennison? A FORTUNE 500 company Over $6.3 billion in sales Over 36,000 individuals in over 60 countries worldwide Global leader in pressure-sensitive labeling materials, retail tag, ticketing and branding systems, and office products Specialty Tape Division Committed to Your Success World-class operation specializing in high-performance pressure-sensitive adhesive tapes for the industrial, medical and consumer market segments Facilities in North America, Europe, Asia and South America Over 30 years of innovative adhesive technologies, strong applications support, market leading product performance and unmatched customer service Service When and Where You Need It Discuss new applications Quick price quotation Next day product samples Same day order confirmation Technical assistance Product training Technical data sheets and industry specs online Capabilities Adhesive coat weight ranges mils Coating width ranges Product portfolio Solvent, emulsion and hot melt based adhesives Certifications and Quality Standards ISO.IEC 17025:2005 laboratory certification ISO 9001:2000 If you are inquiring about purchasing Avery Dennison products for the first time, please call inside sales for assistance at 866-GO-AVERY ( ) or visit us online at Avery Dennison will continue to set new standards for quality, innovation and superior service to help you market and grow your business. 4 Avery Dennison stus.averydennison.com

5 Fundamentals of Pressure-Sensitive Adhesives (PSA) Pressure-sensitive describes a distinct category of adhesive tapes in dry (solvent free) form that are aggressive and permanently tacky at room temperature. They require no activation by water, solvent or heat. PSA Tapes Can Consist of Four Basic Components: 1. Carrier (or Facestock) Component on which the adhesive coating is applied. 2. Adhesive Component that provides adhesion to the substrate. 3. Release Coating Applied to the release liner and cured. Allows adhesive to separate from the liner without contaminating the adhesive. This component plays a major part in the functionality of a finished PSA product. 4. Release Coated Liner Component plays a crucial role in the production, processing and application of the PSA. Facestock Adhesive Release Liner PSA Constructions The various PSA tape components are combined and supplied in the following basic constructions: Single Coated (Self-Wound) The adhesive is coated on one side of a facestock. The other side is generally coated with silicone to enable the tape to unwind easily. Facestock Adhesive Provides wrap around sealing Acts as closure system Potential label stock Can provide moisture vapor barrier Single Coated (Self-Wound) Single Coated (Linered) The adhesive is coated on one side of a facestock. A release liner coated on one side with silicone protects the adhesive. Potential label stock Foil insulation tapes Single Coated (Linered) Facestock Adhesive Release Liner Transfer Tape (Unsupported) A film of unsupported adhesive is coated directly onto a siliconized release The release liner is coated with silicone on both sides to ensure that the tape unwinds easily and can be laminated to various substrates. Double-linered transfer tape constructions may be offered. Offers superior conformability Ideal for nameplate mounting and foam bonding Transfer Tape (Unsupported) Release Liner Adhesive Avery Dennison stus.averydennison.com 5

6 PSA Constructions Double-Coated The adhesive is coated on both sides of a carrier material. This construction is provided on a liner coated on both sides with silicone. Double-linered, double-coated constructions may be offered. Offers improved internal strength Greater dimensional stability Easily slit into narrow rolls Adds support to otherwise stretchy materials Double Coated Release Liner Adhesive Carrier (paper, film, tissue, foam or nonwoven) Adhesive Release Liner Heat-Activated A heat activated film laminated to a pressure sensitive adhesive on a release liner coated on both sides with silicone. Designed for difficult to bond materials Ideal for shipping pads, non-slip step pads and certain sound damping materials Heat-Activated Adhesive Heat-Activated Bonding Layer 6 Avery Dennison stus.averydennison.com

7 Measuring Performance Adhesives have many performance properties which are specified and measured depending on the end application. Three common performance properties include adhesion, tack and cohesion. These properties and the recommended method of measurement are detailed below. Stainless Steel Test Panel Adhesive Sample Supported with 2 mil PET Backing Force Adhesive Surface in Contact with Test Panel Adhesion Adhesion is the molecular force of attraction or bond between the adhesive and the surface it is in contact with. The strength of the attraction or bond is determined by the material s surface energy and the chemical makeup of the adhesive. A pressure-sensitive adhesive s measure of performance is expressed in ounces, pounds or the metric equivalents per inch width as the tape is pulled at a 180-degree angle, 12 inches per minute, usually off a polished stainless steel panel. A 90-degree version of this test is used when testing foam carrier tape adhesion. Force Adhesive Sample Supported with 2 mil PET Adhesive Surface in Contact with Test Area Tack Tack is the property of a pressure-sensitive adhesive that allows it to adhere to a surface with very light pressure and a minimum contact time (often referred to as quick stick ). It also refers to the ability of the adhesive to quickly wet out on the surface. During testing, no pressure is applied to the tape. Instead a loop of tape is lowered to a stainless steel surface until contact is made. The tape loop is pulled back at 20 inches per minute. Stellite Bar Stainless Steel Panel Adhesive Tape Supported with 2 mil PET Cohesion Cohesion, or cohesive strength, refers to the internal strength of an adhesive and its ability to resist splitting or slippage caused by external shear forces. Cohesion is measured by its resistance to forces parallel to the surface. A standard area of tape is applied to a vertical test panel; a standard weight is suspended on the bottom of the portion of the supported tape. Measurement is given in minutes until failure and/or distance slipped. Failure can be forced by conducting this test in an oven that gradually and consistently rises in temperature. The temperature at which the tape fails is called the shear adhesion failure temperature (SAFT). Avery Dennison stus.averydennison.com 7

8 Adhesive Chemistries & Characteristics Avery Dennison reference guide to basic adhesive chemistries and summary of typical performance. Adhesive Chemstries Price Adhesion Low Surface Energy Bonding Tack Shear Resistance Humidity Resistance Solvent/Chemical Resistance UV Resistance Rubber Based Acrylic Based Modified Acrylic Based UHA Rubber Based UHA Acrylic Based Silicone XHA Based Low Medium-Low Medium Medium-High High Low (poor) High (good) Key Adhesive Application Factors The first step in selecting an Avery Dennison high-performance adhesive is to consider a number of factors, including: 1. What are the substrate materials to be bonded? Substrate composition Substrate texture Substrate condition 2. To what environmental factors will the final product be exposed? Adhesive application temperature during use UV exposure (direct vs. indirect) Solvent exposure Moisture exposure (humidity) Outdoor conditions and extreme weathering exposure 3. What are the performance requirements? Product life expectancy Existing specifications Product application/use Tape function 4. How will the tape be processed? Laminated (hot or cold) Die-cut Slit 5. What cost parameters must be considered to make this PSA application feasible? Target price 8 Avery Dennison stus.averydennison.com

9 Material Substrates Lamination Substrate: The substrate that will bond with the unwind adhesive during the converting process. Mounting Substrate: The substrate that will bond with the liner side adhesive. Surface Contamination Surface contamination prevents effective bonding. There are many types of surface contamination some are not visible to the eye, but can be identified analytically. Simply cleaning the surface (washing or flame treating) will ensure an effective bond. Adhesive Surface Contamination Substrate The surface may be contaminated if: The presence of loose material on the surface of the substrate is noticed Material feels slippery, greasy and/or slimy All surfaces tested appear to have the same poor bond and the adhesive feels non-tacky after being removed from the substrate Common contaminants include: Dust, anti-static agents, moisture, plasticizers and mold release agents Silicone (from other release liners), oils, anti-block coatings and powders Surface Texture The texture of a substrate can affect the adhesive bond strength. Textured materials do not allow 100 percent contact of the adhesive to the substrate (less contact + less bonding area = lower bond strength). Performance improvements to heavily textured materials can be achieved with proper product selection: Heavier adhesive mass allows for more flow into material Softer adhesives have better flow properties A more aggressive adhesive maximizes bond strength at contact areas A more flexible tape conforms to texture Woven Textile Open Cell Foam Very Rough Substrate Avery Dennison stus.averydennison.com 9

10 Surface Contour The contour of the substrate will influence both the adhesive selection and the product selection. For conformability around irregular angles, materials with higher flexibility are recommended. Regardless of the adhesive s strength, it is virtually impossible for an adhesive to overcome continued stress from a rigid material trying to return to its original form (memory). Consider a conformable tape, such as a transfer tape or a double coated tape with a flexible carrier (tissue or non-woven) Consider adding stress relief to a converted part (e.g. scores, perforations) PSA Stress on PSA Application : of the substrate and/or the adhesive when applied or laminated. General minimum temperature recommendations: 50 F for acrylics and 40 F for rubbers Exposure : that adhesive is exposed to during the normal service life of the finished product: 0 F to 400 F for acrylics and -10 F to 225 F for rubbers 10 Avery Dennison stus.averydennison.com

11 Surface Energy Surface energy of a substrate will affect the adhesive s ability to wet out or spread over the substrate. Low Surface Energy (LSE) materials resist adhesive wet out, creating bonding challenges. However, high surface energy materials allow excellent wet out and provide the best adhesion. For example, picture an unwaxed car when it rains. The water spreads out (or wets out) on the car creating puddles. In this case, the car s surface is displaying high surface energy. However, a waxed car will cause water to bead up because the car s surface is displaying LSE characteristics. Since pressure-sensitive adhesives bond well when they can wet out a surface, adhesives bond extremely well to high surface energy materials similar to water on an unwaxed car. LSE materials (similar to a waxed car) create bonding challenges because adhesives have difficulty wetting out the surface. Rubber based and modified acrylic adhesives typically offer better adhesion to LSE substrates (softer, better flow). Some materials will require corona treating, primers or top coating to promote better adhesion. High Surface Energy Medium Surface Energy Low Surface Energy Substrates Surface Energy Dynes/cm Copper 1103 Aluminum 840 Zinc 753 Tin 526 Lead 543 Substrates Surface Energy Dynes/cm Kapton 50 Phenolic 47 Nylon 46 Alkyd Enamel 45 Polyester 43 Epoxy Paint 43 Polyurethane 43 ABS 42 Polycarbonate 42 PVC 39 Noryl 38 Acrylic 38 Substrates Surface Energy Dynes/cm PVA 37 Polystyrene 36 Acetal 36 EVA 33 Polyethylene 31 Polypropylene 29 Tedlar 28 Teflon 18 Powder Coatings ** ** Broad range of surface energy. Noryl is a registered trademark of General Electric Company. Kapton, Tedlar, Teflon, and Nylon are registered trademarks of E.I. Du Pont De Nemours and Company. Avery Dennison stus.averydennison.com 11

12 Liners Avery Dennison offers paper and film release liners in a number of different constructions and weights to meet various process requirements. Paper Liners 53# SCK 3.2 mil Densified kraft offering consistent rotary die processing 60# SCK 3.4 mil Densified kraft suitable for die cutting 80# SCK 4.5 mil Heavier densified kraft suitable for die cutting Film Liners Clear Polyester 2.0, 3.0 mil High strength, excellent for die cutting and kiss cutting White Polyester 2.5, 5.0 mil High strength, excellent for die cutting and kiss cutting Polycoated Papers 58# Polycoated Kraft 4.2 mil Economical moisture stable layflat liner 84# Polycoated Kraft 6.0 mil Heavier moisture stable layflat 12 Point Board 12 mil Excellent layflat and offers assemblers part dispensing ease; excellent kiss and steel rule die cutting Liner Selection Chart Liner Type High Tensile Strength Humidity Resistance Rotary Die Cutting Kiss Cutting Film Paper 4 4 Polycoated Paper Best Practices for Applying PSA s Bonding surface must be clean, dry and free of all grease and oil contaminates PSA s require a minimum of psi to secure most bonds Minimum application temperature (>50 F/10 C) Heat lamination improves surface contact area and decreases wet out time PSA s will continue to wet out or build adhesion for up to 72 hours 12 Avery Dennison stus.averydennison.com

13 Rubber Based Adhesives - High Initial Adhesion - Quick Stick Properties - Cost Effective FT Designed for envelopes and continuous forms. FT 1159** Designed for applications requiring good quick stick and adhesion to low surface energy substrates and foams. 1.2 mils of a synthetic rubber based adhesive protected by a 2.2 mil white glassine 2.2 mils of a high tack rubber based adhesive protected by a 80# densified kraft Acrylic Based Adhesives - UV Resistance - Solvent and Chemical Resistance - Humidity Resistance - Improved Aging Performance - Moderate Price FT 1115** Designed for polyurethane foam bonding applications and offers plasticizer resistance. FT 1122 HLP FT 1125 HLP TRANSFER TAPE PRODUCTS Designed to meet adhesion and shear requirements for most long-term nameplate and decorative trim applications. Ideal for lamination to graphic overlay material Designed to meet adhesion and shear requirements for most long-term nameplate and decorative trim applications. Ideal for lamination to graphic overlay material. FT 1143** Designed for polyurethane foam bonding applications and offers plasticizer resistance. FT Designed for the permanent mounting of foil, metal and plastic nameplates and decorative trim. 4.7 mils of an acrylic adhesive protected by a 80# densified kraft 2.1 mils of an acrylic adhesive protected by a 84# polycoated 4.5 mils of an acrylic adhesive protected by a 84# polycoated 3.1 mils of an acrylic adhesive protected by a 80# densified kraft 2.0 mils of an acrylic adhesive protected by a 80# densified kraft * Spool Wound ** Produced in full adhesive width only. Due to aggressive adhesion properties, we recommend uncoated edges for slitting. An upcharge will be added based on complexity. Avery Dennison stus.averydennison.com / F 1/ * F F F F F F TRANSFER TAPE PRODUCTS DOUBLE COATED PRODUCTS FOAM PRODUCTS FOIL PRODUCTS SPECIALTY PRODUCTS

14 TRANSFER TAPE PRODUCTS DOUBLE COATED PRODUCTS FOAM PRODUCTS Acrylic Based Adhesives - UV Resistance - Solvent and Chemical Resistance - Humidity Resistance - Improved Aging Performance - Moderate Price HPA 1902 HPA 1902 PET HPA 1905 HPA 1905 PET TRANSFER TAPE PRODUCTS Designed for use on nameplates, membrane touch switch assemblies and graphic overlays. Applications requiring good "holding power" under stress and load Designed for use on nameplates, membrane touch switch assemblies and graphic overlays. Applications requiring good "holding power" under stress and load Designed for use on nameplates, membrane touch switch assemblies and graphic overlays. Applications requiring good "holding power" under stress and load Designed for use on nameplates, membrane touch switch assemblies and graphic overlays. Applications requiring good "holding power" under stress and load. 2.5 mils of an acrylic adhesive protected by a 58# natural polycoated kraft 2.5 mils of an acrylic adhesive protected by a 2.0 mil PET 5.0 mils of an acrylic adhesive protected by a 58# natural polycoated kraft 5.0 mils of an acrylic adhesive protected by a 2.0 mil PET F F F F SPECIALTY PRODUCTS FOIL PRODUCTS 14 Avery Dennison stus.averydennison.com ** Produced in full adhesive width only. Due to aggressive adhesion properties, we recommend uncoated edges for slitting. An upcharge will be added based on complexity.

15 Modified Acrylic Based Adhesives - Enhanced Tack and Adhesion - Bonds Well to Low Surface Energy Substrates - Moderate/Premium Price FT 1123** Designed for applications requiring a modified acrylic adhesive for laminating to polyurethane foams where high initial tack and adhesion are required. FT 1126** Designed for applications requiring a modified acrylic adhesive for laminating to polyurethane foams where high initial tack and adhesion are required. FT PT BD FT 1147** Low VOC FT 1149** Low VOC TRANSFER TAPE PRODUCTS Designed for applications requiring a modified acrylic adhesive for laminating to polyurethane foams where high initial tack and adhesion are required Designed for applications requiring high adhesion to low surface energy materials and bonding to foams and fabrics where low-fogging is required. Does not contain any of the 13 chemicals restricted by the Japanese Ministry of Health, Labor and Welfare Designed for applications requiring high adhesion to low surface energy materials and bonding to foams and fabrics where low-fogging is required. Does not contain any of the 13 chemicals restricted by the Japanese Ministry of Health, Labor and Welfare. FT Designed for applications requiring an aggressive fiber-filled acrylic adhesive offering excellent die-cutting and slitting properties. 3.0 mils of an acrylic adhesive protected by a 80# densified kraft 4.9 mils of an acrylic adhesive protected by a 80# densified kraft 4.9 mils of an acrylic adhesive protected by a 12 point board 2.9 mils of an acrylic adhesive protected by a 84# natural polycoated kraft 4.5 mils of an acrylic adhesive protected by a 84# polycoated 5.2 mils of an acrylic adhesive protected by a 80# densified kraft F F F F F F TRANSFER TAPE PRODUCTS DOUBLE COATED PRODUCTS FOAM PRODUCTS FOIL PRODUCTS SPECIALTY PRODUCTS ** Produced in full adhesive width only. Due to aggressive adhesion properties, we recommend uncoated edges for slitting. An upcharge will be added based on complexity. Avery Dennison stus.averydennison.com 15

16 FOIL PRODUCTS FOAM PRODUCTS DOUBLE COATED PRODUCTS TRANSFER TAPE PRODUCTS Modified Acrylic Based Adhesives - Enhanced Tack and Adhesion - Bonds Well to Low Surface Energy Substrates - Moderate/Premium Price FT 1906 FR FT 0720 DL-C Clear FT 0720 DL-W White Designed for applications requiring high flame retardant properties to meet the most stringent flammability requirements Specially developed for buried graphic label applications Specially developed for buried graphic label applications. 2.0 mils of a modified fire retardant acrylic adhesive protected by a 60# calendared kraft Double-linered transfer tape with 1.3 mils of an acrylic adhesive protected by a 50# densified kraft liner and a 1.0 mil PET Double-linered transfer tape with 1.1 mils of a white opaque acrylic adhesive protected by a 50# densified kraft liner and a 1.0 mil PET F F F UHA Acrylic Based Adhesives (Ultra High Adhesion) - Patented Avery Dennison Adhesive Technology - Strong Resistance to Solvents/Chemicals - Strong Resistance to Ultraviolet Light - High Resistance - Moderate/Premium Price UHA 1185 HLP TRANSFER TAPE PRODUCTS Designed for applications requiring excellent high temperature performance. The adhesive offers excellent resistance to solvents such as gasoline, motor oil and antifreeze. Provides excellent resistance to UV light exposure. 4.6 mils of an ultra high adhesion adhesive protected by a 84# polycoated F SPECIALTY PRODUCTS 16 Avery Dennison stus.averydennison.com ** Produced in full adhesive width only. Due to aggressive adhesion properties, we recommend uncoated edges for slitting. An upcharge will be added based on complexity.

17 UHA Rubber Based Adhesives (Ultra High Adhesion) - Patented Avery Dennison Adhesive Technology - Exceptional Quick Stick - Exceptional Adhesion to Low Surface Energy Substrates - Moderate/Premium Price UHA Designed for applications requiring high adhesion, tack and shear to low surface energy substrates. This product provides excellent adhesion to textured materials. UHA Designed for applications requiring high adhesion, tack and shear to low surface energy substrates. This product provides excellent adhesion to textured materials. UHA Designed for applications requiring high adhesion, tack and shear to low surface energy substrates. This product provides excellent adhesion to textured materials. UHA Designed for applications requiring high adhesion, tack and shear to low surface energy substrates. This product provides excellent adhesion to textured materials mils of an ultra high adhesion adhesive protected by a 80# densified kraft 2.0 mils of an ultra high adhesion adhesive protected by a 80# densified kraft 5.0 mils of an ultra high adhesion adhesive protected by a 80# densified kraft 8.0 mils of an ultra high adhesion adhesive protected by a 80# densified kraft F F F F Silicone Adhesives - Outstanding Chemical Resistance - Excellent and Humidity Resistance - High Shear Properties - Inert Technology - Premium Price FT 3012 TRANSFER TAPE PRODUCTS Designed for applications where heat and environmental resistance is important. Offers excellent die cutting and slitting properties. Double-linered transfer tape with 2.3 mils of a silicone based adhesive protected by a 2.0 mil PET liner and 2.5 mil white PET F TRANSFER TAPE PRODUCTS DOUBLE COATED PRODUCTS FOAM PRODUCTS FOIL PRODUCTS SPECIALTY PRODUCTS ** Produced in full adhesive width only. Due to aggressive adhesion properties, we recommend uncoated edges for slitting. An upcharge will be added based on complexity. Avery Dennison stus.averydennison.com 17

18 SPECIALTY PRODUCTS FOIL PRODUCTS FOAM PRODUCTS DOUBLE COATED PRODUCTS TRANSFER TAPE PRODUCTS Rubber Based Adhesives - High Initial Adhesion - Quick Stick Properties - Cost Effective FT Designed for applications requiring an aggressive, high shear adhesive for use on a wide variety of substrates FT Designed for bonding to foamed rubbers and plastics used in industrial gaskets and weather seals. Good compatibility with EPDM/Rubbers. FT Economical general purpose product. Ideal for foam bonding. FT Designed for applications requiring an aggressive, high shear adhesive for use on a wide variety of substrates. FT Designed for applications requiring an aggressive, high shear adhesive for use on a wide variety of substrates. FT PT BD FT 8327 FT PT BD Double Coated Products Designed for bonding to a wide variety of polyurethane and polyethylene foams used in gasketing, sealing and sound damping applications Designed for bonding to a wide variety of polyurethane and polyethylene foams used in gasketing, sealing and sound damping applications Designed for bonding to a wide variety of polyurethane and polyethylene foams used in gasketing, sealing and sound damping applications. 1.0 mil PP with 2.3 mils of a rubber based adhesive on both sides protected by a 60# densified kraft Double coated PET scrim with 2x 3.15 mils of a synthetic rubber adhesive protected by a havana glassine 0.5 mil PET with 1.7 mils of a unwind side and 1.4 mils of a liner side protected by a 60# densified kraft 0.5 mil PET with 1.2 mils of a rubber based adhesive on both sides protected by a 60# densified kraft 1.0 mil PET with 2.1 mils of a unwind side and 3.2 mils of a liner side protected by a 100# densified kraft 0.5 mil PET with 2.1 mils of a unwind side and 1.8 mils of a liner side protected by a 146# natural poly-coated kraft 0.5 mil PET with 2.0 mils of a unwind side and 1.6 mils of a liner side protected by an easy release 76# densified kraft liner 0.5 mil PET with 2.0 mils of a unwind side and 1.6 mils of a liner side protected by an easy release 12 point board F F F F F F F F 18 Avery Dennison stus.averydennison.com

19 Rubber Based Adhesives - High Initial Adhesion - Quick Stick Properties - Cost Effective FT Designed to offer temporary removability on a wide variety of substrates. FT Designed for applications requiring an aggressive, high shear adhesive for use on a wide variety of substrates FT Designed for use on bonding point-of-purchase display information to shelving materials. FT 9325 PG FT Designed with a finger lift edge for box closure applications Designed for applications requiring an aggressive, high shear adhesive for use on a wide variety of substrates FT B Designed to provide an economical product for general purpose bonding, good low surface energy properties. FT B 12 PT BD Double Coated Products Designed to provide an economical product for general purpose bonding, good low surface energy properties. FT C Designed as a general purpose tissue tape providing high conformability and high adhesion to a variety of surfaces, including low surface energy substrates. 0.5 mil PET with 1.9 mils of a unwind side and 0.8 mils of a liner side protected by a 80# densified kraft 0.5 mil PET with 2.4 mils of a rubber based adhesive on both sides protected by a 60# densified kraft 0.5 mil PET with 1.2 mils of a unwind side and 1.0 mils of a liner side protected by a 60# densified kraft 0.5 mil PET with 2.4 mils of a rubber based adhesive on the unwind side with 3.0 mils of a rubber based adhesive on the liner side protected by a 52# densified kraft 0.5 mil PET with 2.0 mils of a unwind side with 2.4 mils of a liner side protected by a 2.0 mil PET 0.5 mil PET with 1.7 mils of a unwind side and 1.5 mils of a liner side protected by a 80# densified kraft 0.5 mil PET with 1.7 mils of a unwind side and 1.5 mils of a liner side protected by a 12 point board 10# tissue with 1.8 mils of a unwind side and 1.6 mils of a liner side protected by a 60# densified kraft F F F /2" F F F F F TRANSFER TAPE PRODUCTS DOUBLE COATED PRODUCTS FOAM PRODUCTS FOIL PRODUCTS SPECIALTY PRODUCTS Avery Dennison stus.averydennison.com 19

20 SPECIALTY PRODUCTS FOIL PRODUCTS FOAM PRODUCTS DOUBLE COATED PRODUCTS TRANSFER TAPE PRODUCTS Double Coated Products Rubber Based Adhesives - High Initial Adhesion - Quick Stick Properties - Cost Effective FT D Designed for applications where high adhesion and tack are required on a variety of substrates, including low surface energy substrates. FT E Ideal for applications requiring lamination to polyurethane foams and temporary removability from a variety of substrates. FT EZ Designed for applications requiring lamination to polyurethane foams and temporary removability from a variety of substrates. Offers easier liner removal than FT E mil PET with 2.5 mils of a rubber based adhesive on both sides protected by a 60# densified kraft 0.5 mil PET with 1.4 mils of a rubber based adhesive on both sides protected by a 80# densified kraft 0.5 mil PET with 1.5 mils of a rubber based adhesive on both sides protected by a 80# densified kraft Acrylic Based Adhesives - UV Resistance - Solvent and Chemical Resistance - Humidity Resistance - Improved Aging Performance - Moderate Price FT 702P Designed for bonding to high surface energy plastics and metal substrates. FT Designed for a variety of applications requiring initial quick stick. Excellent for foam bonding applications and used in electronic and packaging applications. FT A Designed for bonding to high surface energy plastics, metals and foam substrates where resistance to plasticizers is required. 0.5 mil PET with 2.0 mils of an acrylic adhesive on the unwind side and 2.9 mils of an acrylic adhesive on the liner side protected by a 63# polycoated 0.5 mil PET with 1.8 mils of a high-tack acrylic adhesive on the unwind side and 1.8 mils of a high-tack acrylic adhesive on the liner side protected by a 76# densified kraft 0.5 mil PET with 2.0 mils of an acrylic adhesive on both sides protected by a 60# densified kraft F F F F F F 20 Avery Dennison stus.averydennison.com

21 Modified Acrylic Based Adhesives - Enhanced Tack and Adhesion - Bonds Well to Low Surface Energy Substrates - Moderate/Premium Price FT Designed to bond polyurethane foams, sponge rubber, metal and plastic parts where high adhesion is required. FT General purpose foam bonding, gaskets, sound deadening and insulation materials. Typical end uses involving critical temperature performance, interior automotive trim, PU foams, felts, fabrics and fibers. FT Designed for use on applications that require excellent adhesion to foam or low surface energy substrates along with good dimensional stability. FT 8260 Low VOC Double Coated Products Designed for applications requiring high adhesion to low surface energy materials and bonding to foams and fabrics where low-fogging is required. Does not contain any of the 13 chemicals restricted by the Japanese Ministry of Health, Labor and Welfare. FT Designed for use in applications requiring lamination to polyurethane foams and low surface energy materials. FT Economical tape designed for use in applications requiring lamination to polyurethane foams and smooth low surface energy materials. 0.5 mil PET with 2.1 mils of an acrylic adhesive on both sides protected by a 60# densified kraft PET scrim reinforced transfer tape with 3.15 mils of an emulsioncoated modified acrylic adhesive protected by a havana glassine 0.3 oz non-woven with 3.2 mils of an acrylic adhesive on the unwind side and 2.1 mils of an acrylic adhesive on the liner side protected by a 60# densified kraft 3.0 mil SB non-woven with 2.0 mils of an acrylic adhesive on the unwind side and 2.0 mils of an acrylic adhesive on the liner side protected by a 83# natural poly-coated kraft 0.5 mil PET with 2.4 mils of an acrylic adhesive on the unwind side and 1.8 mils of an acrylic adhesive on the liner side protected by a 80# densified kraft 0.5 mil PET with 1.2 mils of a high tack acrylic adhesive on the unwind side and 1.0 mils of a high tack acrylic adhesive on the liner side protected by a 60# densified kraft F F F F F F TRANSFER TAPE PRODUCTS DOUBLE COATED PRODUCTS FOAM PRODUCTS FOIL PRODUCTS SPECIALTY PRODUCTS Avery Dennison stus.averydennison.com 21

22 SPECIALTY PRODUCTS FOIL PRODUCTS FOAM PRODUCTS DOUBLE COATED PRODUCTS TRANSFER TAPE PRODUCTS Modified Acrylic Based Adhesives - Enhanced Tack and Adhesion - Bonds Well to Low Surface Energy Substrates - Moderate/Premium Price FT Designed for bonding to a wide variety of foams. This product offers excellent environmental and chemical resistance. FT 9361 Low VOC Designed for applications requiring high adhesion to low surface energy materials and bonding to foams and fabrics where low-fogging is required. Does not contain any of the 13 chemicals restricted by the Japanese Ministry of Health, Labor and Welfare. 0.3 oz non-woven with 1.3 mils of a high performance acrylic adhesive on the unwind side and 1.3 mils of an acrylic adhesive on the liner side protected by a 80# densified kraft 0.5 mil PET with 2.0 mils of an acrylic adhesive on the unwind side and 2.0 mils of an acrylic adhesive on the liner side protected by a 83# natural polycoated kraft Rubber/Acrylic Adhesives - Differential Adhesive - For Bonding to Various Substrates - Moderate Price FT The removable adhesive can be removed with no ghosting up to one year after application from most solid substrates. FT Designed for use where temporary mounting to substrates is desired. FT A tape designed with an acrylic adhesive suitable for polyurethane foam bonding and a general purpose rubber adhesive for a wide variety of substrates. FT PT BD Double Coated Products A tape designed with an acrylic adhesive suitable for polyurethane foam bonding and a general purpose rubber adhesive for a wide variety of substrates. 0.5 mil PET with 1.75 mils of a permanent adhesive on the unwind side and 0.6 mils of a removable acrylic adhesive on the liner side protected by a white glassine 0.5 mil PET with 2.1 mils of a permanent rubber adhesive on the unwind side and 0.8 mils of a removable acrylic adhesive on the liner side protected by a 60# densified kraft 0.5 mil PET with 1.3 mils of a high performance acrylic on the unwind side and 1.5 mils of an aggressive rubber based adhesive on the liner side protected by a 80# densified kraft 0.5 mil PET with 1.3 mils of a high performance acrylic on the unwind side and 1.5 mils of an aggressive rubber based adhesive on the liner side protected by a 12 point board F F F F F F 22 Avery Dennison stus.averydennison.com

23 UHA Acrylic Based Adhesives (Ultra High Adhesion) - Patented Avery Dennison Adhesive Technology - Strong Resistance to Solvents/Chemicals - Strong Resistance to Ultraviolet Light - High Resistance - Moderate/Premium Price UHA Double Coated Products Excellent adhesion to open cell polyurethane foams. Ideal for applications requiring temperature resistance and good conformability. 10# tissue with 3.3 mils of an acrylic adhesive on the unwind side and 2.4 mils of an ultra high adhesion acrylic adhesive on the liner side protected by a 100# densified kraft F UHA Rubber Based Adhesives (Ultra High Adhesion) - Patented Avery Dennison Adhesive Technology - Exceptional Quick Stick - Exceptional Adhesion to Low Surface Energy Substrates - Moderate/Premium Price UHA Designed for bonding automotive trim carpeting. 0.3 oz non-woven with 2.9 mils of an acrylic adhesive on the unwind side and 5.2 mils of an ultra high adhesion rubber adhesive on the liner side protected by a 80# densified kraft F TRANSFER TAPE PRODUCTS DOUBLE COATED PRODUCTS FOAM PRODUCTS FOIL PRODUCTS SPECIALTY PRODUCTS Avery Dennison stus.averydennison.com 23

24 FOIL PRODUCTS FOAM PRODUCTS DOUBLE COATED PRODUCTS TRANSFER TAPE PRODUCTS UHA Rubber Based Adhesives (Ultra High Adhesion) - Patented Avery Dennison Adhesive Technology - Exceptional Quick Stick - Exceptional Adhesion to Low Energy Surfaces - Moderate/Premium Price UHA Acrylic Based Adhesives (Ultra High Adhesion) - Patented Avery Dennison Adhesive Technology - Strong Resistance to Solvents/Chemicals - Strong Resistance to Ultraviolet - High Resistance - Moderate/Premium Price UHA Excellent adhesion to open cell polyurethane foams. Ideal for applications requiring temperature resistance and good conformability UHA Excellent adhesion to open cell polyurethane foams. Ideal for applications requiring temperature resistance. 0.3 oz non-woven with 2.0 mils of an ultra high adhesion acrylic adhesive on the unwind side and 2.0 mils of an ultra high adhesion rubber adhesive on the liner side protected by a 80# densified kraft 0.5 mil PET with 2.0 mils of an ultra high adhesion acrylic adhesive on the unwind side and 2.0 mils of an ultra high adhesion rubber adhesive on the liner side protected by a 80# densified kraft F F Silicone Adhesives - Outstanding Chemical Resistance - Excellent and Humidity Resistance - High Shear Properties - Inert Technology - Premium Price FT 9302M Double Coated Products Designed for applications requiring good adhesion to low surface energy and textured materials. 2.0 PET with 2.7 mils of a silicone adhesive on the liner side with 2.1 mils of a modified acrylic on the unwind side protected by a 76# densified kraft F SPECIALTY PRODUCTS 24 Avery Dennison stus.averydennison.com

25 Double Coated Polyethylene Foam Products Rubber Based Adhesives - High Initial Adhesion - Quick Stick Properties - Cost Effective FM Conformable construction designed for gapfilling and cushioning applications. FM Conformable construction designed for gap-filling and cushioning applications. Double coated 1/16, 3# white foam with 2.3 mils of a rubber based adhesive on both sides protected by a 60# densified kraft Double coated 1/32, 5# white foam with 2.3 mils of a rubber based adhesive on both sides protected by a 60# densified kraft Acrylic Based Adhesives - UV Resistance - Solvent and Chemical Resistance - Humidity Resistance - Improved Aging Performance - Moderate Price FM Designed for bonding automotive mirrors to mirror housings where good adhesion, heat resistance, environmental resistance, gap-filling and shatter resistance are important. Double coated 1/32, 6# black foam with 1.8 mils of an acrylic adhesive on both sides protected by a 60# densified kraft F F Modified Acrylic Based Adhesives - Enhanced Tack and Adhesion - Bonds Well to Low Surface Energy Substrates - Moderate/Premium Price FM Conformable construction designed for gapfilling and cushioning applications that require environmental resistance. FM Conformable construction designed for gap-filling and cushioning applications that require environmental resistance. Double coated 1/16, 3# white foam with 2.1 mils of an acrylic adhesive on both sides protected by a 60# densified kraft Double coated 1/32, 5# white foam with 2.4 mils of an acrylic adhesive on both sides protected by a 60# densified kraft F F F TRANSFER TAPE PRODUCTS DOUBLE COATED PRODUCTS FOAM PRODUCTS FOIL PRODUCTS SPECIALTY PRODUCTS Avery Dennison stus.averydennison.com 25

26 TRANSFER TAPE PRODUCTS DOUBLE COATED PRODUCTS XHA Based Adhesives (Xtreme High Adhesion) - Patented Avery Dennison Adhesive Technology - High Adhesion to Low Surface Energy Plastics - Strong Resistance to Ultraviolet Light - Premium Price Series Typical Applications Product Construction XHA 9700 Series DOUBLE COATED Elastomeric Foam Products XHA 9700 Series delivers quick initial bond and achieves superior adhesion to a multitude of low surface energy plastics. An exceptionally durable technology, XHA 9700 Series is engineered for the most demanding industrial applications. Product Spec # XHA F XHA F XHA F XHA F XHA F XHA 9700 Series is a patented bonding tape with adhesive skins on both sides of a 100 percent black, flexible elastomeric foam core. XHA 9700 Series is available in 25, 32, 45, 60 and 90 mils. SPECIALTY PRODUCTS FOIL PRODUCTS FOAM PRODUCTS 26 Avery Dennison stus.averydennison.com

27 Foil Products Rubber Based Adhesives - High Initial Adhesion - Quick Stick Properties - Cost Effective FT Designed for moisture barrier and heat shield applications. FL Designed for taping joints and seams against moisture and vapor on foil jacketing facings. FL Designed for die-cut shapes, shielding, moisture and vapor barrier sealing components or lamination to insulation materials. Single coated 5.0 mil foil with 1.2 mils of a rubber based adhesive protected by a 60# densified kraft Single coated 2.0 mil foil with 2.0 mils of a rubber based adhesive protected by a 40# densified kraft Single coated 1.5 mil foil with 1.5 mils of a rubber based adhesive protected by a 40# densified kraft Acrylic Based Adhesives - UV Resistance - Solvent and Chemical Resistance - Humidity Resistance - Improved Aging Performance - Moderate Price FT Designed for moisture barrier and heat shield applications that require environmental resistance. FL Designed for die-cut shapes, shielding, moisture and vapor barrier sealing components or lamination to insulation materials that require environmental resistance. Single coated 5.0 mil foil with 4.7 mils of an acrylic adhesive protected by a 60# densified kraft Single coated 2.0 mil foil with 2.2 mils of an acrylic adhesive protected by a 40# densified kraft F F F F F UHA Acrylic Based Adhesives (Ultra High Adhesion) - Patented Avery Dennison Adhesive Technology - Strong Resistance to Solvents/Chemicals - Strong Resistance to Ultraviolet Light - High Resistance - Moderate/Premium Price UHA Designed for reducing resonate noise, vibration and stress fatigue in structures as a constrained layer damper (CLD). Used in industrial, transportation, electronic and appliance markets providing resistance to heat, solvents and humidity. Single coated 10.0 mil foil with 4.8 mils of an ultra high adhesion acrylic adhesive protected by a 84# polycoated F TRANSFER TAPE PRODUCTS DOUBLE COATED PRODUCTS FOAM PRODUCTS FOIL PRODUCTS SPECIALTY PRODUCTS Avery Dennison stus.averydennison.com 27

28 TRANSFER TAPE PRODUCTS DOUBLE COATED PRODUCTS FOAM PRODUCTS Ultra High Molecular Weight PE Flock Specialty Products Modified Acrylic Based Adhesives - Enhanced Tack and Adhesion - Bonds Well to Low Surface Energy Substrates - Moderate/Premium Price UHMW 0433 UHMW An abrasion resistant tape designed for low coefficient of friction applications. Ideal for anti-squeak and rattle applications An abrasion resistant tape designed for low coefficient of friction applications. Ideal for anti-squeak and rattle applications. FT 0900 B Designed for sound deadening and antisqueak applications. FT 0900 B PET Designed for sound deadening and anti-squeak applications. The PET liner acts as a processing aid for improved die cutting. 3.0 mil UHMW-PE with 2.0 mils of a high tack modified acrylic adhesive protected by a 80# densified kraft 5.0 mil UHMW-PE with 2.0 mils of a high tack modified acrylic adhesive protected by a 80# densified kraft Black flock with 4.5 mils of a modified acrylic adhesive protected by a 84# polycoated Black flock with 4.5 mils of a modified acrylic adhesive protected by a 2.0 mil PET F F F F SPECIALTY PRODUCTS FOIL PRODUCTS 28 Avery Dennison stus.averydennison.com

29 Single Coated Specialty Products Acrylic Based Adhesives - UV Resistance - Solvent and Chemical Resistance - Humidity Resistance - Improved Aging Performance - Moderate Price FT A transparent protective film allows perfect visual inspection. Designed as an application tape for emblem and badge mounting. The tape can be cleanly removed from plastics, wood, painted steel and glass surfaces even after long term use. Single coated 4.0 mil clear PP film coated with 1.0 mils of a long term removable acrylic adhesive protected by a clay coated kraft F TRANSFER TAPE PRODUCTS DOUBLE COATED PRODUCTS FOAM PRODUCTS FOIL PRODUCTS SPECIALTY PRODUCTS Avery Dennison stus.averydennison.com 29

30 Additional Services Tapes Requiring Uncoated Slit Edges Please refer to the guidelines below when specifying a striped adhesive coating for transfer and double coated tapes. Minimum order requirement is 4-9 MMSI Tooling charge will apply All adhesive and non-adhesive dimensions should be listed as fractions (not decimals) Slit roll tolerance is +1/32 inch Adhesive tolerance +1/16 inch A diagram of the striped adhesive system, with slit roll dimensions, must be supplied with initial order Minimum adhesive width of 1 inch and a minimum uncoated area of 1/8 inch Uncoated Adhesive Uncoated Slitter Point Adhesive Slit Roll Contact your sales representative for assistance when ordering striped adhesive tape. A surcharge will be added to the price based on the complexity of the request. Slitting Services The standard slitting service for the master roll is 4 inches or wider without up charges. Slit roll sizes narrower than 4 inches may be feasible. However, these requests require review and approval by the Avery Dennison Finishing department. Slitting dimensions will be produced in 1/32-inch increments. Additional equipment, set up and changeovers are typically involved in producing narrow slit rolls. All slitting between 2 and 4 inches will result in an up charge All slitting requests for less than 2 inches will be evaluated on an individual basis Rewinding Services for Short Rolls Tape products may be ordered in roll lengths less than standard lengths, but greater than 150 feet. length for shorter rolls must equal the specified master roll length. For example, 5 rolls at 54 inches x 150 feet may be ordered in place of a master roll, 54 inches x 750 feet or 3 rolls at 54 inches x 180 feet may be ordered in place of a master roll, 54 inches x 540 feet. The rewind fee will be applied. Printing Services Custom printing services are available upon request. A surcharge will be added to the price of the product based on the complexity of the printing. A one-time tooling fee for a new print cylinder will be applied on all new print designs. 30 Avery Dennison stus.averydennison.com

31 Packaging Standards Any additional packaging required beyond the described standards is subject to review or approval and an up charge. Standard Cradle Packed Pallet (all sizes) Stretch Wrap Two Bands Two Boards Corrugated Cradles End Plates Core Plugs Slip Sheet Deck Pad Pallet Standard Pancake (19 inch slit width to 60 inch) Wrap Banding Topper Core Plugs Die Cut Pad Slip Sheet Material Deck Pad Pallet Avery Dennison stus.averydennison.com 31

32 Standard Pancake Stacked Pallet (slit width less than 19 inch) Wrap Die Cut Pad every 9 to 12 Two Bands Topper Core Plugs Die Cut Pads Slip Sheets Material Slit Roll Labels Double Plug/Stakes Deck Pad Pallet 32 Avery Dennison stus.averydennison.com

33 Avery Claims for Prepaid Freight Avery Claims Freight & Transit Claims Process As a continuation of our commitment to quality, we have developed Avery Claims as an innovative extension to our unique delivery services. In addition, Avery Dennison has exceeded National Motor Freight Classification. Through more than 50 years of experience, we have discovered a significant amount of losses and damages occur from carrier mishandling. With your input, we will assume responsibility for filing loss/damage claims with our program carriers and issue credit to your account. When working with Avery Claims, you can expect a timely response by calling our 24-hour toll-free support line at We are committed to providing a timely resolution, and your account will be credited within 5 business days. With Avery Claims, Avery Dennison targets your service needs today to improve your tomorrow. How Avery Claims Work The following information details the Avery Dennison claims process. Step 1: Customer discovers damages and calls immediately. Step 2: Avery Dennison advises whether the customer is to accept/refuse delivery based on the condition of shipment. Not accepting a shipment of goods can have adverse consequences. If a shipment is refused upon delivery and investigation proves only part of the material was damaged, losses could be substantial. Step 3: Customer must note the damages on the freight bill before signing, use salvageable material and report material losses to Avery Dennison. Customers are required to keep the damaged material for inspection. Step 4: Avery Dennison contacts the carrier for an inspection of material within 72 hours. Step 5: Avery Dennison prepares claim and submits to carrier. Claims are required to be a minimum of $100. Step 6: If the material has been signed for and kept for inspection, Avery Dennison issues customer credit within 5 business days. Step 7: Avery Dennison works with the carrier to resolve the claim. Avery Dennison 24-hour support line: Avery Dennison stus.averydennison.com 33

34 Notes 34 Avery Dennison stus.averydennison.com

35 1. PRICE AND PAYMENT: All prices, unless stated otherwise herein, are F.O.B. shipping point and are exclusive of any present or future federal, state, local or other taxes applicable to the sale of products listed herein. Any such taxes shall be added to the price and paid by PURCHASER unless PURCHASER provides Avery International Corporation (AVERY DENNISON) with a valid exemption certificate acceptable to AVERY DENNISON and the appropriate taxing authorities. All prices are subject to change without prior notice; however, prices shall be those contained in the appropriate AVERY DENNISON Price list covering the products ordered and in effect on the Ship Date noted on the face of AVERY DENNISON s Sales Order. Orders calling for future delivery shall be billed at prices in effect on the shipping date. Shipments which are +/- 10% of the actual quantity ordered shall constitute filling the order; and PURCHASER shall be billed only for the quantity actually shipped plus, if applicable, trim loss. The net amount of invoice shall be payable in full within thirty days following the date of invoice. A one percent discount is available if payment is received within ten days of date of invoice. Amounts not paid within thirty days of date of invoice will be subject to a late payment charge of 1.0% per month on the unpaid balance to be included on each month s invoice until paid. The imposition of such charge is not intended to infer and consent, acquiescence or other agreement, expressed or implied, on the part of AVERY DENNISON to forbear or otherwise defer collection of such amounts when due. To the contrary, AVERY DENNISON expects payment on or before the due date of each invoice and intends to take all necessary and feasible action to enforce prompt payment. PURCHASER confirms acknowledges and agrees that it would be expensive to attempt to determine the actual damage sustained by AVERY DENNISON as the result of the default payment of any individual account and that the charge of 1.0% per month referred to above represents a reasonable endeavor to fix AVERY DENNISON s minimum probable loss resulting from delinquent payment, that such charge bears a reasonable relation to such loss and that surcharge is reasonable in amount. It is expressly intended by AVERY DENNISON and PURCHASER that this provision for late payment charges shall constitute a valid, binding and enforceable agreement for the payment of liquidated damages pursuant to Section 1671 (b) of the California Civil Code and Section 2718 (1) of the California Commercial Code. If in AVERY DENNISON S opinion PURCHASER s financial condition does not justify continuance of production or shipment on the terms of payment specified, AVERY DENNISON may require payments in advance. Failure of PURCHASER to pay and AVERY DENNISON invoice by its due date makes all subsequent invoices immediately due and payable irrespective of terms and AVERY DENNISON may withhold subsequent deliveries until the full account is settled. 2. ACCEPTANCE: An order once placed with and accepted by AVERY DENNISON (all orders are subject to acceptance by AVERY DENNISON s home office) may be cancelled only with AVERY DENNISON s consent and upon terms that will indemnify AVERY DENNISON against loss. 3. TITLE AND RISK OF LOSS: Title and risk of loss to all products purchased shall pass to PURCHASER upon delivery by AVERY DENNISON to a common carrier, regardless of the freight terms stated or method of payment of transportation charges. 4. SHIPMENT AND TRANSPORTATION CHARGES: AVERY DENNISON reserves the right to specify routing of shipments. AVERY DENNISON shall attempt to ship within the time specified in AVERY DENNISON s Sales Order, if indicated and if not then within a reasonable time; and PURCHASER acknowledges that no claim may be made for delays in shipment where PURCHASER accepts the products. Unless specified in AVERY DENNISON s Sales Order, freight charges shall be prepaid and billed. 5. COMPLIANCE: AVERY DENNISON products are manufactured in compliance with all applicable requirements of the Fair Labor Standards Act, as amended. Except as otherwise agreed in writing normal tolerances in specifications shall not be cause to reject products. 6. RETURNS: Products sold by AVERY DENNISON are returnable only in accordance with the warranty provisions hereof. Before returning any product, PURCHASER must obtain AVERY DENNISON s written material return authorization and instructions. 7. LIMITED WARRANTY: All statements, technical information and recommendations concerning products sold or samples provided by AVERY DENNISON are based upon tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold and samples of products provided with the understanding that PURCHASER has independently determined the suitability of such products for its purposes. AVERY DENNISON warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year* after the initial date of shipment, AVERY DENNISON shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with AVERY DENNISON s standards, correct such defects by suitable repair or replacement without charge at AVERY DENNISON s plant or at the location of the products (at AVERY DENNISON s election); provided, however, if AVERY DENNISON determines that repair or replacement is not commercially practical, AVERY DENNISON shall not commercially practical, AVERY DENNISON shall issue a credit in favor of PURCHASER in an amount not to exceed the purchase price of the products. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE AND/OR NON-INFRINGEMENT. NO REPRESENTATIVE OR AGENT OF AVERY DENNISON IS AUTHORIZED TO GIVE ANY GUARANTEE OR WARRANTY OR MAKE ANY REPRESENTATION CONTRARY TO THE ABOVE. NO WAIVER, ALTERATION, ADDITIONS OR MODIFICATIONS OF THE FOREGOING CONDITIONS SHALL BE VALID UNLESS MADE IN WRITING AND MANUALLY SIGNED BY AN OFFICER OF AVERY DENNISON. *Or the time period stated on the specific product specification sheet, if any, and if not then on the specific information literature in effect at time of shipment. 8. LIMITATION OF LIABILITY: In no event shall AVERY DENNISON be liable for any incidental or consequential damages, including but not limited to, loss of profit, loss of use or production or loss of capital. The remedies of PURCHASER set forth herein are exclusive and the total liability of AVERY DENNISON with respect to any contract, or anything done in connection therewith such as the performance or breach hereof, or from the manufacture, sale, delivery, resale, installation or use of any products whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise shall not exceed the purchase price of the products upon which liability is based. 9. ASSIGNMENT: Any assignment of this agreement or of any rights hereunder or hypothecation thereof in any manner, in whole or in part, without the prior written consent of AVERY DENNISON shall be void. 10. NON-WAIVER: Failure by AVERY DENNISON to insist upon strict performance of any of the terms or conditions hereof, failure or delay to exercise any rights or remedies provided herein or by law or to properly notify PURCHASER in the event of breach, or the acceptance of payment for any products hereunder, shall not be deemed a waiver of any right of AVERY DENNISON to insist upon strict performance hereof or any of its rights or remedies or as to any prior to subsequent default hereunder, nor shall any termination of this agreement operate as a waiver of any of the terms hereof. 11. FORCE MAJEURE: AVERY DENNISON shall not be liable for any loss, damage, delays, changes in shipment schedules or failure to deliver caused by accident, fire, strike, riot, civil commotion, insurrection, war, the elements, embargo, failure of carrier, inability to obtain transportation facilities, government requirements, acts of God or public enemy, prior orders from others or limitations on AVERY DENNISON s or its suppliers products or marketing activities or any other cause or contingency beyond AVERY DENNISON s control. 12. CHOICE OF LAW: This agreement shall be governed by and construed in accordance with the laws of the State of Ohio. 13. ENTIRE AGREEMENT: These terms and conditions embody the entire agreement and understanding between the parties, are intended as a complete and exclusive statement of the terms of agreement regarding the products set forth on AVERY DENNISON s Sales Order between the parties, and supersede any prior or collateral agreement or understanding between the parties relating to the subject matter hereof. PURCHASER acknowledges that AVERY DENNISON has not made any representation to PURCHASER other than those, which are specifically referred to or contained herein. Each paragraph and provision hereof is severable and if any provision is held invalid or unenforceable, the remaining provisions shall nevertheless remain in full force and effect. Avery Dennison stus.averydennison.com 35

36 Regional Headquarters, Manufacturing Locations, Specialty Tape Division North America South America Europe Asia Painesville, Ohio 250 Chester Street Building 5 Painesville, Ohio Phone: Fax: Vinhedo, Brazil Rua Francisco Foga No vinhedo, SP Brazil Tel: Fax: Turnhout, Belgium Tieblokkenlaan 1 B-2300 Turnhout Belgium Phone: +32 (0) Fax: +32 (0) Kunshan, China Kunshan City, No.9 Yaoning Rd Kunshan Economic & Tech. Dev. Zone Kunshan, CHN Tel: Fax: Specialty Tape Division 250 Chester Street Painesville, OH GO-AVERY ( ) / FAX ADV# 0046, 10/08 Printed in U.S.A Avery Dennison Corporation, All Rights Reserved. Avery Dennison is a registered trademark of Avery Dennison Corporation. Avery and all other Avery brands, product names and codes or service programs are trademarks of Avery Dennison Corporation. Avery Dennison EcoFriendly is a trademark of Avery Dennison Corporation. This mark indicates that these products and materials were produced with environmentally beneficial features.