G-Schedule Part A (Civil work) RATES & SPECIFICATION ARE AS PER RAJ. P.W.D. BSR 29 July 2013.( Udaipur Circle)

Transcription

1 Name Of Work:- Construction of Homeopathic college Hospital building at dabok Campus of Janardhan Rai Nagar Rajasthan Vidyapeeth (Deemed )University Pratap Nager Udaipur ( Raj.) Part A (Civil work) RATES & SPECIFICATION ARE AS PER RAJ. P.W.D. BSR 29 July 2013.( Udaipur Circle) 1 2/1.8 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as within a lead of 50 Mtr. All kinds of soil Cum /3.2.6 P&L cement concrete including curing compaction etc. complete using stone aggregate nominal size 20mm. in foundation plinth, excluding the cost of shuttering, Cum using 1:3:6 mix. 3 7/1.33 Filling in plinth with locally available River shingle under floors including watering ramming consolidation and dressing complete including lead up to 50mt. And lift up to 1.5mt Cum /11.44 Random rubble dry stone kharanja under floor Cum Random rubble stone masonry for foundation and 5 30/6.1.7 plinth in cement sand mortar 1:6 for above 30 cm thick Cum walls. 6 17/4.1.2 P&L in position M-20 grade of cement concrete for all R.C.C. structural elements upto plinth level. including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement : 3 Coarse sand) and making good the joints, excluding cost of centering and shuttering and reinforcement.for column, footing Cum a 17/ / /4.6 P&L in position M-20 grade of cement concrete for all R.C.C. structural elements up to floor three level. including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement : 3 Coarse sand) and making good the joints, excluding cost of centering and shuttering and reinforcement.for column P&L in position M-20 grade of cement concrete for all RCC structural elements up to floor three lvl. including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement : 3 Coarse sand) and making good the joints, excluding cost of centering and shuttering and reinforcement.for beams, roofs chhaja,lintels, stair case etc. Centering & shuttering with plywood or steel sheets including starting & propping, bracing both ways and removal of from work for foundation in basement rafts footing, straps beams, bases of column etc. up to plinth level Page 1 of Cum Cum Sqm

2 9 19/4.7.3 Centering and shuttering with plywood or steel sheets, including strutting, propping, bracing both ways with wooden members and removal of form work for upto floor three lvl for columns, pillars, posts and struts etc Sqm / / Centering and shuttering with plywood or steel sheets, including strutting, propping, bracing both ways with wooden members and removal of from work for for upto floor three lvl for suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, copings, bed plates, anchor blocks, sills, chhajjas etc. Providing and fabricating steel reinforcement for RCC work including cutting, bending placing in position and binding complete including cost of binding wire in roof column, beams etc. for super structure. Hot rolled deformed (IS:1139) cold twisted (IS:1786) Bars Sqm Kg / /5.8(a) +5.9 Brick Masonry in super structure upto 3rd. storey from plinth level in CM 1:6 with bricks of class designation 75 inch. Half brick masonry in super structure up to 3 rd storey height form plinth level with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 Coarse sand) Cum Sqm Plaster on new surface on wall in cement sand mortar 14 1:6 including racking of joints etc. complete fine 122/ finished for above 4.5 Mtr. height form plinth level 20 mm thick a) Inside walls ( New) Sqm b) Exterior walls Sqm /12.18 Plaster on new surface of ceiling in cement sand mortar 1:4 including racking of joints etc complete fine finished 20 mm thick. Add extra item no to Sqm / for plaster done over ceiling Polished Blue Kota stone Flooring, Skirting, laid over 20mm thick base of CM 1:4 and jointed with gray cement slurry to match the shade of the slab including rubbing and polishing complete for area of each slab from 2001 to Sq Cm. 25mm thick slab Sqm /7.7 P & F 1st quality vitrified porcelain polished tile on floor, skirting and steps etc. in different sizes ( thickness to be specified by manufactuer ) with water absortion less than.08% and conforming to IS of approved make in all colour shade with 20 mm thick CM 1 : 4 Including grouting the joints with white cement and matching pigment etc complete SIZE 600 MM X 600 MM SIZE 900 MM X 900 MM Sqm Sqm Page 2 of 8

3 18 114/ Polished Blue Kota stone slab in steps,walls having fine machine cut edges laid over 12mm thick base of CM 1:3 and jointed with gray cement slurry to match the shade of the slab including rubbing and polishing complete for area of each slab from 2001 to Sq Cm. 25mm thick slab Sqm /7.3 P & F First quality standard white/ivory,grey,fuma,red brown, light green, light blue and other light shade glazed tiles of (confirming to IS : & IS 13622) of size 300mm X 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete ( excluding the cost of cement plaster on walls & pillars) Sqm /7.6 P & F First quality Mat Finished Ceramic tiles white/ivory,grey,fuma,red brown, light green, light blue and other light shade glazed tiles of (confirming to IS : & IS 13622) of size 300mm X 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4) Supplying & Fixing in walls machine cut both side 21 35/ polished stone shelves, tends an drills in CM 1:3 with machine cut edges kota stone 25 to 30 thick 22 Plaster on new surface on walls in cement sand 122/12.8 mortar.1:4 including finishing with neat cement complete 25 mm. Thick 23 Providing brick kharanja in cement sand mortar 1:4 in 96/ square pattern over roof of first floor.75mm. to mm thick average / / Finishing with 25m thick cement plaster on roofs in cm. 1:4 thick including water proofing compounde2% of cement used with neat cement finishing curing etc. complete in all Respect Wall painting with plastic emulsion paint of approved brand & manufacture to give an even shade two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm sqm SQM sqm sqm Sqm / /5.12 Brick work in partition in superstructure up to third story 7 CM thick ( brick on edge ) using brick designation 75 in low cost shree binder & sand Mortar (1:2) Providing brick in half brick or brick on dedge 5 to 7 cm. Projected from wall face in brick of class designation 75 in cement mortar 1:4 ( 1 Cement :4 coarse sand ) for cornices corbelling and coping etc. up to third storey. Page 3 of Sqm Rmt

4 28 83/ P & F pressed steel mitered doors frames manufactured from commercial mild steel sheet of 1.25mm ( 16 gauge ) thickness including hinges jamb lock jamb head and if required angles threshold of mild steel angles of section 50X25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means adjustable lugs with split and tail to each jamb including butt hinges 2.5mm thick with mortar guards lock sticks plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-Charge Rmt / A 84/ /16.1 P&F steel gate grating and grills made of Hollow tabular section or other flats black pipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. Add extra of sq. rectangular, hollow, tabular section are used P&F steel gate grating and grills made of Hollow tabular section or other flats black pipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. Add extra of sq. rectangular, hollow, tabular section are used Providing and fixing anodized aluminum work for doors,windows,vents & partitions with extruded builtup standard tabular & other sections of approved make conforming to I.S.733 & I.S anodized transparent 81 dyed to required shade according to I.S complete fixing as per necessary fitting all complete as per architectural drawing Kg Kg fixed portion Kg Open able shutters for D&W. with fitting Kg Sliding shutters for windows Kg P&F Expanded grill made of anodized aluminum as per design drawing having members section of size / mm.x6mm. & opening of size 102mm. X 99mm. To aluminum window with required fitting complete in all respect Sqm P&F glazing in aluminum door, window shutters & /16.3 partitions etc. with pvs/ neoprene gasket etc. complete as per architectural drawing & the direction of engineering in charge (A) 5mm Thick plain glass as per Is SQM (B) 5mm. Thick tinted glass panes SQM /16.13 Polyester power coating & electro coloring in various color and shade approved by engineer In charge for aluminum door & windows Sqm Page 4 of 8

5 34 20/ / P& F precast cement concrete jali, nominal mix 1:2:4 reinforced with 1.6 mm dia. MS wire including centering and shuttering roughing, cleaning and finishing etc. complete as per approved design upto floor three level 50mm thick Providing & fixing 12mm. thick prelaminated three layer medium density (exterior grade ) particle board grade 1 st type 2 nd conforming to IS : bonded formaldehyde in paneling frames fixed in aluminum doors, window shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer in charge. Pre-laminated particle board with decorative lamination on both side / P & F Nigeria/Ghana teak wood grade 1st mouldings and bedding in doors and windows size 25x12mm /16.7 P&F Brass lock without handle for aluminum door of approved quality, make & design P&F external grade board solid core single leaf flush door shutters I.S.I marked using phenol formaldehyde resin in glue both side with using Teak 38 70/ veneer ply ply on both face of shutter & 6 mm thick beading of respective wood using with approved brass fitting as per annexure A 35 mm thick sqmt sqm Rmt Each sqmt / P&F of P.V.C. door frame made from extruded P.V.C. section having multi chamber cross sec. with a max wall th. of 2.8mm. duly reinforced with steel tie rod at bottom and weather seals complete P.V.C. door frame section (53x60mm) Rmtr /16.16 P&F of Plastic shutter Infill made from extruded multi chamber hollow P.V.C. sections having cross section of 200x20x1mm and shutter frame made from Extrude P.V.C. section in the configuration of double walled C- section having an over all cross section of 40x37mm and door fitting such of hinges, aldrop, handles, stopper, locking bolt will be provided Sqm / P&F external grade board solid core double leaf flush door shutters I.S.I marked using phenol formaldehyde resin in glue both side with using Teak veneer ply ply on both face of shutter & 6 mm thick beading of respective wood using with approved brass fitting as per annexure A 35 mm thick sqmt Page 5 of 8

6 42 NON BSR Item Wall finished with ready made super sandla (gutai ) as epr direction of engineer - in- charge Sqm / P&F steel glazed doors windows and ventilators shutters of standard rolled steel section joints mitered and welded with steel lugs 13x3 mm, 10cm long embedded in cement concrete block 15x10x10cm of 1:3:6 or with wooden plugs and screws or with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panel 3mm thick with glazing clips and special metal sash putty of approval make or metal bidding with screws complete including priming coat of approval steel primer excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc as required windows side hung open able sqm / Supplying & fixing fixed wire gauge of 14 meshx24 gauge to the metal frame of rolled section by mental beading 20x3mm with suitable screw at not exceeding 150mm distance sqm /9.32 P&F square bars or other flat welded to window, ventilators etc Kg /9.41 P&F angle iron from 25x25x3mm for ventilators with fixed wire gauge 16 mesh 24 gauge into 100mm sqm Painting with enamel paint of approve brand and manufacture in all shades to give and even shade. 132/ New steel and wood work (two or more coats) sqm P & L Chequered plain cement concrete. Embossed or specially manufacture non slipping 9-12 mm. ironite /11.33 topping tiles of approved make 20mm. thick laid on sqm mm. thick bed of C.M. 1:6 jointed with neat cement slurry complete / P&F M.S. sheet 20S.W.G. single leaf door shutter in angle iron frame 35x35x5mm. suitably diagonally braced with 25x3mm. flat iron above & below lock rail of size 50x5mm. bidding extra including all fitting etc. 17 Sqm /12.5 Applying Birla /J.K.White cement. Based putty over cement. Plaster surface for making even surface Sqm / Providing and fixing stone slabs table rubbed, mm thick in walls, steps, pillars, Counters, Jambs, shelves, Sills etc laid on 12 mm (Av) thick base of CM 1:3 ( 1 cement : 3 coarse sand ) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust ) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing.kesriaji ( Rishabdeo ) GREEN MARBLE 1501 cm2 to 3600 cm2 tiles Sqm Page 6 of 8

7 52 49/ A 49/ Extra for providing edge moulding to 18 mm thick marble stone counters, vanities etc over item no. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer In Charge. Marble Extra for providing edge moulding to 18 mm thick marble stone counters, vanities etc over item no. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer In Charge. Granite work Rmtr Rmtr / /11.58 Cement concrete flooring grade 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate ) rounding off edges etc. but excluding the cost of nosing of steps etc. complete:75 mm thick with 20 mm thick nominal size aggregate. Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:2:4 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks: 1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color: Grey cement natural colour 4) Variation in dimension: Less than 1.6mm. 5) Variation in thickness: Less than 3.2mm 6) Abrasion: As per BS: 6717: Sqm cum / / / / mm thick interlocking blocks 80mm thick interlocking blocks Add extra over item no and for (Red Color) Sqm Sqm Sqm Providing batta (gola) 75x75mm in C.C. (1:2:4) including finishing with C.M. 1:3 as per standard design Rmt Page 7 of 8

8 / / Cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) with water proof compound as per manufacture's specification. Cement mortar 1 : 3 (1 cement : 3 coarse sand). Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).with 75mm opening when closed Sqm Cum Cum sqmt Add extra for mirror polishing on stone flooring 1900 sqmt Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse 61 shade of the granite slab complete including rubbing and polishing of :Green / Black / Other granite ; 1501 Cm2 to 3600 Cm2 Tiles sand) jointing with white cement mortar 1:2 (1 white 46/ cement : 2 marble dust) with pigment to match the 455 Sqm Total Rs Page 8 of 8