Doors, windows and fixed glazing. Non-insulated steel and stainless steel systems

Transcription

1 Doors, windows and fixed glazing Non-insulated steel and stainless steel systems

2

3 Steel systems For doors, windows and façades We take our inspiration from nature. The known structural benefits of plant stems and long bones are applied to steel profiles. The very slender profile dimensions mean more light and more scope for creativity. Architects, designers and users value the range of options available. Steel is robust and can withstand mechanical damage. Jansen profile systems are therefore particularly suitable for all buildings frequently used by the public: in commercial and industrial buildings, in schools and hospitals, sports and leisure centres, in service centres and railway stations. Of the materials widely used in building construction, steel has the highest modulus of elasticity, at around kn/mm. The material benefits offer new and interesting options in structural dimensioning, in fire applications, burglar-resistant constructions and in sound reduction. The wide range of products also includes thermally insulated systems and stainless steel profiles. Doors, windows and façades are created using Jansen tubular steel profile systems. Industrial pre-fabrication means simple, time-saving and cost-effective manufacture. Our comprehensive range of profiles is complemented by a complete range of fittings and accessories, and by ophisticated fabrication tools. In addition to technical documentation and specialist «Janisoft» planning software, comprehensive consultancy and training is available for architects, designers and fabricators.

4 Jansen-Economy doors Elegant solutions always create the right impression This profile series is characterised by its simple profile geometry, slender structures and maximum stability. This means streamlined production and economical installation. Single and double-leaf doors, with moving and/or fixed glazing toplights and side sections: constructions with Jansen-Economy and offer potential for creative solutions to meet any building requirements. The Jansen-Economy and Jansen-Economy door constructions have an impressive flush-fitted design, continuous shadow joints inside and outside, and a double rebate gasket. An automatic seal or rebate gasket can be fitted around the threshold if required. Jansen-Economy anti-finger-trap doors. Safety and design are perfectly combined. The rounded half profiles minimise the risk of injury at the secondary closing edge. This then prevents crushing and shearing points as per DIN 186. With maintenance-free, highperformance hinge bushes, Jansen-Economy anti-finger-trap doors are particularly suitable for buildings with high frequency use by the public, e.g. shopping centres, schools or hospitals. Jansen Economy anti-finger-trap doors meet the product standard EN for external doors and are CE certified. The cable link connector from the frame to the leaf is concealed in the top hinge bush. Integrated door closers and automatic side-hung door drives can also be installed. The Jansen Economy systems have successfully passed the tests laid down in the product standard EN On this basis, manufacturers can label windows and external doors with the CE mark which is obligatory throughout the EU.

5 Jansen-Economy windows A slimline look is en vogue With a basic depth of just mm (and 58.5 mm for the vent profile) Jansen-Economy is also suitable for use for window vents: side-hung turn/tilt, double vent and bottom-hung vents. Fully-tested, systemspecific fittings are available for all opening types, complemented by attractive window handles in aluminium or stainless steel. Jansen- Economy window constructions have a centre gasket in the area around the window rebate plus a rebate gasket on the room side.

6 Profile range Jansen-Economy doors and windows Z Z Z GV+GC Z Z Z Z Z Z Z Z Z Z Z Z Z Z 6

7 Z Z Z Z Z GV+GC GV+GC , GV+GC GV+GC GV+GC Z GV+GC GV+GC Z = made from hot-dip galvanised steel strips, lightly oiled (75 g/m² zinc coating on both sides = approx. μm inside and outside) GV+GC = galvanised on the outside (approx. 15 μm) and yellow chromated 7

8 Profile range Jansen-Economy doors and windows Z Z Z Z Z Z Z GV+GC GV+GC Z Z Z Z Z = made from hot-dip galvanised steel strips, lightly oiled (75 g/m² zinc coating on both sides = approx. μm inside and outside) GV+GC = galvanised on the outside (approx. 15 μm) and yellow chromated 8

9 Z Z GV+GC GV+GC GV+GC GV+GC

10 Jansen-Economy doors Example of application - - Alternative Z Z Z.007 Alternative Z // // Z //

11 Z A-A Z C-C Z Z C C A A mm The practical examples are available as DXF files at 11

12 Jansen-Economy windows Example of application C-C E-E Z Z Z 0.1 Z

13 A-A Z 0.11 Z Z D-D Z 0.1 Z E C A A D D C mm E The practical examples are available as DXF files at 1

14 Jansen-Economy stainless steel For all requirements Jansen-Economy stainless steel profiles are now available in two different qualities. oth modern materials 1.0 (AISI 16L) and 1.07 (AISI 0L) are based on the latest findings in steel research. They are specially tailored to architectural and functional requirements in normal or in aggressive atmospheres. Use specific to requirements affords significant optimisation of material costs. Profile shapes and basic depths are identical to Jansen Economy steel profiles. This makes it easy for the designer to combine the profile series and for the fabricator to use identical accessories. An attractive range of stainless steel fittings has been added to the comprehensive range of products for windows and doors. Material 1.07 (AISI 0L) is preferred for normal, non-aggressive atmospheres without chloride and salt concentrations: In a rural environment In residential and industrial areas Indoors Purely for architectural requirements Material 1.0 (AISI 16L) is also resistant to atmospheres containing chloride and salt. It is particularly suitable for use: In industrial areas In coastal areas In areas with strict hygiene requirements Near roads (with a salt load) 1

15 Profile range Jansen-Economy stainless steel Surface finish: plain rolled, exposed faces can be polished on request 15

16 Economy stainless steel Example of application foor doors / A-A / Alternative // A A mm 16

17 Economy stainless steel Example of application for windows A-A / / / / A A / mm 17

18 Economy folding wall Flexible room design Steel folding wall. This folding wall is based on the non-insulated Jansen-Economy system. Flexible in use, the Jansen folding wall system can be used as a room divider as well as for outside areas, and can be inward or outward-opening. A compatible range of fittings and accessories ensures proper, smooth and quiet operation. A range of designs is available for the threshold. Depending on the size and loading, profiles with a face width of mm or mm can be used. The loadbearing capacity of the top running gear is up to 0 kg, which permits leaf weights of up to 0 kg.

19 A - A Z // A mm A 19

20 Folding and sliding doors A smart move For folding and sliding doors, Jansen provides a co-ordinated range of profiles with basic depths of and mm, as well as accessories and fittings to meet all requirements. The folding doors can be rebated behind, in or in front of the opening. They can be designed as inward or outward-opening doors, and with any leaf division. Sliding doors come into their own when a space-saving design is required. Infill panels or glass infills can be used to meet increased demands for high-quality products. The range of profiles and gaskets is suitable for both manually and automatically operated door systems. The complementary fittings are also fully tested and guarantee a long service life with reliable, quiet and smooth operation. Jansen folding doors are tested in accordance with EN 11-1 together with drives from Gilgen, a leading drive technology company. In this way, we provide our partners with the necessary prerequisites for CE marking, which will soon be a strict legal requirement for both manual and automatic doors.

21

22 Folding doors Examples of application m-5 and m Alternative ø Z Alternative // ø ø

23 A-A (m-5) / 051 A-A (m-) /5/ / 051 A A mm

24

25 Standard profiles Giving you a clear view Doors and windows. The comprehensive range of profiles with basic depths of 0,, and 80 mm opens up considerable design freedom for doors. Functional and attractive single and double-leaf designs are possible, with side sections and toplights, as curved doors or swing doors. With fixed glazing, the excellent structural properties of steel are clear to see. This means that slender frame dimensions and torsion-resistant units are possible, even for large-scale constructions. A comprehensive range of fittings for door and window constructions, and practical examples support streamlined production. Standard window profiles Frame doors Pilaster profiles Swing doors

26 6 Profile range Standard profiles mm

27 Trim profiles Pilaster profiles GV+GC

28 Doors and swing doors Example of application - D-D Z Z // Z Z Z // Alternative 8

29 A-A Z Z C - C Z Z A' A' A A A A mm The practical examples are available as DXF files at 9

30 Windows Example of application D - D A - A Z Z Z Z.007 C - C F D E E C C F D mm 0

31 Pilaster and trim profiles Example of application Z.006 A-A Z Z 0 C - C 8 Alternative C - C A A Holz Z 17 0 Alternative C - C Holz 1.0 C C MM M 1:1 1

32

33 Personal profiles Attractive and economical Here is a series of examples of different combinations of Jansen system profiles with add-on steel tubes or drawn flat steel. These lightweight steel profiles provide architects and designers with a range of creative possibilities for the design and construction of doors, windows and façade units. Use our configurator to help you create your own personal profile quickly and easily. Personal profiles give the designer greater freedom Range of designs and functionality due to an almost unlimited modular system Existing profiles individually connected to standard add-on profiles using the very latest laser welding technology Continuous welding and an even, barely visible weld seam Personal profiles make steel systems attractive and economical High level of precision for efficient fabrication Even small quantities can be manufactured economically No tooling costs for many new profile combinations Simplifies procurement and production planning for the fabricator

34 Glazing beads Steel and aluminium Steel glazing beads made from hot-dip galvanized steel strip (length 6 m) Aluminium glazing beads (length 6 m) Steel angled glazing beads (length approx. 6 m) GV+GC 6.8 GV+GC 6.9 GV+GC Aluminium glazing beads (length 6 m) Z Z 0.1 Z 0.1 Z 0. Z 0.15 Z

35 System versatility The right system for every application Systems Windows Doors Façades Fixed glazing Partition walls Conservatories Fire protection Thermal insulation Safety and security Systems specifications Janisol asic depth of doors mm asic depth of windows /6 mm Doors and windows CE tested, anti-finger-trap door, folding wall, burglar resistance WK and bullet resistance, steel and stainless steel Janisol Primo asic depth /6 mm Windows CE tested, burglar resistance WK and bullet resistance Janisol Arte asic depth mm Windows CE tested, inward and outwardopening windows, very slim face widths Janisol asic depth mm Doors and fixed glazing, fire resistance tested to EI0, smoke protection,burglar resistance, steel and stainless steel Janisol C asic depth mm Doors and fixed glazing, fire resistance tested to EI and EI90, smoke protection VISS TV Face width / mm Mullion-transom construction for vertical glazing, dry glazing, CE tested, burglar resistance WK and bullet resistance VISS TVS Face width / mm Mullion-transom construction for vertical and sloped glazing, dry glazing, CE tested, burglar resistance WK and bullet resistance VISS Fire Face width mm Mullion-transom construction for vertical and sloped glazing, tested for fire resistance to E90/EI90 VISS SG Face width / mm Structural glazing façade based on the tried-and-tested VISS system VISS asic / VISS I x tra Construction for steel and stainless steel façades for mounting on any support Jansen-Economy asic depth of doors mm asic depth of windows /58.5 mm Doors and windows CE tested, anti-finger-trap door, fire resistance tested to E0, smoke resistance, bullet resistance, steel and stainless steel Jansen-Economy asic depth mm Doors CE tested, anti-finger-trap door, fire resistance tested to E0, smoke resistance, burglar resistance and bullet resistance Standard profiles asic depth 0,,, 80 mm Hollow steel profile series for swing doors, pressed steel doors, horizontal pivot windows and pilaster profiles Folding and sliding doors asic depth:,, 80 mm Hollow steel profile series for automatic or manual folding and sliding doors, CE tested 5

36 Jansen AG CH-96 Oberriet SG SW 598 / /1 / Subject to change